Why your Moka pot tastes bad

Тәжірибелік нұсқаулар және стиль

JAN 4, 2021 UPDATE: WAIT, I I can't believe you preheated the water! Watch my follow up video where I specifically address this in-depth: • Why your moka pot stil...
Here's a paper claiming on the basis of physics and a 93C temperature extraction that you want to preheat your water to 70C: www.msc.univ-paris-diderot.fr/.... So consider that too.
Also, I know! You hate my piano and it’s too loud. I have already become a lot more careful with my sound levels in the future videos. Thank you for letting me know.
-----------------**-----------------
Feb 10, 2021 update: Here is a list of the papers I've now consulted about this topic. I will be putting videos out describing what each of these papers says:
Varlamov and Balestrino "La fisica di un buon caffe" (2002) (www.comunicaffe.it/wp-content...)
Gianino, Concetto. "Experimental analysis of the Italian coffee pot 'moka'" (2006) (www.researchgate.net/publicat...)
King, Warren "Physics of a stove top espresso machine" (2008) (www.msc.univ-paris-diderot.fr/...)
Navarini et al. (2009) "Experimental investigation of steam pressure coffee extraction in a stove-top coffee maker" (www.sciencedirect.com/science...)
Hargarten et al. "Swelling properties of roasted coffee particles" (2019) (onlinelibrary.wiley.com/doi/a...)
-----------------**-----------------
Moka pots have a bad reputation among Americans, but done correctly, you can get a quality brew without the bitter taste.
Il Barista Italiano's video on how to clean your Moka pot: • The strongest myth of ...
History of the Moka Pot, Alfonso Bialetti, and aluminum as Italy's national metal:
ineedcoffee.com/the-story-of-...
My video on Siphon brew coffee:
• Video
The (TOO LOUD) soundtrack is Nocture Op. 54, No. 2 by Edvard Grief, performed by me.
Dec 15, 2020 update: I have made a sequel video addressing comments: • Why your moka pot stil...

Пікірлер: 1 400

  • @michaelawesomebanks
    @michaelawesomebanks2 жыл бұрын

    #1: dont grind your coffee too fine! #2: dont pack the grounds down! #3: dont go past medium heat! #4: leaving it on the burner too long! #5: not cleaning your moka pot!

  • @chefofzen

    @chefofzen

    2 жыл бұрын

    bonus tip : slightly open the lid while pouring to add some of the crema

  • @patrickallard2520

    @patrickallard2520

    2 жыл бұрын

    I'm not sure an aluminium pot is healthy, better use a inox one.

  • @lisa6371

    @lisa6371

    2 жыл бұрын

    @@patrickallard2520 Inox makes a much better cup off coffee too. I live in Italy and most sold are aluminum. Terrible!!!! I won't even drink out of it. I have my grandparents vintage Vev Vigano and it makes a huge difference. Or I use my inox or Le Creuset french press.

  • @Johro66

    @Johro66

    2 жыл бұрын

    @@patrickallard2520 I have a stainless steel Bialetti, they are available, I much prefer it, I won't use aluminium.

  • @Johro66

    @Johro66

    2 жыл бұрын

    @@lisa6371 Bialetti make a stainless steel moka pot too, I have one.

  • @louisbourbon8973
    @louisbourbon89733 жыл бұрын

    I've never heard of boiling the water BEFORE putting it in the moka pot.

  • @unluckycloverfield4316

    @unluckycloverfield4316

    3 жыл бұрын

    Me either!

  • @Balmung812

    @Balmung812

    3 жыл бұрын

    To boil it faster and to avoid sizzling the coffee grounds, you don't want them to taste bitter.

  • @suppiluiiuma5769

    @suppiluiiuma5769

    3 жыл бұрын

    It just saves time. If you think about it, it makes sense to do so , because starting out with cold water will add nothing to the flavour. You're just making yourself wait longer.

  • @robhulson

    @robhulson

    3 жыл бұрын

    @@suppiluiiuma5769 yeah, but, doesn’t boiling some water first take time? 🧐

  • @garygrinkevich6971

    @garygrinkevich6971

    3 жыл бұрын

    @@robhulson I have an electric kettle it really does save on boil time vs the open flame on the stove in a cold perk, you can use the electric kettle to heat up your mugs as well so the coffee doesn't immediately go cold when you pour it, its really was a game changer to my coffee game.

  • @oldcowbb
    @oldcowbb3 жыл бұрын

    i never tasted my moka pot, the coffee comes out of it tastes good tho

  • @loodog555

    @loodog555

    3 жыл бұрын

    I deem this joke properly brewed.

  • @samuele5931

    @samuele5931

    3 жыл бұрын

    @@loodog555 my moka pot tastes of alluminum 😂

  • @JoseRivera-rl3qv

    @JoseRivera-rl3qv

    2 жыл бұрын

    @@samuele5931 lol

  • @vanessac0382

    @vanessac0382

    2 жыл бұрын

    I never experienced a bad tasting coffee from my moka pot and i dont put hot water before it brews. I just put regular temperature water and let it boil on the stove

  • @JoseRivera-rl3qv

    @JoseRivera-rl3qv

    2 жыл бұрын

    @@vanessac0382 it never boils

  • @quantttum
    @quantttum3 жыл бұрын

    Number one advice from me.....keep the burner at low to medium. All the other tips, you can mess up on. I never pre-boil. Never cool down. Just keep the burner down. And remove after it starts steaming. Don't worry about being perfect. All this obsession with the perfect cup....I've been brewing coffee for decades. Most important tip is to enjoy.

  • @mikeyjsy

    @mikeyjsy

    3 жыл бұрын

    100% agree. I use cold (or room temperature) water and use the lowest gas setting. Takes longer but comes out perfect every time.

  • @loodog555

    @loodog555

    3 жыл бұрын

    More discussion on preheating water:kzread.info/dash/bejne/nJebr8d9dKS6XdY.html

  • @switchstatement568

    @switchstatement568

    3 жыл бұрын

    @@loodog555 I just preheated it to try your theory, no difference. Actually it looks like it's watered down, at first I thought it was just a feeling, but it seems that preheating removes some flavor.

  • @OG_ALviK

    @OG_ALviK

    3 жыл бұрын

    @@switchstatement568 No wonder I've never heard of preheating water for moka. Because indeed it sounds like extra useless step and extra appliances that just fill the kitchen space for no reason. Either way, I'm gonna try this preheating methodology tomorrow morning.

  • @switchstatement568

    @switchstatement568

    3 жыл бұрын

    @@OG_ALviK I agree with you, I am making a coffee not a full meal so there's no need to clutter the kitchen with another pan, but I have to say it does some difference, the result for me is basically a watery coffee with less flavour, please let me know your results after you try, another opinion would be good since it seems that a lot of people would debate over it.

  • @leginspeg6051
    @leginspeg60513 жыл бұрын

    I put cold water in mine and wait until i can’t hear the bubbling and never had a bad coffee

  • @Chris_Tinacan

    @Chris_Tinacan

    3 жыл бұрын

    You do you. You're making coffee to please your taste buds, not anyone elses 😊

  • @joeshapiro8365

    @joeshapiro8365

    3 жыл бұрын

    Mmmm im sorry to inform you every cup of coffee youve had tastes terrible

  • @Chris_Tinacan

    @Chris_Tinacan

    3 жыл бұрын

    @@joeshapiro8365 😂

  • @unluckycloverfield4316

    @unluckycloverfield4316

    3 жыл бұрын

    Thats how i make mine but have i been wrong ?!,

  • @FedoraSpunk

    @FedoraSpunk

    3 жыл бұрын

    Your coffee is probably fine, maybe even best, sometimes if you skin the cat from the other end it's better. But in this vase you're actually more closely following the manufactures instructions instead of getting cocky

  • @SirenEklipso
    @SirenEklipso3 жыл бұрын

    I don't even drink coffee. I'm just fascinated with the alternative coffee pot aesthetic. Edit: I now have a french press and a Moka pot

  • @loodog555

    @loodog555

    3 жыл бұрын

    The art deco design of these things is iconic.

  • @mygetawayart

    @mygetawayart

    2 жыл бұрын

    in Italy whatever you people use is literally alien.

  • @nikolaisedov2295

    @nikolaisedov2295

    2 жыл бұрын

    Yeah i enjoy the process every time and I like watching it erupt like a little volcano lol

  • @gavinc.morrison1147

    @gavinc.morrison1147

    2 жыл бұрын

    @@nikolaisedov2295 facts

  • @JOHNOSA

    @JOHNOSA

    11 ай бұрын

    moka is better in taest or french press?

  • @gabriellperry
    @gabriellperry3 жыл бұрын

    I love that your channel is just about coffee. Such good explanations and curiosities, thanks so much!

  • @AARNOLD9999
    @AARNOLD99993 жыл бұрын

    this and your advice about sour coffee in comments really helped me out. this mornings brew is the best this far, and i honestly cant wait for tomorrows brew... cheers 🌴☕

  • @loodog555

    @loodog555

    3 жыл бұрын

    Awesome! I'm glad all the COVID-era research I put into brewing is making the world a better coffee place!

  • @billist4
    @billist43 жыл бұрын

    I've watched dozens of Bialetti Moka pots and this one is excellent. I appreciate the in-depth look at the history of the Moka pot and its inventor, too. Thank you!

  • @loodog555

    @loodog555

    3 жыл бұрын

    Thanks, Bill!

  • @dinoram1983

    @dinoram1983

    2 жыл бұрын

    Thank you...

  • @Old299dfk
    @Old299dfk3 жыл бұрын

    I just got a moke pot for Christmas... youtube knows this somehow. Although I have no privacy whatsoever, atleast I have good coffee now.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Hope the video helps you on the path to good coffee!

  • @carles3316

    @carles3316

    3 жыл бұрын

    😔✌️

  • @lainedauncey8578

    @lainedauncey8578

    3 жыл бұрын

    I don’t have one and I got recommended

  • @shermanfirefly5410

    @shermanfirefly5410

    2 жыл бұрын

    @@lainedauncey8578 I just thought of it in my mind, and then seconds later-- *Pop*

  • @breadyegg
    @breadyegg3 жыл бұрын

    Mistake#4 was the one I learned most recently. When the coffee is coming out, after a while there will be a "surge" that is more pale and watery. That's the time to take it off the heat. I always used to keep it on until all the water had filtered through.

  • @miguelarturopalomaresruiz

    @miguelarturopalomaresruiz

    Жыл бұрын

    not a mistake, also not a problem, it depends on time coffee starts burning (Giving off sour flavors) 3.5 minutes after it has started brewing (got in contact with hot water), as long as that water doesn't come 3.5 minutes after the brew started there's no problem on waiting for it to finish. but if you left the grinds on the fire for a long time is possible that it has already burnt

  • @Gianfranco_69

    @Gianfranco_69

    Жыл бұрын

    Pale and watery means you didnt fill the Grounds pan up and flatten it.... ignore this videos "dont pack it" advice ,you have to pack it if you like strong espresso... which ,to be fair,is what a Mocha pot is for

  • @breadyegg

    @breadyegg

    Жыл бұрын

    Great tips. Thanks gents

  • @miguelarturopalomaresruiz

    @miguelarturopalomaresruiz

    Жыл бұрын

    ​@@Gianfranco_69 this is wrong and dangereous, mocha pot is not designed to withstand pressure as a espresso machine, that's not what mocha pot is designed for.

  • @Gianfranco_69

    @Gianfranco_69

    Жыл бұрын

    @@miguelarturopalomaresruiz oh....i dont 'tamp it down' like an espresso machine,just fill and flatten it...they are fool proof,they never explode (they have a valve) unless you make a rookie error and put grounds in the bottom and coffee in the top...which i have seen someone do

  • @calahad
    @calahad3 жыл бұрын

    This is all legit information. Once I started preparing my moka pot the way it's described in this video, the difference has been night and day compared with my years of wrong brewing method.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Awesome! Glad to be a help! That’s a pretty good yelp review! For even more tips, there’s my follow up video linked above and there’s this awesome video if you search “moka pot voodoo”, he’s also got some nice tips to try out.

  • @peteraugust5295
    @peteraugust52952 жыл бұрын

    I love how the intro is precisely the story that probably brings 95% of the people to the video.

  • @loodog555
    @loodog5553 жыл бұрын

    Hey you guys, thanks for all your comments! Before you launch the 200th comment at me about whether to preheat the water, check out my latest installment which addresses this specific question: kzread.info/dash/bejne/nJebr8d9dKS6XdY.html. Before you launch the 2000th comment about how much to fill up the coffee basket: kzread.info/dash/bejne/lHeH0JR8iLrAf6g.html Here's a paper claiming on the basis of physics and a 93C temperature extraction that you want to preheat your water to 70C: www.msc.univ-paris-diderot.fr/~phyexp/uploads/Moka/article1.pdf. So consider that too. There are subtle interactions between how much the initial air in the chamber expands and starting temperature of the water. I know, many of you are Italian and unhappy with what I've done to your brewer, like I’m coming along and telling you your culture is wrong! No worries, my friends. I mention this in the update as well. People bring up how much coffee to pack, what beans to use, it's all in that update and I welcome you so we can continue the conversation and CENTRALLY IMPORTANT TASK of making the world a better coffee place. Also, THE MUSIC IS TOO LOUD! Sorry. I'm already making adjustments on my new videos and trying to be more considerate of how obtrusive some people can find it. All in all, don't take my word for it! Try it out on your own. MY best technique doesn't have to be the same as YOUR best technique, but wouldn't it be great if we collaborated and came up with the best principles for how to experiment with our beloved little Moka pots?

  • @slippydouglas

    @slippydouglas

    3 жыл бұрын

    93°C? In my Aeropress, I usually use water around 185°F/85°C going as low as 180°F/82° or as high a 190°F/88°C, depending on the beans. Anything above 190°F/88°C (measured with a digital thermometer just before pouring into the beans) always tastes burnt/bitter to me.

  • @loodog555

    @loodog555

    3 жыл бұрын

    @@slippydouglas The proper context on that number was that it was in an article in Scientific American written by Ernesto Illy who was discussing espresso extraction. Your numbers are curious, as I do my AeroPress at 195F/91C and I'm pretty happy. Maybe I'll try a lower temp. next time and see what it does.

  • @RubyTwilite

    @RubyTwilite

    3 жыл бұрын

    I thought maybe the taste was from the pot being aluminum and was looking to buy a stainless steel one. Also please do a percolator video. Thanks!

  • @asharnygee

    @asharnygee

    2 жыл бұрын

    Man I used that exact brand of stovetop expresso for years.

  • @DJ.LakeSea
    @DJ.LakeSea3 жыл бұрын

    Another good tip is to NEVER tap or bang the funnel when emptying the grounds, as it can distort the shape of the funnel and cause the pot to not seal properly. A lot of people think the sealing gasket is bad or they have a defective pressure valve when they get steam leaks, which may be the case, but it could also be the funnel is distorted.

  • @loodog555

    @loodog555

    3 жыл бұрын

    I have not personally had this problem, but your mileage may vary! Certainly, aluminum in a thin layer is more malleable than most people realize!

  • @DJ.LakeSea

    @DJ.LakeSea

    3 жыл бұрын

    @@loodog555 I've also just recently realized that it is better to have your coffee grounds filled about 1mm BELOW the rim of the funnel. This is because the top strainer protrudes below the gasket and can 'move' the grounds while the top is being screwed on, this can cause the grounds to get caught in the seal or the thread.

  • @susan8282

    @susan8282

    2 жыл бұрын

    How do you empty it?

  • @sO_RoNerY

    @sO_RoNerY

    2 жыл бұрын

    @@susan8282 the funnel where the coffee goes? Turn it upside down, make sure the long funnel thing is not hot. Blow into it and 90% of the coffee grounds will fall out.

  • @creation_nono
    @creation_nono3 жыл бұрын

    Legend has it, that behind this piano concert there is a guy ina distance talking something about the coffe.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Of all the comments annoyed with me for my mixing of sound levels, this is by far my favorite.

  • @creation_nono

    @creation_nono

    3 жыл бұрын

    @@loodog555 :) its a polite way of saying just eliminate the music. Less is more.

  • @loodog555

    @loodog555

    3 жыл бұрын

    @@creation_nono Believe me, I know what the message is from the 40 (less witty) comments before you. Unfortunately, KZread doesn’t let you just upload a new video to replace an old one, so we’re all stuck with it. I have made improvements on my newer videos.

  • @99theanonymous
    @99theanonymous3 жыл бұрын

    Use low heat and put A LOT of coffe without packing it out, thrust me, I’m Italian

  • @loodog555

    @loodog555

    3 жыл бұрын

    Hi Italian, thanks for your contribution. The two suggestions you you give are on the list of parameters are very which I discuss in my follow up video: kzread.info/dash/bejne/nJebr8d9dKS6XdY.html I am also very much aware that I am doing this completely wrong from the Italian point of view, again, discussed in my follow up video.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Also, I will not take you up on your offer to thrust you!

  • @99theanonymous

    @99theanonymous

    3 жыл бұрын

    @@loodog555 I’ll watch the video, maybe I’ll change mi mind! 😂

  • @Onemore59

    @Onemore59

    2 жыл бұрын

    Italian. French. South American. Cuban.

  • @Valspartame_Maelstrom

    @Valspartame_Maelstrom

    2 жыл бұрын

    I will not thrust you.

  • @StillAliveAndKicking_
    @StillAliveAndKicking_3 жыл бұрын

    I used to start with cold water, but a few days ago I read that it should be hot, so I tried freshly boiled water, and the result was much better, smoother and tastier. I also tried grinding less fine, and that also improved the result. And yes, taking it off the stove when frothing helped too. So I agree with your recommendations, wish I’d discovered this years ago. Tomorrow I receive a new burr hand grinder, having always used a blade coffee mill. Apparently the burr grinder will make a big difference, as the grounds will be a more uniform size.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Indeed: kzread.info/dash/bejne/lpuBj8GngLOxl9o.html& burr grinders are necessity! I'm told you get much better quality for your dollar with a manual grinder, but I'm laaazy. You need that morning coffee to have the energy to operate a manual grinder, but you need ground coffee to get that morning coffee soooo,,,

  • @StillAliveAndKicking_

    @StillAliveAndKicking_

    3 жыл бұрын

    @@loodog555 I’ve ordered a manual grinder, but I cannot fault your logic. Looks like I’ll need an ekectric grinder too so I can wake up enough to use the manual one. Oh shoot.

  • @djambu
    @djambu2 жыл бұрын

    Thanks for ur suggestion. I'll try this one out next time. Hopefully it turns out well.

  • @ChastasticGaming
    @ChastasticGaming3 жыл бұрын

    I have been doing most of this except I was heating it on high and not cooling the chamber after. Great tips, made a huge difference cheers pal!

  • @mr.l6615
    @mr.l66153 жыл бұрын

    Great video and well edited down to the pertinent info. Thanks, finally a video that gets right to the point!

  • @gregs9726
    @gregs97263 жыл бұрын

    I came to this video for Moka pot tips and stayed for the music! What a lovely, spirited rendition of this Grieg nocturne - one of the most enjoyable I can remember ever hearing. Bravo from one pianist to another!

  • @loodog555

    @loodog555

    3 жыл бұрын

    Aw thanks, man! All my other commenters seem to hate it!

  • @gregs9726

    @gregs9726

    3 жыл бұрын

    @@loodog555 I guess my opinion won’t be completely representative then, but this subscriber for one would gladly enjoy more music! Or perhaps you’ll share a video of just your playing for us all to enjoy while we sip an improved cup of Moka! ☕️👍

  • @Trevolemina

    @Trevolemina

    2 жыл бұрын

    Add this pianist to the count. In fact I searched the channel for a video of the nocturne and was sorely disappointed.

  • @nishali3343
    @nishali33433 ай бұрын

    i love bitter coffee sometimes, the taste lingers the whole day, sometimes well into the night.

  • @reshbet
    @reshbet24 күн бұрын

    I am a first year teacher, and brewing coffee is quickly becoming an art and hobby for me haha. Shalom!

  • @gurumze8013
    @gurumze8013 Жыл бұрын

    Great video. One more thing I noticed improves the final taste is to give your coffee a stir after you pour it into the cup.

  • @loodog555

    @loodog555

    Жыл бұрын

    Sure, get it nice and even! Thanks for the tip!

  • @taitcarrillo8926
    @taitcarrillo89263 жыл бұрын

    I don’t drink coffee And I’ve never heard of a Moka pot Thank you sleep deprivation

  • @loodog555

    @loodog555

    3 жыл бұрын

    I honestly didn't think this video would be remotely interesting to anyone who wasn't into coffee. How did you get here?

  • @QianBing

    @QianBing

    3 жыл бұрын

    @@loodog555 youtube recommendations are weird as fuck

  • @xscarletfields

    @xscarletfields

    3 жыл бұрын

    An italian died somewhere in the world

  • @lisalisa-ge4ic

    @lisalisa-ge4ic

    3 жыл бұрын

    I enjoy French Press coffee the most it is Rich and sweet

  • @taitcarrillo8926

    @taitcarrillo8926

    3 жыл бұрын

    @@loodog555 honestly my mans, I have no idea, but I like it

  • @Handom1
    @Handom12 жыл бұрын

    i always fill the sieve completely with powder, tap it lightly so that the powder is distributed and smooth it out. this is how you avoid channeling.

  • @henningyoutube9563

    @henningyoutube9563

    2 жыл бұрын

    Fancy seeing you here 😅

  • @loodog555

    @loodog555

    2 жыл бұрын

    I've never gotten channeling, though I've researched about whether you need to completely fill the basket: kzread.info/dash/bejne/lHeH0JR8iLrAf6g.html

  • @Handom1

    @Handom1

    2 жыл бұрын

    @@loodog555 Thank you!

  • @loodog555
    @loodog5553 жыл бұрын

    Also, there is a much longer video that spends a bit more time discussing some of the science theory (like the fact that water boils at higher temp when it's under pressure) and contests my claim that you need to remove the Pot as soon as it's bubbly. Their claim is that ambient temperature water will... I don't know... they're not exactly clear... spend more time in contact with the grounds. I don't see how the steam is going to spend any time in contact with the grounds before boiling creates the vapor pressure.... Anyway, watch if you'd like a bit more food for thought kzread.info/dash/bejne/k52fp8tyqKvaYqQ.html.

  • @MultiBamb00cha

    @MultiBamb00cha

    3 жыл бұрын

    Turns out that Moka pots are a bit trickier to pinpoint then I thought 😅. Moka pot and none of its parts aren't in my eyes a sealed system. While true that partial pressures between each of the three chambers at any time will probably vary, it is not sealed and the pressure is fairly free to equalise, as the only resistance is the coffee bed itself. Therefore based on the drawing, you can see the system works not exactly due to Pascal's principle as it is more complicated than that. The first part is largely based on vapor pressure difference. Water evaporates at pretty much all temperatures, temperature only changes the rate at which it does so. So does the surface area of the faze interface. The drawing shows, that the tube of the basket is a much smaller area, compared to the rest. Temperature being close to same in the chamber, it is expected that there will be less vapor in the tube than around it, less vapor = lower pressure, causing water to be sucked through the tube until equilibrium, which we keep shifting by heating it. This effect doesn't necessarily happen only at boiling temperature, it can happen sooner (haven't tested nor calculated the lowest temperature though.) Than the coffee chamber starts to fill and extract the coffee. It can be tricky here to pinpoint the ideal heat to use, as extraction is a function of both time and temperature. Temperature increases both the extraction and the evaporation rate in the bottom chamber, increasing the speed at which the water is forced up into the coffee, eventually out of the coffee into the final chamber, and therefore decreasing the time of extraction per molecule of water. I expect there to be a steep extraction curve though. The water that enters first is at a relatively low temperature and stays a long time, as it needs to fill the chamber before being forced out. It also at this stage doesn't get heated further. The water coming after it gets progressively hotter and hotter, as it is necessary for it to be so, so that the pressure equilibrium is not reached. After the water fully fills the coffee chamber, it has nowhere to go but up. The hotter the water going into the coffee, the shorter the contact time, purely based on small pressure gradients between the three chambers. (Higher heat, more water sucked faster, works even between the coffee chamber and the top of the pot). Now, the reason you can produce wastly differently tasting cups is that extractions are a mess 😁. You would expect that there is no difference between short, hot extraction and a long cold one. If you ever had a cold brew, you know that isn't true. Some chemicals are not extractable (think of soluble but for liquids) at lower temperatures. In the case of coffee, these compounds are the harsher bitter ones (tanins mostly) and the acidic ones. That corresponds to their testing, where the coffee spends a fairly long time extracting at 60 degrees and progressively shorter times at the higher temperatures. This is aided by them using high heat to heat the cold water, causing a longer 'lag faze' and a quick 'log faze' of extraction. If you use already (close to) boiling water, you will force the water to fill the coffee chamber a lot quicker as the pressure difference between the two chamber will rise quicker, causing shorter extraction time at a higher temperature, but your extraction has very short 'lag faze' and the same 'log faze' afterwards, extracting overall more of the bitter, and less of the lower temp sweeter rounder compounds. That assumes the use high heat too, though. Your result is better, because you put it over medium heat. That will lengthen the lag faze and make the log faze not as steep, extraction will be likely less bitter and more sweet. In regards to them not plunging it into cold water, it is just the matter of reaching equilibrium to stop the process. You are putting constant medium heat into it, starting at a water close to a boil. You will reach a point where this system becomes incapable of keeping up the heat necessary for the equilibrium to not be reached(as the amount of water in the chamber decreases), and the water will stop flowing. At that point, you will likely superheat this water, which you don't want as that temperature will likely cause unwanted compounds extracting. So you stop and force equilibrium earlier, by rapidly decreasing temperatures( likely reversing pressure gradient, btw, causing some watery coffee to be sucked back into the heating chamber). They on the other start high heat, but as they see the flowing coffee, they immediately decrease to low, causing the equilibrium to be reached more slowly and naturally, without the need of cooling the chamber down.(therefore results may vary in between electric stoves with higher temperature lag, over gas stoves) Long post, should've wrote an email 😂

  • @loodog555

    @loodog555

    3 жыл бұрын

    @@MultiBamb00cha Yeah, I agree with most of what you said as it is mostly in line with King's paper www.msc.univ-paris-diderot.fr/~phyexp/uploads/Moka/article1.pdf. "Your result is better, because you put it over medium heat. That will lengthen the lag faze " I'm not sure this is the case. Medium heat will mean it takes more time to get sufficient water to boil to have the vapor pressure needed to start the brewing, but I'm figuring the only thing that changes the brewing temperature is the ratio of the temperature of the fully heated air to the starting temperature of the air, since that alone dictates what the partial pressure of the air is going to be, and therefore how much water vapor needs to be produced, and therefore what the water temperature will when brewing. Medium get gets you to that temp more slowly, but it's still the same temp, by my figuring anyway. On a side note: I'm curious about your consistent spelling of the word "faze"

  • @MultiBamb00cha

    @MultiBamb00cha

    3 жыл бұрын

    @@loodog555 Sorry, not a native speaker, I use the word 'faze' in a couple different instances, and it is used in a similar way I'd use it in my native language. Also what I meant by your result being better because of the use of medium heat, what I was comparing is a scenario where already boiling water from the kettle is being used, and I am suggesting that in that case, medium heat should yield better results, as opposed to high heat, if like I said you are using boiling water. You will likely get enough of a pressure differential fast enough even on a medium heat in this case, plus reaching higher pressure, though unlikely due to the systems inability to really get pressurised much, may lead to increase of the boiling temperature of the water, causing it to superheat a bit, and making the extraction go more bitter. The way I address partial pressure was also not the way you are thinking, and I should have cleared that up. I used the wrong term there. I was talking more about a likely pressure gradient in the Moka pot, from highest likely being in the bottom water chamber, second in the ground coffee chamber, and lowest (atmospheric) in the upper chamber. The air, although it can affect the process, is much less important in the chamber than water. Air is not highly heat conductive, nor does it have a high heat capacity, and there is comparatively much smaller amount of molecules of it in there. Understand that water in the chamber doesn't have to be boiling evaporate, aka increase pressure, aka start the process. It is just much faster when it is boiling. There are reasons it is never said to brew Moka at a low heat and temperatures reached. It is impractical due to time required, and it is also practically impossible to monitor the actual temperature inside. It will likely also taste bad, as we are looking for a sweet spot of temperature/time of our extraction, and this might yield poorly extracted coffee.

  • @antc.4457

    @antc.4457

    3 жыл бұрын

    @@MultiBamb00cha You didn't make an important consideration: gases expand as the temperature rises. This is the reason why the water put in the boiler rises towards the extraction chamber and continues until it reaches the bric. Inside the boiler, you must not only consider the presence of liquid water but of a gaseous atmosphere of air saturated with water vapor which, when heated, expands, pushing liquid water (not compressible) upwards, at temperatures around 90~95 ° C, through the funnel of the coffee recipient.

  • @MultiBamb00cha

    @MultiBamb00cha

    3 жыл бұрын

    @@antc.4457 yeah, that's why the whole mechanism works, pressure is increased by evaporation, gases have larger volume than liquids, creating higher pressure. What I was saying that the amount of molecules of air is not as significant overall, as water molecules, later steam molecules vastly outnumber it, until a lot of water is pushed into the coffee and out of the bottom chamber

  • @SvensonGus
    @SvensonGus3 жыл бұрын

    I found give the final coffee a stir before pouring it into my coffee mug gives a more consistent flavour. Otherwise the second mug gets a stronger taste.

  • @songyiworld
    @songyiworld3 жыл бұрын

    I've been doing it all wrong all these months! THANK YOU!!!! can't wait to actually enjoy my coffee.

  • @zorawarsingh9373

    @zorawarsingh9373

    3 жыл бұрын

    is your moka pot coffee tasting better now

  • @loodog555

    @loodog555

    3 жыл бұрын

    Awesome to hear!

  • @songyiworld

    @songyiworld

    3 жыл бұрын

    ​@@zorawarsingh9373 yes, but i honestly feel like everyone just has to experiment and see what works best for their moka, their coffee grounds, their stovetop etc...and don't get too frustrated! i'm finally happy with my brew in the morning starting with room temperature water, grinding beans to a little coarser than fine, heat at medium. simple. i don't run my moka under cold water like in some videos. starting with boiling water kept giving me sour coffee. i stopped stressing, and started to just do what felt right, and yay delicious, rich moka pot brew!

  • @nlt10016

    @nlt10016

    3 жыл бұрын

    Please use cold water, that is the best way to get the best tasting coffee ever. Always use cold water. Good Luck,,

  • @Ali-rz7er
    @Ali-rz7er3 жыл бұрын

    Hello! Thank you for this review! I'm wondering if you or anyone knows: If I get a 300ml pot, I assume that if I fill the chamber with coffee I'm making what's essentially a coffee with 3-shot intensity? (I've only really had cafe espresso - flatwhites and lattes, coz that's all anyone sells around here. No percolator or plungers.) Will the coffee chamber cope with being filled only a half/third? Must the water chamber be filled to the valve, or can I run the whole thing at less-than-full for both grounds and water on a lower burn?

  • @deirdre108

    @deirdre108

    3 ай бұрын

    Although I'm late in seeing this video, I just wanted to say yes, you can half fill (in your case 150ml) the water chamber. You'll get a stronger brew by doing this.

  • @christopherhiggins8238
    @christopherhiggins82383 жыл бұрын

    I look forward to trying your method. Thank you for your advice.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Hey, glad to help! You may also like my follow-up video with more details: kzread.info/dash/bejne/nJebr8d9dKS6XdY.html& Also, wiredgourmet has a great video on some ideas to try that are a bit out of the box with regard to heating times, in their Moka Pot Voodoo video: kzread.info/dash/bejne/p2GEx7uemdS2fLg.html

  • @molomono9481
    @molomono94812 жыл бұрын

    Nah, the dutch way: fine ground, pack it down add some more, keep it on till it starts spitting, never clean the heat sterilises it for you. The bitterness is the good morning turkey-slap in the face im looking for.

  • @ItsNeverTooHot4Leather

    @ItsNeverTooHot4Leather

    2 жыл бұрын

    Damn straight. It's ESPRESSO, so it's going to be bitter! I don't know what all these people are expecting from espresso coffee. If they don't like the bitterness, then they SHOULDN'T DRINK ESPRESSO!

  • @molomono9481

    @molomono9481

    2 жыл бұрын

    @T B Its a joke, i learned ro drink coffee to meet deadlines while studying engineering. I agree propper coffee is better haha

  • @norajohnson2841
    @norajohnson28412 жыл бұрын

    I think this is the very video I’ve been looking for. Thank you! My moka pot coffee every time spitters and taste absolutely awful, it doesn’t do that smooth rising like in this video and others and I am so heartbroken.

  • @loodog555

    @loodog555

    2 жыл бұрын

    Start with medium heat, then immediately reduce to minimum heat once you start seeing coffee. The result is that it will come out slow and smooth and less burnt.

  • @gastondoumerc7863
    @gastondoumerc78633 жыл бұрын

    Americano: Start with a clean pot, add cold/fresh water (I use bottled) to basin, use a good espresso but do not pack, twist on top for a tight seal, 3 minutes on a low-medium flame. Pour finished espresso into a cup, add 6 oz of boiled fresh water, creamer to taste. Always great.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Yeah, I ran some experiments on best water and I agree that bottled water works best: kzread.info/dash/bejne/iGGu08uipK67ico.html I don't know about this "creamer" stuff, but live your best life. Make it how you like it!

  • @guguigugu
    @guguigugu3 жыл бұрын

    the coffee should not gurgle/explode/bubble. it needs to ooze out slowly with just a bit of steam at the very end.

  • @loodog555

    @loodog555

    3 жыл бұрын

    I have drifted more in a direction of turning down the heat to low once coffee starts sputtering. This does result in a more oozy and smoother coffee flow as you suggest. Anything to reduce the brewing temperature is a good thing!

  • @guguigugu

    @guguigugu

    3 жыл бұрын

    @@loodog555 yes thats how i do it. i have a glass electric stove, so i turn it off as soon as coffee starts coming out, and the residual heat of the coil is just enough to finish the brew. overall, everyone has to experiment for themselves until they find the right procedure.

  • @pepperann4781
    @pepperann47813 жыл бұрын

    This was very concise and informative :) thank you

  • @mrgallbladder
    @mrgallbladder2 жыл бұрын

    My 2 biggest problems with them is everyone tells you how much water to use, but no one ever mentions the amount of coffee to use, and second, it just takes way too long to get the coffee volcano going, even when you start with boiling water, like unreasonably long. You can brew 2-3 coffees in the same amount of time with literally any other brewing method.

  • @loodog555

    @loodog555

    2 жыл бұрын

    I've found moka pot is as fast as any brewing method except AeroPress and certain much faster than a French Press, especially using the 8-minute James Hoffman technique: kzread.info/dash/bejne/Y2d7qdSedKvVp7Q.html

  • @wilsonnetoms

    @wilsonnetoms

    11 ай бұрын

    Between 1g of coffe per 16 mL of water (stronger) - 1g of coffee per 24 mL of water (lighter). That's the values you could use as base but there are no rules, give a try and see how it pleases you.

  • @ilovepudding7873

    @ilovepudding7873

    10 ай бұрын

    i measured how much grams of water fit in the base until the valve. divide that by roughly 10-11 and use that much grams of coffee.

  • @adamfirst9321

    @adamfirst9321

    7 ай бұрын

    I brewed my first cup today.. from start of heating to finish, it took 3 minutes in a 2cup Pot. And it was very cheap. My electric kettle takes longer than that just to boil water.. and another 10 minutes to brew tea…. ….such that I’m thinking of getting a separate Moka Pot just for tea.. If you know a faster way to make espresso or tea, other than instant, teabags or microwave.. I’m all ears.

  • @HZ-fg9sf
    @HZ-fg9sf3 жыл бұрын

    Love the light touches of history and science thrown in there. 👍

  • @MarkMcMillen2112

    @MarkMcMillen2112

    3 жыл бұрын

    "snickers" Science?

  • @fjrevoredo
    @fjrevoredo6 ай бұрын

    this makes it easy and simple. Most channels usually give you a 40 minute video on how to use a moka pot with a lot of unrelated garbage.

  • @loodog555

    @loodog555

    6 ай бұрын

    Hi, thanks! It's a balance between keeping it simple and including all the details. You can pour through these 1374 comments to see just how many people want to raise the detail to the next level. I basically wound up making another 10 videos for people who want to nitpick things like 1. Preheating the water: kzread.info/dash/bejne/gWVopKuBXZyxhKQ.html 2. Filling the coffee basket up all the way: kzread.info/dash/bejne/lHeH0JR8iLrAf6g.html 3. Using an AeroPress filter: kzread.info/dash/bejne/mK1lu62qorO_c9o.html 4. The leftover water: m.kzread.info/dash/bejne/eGWjyNStmNDYhps.html&pp=ygUJI3dvY2R1YmFp All that said, this short simple video is by far my most popular.

  • @williammyers3213
    @williammyers32133 жыл бұрын

    W.O.W. I had no idea you could get those results from a Moka pot! you have forever changed my morning routine...

  • @loodog555

    @loodog555

    3 жыл бұрын

    Man, that is awesome to hear!

  • @lucasb409
    @lucasb4093 жыл бұрын

    Seen a few people talking about using the mocka pot. You however, have the most informative, yet, concise, video out here. Thanks for making this, saving me from watching a dozen videos and my morning coffee ritual.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Thanks for commenting! It’s good to know this has been helpful.

  • @whiqeddik7615
    @whiqeddik76153 жыл бұрын

    Excellent character notes that percolated on this one, nice vid bro

  • @6507bankston
    @6507bankston3 жыл бұрын

    Over the course of years. I've pretty much come to your conclusions. I use a grind that's put out by LaVazza, and it's better than the coarser "all-purpose" grinds I used to use. It's an "espresso" grind, but not the "dust" you need for a Pavoni Europiccola.

  • @MrDDiRusso
    @MrDDiRusso3 жыл бұрын

    I do everything wrong and I like my results. I use cold distilled water, electric plate on high, I use fine ground espresso roast coffee, and I pack the coffee in and slightly mound over the puck. This makes an extremely strong cup of coffee and I don't find it too bitter. I don't use sugar, only cold heavy whipped cream. I live at over 1 mile high so the water never reaches 212°F so it doesn't over heat the coffee. Anyway, that's how I do it.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Yeah, the more I research into Moka pot, there larger the number of expert opinions I find saying different things. I posted a link above to a video that completely contradicts much of my advice. At the end of the day, these are just ideas to play with and should come down to what *your* experimentation yields with your taste preferences. Don't take my word as gospel, for sure!

  • @hxhdfjifzirstc894

    @hxhdfjifzirstc894

    3 жыл бұрын

    If it tastes good, it's not wrong. )

  • @ahmadironmaiden
    @ahmadironmaiden3 жыл бұрын

    I'm getting wayy too sour coffee? Am I grinding too fine? Too coarse?

  • @loodog555

    @loodog555

    3 жыл бұрын

    Sour coffee = underbrewed. You'll want combination of finer grind size and/or longer brew time. Leave the pot on the stove a bit longer and grind your beans more finely and you'll be good to go!

  • @keve8586
    @keve85862 жыл бұрын

    amazing video, thank you! should you take the Moka pot off the stove AS SOON as you seen the bubbling begin or after its about half full? there should be enough vapor pressure once its start bubbling to push all the water through correct? thank you again

  • @loodog555

    @loodog555

    2 жыл бұрын

    Hey thanks for the praise! Great question! What matters is the *color* of the coffee produced; don’t get hung up on what quantity of coffee made. Once you’re getting pale bubbly stuff, you’ve run out of accessible water and are now brewing with superheated steam (very bad for flavor!). I explain the physics of this here: kzread.info/dash/bejne/ZJ6AxqmiZ87Qqs4.html

  • @keve8586

    @keve8586

    2 жыл бұрын

    @@loodog555 thank you and cheers

  • @aidenwhitt3523
    @aidenwhitt35233 жыл бұрын

    I’ve loved Moka coffee for a while now. I didn’t know about cooking it too hot or taking it off the burner and running cold water. Thank you very much.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Cool! Glad to be a help! For even more moka pot ideas, there’s my follow-up video in the description and if you search “moka pot voodoo”, there’s another guy who has some very worthwhile tricks to try out in his vid too!

  • @AngryPeopleStudios
    @AngryPeopleStudios3 жыл бұрын

    You've changed my life and my coffee. Thank you!

  • @loodog555

    @loodog555

    3 жыл бұрын

    That's what I want to hear! Awesome that this had value to you! More to consider here: kzread.info/dash/bejne/nJebr8d9dKS6XdY.html

  • @royroblox
    @royroblox3 жыл бұрын

    Judging by how the pot nearly slipped when the top is being screwed on, I would not want to do that when the bottom is filled with boiling water (even with an oven mitt)! Boiling the water first is using two tools and two steps when you could do it in one anyway. I still enjoyed the video along with the researched intro, and going to try the quick rinsing cool-off trick you showed : ) Thanks for sharing!

  • @loodog555

    @loodog555

    3 жыл бұрын

    Thanks for your comment. I do mention safety as a concern in my follow-up video: kzread.info/dash/bejne/nJebr8d9dKS6XdY.html

  • @GuillaumeB7

    @GuillaumeB7

    Жыл бұрын

    Technically, you can also boil the water directly in the reservoir, before placing the grounded coffee and attaching the top.

  • @EJGentleman
    @EJGentleman3 жыл бұрын

    Great video on how to make a great pot of coffee. I have never in all the time I have a Moka pot, ever had to cool it down to "remove the bitter". Remove from the heat just as it starts to go pale, let it cool naturally. Never got a bitter coffee ever.

  • @fromtheflightdeck252
    @fromtheflightdeck2524 ай бұрын

    Washing with soap is what they mean you dont need to do. Even Bialetti on their box says environmentally friendly as you just need to rinse off the oils under a hot tap and then dry off with a tea towel. That takes care of all the cleaning meeded. Best stored in pieces completely dry.

  • @loodog555

    @loodog555

    4 ай бұрын

    Hi thanks for the comment! Bialetti themselves specifies occasional washing with lemon juice, vinegar, and baking soda: www.bialetti.com/it_en/inspiration/post/how-to-clean-the-coffee-pot-at-home-natural-and-effective-remedies

  • @BruceBoschek
    @BruceBoschek3 жыл бұрын

    I like the fact that you use the stirrer from an Aeropress to smooth out the coffee! LOL Nice touch. All good advice. Thanks. I have at least 40 mokka pots, but only drink espresso. Cheers.

  • @loodog555

    @loodog555

    3 жыл бұрын

    The more diligent will notice the little touches!

  • @johnkeepin7527
    @johnkeepin75273 жыл бұрын

    One of the good things about them is that the spare parts are still available, in particular the rubber rings. I recently resurrected an old one that needed a new ring, which hadn’t been cleaned properly over the years.

  • @MORAMAX

    @MORAMAX

    2 жыл бұрын

    Often my mother forgets the Bialetti Moka on the fire. A disaster happens ; -)) ... the handle melts. So I take apart all the pieces, rub it with the 3M scotch brite sponge and water abrasive paper 1000-1500 etc. then I go to buy all the spare parts. The most complex to change is the handle, you have to hammer the fixing pin with a nail, it is inserted by pressure. To clean the limescale, vinegar must be put in the boiler and left for a few hours. Greeting from Italy

  • @danielmarquez467
    @danielmarquez4673 жыл бұрын

    Thank you loodog. I've been doing this wrong for years. Keep up the good work.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Happy coffee brewing!

  • @swraios
    @swraios3 жыл бұрын

    What if I instantly pour the coffee to my cup instead of cooling it down first under water?

  • @loodog555

    @loodog555

    3 жыл бұрын

    My concern is that the coffee will continue to brew while you're doing that, unless you can pour it out in less than 2 seconds (doesn't sound safe to me!)

  • @emenemes5678
    @emenemes56783 жыл бұрын

    I dont understand why u need to cool the chamber. Just pour it out immediately. That should stop the cooking.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Hey, good question! Simply removing it will not stop the brewing. Once it starts going, even removing the heat won't stop it. As for pouring it right away, I guess you could try, but my concerns would be that you're not going to pour it out fast enough and also, you might not want all of it in your cup at once, if it's a larger capacity device. But hey, don't take my word for it. Give it a try and let me know how the results work out!

  • @emenemes5678

    @emenemes5678

    3 жыл бұрын

    Sorry its not directly directed to you but a general remark cos i see other people do this too. To me its just inefficient. For smaller moka, pour to your cup. For bigger moka, pour into serving pot.

  • @nickspitzley8539
    @nickspitzley85393 жыл бұрын

    I love mine. As soon as it gets noisy in the Brewing process I take it off the heat. Also I've had great results using cafe bustelo which is espresso ground coffee. So for every rule there is an exception to this.

  • @hxhdfjifzirstc894

    @hxhdfjifzirstc894

    3 жыл бұрын

    I think there are probably many 'combinations' of rules, or recipes that lead to a good cup of moka pot coffee. I have found that it's basically impossible to get a good cup of coffee from bad beans, though.

  • @zeusapollo8688

    @zeusapollo8688

    3 жыл бұрын

    Bustelo si

  • @arjuna207
    @arjuna2072 жыл бұрын

    There was a guy that tested various variables in regards to brewing a moka pot, with sensors and everything. In his tests using preboiled water didn’t give good results, i always used room temperature to start but i will try this method also.

  • @loodog555

    @loodog555

    2 жыл бұрын

    Hi, thanks for commenting! It sounds like you're talking about the paper I explain here by Navarini et al (2009): kzread.info/dash/bejne/ZJ6AxqmiZ87Qqs4.html&pp=sAQA though they never vary the starting temperature. The only paper I've seen that experiments with starting temperature and gives recommendations is the 2009 paper by Warren King, which I explain here: kzread.info/dash/bejne/gWVopKuBXZyxhKQ.html&pp=sAQA If you really have found a different paper that varies starting temperature, I'd love a link so I can make a video on that paper too! Personally, I find the starting temperature of the water doesn't matter at all: kzread.info/dash/bejne/nJebr8d9dKS6XdY.html&pp=sAQA so I found the whole debate kind of silly. An AeroPress filter, for example, is a much more important tweak to make: kzread.info/dash/bejne/mK1lu62qorO_c9o.html&pp=sAQA

  • @dirkusmaximus9268
    @dirkusmaximus92683 жыл бұрын

    Anyone abut the oxidation of the bottom pot ? Although Bialetti started to make it all free materialers sensitive for oxidation. After very good drying, I add rice to soak up humidity !

  • @secretwpn
    @secretwpn3 жыл бұрын

    Now the question that was confusing me regarding similar tutorials - if I pour coffee out of the pot immediately after taking the pot off the stove - is there still any point in cooling the pot under cold water right before pouring?

  • @TovaHolmberger

    @TovaHolmberger

    3 жыл бұрын

    If you want to clean it out as soon as possible which is ideal, then yes.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Hi, this has been asked before below and the answer is "yes". The coffee will continue to brew from the stream pressure after heat is removed, even as you're pouring, since you're not going to get all the coffee out in the next 2 seconds. This may even cause the coffee to brew *more*, since the steam isn't pushing against gravity anymore. Applying cold water stops the brewing process. My prediction would be that your coffee would still be overbrewed, but don't take my word for it! Try it out and see what happens!

  • @dj1NM3

    @dj1NM3

    3 жыл бұрын

    I don't see how it would be physically possible for the coffee to overbrew if that isn't cooled: mostly because the already brewed coffee is in a sepparate chamber (the top reservoir that you pour it into your cup from) to the coffee grounds (still trapped in the basket by the mesh screen inside the moka pot). The only reason I can see for cooling the base is to make clean-up easier by filling the empty top reservoir with water and using vacuum pressure to suck water back through the basket and forcing the grounds to pack back into to it, so that the grounds all come out as a puck when you tap the basket out into a bin.

  • @loodog555

    @loodog555

    3 жыл бұрын

    @@dj1NM3 thanks for this comment. Great question! The coffee does become separate once it has brewed through. You are right about that. The issue is not that any little drops of coffee overbrew, but that the grinds themselves continue to be extracted past the desired point. Imagine one little grain of coffee. If 20% of it has already dissolved from the water, then hitting it with any more water will result in getting the undesirable bitter pieces. I’m not quite sure I follow you about applying cold water for easier cleaning. By the time you are starting to clean your moka pot, I am sure the base is far too cold to get a significant vacuum effect. Cooling the base for me is about stopping the over brewing.

  • @loodog555

    @loodog555

    2 жыл бұрын

    @T B Hi T B. Thanks for your comment, but there a few things to clarify: 1) The idea that a moka pot doesn't brew until the water is boiling is a very common one, but it surprisingly turns out to not be true! kzread.info/dash/bejne/gWVopKuBXZyxhKQ.html. 2) The idea that coffee overbrews because it's being heated belies a misconception about how coffee extraction works. I think the terminology of "overbrewing" is misleading you here. Unlike baking or cooking, the process of chemical change is not brought about by heating. Brewing doesn't happen because the water is cooking the grinds or because the coffee is being heated; extraction happens as the water comes into contact with coffee grinds and the grinds partially dissolve into the passing water. So, while many people believe a moka pot can't overextract because each drop of water only passes through once, the truth is that you can easily overextract a given granule of coffee because you've run too much water past it, dissolving the coffee past the magical 22% mark and then you start getting past those sweet sugars and into the bitter stalky fibers of the plant. This is why any pourover recipe has a recommended ratio (usually around 16.67:1) so that you don't try to keep extracting out of beans that are already spent. The reason you stop the brewing when you hit air bubbles is that the beans are not only optimally extracted by then, but instead of sending water through the grinds, you're now sending water mixed with superheated 120C steam, which dissolves A LOT more of the beans than you want for good flavor. Navarini et al. demonstrate this in their 2009 paper, which I explain here: kzread.info/dash/bejne/ZJ6AxqmiZ87Qqs4.html

  • @Chris_Tinacan
    @Chris_Tinacan3 жыл бұрын

    I saw the advice about a coarser grind before in another video but the coffee just tasted weak when I tried it 🤷

  • @loodog555

    @loodog555

    3 жыл бұрын

    Definitely don’t go too coarse either. I made a video about grinders that could be a helpful instruction on this: kzread.info/dash/bejne/lpuBj8GngLOxl9o.html

  • @felcas
    @felcas3 жыл бұрын

    Soo if you take out as soon as it starts to bubble or become pale, you end up not filling the entire upper part and will have water in the lower part. I thought I have to use all the water and fill the upper part to the top before ending. Will try your method, guess it better to add hot water later if it is too strong but at least don't get bitter coffee.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Hey, thanks for the comment! You’re completely correct, in that some water is left behind in the lower chamber. Some brewers will say this messes up your brew ratio (it does), but I’ve found those last 50ml or so of brewing to be the biggest culprit in bitter taste, since you’re running water through grinds that have already been extracted by the earlier water. On ratios, for my model of Moka pot, filling up both the water and the coffee gives a 15:1 ratio, which I imagine is common across different sized pots. You’re right in that my method makes that ratio a bit higher, since some water is left behind. The coffee winds up being a bit stronger, but a lot less bitter, so I’ve found the taste to be greatly improved over just leaving the pot there until the water is gone. But, with all Moka advice, your mileage may vary! Try both ways and see what works better for you.

  • @fiberglass101
    @fiberglass1012 жыл бұрын

    You've done very well.

  • @neilquinn
    @neilquinn3 жыл бұрын

    What's the purpose of boiling in advance? I always just start with cold water and let it sit on low-medium heat within the moka pot.

  • @joemamaisfat

    @joemamaisfat

    3 жыл бұрын

    Heating the coffee grounds makes it taste burnt/stale/bad . If you start with cold water, you burn your grounds even before the water can go through it, resulting in bitter, burnt aftertaste. Starting with hot water is better because you don't have to heat the water up to temperature so your grounds arent sitting in a hot furnace without any liquid.

  • @RobinDude

    @RobinDude

    3 жыл бұрын

    From what i've heard, starting with cold water can cause the coffee to burn and come out bitter as it's over the open flame longer. Starting with hot water means less time over the flame.

  • @loodog555

    @loodog555

    3 жыл бұрын

    See above.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Honestly, I haven't found preheating the water makes much a difference compared to more important tweaks like using an AeroPress filter, coarser grind, or removing from the heat at the right time, but probably you should preheat because the physics models show you'll extract at too low a temperature otherwise: kzread.info/dash/bejne/gWVopKuBXZyxhKQ.html

  • @garygrinkevich6971
    @garygrinkevich69713 жыл бұрын

    Thank you for sharing, I can't stand what passes the average American acceptable standards of "coffee" i.e anything pre ground, instant, burned, old, or worst of all a combination of all; paying 3$ for 4 hour old perpetual sludge from a 30 year old bunn coffee pot found in every chain establishment because the waitress/cashier/clerk isn't paid anywhere near enough to maintain the equipment let alone brew fresh coffee on the reg so they just top it off with water occasionally so its always a burnt, cigarette, watery combination, - you know who you are. Stay coffee snobby indeed.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Ha, you are literally the first person out of like 200 comments to appreciate my little tagline! Thanks, amigo. I hear ya for sure!

  • @unluckycloverfield4316

    @unluckycloverfield4316

    3 жыл бұрын

    This read like a manifesto and I'm a convert

  • @evilxeye

    @evilxeye

    3 жыл бұрын

    The first time I tried coffee in Paris my mind was blown-“It can taste good?!”

  • @gregorykarimian3813
    @gregorykarimian38132 жыл бұрын

    Great video. What setting on the de’longhi do you have your grinder set to for Moka pot? Thanks! What coffee grinder should I buy to make moka pot with?

  • @loodog555

    @loodog555

    2 жыл бұрын

    Hi Gregory! Thanks! My grinder has settings from 1 up to 18 (larger numbers being more coarse). I find I get results that I like by setting the grinder to "7", which is basically just pas, the range the machine has labeled as "espresso", so coarser than espresso. Your extraction time is pretty short so the grind needs to be pretty fine. The problem is most people go too far with this and get overbitter coffee. Good luck!

  • @gregorykarimian3813

    @gregorykarimian3813

    2 жыл бұрын

    @@loodog555 thanks for the reply. I appreciate it!

  • @bruceaitken1918
    @bruceaitken19183 жыл бұрын

    Aargh - frantic loud piano overkill

  • @fatmajacob4327
    @fatmajacob43273 жыл бұрын

    Oh finally one talk abotu yemen and coffee history.. 🌸 ❤

  • @NikoBellaKhouf
    @NikoBellaKhouf3 жыл бұрын

    Great video, straight to the point. But, it would have been better without the loud, distracting music.

  • @brewman467

    @brewman467

    3 жыл бұрын

    Yes, just wanted to write exactly the same. Music too loud and distracting.

  • @emailusgenericus4890
    @emailusgenericus48903 жыл бұрын

    Do you have a vid on how to clean the bialetti? I follow your procedures on brewing but if there are any hints and hacks for cleaning the pot, other than washing the top carafe and rinsing the bottom, that would be great to know

  • @loodog555

    @loodog555

    3 жыл бұрын

    Hey, great question! I included a link at the relevant portion of the video, but here it is for your easy access: kzread.info/dash/bejne/q4aLlbhwgZPVgbw.html Removing the gasket to clean out the cone of the upper chamber is the big surprise for everyone.

  • @sophiawright007
    @sophiawright0073 жыл бұрын

    are you saying I've been doing all these mistakes every single morning for 3 years?

  • @loodog555

    @loodog555

    3 жыл бұрын

    Yes, you've been doing it ALL WRONG and you must STOP IMMEDIATELY. NO ONE is allowed to have their own method that works for them! J/k. Ask 10 coffee experts about how to do Moka pot and you'll get 12 opinions. This is just what's worked best for me. Your mileage may vary and I hope anyone who watches my videos tries out the differences on their own to see how it comes out. I've been told that cold water is the "right" way to do it, or that leaving the Pot on the burner, but my results are same (and much more time-consuming) with cold water and a lot worse tasting if left on the burner past the clear bubbles, so this is the technique that satisfies me the most.

  • @lalopianalto
    @lalopianalto3 жыл бұрын

    Really cool... thanks Taxi Driver's DeNiro...

  • @loodog555

    @loodog555

    3 жыл бұрын

    Are you talkin' to me?

  • @rogerangel4257
    @rogerangel42573 жыл бұрын

    Thank you! I come from a Hispanic family and they are religious with Moka pots. I’ve told them that boiling the water is crucial and that good coffee should come from good beans, fresh grinned, not too fine unlike bustelo. 🥴. People would be happier if they can properly brew from a moka pot. Cheers!

  • @CosmicSeeker69

    @CosmicSeeker69

    2 жыл бұрын

    coffee is a beverage. tea is an infusion. Never boil a beverage - always boil an infusion. (and never use aluminium!) PS - I did 21 years in catering

  • @johngrandy51
    @johngrandy513 жыл бұрын

    I will try this tomorrow, thanks.

  • @Fredd165
    @Fredd1653 жыл бұрын

    I’ll try with more course grind

  • @williamjosephblazkowicz2030
    @williamjosephblazkowicz20303 жыл бұрын

    Tip n 3 : used grinded coffe is good for degrease nasty pots and pans 😉

  • @EstrelSidus

    @EstrelSidus

    3 жыл бұрын

    Very true!

  • @g3rzin
    @g3rzin3 жыл бұрын

    Italian here. You made two mistakes. 1) You don't have to put hot, boiling water in it, but cold tap water and put the pot on the smallest flame possible. 2) You have to put way more coffee in it (without pressing it with the spoon), it has to look like an hill/mountain and it will be compressed a bit when you tighten the pot.

  • @g3rzin

    @g3rzin

    3 жыл бұрын

    It is also fundamental to stir the coffee with a teaspoon after you remove the pot from above the flame since at the beginning the coffee that rise is denser and more bitter while at the end it's more watery.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Hello there, my Italian friend. Thanks for bringing up these issues, as it lets me clarify a few more misconceptions: 1) You absolutely can use cold water and I've experimented around with both, but it does not affect the taste of the coffee, simply because the vapor does not start to dampen the beans until boiling anyway. However, since using an electric kettle is both more energy efficient (insideenergy.org/2016/02/23/boiling-water-ieq/) and faster, I just jump straight to it. 2) I would specifically advise *against* stuffing the filter in the manner you suggest. I've have experimented around with it a bit and I have found (a) it prevents an airtight seal with the gasket and (b) causes loose grounds to become embedded in that gasket. The result is that you do get a stronger cup of coffee, but you sacrifice brewing pressure. I've even found it makes less coffee! 3) Regarding your post below about stirring with a teaspoon, I agree.

  • @g3rzin

    @g3rzin

    3 жыл бұрын

    loodog555 I forgot to mention that to preserve the airtight seal and the pressure you simply have to tighten the pot so strongly that veins in your head start to pop :) Tip: if you all found out the coffee is getting stuck, like only 40% or less has risen up, just put the base of the pot under cold water ( you’ll feel some vibrations) being careful not to spill the coffee inside, and put it again on the flame. After few seconds the all of the coffee will magically rise.

  • @loodog555

    @loodog555

    3 жыл бұрын

    @@g3rzin Hey Gerardo, happy to follow up! Of course, our expression here in America is "Your mileage may vary". Moka Pot is all about getting the best coffee that works for you and it seems everyone has a different favorite cup. However, for the sake of the collective coffee knowledge of humanity, I'd like to debug this a little bit and figure out why your results and mine have turned out so differently using the same technique. I definitely tighten the top to the point of the tolerance of the aluminum threads, which is pretty tight. The issue is that all the pressure in the world won't create a proper seal with the rubber gasket if there are obstructions to that seal in the form of the grounds (which is what happens when I have tried your "mountain" technique). A nice seal will happen without all that much pressure so long as the rim of the filter can mate smoothly to the gasket. So this leads me to my theorizing about what you're doing differently. My pot takes about 300ml of water and the filter holds about 20-25 g of coffee, depending on how coarse the grinds are. This is intentional design, as it creates a water:coffee ratio of about 15:1. My theory is that your overfilling is only an extra gram or so and the result is that you can still get a seal out of it. Can you be a bit more specific about how much "mountain" you're adding?

  • @g3rzin

    @g3rzin

    3 жыл бұрын

    @@loodog555 I think it's more than a gram :) Here's all the process: imgur.com/a/HLyVA42

  • @tyronos
    @tyronos2 жыл бұрын

    Covers all the bases. A must watch for anyone who brews Moka pot coffee

  • @loodog555

    @loodog555

    2 жыл бұрын

    Hey, thanks for the review! Glad to be helpful!

  • @613tony316
    @613tony3163 жыл бұрын

    Thank you for these great tips. 👍

  • @Potatinized
    @Potatinized3 жыл бұрын

    You're like Ross from FRIENDS Start educating whenever a topic comes up.

  • @fsavoura
    @fsavoura3 жыл бұрын

    Thanks for the great video. just to recap: 1) no need to grind the coffee too fine / leave it on coarse 2) no need to press the coffee / so water can penetrate easily 3) temperature better on medium and not too high 4) don't let coffee to overbrew, remove it before the last bubbly part starts to come out 5) clean the pot right after The truth is I was using cold water, so great tip on the warm / hot water in advance. I still find it challenging to clean the tank after I left it few times with the water in. I used dishsoap, I used vinegar and even the metal-wire to rub it. Ay tips would appreciated.

  • @szkokee

    @szkokee

    3 жыл бұрын

    Im having a small Bialetti (2cups) so im cleaning it after every brew and having fresh brew every time. I used to have a bigger one(5-6 cups) and no matter what it left coffee stains because the coffee was sitting in there for two days. Now if u have a bigger moka just buy some contanier cup and pour out the fresh coffee there and A, immidiately wash the moka or B, rinse and fill the moka up with water until clean water is in there then worry about washing it properly later. The bottom and the filter part isnt really matter. Also once in a while replace the rubber ring in it. Take a picture of a fresh one the you can compare it to it how burned it gets after time.

  • @miricostanti

    @miricostanti

    3 жыл бұрын

    Don't clean it with soap! Only use hot water to clean the moka pot. Be careful about the water tank, there is a protective layer that goes away if you clean it with soap. Put the flame to the minimum possible, and as soon as you hear bubbling remove it! Before serving use a little spoon to mix the coffee inside the moka pot, it is more dense at the bottom and more "watery" (?) at the top. Putting the hot moka under cold water can damage it, only do this if your coffee does not go up (usually this means that the filter is clogged) Sorry for my english, i'm italian

  • @mr.priman

    @mr.priman

    3 жыл бұрын

    to clean it, you can try to use citric acid, it is sood in small packages for backing or for peackels (at least in my country). You need to put couple of packages into bigger pot, boil it an put moka pot inside. This is the same method as winegar, but without bad smell, so you can put any amount there

  • @antc.4457

    @antc.4457

    3 жыл бұрын

    @@mr.priman The Bialetti Moka is made of aluminum, and aluminum does not pair well with acids ... This is only if you want to ruin the coffee maker or want to find unwanted aluminum salts in your coffee. Instead, it might be possible with the stainless steel coffee pot.

  • @mr.priman

    @mr.priman

    3 жыл бұрын

    @@antc.4457 yes, good point, i didn’t think about that :)

  • @vladimirmihajlovic1003
    @vladimirmihajlovic10033 жыл бұрын

    do you know why you should use boiling water to start with? i always use cold water and set the stove to low-mid and it brews (very) slowly and it's really nice every time

  • @loodog555

    @loodog555

    3 жыл бұрын

    I preheat the water to conserve energy and to save myself time. On the merits on whether you *should* for better coffee, I'll refer you to my follow-up video, where I discuss this at length: kzread.info/dash/bejne/nJebr8d9dKS6XdY.html

  • @vladimirmihajlovic1003

    @vladimirmihajlovic1003

    3 жыл бұрын

    @@loodog555 thanks, watching it now. i will try pre-heating the water tomorrow, makes sense that heating the water also heats the coffee and adds extra bitterness. i really enjoy bitter taste though, so that's why i didn't even notice anything wrong with the method i used (cold water)

  • @hxhdfjifzirstc894

    @hxhdfjifzirstc894

    3 жыл бұрын

    If your method tastes good, don't change it.

  • @SangThangPuia
    @SangThangPuia3 жыл бұрын

    Thanks for the tip, really helpful

  • @toddcamnitz6164
    @toddcamnitz61643 жыл бұрын

    Why your moka pot tastes bad: ...why are you tasting the moka pot? Just drink the coffee.

  • @loodog555

    @loodog555

    3 жыл бұрын

    So that’s what I’ve been doing wrong! 😂

  • @troubauk
    @troubauk3 жыл бұрын

    Cold water, highest heat and it works fine for me

  • @hxhdfjifzirstc894

    @hxhdfjifzirstc894

    3 жыл бұрын

    It it tastes good, it is good!

  • @troubauk

    @troubauk

    3 жыл бұрын

    @@hxhdfjifzirstc894 it's the least bitter I get, when heat is at its highest

  • @ja8303
    @ja83032 жыл бұрын

    What’s a good coffee bean for a moka pot? Do you have a preferred brand?

  • @loodog555

    @loodog555

    2 жыл бұрын

    In general, good fresh beans are good fresh beans. The brewing method doesn’t have much effect on which beans are optimal. If you find that your moka pot is causing your coffee to come out bitter and overbrewed, don’t use anything dark roast/espresso/Italian/French roast. Anything roasted dark is designed to be extracted easily at low temp. You moka pot might pull too much out of them. I personally like a medium roast.

  • @jamesheywood9255
    @jamesheywood92553 жыл бұрын

    Great informative video! Thanks 🙏🏼

  • @DeannaTroyTravels
    @DeannaTroyTravels4 жыл бұрын

    Did not know the word mocha came from there! Cool!

  • @p.art4705
    @p.art47053 жыл бұрын

    I really need to buy a gasket for my mocha pot which I've been avoiding for years. I guess this is a sign that its time lol. PS: We have the same coffee mug! :D

  • @BrianRouse
    @BrianRouse2 жыл бұрын

    So if you apply cold water to the bottom, how is it stopping the brewing process if you're already done making the coffee?

  • @loodog555

    @loodog555

    2 жыл бұрын

    great question! The issue is that your moka pot will continue to brew if you don’t apply cold water from the residual pressure in the base. The only problem is, any brewing you do after you get the pale bubbly coffee, will be nasty and bitter. I explain a bit about a paper that models this in one of my later videos here: m.kzread.info/dash/bejne/ZJ6AxqmiZ87Qqs4.html The short answer is that it relieves the excess vapor pressure.

  • @SamiAbuauad
    @SamiAbuauad3 жыл бұрын

    Fantastic information! Tank you sir!

  • @ro63rto
    @ro63rto3 жыл бұрын

    I and all my Italian ancestors have NEVER filled a Moka pot with boiled water nor have they ever removed it from the hob half way to run it under cold water. We have never had horrible tasting coffee. The only thing that is worth doing here is cleaning your Moka pot properly including under the filter plate.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Haha, someone told me that I would be pissing off a lot of Italians! If you watch my follow up video, I do mention that my advice is contrary to “authentic Italian” method: kzread.info/dash/bejne/nJebr8d9dKS6XdY.html

  • @tinto717

    @tinto717

    3 жыл бұрын

    Great to learn some italian tradition from you. however, I don't see why things have to be italian tradition to be worth doing?

  • @sammyamm5276
    @sammyamm52763 жыл бұрын

    Great informative video but the background music, or should I say foreground music, made it difficult for me to listen to background content. Music gave me heart palpitations, maybe its my ADD 🤔

  • @zatoichiable
    @zatoichiable2 жыл бұрын

    cleaning it with boild water without soap will be good?

  • @loodog555

    @loodog555

    2 жыл бұрын

    Manufacturer recommends using only mild detergent.

  • @Dave_the_Dave
    @Dave_the_Dave6 ай бұрын

    I've found the best taste comes with running the burner at the lowest possible setting that will push the water through. And as soon as you start to get loose foam or sputtering, the brew is done. Quickly remove from heat and quench the bottom reservoir in cool water.

  • @loodog555

    @loodog555

    5 ай бұрын

    I agree with this. Minimum heat is the same technique recommended by James Hoffman, and Moka pot voodoo: m.kzread.info/dash/bejne/p2GEx7uemdS2fLg.html

  • @leonardobulgarelli9256
    @leonardobulgarelli92563 жыл бұрын

    I am Italian, I am a chemist, i brew my coffee with moka three times a day since i was a teenage. And I guarantee, this video is wrong in so many ways I can't even explain

  • @loodog555

    @loodog555

    3 жыл бұрын

    Thanks for your input! My intent was not so much to piss off half of Italy, but rather to give people some basic guidelines if they want to know what they can play around with! Please check my follow up video for more discussion if you would like to get into the details: m.kzread.info/dash/bejne/nJebr8d9dKS6XdY.html If you are a chemist, you might be interested in the physics paper by Warren King where they model the process numerically and show, among other things, that coffee initially extracts before any water is even boiling.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Also, maybe as an Italian chemist you can comment on why Italians don’t care about the bitterness that comes with 2,4-decadienal, 4-ethylguiacol, and 2,4-nonadienal. I guess they’re just used to it?

  • @mattmactire3961
    @mattmactire39613 жыл бұрын

    Sharing a few tips here: I've never seen anyone boiling the water before putting it into the moka... the rest of the video is quite right, but you didn't put enough coffee, you should fill it up evenly and add a little bit more at the top. After that you have to close it tight and boil the coffee at low flame, if you do this you don't have to put the moka in cold water because the coffee will rise slower. At this point it's very common to stir the coffee inside the moka for a little bit. In certain parts of Italy, like Naples, they add some sugar during this step. Anyway, mokas need to be cleaned, you should never leave it dirty (mostly for hygiene, bleah) but you NEVER, EVER wash the interior with dish soap. Don't, just don't. Another tip is that "LA MOKA SI DEVE FARE", this means that the more you make coffee with a moka, the better it will taste, so it always tastes bad the first few times you make coffee with a brand new moka. Don't give up, it gets better! Source: italian addicted to moka coffee, fatto come si deve però, che sennò fa schifo, viene slavato e fa proprio cagare Ciao!

  • @loodog555

    @loodog555

    3 жыл бұрын

    Hi Matt, thanks for your contribution. I personally don’t like to ever add milk or sugar, but of course people can do what they wills. Thank you for your contribution of cultural context! If you wanted to know why I preheat the water, there’s a much more thorough discussion in my follow-up video, which was mentioned in the description and stickied to the top, but I’ll post it again here anyway: m.kzread.info/dash/bejne/nJebr8d9dKS6XdY.html

  • @mattmactire3961

    @mattmactire3961

    3 жыл бұрын

    @@loodog555 thanks man, I also watched the other video now :) I would like to clarify that my comment is about the traditional italian way to make coffee, and I don't think boiling the water before is wrong, it's just... different! Anyway it's always nice seeing passion for an important part of my country's culture such as the true italian coffee

  • @loodog555

    @loodog555

    3 жыл бұрын

    @@mattmactire3961 What I’m learning from comments is that Italians just seem to not care about reducing the bitterness associated with 2,4-decadienal, 4-ethylguiacol, and 2,4-nonadienal. Which is fine, you can brew it however you prefer it, of course. It just means you’re not so oriented towards Third Wave coffee ideas with regard to the under extraction/over extraction model.

  • @loodog555

    @loodog555

    3 жыл бұрын

    Why to use preheated water: kzread.info/dash/bejne/gWVopKuBXZyxhKQ.html

  • @setha9818
    @setha98183 жыл бұрын

    I never knew when to take it off the burner. Half way through, if the lid is still on, it flies out the thing all over the kitchen! Probably need to turn the heat down too.

  • @Jay-pj5tg

    @Jay-pj5tg

    3 жыл бұрын

    This could be that your putting too much water in!! Theres a lil nob on the inside that you should let the water flow over

  • @lachlanrosso8220
    @lachlanrosso82203 жыл бұрын

    You have to press the coffee down a bit more than that lol I usually use hot water from the tap or if i have enough time I'll boil water then cool it.

Келесі