Hi Ivan, nice trike. I see that after take-off you fly very long with the bar pushed forward. You have to be careful with that. If you do that you fly the wing almost in a stall. The moment your wheels are of the ground, have the bar neutral or even better, have some tension on the bar, pull it a bit. This way you have a little more speed during take-off. This is important when you might have an engine failure during take-off. And that can happen. If you do not climb with the bar neutral your engine does not have enough power or the trike is over weight. It is dangerous to fly like that. Greetings from the Netherlands. P

@ukranger7

3 ай бұрын

Hi Peter. Thank you for your comments and suggestions. The more time I fly, the better skills and experience I gain. Best regards.

@quantumss

2 ай бұрын

@peteropheij6737- Very good advice. I was going to make the same comment. Maybe I should.

Sure is great getting that first one out of the way. Think about your bar position.

Well done, takes a lot of guts to do that. Well done Ivan.

Good job!! Nice to see you in the sky!👌🏼👌🏼

Chào bạn nhiều lắm giỏi quá nhiều lắm cũng chia sẻ với mọi người đều biết nhẹ video này nhé 👍🥰🥰

Hi Ivan, congrats for you successfull first flight with your aircraft. I am so happy that you decided to use the Monotrike from Marcin. Please next video put in the description the marker Monotrike than all of our community will get you movie from YT automatically. Thanks and always happy landings. Best Regards from Germany 🤙

uffffff brother genial sepa usted que desde tenerife lo ayude armar su ala y poner todo a punto jajajjajajajjjaj me lo goce hasta lo ultimo, felicidades el 1er solo es la proesa mas grande que se puede experimentar, dominar esa bestia es lo maximo

Красиво и правильно сделали что перекрестились я бы тоже так сделал и каждый раз...

Nice flight, congrats on a successful Solo. MonoTikes are nice units. Cheers

@ukranger7

8 ай бұрын

Thank you.

Лучше любого Авто

I like the strutted wing..I have a cabled wing. 220 dreamwing

❤❤❤❤ exelente, debe ser magnífico experimentar el vuelo en las alturas..

@ukranger7

2 ай бұрын

Thank you very much!

Thanks for video. First Flight..!!

ผมชอบคลิปของคุณมาก FCจากประเทศไทย❤❤

Very good brother.

Been there done it On cloud nine for a week, so hi just amazing. Back in the seventies your very first flight was solo, no duals back then.

Wow very nice. Improvise jet Sir.

Я чим більше дивлюся відосиків, тим більше стремаюся на тому літати ) Хоча знаю, що воно і без рук само летить

حمدالله على السلامه

Very good brother I want this products hang glider 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

Good start

Your so brave my bro

Richtig gutes Video Ivan

Ivan, very nice video! Great looking little trike too! where are you based?

@ukranger7

28 күн бұрын

Thank you. Milwaukee WI

VERY GOOD SIR

Truc de fou.loco loco😢

Super cute and sweet dreams love you too baby

Hi! Is there any way to know the actual price for that trike? Or where can I ask for information? Fly safe!

So cool

Does that forward support bar serve as a preventative from inadvertently exceeding AOA?

@ukranger7

4 ай бұрын

Hi. Yes, that support bar serves to support the trike as well for preventing from inadvertently exceeding AOA. Best regards!

New new vedo❤❤❤

Nice, you made it look too easy!

@ukranger7

8 ай бұрын

Thank you. I've been hanggliding before, so the concept of weightshifting is the same except now with a trike and engine.

Show 👋🏻👋🏻👋🏻👋🏻🔝

❤❤❤❤❤

Ivan Congratulations very nice trike and great flight , May i know the total height of Control bar of Fox 13 tl, i mean from the hanging point to the centre of control bar. Regards.

@ukranger7

7 ай бұрын

Hi. Sorry for the delayed response. I just measured it. It's about 48" thanks.

@aneesrehman9816

7 ай бұрын

@@ukranger7 Thanks for Reply :)

Hey Ivan, what size is you motor? Reason I'm asking is because I weigh about 225 pounds and I think because of the altitude I'm at in Colorado, I need a healthy motor, at least around 30 Horsepower. I love the grin you had!

@ukranger7

5 ай бұрын

Hi. Thank you. The engine is by Corsair Black Bull 235cc HP 33.

how much is the cost of this Beautiful Ultra light aircraft?

@ukranger7

3 ай бұрын

Hi. Thank you, about 12k.

@user-ze4uc6ej4q

2 ай бұрын

Thank you so much Mr. Ivan@@ukranger7

@user-ze4uc6ej4q

2 ай бұрын

12 k USA Dollars ?@@ukranger7

@ukranger7

2 ай бұрын

Hi. About 12k.

Giá như thế nào các ngài

🎉🎉 First time & nice🎉🎉

@ukranger7

4 ай бұрын

Thank you.

Where did you train ?

@ukranger7

10 күн бұрын

Hi. Self-training.

@pentachronic

10 күн бұрын

@@ukranger7Bold!

Good Job,what's the name of the wing?

@ukranger7

8 ай бұрын

Hi, thank you. Fox 13Tl by Aeros, Ukraine

@nk-rs2hh

7 ай бұрын

Kitne ka h

💕💕🥰🥰💗💗

Where did you learn to fly?

@ukranger7

8 ай бұрын

Hi. First, I learned to hang glide. After that, it wasn't hard to learn to fly ultralights. The concept of weight shifting is the same as it is now with engines and trikes. :)

Sir which engine (name) ,2 stroke or 4 stroke....??

@ukranger7

2 ай бұрын

Hi. Corseair Black Bull 235cc 2 stroke.

@pruthvikn1019

2 ай бұрын

How much cost engine....??

how many price for 1 ultralight ?

@ukranger7

7 ай бұрын

Hi. As a complete package, about $ 15k.

Питання №2 - не зібють?

@ukranger7

5 ай бұрын

😎 F-16

i have always liked Monotrike! do they sell them in United States? also Does any wing can go/fit with Monotrike like Northwing?

@ukranger7

7 ай бұрын

Hi Jason. I do like monotrike too; great trike. To answer your question, as far as I know, no, you can't buy it here in the US. I bought it directly from Poland. In regards to Northwing fitment, honestly, I'm not sure. Sorry that I couldn't answer your question. Best regards.

Hello bro, me from Indonesia, where is your?

@ukranger7

7 ай бұрын

Hi from USA 🇺🇸

@Studiokularis

7 ай бұрын

@@ukranger7 USA, oh ok, i like your vidio it

How much this item please tell me sir I am from India will definitely order

@ukranger7

7 ай бұрын

Hi Aadim. Here is the email to the person who sold me the trike; his name is Marcin. Fly@monotrike.pl. The engine was purchased separately from Italy by Corsair Black Bull 235cc, and the wing was purchased from Ukraine (Fox 13Tl). In regards to the price, I paid about $11,000; however, Marcin from Monotrike might combine a package price; please contact Marcin. Best regards, Ivan

#Ivanzaiats You have got a nice ultralight. How much does exactly like that yours cost please?,tjank you.

@ukranger7

8 ай бұрын

Hi Jac. I bought it all separately and paid about 10k. If you buy it as a package, then about 15k.

@jacmwo9865

8 ай бұрын

@@ukranger7 thank you for the information, happy flying and landing mate.

@ukranger7

8 ай бұрын

Thank you.

@jacmwo9865

8 ай бұрын

@@ukranger7 what is the cruising speed please?

@ukranger7

8 ай бұрын

Average 35 mph

I am bangladeshi. What is the name of the engine? Please

@ukranger7

8 ай бұрын

Hi. It's by Corsair- Black Bull 235 cc, Italian Company. Thank you for watching my video.

How mach weight can carry

@ukranger7

7 ай бұрын

Hi. Fox 13tl wing Clip-in total weight is 378 lb/ 170kg.

@NYC_Today_Video_Short

7 ай бұрын

@ukranger7 170kg including you or the captain+170kg and how fast you can fly And how mach gas you need for 100km, and where I can buy one and I'm sorry because I asked to many questions, thank you.

@ukranger7

7 ай бұрын

Hi. No worries; I'm happy to try to answer your questions. The total clip-in weight of 170kg has to include the engine, trike, and pilot. Max airspeed: kl/h, mph: 90/56, min: 37/23. The fuel tank can't contain more than 5 galons of fuel to fly under FAA Part 103. Now, the flying distance is probably about 60 miles; I personally fly within a 10-mile radius. Here is the email to the person who will help you with your purchase. His name is Marcin from Monotrike company. Fly@monotrike.pl Now, a lot of those factors will depend on your weight and wind. Hope I have answered your questions, have a nice day. Thanks 😊

@NYC_Today_Video_Short

7 ай бұрын

@@ukranger7 thank you so much

I PRAY THAT ALLAH WILL ME SOME ONE IS VERY IMPORTANT

Go to gates

battens are installed with the wing detensioned

@ukranger7

7 ай бұрын

Hi. Yes, clip and click; quick install.