Danny, way to go! I don't know how you make all these things from scratch, but I'm glad you do. Congratulations! You are a pioneer and I hope you post more flights soon :)

@onedoodadyoung

2 жыл бұрын

Thanks Chad it is better than our winch days. I hope to soon catch the thermal to cloud base!

I LOVE Pioneers. . . where would we be without them? BRAVO!!!

@onedoodadyoung

3 ай бұрын

Thank you sir, I love building new things!

Nice airfield and the setup too 👍

Very nice job 👍

Браво! Карманный самолет1

@onedoodadyoung

Ай бұрын

thank you sir

Молодец мужик!!!

total que bueno me ha gustado un invento sencillo pero práctico gracias por la información y tú tiempo qué tengas un buen día compañero

@onedoodadyoung

11 ай бұрын

Me alegro de que te haya gustado. ¡Solo vivo a unos 8 km de la franja de hierba de mis amigos y es muy agradable volar!

Really cool. This is what KZread is all about!!

Nice setup for unassisted flights in flat terrain! I didn't know battery power could get you up that high! For people with disabilities,such as arthritis,this is fantastic!

@onedoodadyoung

Ай бұрын

Yes, I had to have both knees replaced. also good if you live in the flat lands of KY.

I was thinking about this model.. And trying to find video like this ...but its very difficult to find # so thanks for making this Video❤

@onedoodadyoung

Жыл бұрын

glad you liked it

@muhammadnazri-fk4ct

Жыл бұрын

​@@onedoodadyoung thanks again for your fast response😊

Very nice. Great job. I think, if the batteries were placed below the upper pipe would give you more room for your harness. It loos like you do not have upward movement for your legs since the batteries are on the way. Just my opinion. I am building a similar system... Thank you for the video. Made me inspired.

@onedoodadyoung

Жыл бұрын

Thanks for watching glad you enjoyed it

Awesome machine !

@onedoodadyoung

Жыл бұрын

thanks your username is awesome!

@FLYNRYAN1978

Жыл бұрын

@@onedoodadyoung thanks i was fortunite to get that before someone else did . Ive been building a trike but have always wanted to figure out a way to fly a hang glider with a paramotor .

Love it!

@onedoodadyoung

11 ай бұрын

Thank you, me too!

Can I come watch? I’m in Corvallis

Very good, but you didn't think about the fire, if these batteries catch fire on your back, it's dangerous! I am a modeler myself and saw with my own eyes how it happened to my friend.

@onedoodadyoung

11 ай бұрын

Thanks for your concern.

legend has it hes still up there

Hi! Very nice flying. Have you rebuild the original schwarze-minimum system, or you build the unit from scratch? I'm asking because I try to find used original minimum, and now its very problematic :/

@onedoodadyoung

Жыл бұрын

Thank you, I had seen that original minimum years ago and liked it. I saw the Flyped and went from there and built this from scratch. This video was the 3rd flight. I have since lengthened the tubes 5" going to the harness to correct the thrust angle to be more parallel with air flow and lowered my hang point. Testing props now. I am very pleased with the unit.

Nice job! Is this something you designed? I'm working on a project to install an electric motor on my glider and would be interested in the component details: batteries, controller, motor, prop manufacturer and diameter.

@onedoodadyoung

2 жыл бұрын

Hello Rick, The design comes from Europe I think I first saw this setup In the late 70s. and it was called a Minimum system. I just made my own version of it for electric. It is made up of very large RC equipment. the motor is an out runner with 95 KV on 16s or 67 volts fully charged it is rated at 8000 watts output. I am running 110 to 120 amps at 67 volts or 8040 watts. I have a 2.5 to 1 cog belt reduction drive giving my prop 2546 rpm. but it tacks at around 2200 with a 51x26 prop. So far it has worked the best giving a climb rate of around 200'/m. I am making a 52x30 to see if I can improve speed a little. I am climbing best around 20 to 21 mph. The batteries are 4s cells 14.2v at 8000ma, x 4 series =67v x 3 parallels gives me 24AH. I used 6600ma in 10 min at full power and climbed to 1200 in lift and sink. My set up is working and it is not the top of the line my any means, but the paraglider folks are making good power systems and there are lots of things coming along in Eruope. My ESC is 300amp 16s Alian brand but not good service. The Motor is called Watts Big and is out of business. The speed controller is a RC servo tester. If you google Radar Bernstein his ehelp videos shows epower setups and how it all works. If I can help you in any way that I can I will be clad to. If you want to call me Message me and I will give you my #. I carve my own folding props and it comes in handy trying to get the most out on the motor. I hope this helps. Danny

I like this idea of attaching the engine to the glider too. But isn't the angle point a bit too downwards? Your hangloop looks quite short, I think that would be the easy fix

@onedoodadyoung

2 жыл бұрын

You are very observant yes you are correct I have Lengthened the tubes to the harness and also going to Lengthen the hang loop to correct that. downward angle thanks for the observations

This guy is not just cool Super Cool!!

@onedoodadyoung

3 ай бұрын

Thank you sir!

Looks good but i prefer my soaring trike. Bit more comfort as i age . Climb looked really good looks stable

@onedoodadyoung

Жыл бұрын

Thanks, I have always wanted a soaring trike. maybe someday.

@whisperingeagle

Жыл бұрын

@@onedoodadyoung well i truly miss the light wing loading of hang gliding. My soaring trike isnt quite as good. But the plusses are i dont need a driver, i have more options on where i can launch, i can go around as much as i want on a lz. My range is exstended and more comfortable. So alot of safety is built into that. But the advantage of flying a lighter wing loading and taking off prone is really atractive on your video and design. Truth is what all of us glide heads really want are real bird wings on are back. Fly safe my friend

*Have you thought of mounting the motor in the front part of the front structure where the strong tubes are located so that the propeller pulls in this way you avoid all the mounting in the rear part with two wheels in the triangle you could take off from the ground in the same way. greetings.*

@onedoodadyoung

9 ай бұрын

I have not thought of that, thanks

@angargoy7181

9 ай бұрын

@@onedoodadyoung OK

Very beautiful ❤️

@onedoodadyoung

11 ай бұрын

Thank you very much!

What size motor and batteries?

Good build, looks to handle quite nice! Wish someone would sell plans for flphg units. I love building but wouldn't know where to start n the important things to watch for.

@onedoodadyoung

4 ай бұрын

Thanks, I used the minimum system to start from and it was a lot of trial and error, batteries, motors, ESCs, and 8 different props. I was determined to make it work and it does a good job for what it is designed for, one shot to thermal altitude!

@flyingtime5501

4 ай бұрын

@@onedoodadyoung nice...where can I find any info on the minimum setup. I can't find anything except I think I seen n old vid of it flying years ago. I'm proficient with building all the electronics n even prop stuff, I'm more concerned with airframe imbalances n torque management.

@onedoodadyoung

4 ай бұрын

let's talk 7194018256

al estilo oruga con alas

The positive angle of attack 19 to 23 degrees seems a bit much, how close are you to stall speed? Cruise speed?

@onedoodadyoung

10 ай бұрын

Bill, thanks for your interest and observations. This flight was one of the first flights and the angle was too high. I lengthen the tubes to the harness and used a streamer to check the angle of thrust. I am happy with the setup although more power and speed would be nice,

That's great.

@onedoodadyoung

Жыл бұрын

Thanks got todays flight uploading soon.

this is absolutely brilliant, i was wondering if this rig existed, it seem like a hustle to go up a mountain to catch wind or being dragged by a truck, not to mention i rather be in a motorized vehicle than one that is hundred percent at the mercy of mother nature, mother nature can be a b0tch some times. do you have videos on how to build one or you sell them?

@onedoodadyoung

3 ай бұрын

If you subscribe to my channel I have a video that shows about the system and the components. I do not sell the units, thanks for your interest.

good job man. I hope I can convert my wasp unit to a wheeled launch. it take forever😭😭😭

@onedoodadyoung

Жыл бұрын

Yes Reidar started all this and is my mentor! Good luck with the build.

Is this an electric motor? Thrust? Run time? Awesome project!

@onedoodadyoung

11 ай бұрын

Yes it is a 8000w 95KV outrunner with 2.5 redrive running on 16s 24AH lipos. I have no way of measuring the thrust but it is enough to climb to thermal altitude 1200 to 1600 with a run time of 10 minutes at 22 mph. Check out my other videos and there is one that explains the whole setup. Glad you liked it.

Мотор не должен быть жёстко закреплён. Вектор тяги направлен под углом снизу вверх, а не вдоль направления полёта.

@onedoodadyoung

Жыл бұрын

Sir, you are correct in that the motor angle is is pointing up to much. This was the first flight with video, seeing this I corrected by lengthened the tubes to the harness 5" to correct the angle as you can see in the later flights. thanks

👍

@onedoodadyoung

Жыл бұрын

Thanks glad you liked

厉害了，这都飞起来了。

@onedoodadyoung

11 ай бұрын

language please?

Now this has my attention

@onedoodadyoung

Жыл бұрын

Flat land fun glad you like it!

@motiv311

Жыл бұрын

@@onedoodadyoung what type of wing works well in this config? which one would be cheapest on the used market?

@onedoodadyoung

Жыл бұрын

DJ, I have a Falcon 195 and it works well. I am 72 and I had a U2 160 and I had to get a lighter wing because I have a bad back. any wing will work if you can remove or cut the keel to clear the prop, and handle the extra 50 lbs.

How many feet you went up?

@onedoodadyoung

2 ай бұрын

with no thermals I can get 1200 to1600 agl on a charge.

I've wanted to see about doing this. Do you feel like a bird gliding in the sky???

@onedoodadyoung

Жыл бұрын

Yes its like being Superman, bird or an Angle. Highly addictive!

@kendixon6437

Жыл бұрын

@@onedoodadyoungI'm filling out some of my bucket list and I really think this will help 🙏 Thank You Sir And God Bless 🙏

@onedoodadyoung

Жыл бұрын

@@kendixon6437 Thanks I forgot to mention that if you have ever had a dream that you were flying it is just like that but in real life!

@kendixon6437

Жыл бұрын

@@onedoodadyoung the closest I've come so far has been on a zip line and I love the feeling. Thanks for the insight it sounds great 👍

Everyone should call the non emergency (annoyance line) or the airport whenever they hear and see one one of these noisy polluters flying around making a racket. Hopefully the FAA will start requiring these guys to follow the same regulations as other motorized aircraft. It's only a matter of time before these guys screw everything up for us air powered pilots.

@onedoodadyoung

2 ай бұрын

Sir, I fly under FAA part 103 Regs, and it's silent Electric powered !!

@CoIoneIPanic

2 ай бұрын

@@onedoodadyoung I stand corrected.

Max thrust?

@onedoodadyoung

Күн бұрын

Sorry I had no way to measure the thrust. my 52x24" prop gives me 200fpm climb at 20mph with full charge.

Thanks to lithium ion batery

@onedoodadyoung

2 күн бұрын

LiPo 24AH

Why don't you use a termic motor style mosquito ? jf

@onedoodadyoung

Жыл бұрын

I like taking off on the wheels no running

How to bring it down

@onedoodadyoung

11 ай бұрын

shut down motor and find sink!

I want to make

@onedoodadyoung

10 ай бұрын

You can check out my video on this channel showing the details of the unit, if you have more questions just ask be glad to help

Can you please give me this one?

@onedoodadyoung

2 ай бұрын

Sorry no, but it is for sale 4300

Vodka in the water bottle, absolute classic. I see past your bullshit.

@onedoodadyoung

3 ай бұрын

Kentucky moonshine!!!

Jupiter'jesus allah Son 👽 MAREEKH

@onedoodadyoung

11 ай бұрын

Thank you, what language is this so I can translate?