Follow me on Instagram! @TheHeroRR

@dhowser2008

5 жыл бұрын

Since the manufacture are the gods of their engines, knowing from testing when its best change things or adjust them, they are right! But in your case I would wait until you get to your high miles and adjust them. So you plan to own the bike until 100k Miles then at 50K adjust them, then sell the bike at 100K miles. :)

@ErichRankin

3 жыл бұрын

What's the song name at end

As a Brit I nearly spat out my Cup 'O' Tea when you said that you didn't even know that Triumph made cars! :) Cool video as always dude! ;)

@PC-uh6hk

Жыл бұрын

I was thinking the same thing. One of my first cars was a Spitfire 4 mk2.

@marcpeters4599

10 ай бұрын

Dude's probably a zoomer - no clue about "old" foreign cars😉

To adjust or not to adjust. That's the conundrum. The big difference in the VTEC valve adjustment is that in order to inspect the VTEC valves, you must FIRST remove the camshafts and fit the VTEC lifter stoppers, then put the camshafts back on. Then you check valve lash. It's not hard to do but definitely time consuming. However, you can check the non-VTEC valves without removing the camshafts first. Also, the valve clearances for the VTEC valves are twice as wide as on the non-VTEC valves. So VTEC valves will normally stay within specs because of that wider range. Finally, if you do have to adjust the valves, EACH shim is $34! Because the lifter IS the shim. Should one adjust the valves on a VTEC VFR? If one is asking that question, then the answer is yes. Because you never know until you check if the valves are out of spec. I think if you want to occupy the middle ground, then check the non-VTEC valves (that's easy to do). If they are within spec then you can have some confidence that the VTEC valves will also be in spec (since they have a much wider clearance range).

@URBANENGINEER

6 жыл бұрын

I am thinking of picking one up, and tbh I think I would only do the non-VTEC valves too!

@enlightenedidiot9552

6 жыл бұрын

OCLandspeeder thats a great comment with REAL insight. Thanks :)

@enlightenedidiot9552

6 жыл бұрын

i'm_crusty_ Two i like that approach :)

@yootoob78

3 жыл бұрын

This comment has more info than the dude rambling in the video about whatever.

@richfjr1300

Жыл бұрын

interesting, yes, so inspect just the non VTEC valves, i'd say that would be sufficient. I have a fifth gen so no Vtec, have to inspect the valves soon just wondering how big of a job that can be, hoping not too bad

"A Triumph... I didn't know they made cars." When I got into bikes I was like, "Triumph makes motorcycles?"

I found you because I am looking at a VFR800 as a replacement bike for a Nuda I wrote off. Great Video. I grew up in mass and its nice to see the footage of home as I live overseas now. Subscribed!

I have a 2008 VFR with 90k miles. Didnt even check my valves till 55k miles when they started to make a little noise. Ordered the pucks to engage the vtec valves and did the job myself. Almost all vtec valves were out of spec on the tight side and had to order new shimmed buckets. But still runs great at 90k and I truly think 6th gen VFR is one of the best bikes ever made for all around sport touring. Super comfy to get you the twistys where it will hang with most sport bikes. Oh yeah and thank you to whoever made this video but staying in low RPM outside of VTEC? Man this bike seriously comes alive over 6400RPM. I live there.

This video is grrrrreat quality. Now as for the valves you dont have to get them done but when u do hit around 20k miles and u get the valves adjusted u will feel a difference in power, cold startups and just the overall idle of the engine. Great vid brro!!!

Cool video. Triumph made cars in my home town of Coventry in the UK until 1984.

I adjusted the valves on my VFR 400 a few days ago. The engine had allegedly been rebuilt before. FIFTEEN of the sixteen valves were tight. Didn't make any abnormal sounds. Haven't started it since, but it should start easier. Thankfully it has screw type adjusters. EDIT: Pro tip: It helps to measure the clearance at the right spot. The spot I used wasn't the correct one and the clearances measured different. When it started it rattled like nothing else, took another plunge back into the valve covers to do it properly to fix it. I have done several shim under bucket valve adjustments, all were a pain in the ass, but all of them I would do again. The gear driven cam vfr 800 isn't too horrible, but adding a chain into that mix would just make it suck. The vfr 800 had 2 or 3 valves out of spec at 40000 miles, probably had never been adjusted before.

MG made the Midget. Triumph cars were a different company to Triumph motorcycles and that looked like a TR6...cool car for sure 👍

Just picked one up and loving it

@eric62backstrom

Жыл бұрын

Still have it?

@forceddiversity3737

Жыл бұрын

@@eric62backstrom na sold it years ago

72K on my gen 5 before getting hit, but never had one issue, and it was a commuter M-F and a 600 killer on Saturdays only!!!

That Triumph spitfire was made yrs ago at a factory , 5 miles away from were I live , different company to Triumph motorcycle s , standard Triumph the company was called cheers Shane uk

I'm a mechanic been riding since I was six I've got a 2005 vfr 800 I agree with what this bloke says 100 percent all that will happen is the bike will miss if they are too tight or rattle if to lose if you don't have these symptoms the bike is fine getting valves adjusted is a waist of money unless you are racing your bike vfr has shims in buckets nothing can stuff up

Just be aware that you dont know the history. you may just cruising but the previous owners may have flogged it every day man :) Love yo shit. keep doing what your doing man!

Love your reasoning. I'm a 94 vifffer 750 pilot. Love my gear driven cams. Just subbed. B safe😝

@HeroRR

6 жыл бұрын

Thank you, you too!

It seems to me that it is more cheap, and fun too, for you to learn how to do it. It doesn't seem too much complicated from the videos I've seen, if you are a DIY inclined kind of person. P.S. New subscriber by the way! Keep the videos coming! Cheers!

The VFR800 is one of my dream bikes. I have I CBR600rr which is cool but for the long rides I can get painful.

I have modded the hell out of my VFR so it works like Honda SHOULD HAVE made it (suspension, fueling, and more) and I intend to keep it. I maintain it on Honda’s recommended schedule because I am that kind of guy. I am also a Ducati owner. Ducati’s run great if maintained, but if poorly maintained they are a nightmare! IMO every motorcycle should be maintained according to the manufacturer’s specification. That said, I know a guy who never checked his VTEC VFR’s valves in the first 100,000 MILES. That’s strikes me as crazy.

@eric62backstrom

Жыл бұрын

Mine's st 63k miles and hasn't been done.

@udovandenheuvel9920

Жыл бұрын

@@eric62backstrom Would you abolish the fire department in your town just because there hasn't been a fire in 6 months? In other words, your statement may be true, but one should beware of generalizations.

@eric62backstrom

Жыл бұрын

@@udovandenheuvel9920 one should also be aware of assuming to know things that they don't. I've only owned my bike for a few months. So generally if it was mine from new it would have been done at periodic maintenance interval as per manufacturer's recommendation. How's that for a generalization?

@udovandenheuvel9920

Жыл бұрын

@@eric62backstrom Who should know by reading your (above shown) comment? When somebody states "mine has 63.000 and never got a valve maintenance" it seems like you wanted to say.. "and so you don't need either".

The first valve check is at 30k miles, the rest is at every 15k miles on a 6th gen.... And it does make a difference. First valve adjustment was just done on my bike by a VFR specialist and there were parts worn enough to be replaced. It COMPLETELY eliminated the VTEC jolt of the bike, reduced the typical jerky VFR throttle response at low rpms and increased fuel efficiency...

@ismaelzapater5316

4 жыл бұрын

I concur, the valve adjustment almost eliminated the VTEC jolt and the bike is so much smoother now.

@forceddiversity3737

4 жыл бұрын

The flapper mod and elimination of the pair valve will sort the low rpm issues,nothing to do with the valves 😃

@fordy112420

Жыл бұрын

​@@forceddiversity3737 what's the flapper? My vtech has just started making a ticking sound and a mechanic says it's the air filter.

Picking up an 05 tomorrow morning. Its like when I was 5yrs old night before xmas. He let me test ride it and it hides its weight crazy well. The 6800 Vtec that some complain about well for me it's just adds character - loads of it !!

@eric62backstrom

Жыл бұрын

Do you still have it?

@vn3801

Жыл бұрын

@@eric62backstrom sold

@eric62backstrom

Жыл бұрын

@@vn3801 might I ask why? Not trying to get into your financial situation, did you find it undesirable to own?

@vn3801

Жыл бұрын

@@eric62backstrom I had a budget to buy something newer so got an S1000R. The VFR is a great bike, if I didnt have the extra budget would have easily kept it. They are a bit heavy but the semi sports bike rider position opens them up to decent back road ability. I nearly put in fork cartridges AUD1000 and custom rear shock AUD1400 brands like Penske etc… which would truely transform its handling to a new level, but got the BMW instead. The VFR is full of character with the V4 engine so a well looked after example is an excellent choice of bike.

@eric62backstrom

Жыл бұрын

@@vn3801 can't blame you there! I'd kick a puppy for one of them!

Hi Hero! Saw one today 2007 interceptor with 9k miles for $5000. Paint is flawless at honda dealer. Should i pull the trigger and buy it? It will be my first bike

Can you please tell me what your camera and mic setup is. Especially the mic!!! Very good man!!

Or you could spend the 750 bucks and make it to 150000 miles. Imo it's the one service not to skip on, but to each there own. Your point on mechanics is valid Trust none of em.. I've only owned inline 4s and you can tell by sound and feel when the valves are getting tight. Once they set in they rarely need adjusting.

I adjusted the valves and synched the carburetors on my old VFR-750 at around 28k miles. It went from being a peppy bike to pulling surprise wheelies in second gear.You don't HAVE to adjust the valves, but if you want the best performance, mileage, and engine longevity, you should do it. On the 750, it's a PITA mostly because you have to pull the entire exhaust. Still worth it. Find a reputable, independent shop instead of calling dealerships.

I have a 2002 with around 110k (km) on her. I've checked the valves twice: around 48k and 96k. During the first check only one valve needed adjustment and it was the smallest adjustment shim so basically that didn't matter at all. During the 2nd check no valve needed adjustment. So yes, basically I'd say you can easily check them around 100k for the first time.

@mickeymouse4897

11 ай бұрын

Bull

My honda vfr 800 have 188 000 km I don't know in miles ,You do the count. But the engine was never opened! It's still running normaly.

@fornicateu2

5 жыл бұрын

114,000 miles.

@goingwildagain

4 жыл бұрын

V Tec on non v tec

Gotta Love the VIFFER!

I’ve got VFR 800 V-Tec for about 5 year. It was 38000 miles when I’ve checked valves and there was nothing to adjust. In UK you can get a second hand engine with 25000 miles on the clock for the half price of the valve clearance. I’ve been told by Honda technician that there is nothin to look for at 32k miles and don’t even think about it at 16k because it’s a total waste of money.

Hey there, i have been suscribed a while now and i also own a VFR 800. 2003, it has 59000 km (i live in Italy), i have done the mods ecc and at low rpm it has gotten a lot better. How many miles do you recomend oil and oil filter changing? Because recently i am hearing a tocking in the motor when its warm, and i am scared that it could be the CAM chain! IFF you have any advice it would be apreciated ..great vids thanx

@HeroRR

6 жыл бұрын

That's definitely the cam chain tensioner. It's a normal issue in our bikes around the mileage you have. There are a lot of guides on how to do it and it's not too expensive. So no worries ;)

My 06 varadero 125 is at 200k, this is a 125 thats been ragged to shit and when I checked the valve clearance before selling it they were perfect, my uncle has it now and it still runs :) Always been tempted to get another one

Gr8 bike. I got my '97 Cbr1100xx four years ago, another gr8 bike. It was more $, they're kind of rare here in U.S., I paid $5k, perfect condition, low 9k miles, already hopped up with full exhaust and jets. I commute it's stone-cold reliable and shocking fast. It's valve-check time and I'm not worried about it, ill get to it eventually!

@HeroRR

6 жыл бұрын

Cool bike! I always liked the black birds!

It is already a pain to adjust valve clearance on current sportbikes, then this...?

0:24 This makes me so glad to be living in England. Filtering is perfectly legal here and it makes travelling by motorbike brisk and enjoyable. Why on earth would your authorities make you wait behind cars when you can simply filter past? Do you actively encourage congestion?

Just check the valves and you know the clearance, here in europe they check it at 40000 kms, i have had a fzr1000 and after 38000 km the intake valves had almost no clearance so i've had to buy a few shims, it is a lot of work.

My 91 has nearly 50k. Got serviced at 12k at dealership, was told valves within spec. Never checked again :) My 05 has under 13k...so maybe i wait until 24k+ at minimum, and thanks for the vfrness video :)

Hi there, It's already 2020 and are you still owner of your VFR800 silver one? If yes, no valves adjustment so far? :)

You could check to see if there inspec. All motorcycles require removal of the cams to adjust the valves since the shims are under the bucket

@HeroRR

6 жыл бұрын

Not true, I've never had to remove cams to check valves before.

@matmuffin1

6 жыл бұрын

HEROrr wait you have to take the cam out to check the clearnce?

@HeroRR

6 жыл бұрын

Nevermind you're right, you don't have to remove them to check but you do to adjust.

@bigpapa8152

6 жыл бұрын

Alan Same with my Concours, plus reusable rubber cover gasket. Super easy job and quick.

@BigBadLoneWolf

5 жыл бұрын

@@HeroRR you have to remove the cams,remove the outer vtec valve spring, insert the slider stop pins, then re-install the cams to check the vtec valve clearances, which means the cams have to come out twice , just to check the vtec valves

Like your videos very much, own a VFR800 2006 as well. I agree on all your positive comments. There is one item though I dislike. In spring or summertime when the sun is shining and outside temperatures move up, the engine produces a lot of hot air, particularly from the opening in the frame on both sides hitting your inside upper legs. This is annoying, particularly in slower traffic. When speeding up the wind will cool you down a bit but this is definitely a minus point from the side radiator concept. I also have an old Honda CB750f from 1980 (4 in line aircooled) giving no problems whatsoever. Anyone having any ideas to cure this? greetings from Holland!

@eric62backstrom

Жыл бұрын

Wear pants.

Hi. Is it a good bike when I'm 193 cm tall? I had no motorcycle for 15 years :(

From a technical point of view, it always makes sense to keep the valve clearance on an internal combustion engine within the target range. If it cost 100€ on the VFR 800, no one here would question it. The fact that it is much more complex and therefore more expensive is insignificant from a technical point of view. For the engine to breathe well, the intake valves must open to a certain extent and the exhaust valves must be able to blow out the hot gases. Imagine if I were to continuously hit a piece of very hard metal with a hammer; on average 1500 times a minute and that for years. Inevitably, material is removed; and that's what happens here. At some point, the shim is too narrow and must be replaced by a wider one to restore the nominal dimension. HeroRR's thesis is purely monetary; technically, it must read: Maintain your motorcycles properly, then you will enjoy them longer.

I love the song

My 88 vfr400, which lives in the higher rev range compared to the 800, has never had the valves done. It's done 100,000km now.

@fyaworx

3 жыл бұрын

Yup, had one of those 100k kms no 8issues

I agree on two things: 1. The valve clearance check and adjustment on this bike is very complex and expensive. 2. Yes you are an idiot (that allows you into my club). Seriousness aside, had my 2002 15 years, 34k miles with no issues other than known electrical, fixed myself by running extra ground wires and lately getting a almost hollow metal knock from engine. Removed both cct's and added tension to the springs, no change in sound so hoping its the clutch. Did flap and pair mod as in your video, but not the snorkel since the flap removal seems enough, and has made a slight improvement in low end throttle response. Also just installed Delkevic exhaust, can't believe I waiting 15 years before doing this, the sound is incredible. Have great drone video of bikes on "Tail of the Dragon by Drone" by vVertigo on KZread, keep up the good work.

@HeroRR

6 жыл бұрын

Awesome video! I enjoyed it! Thanks for sharing :)

I like this guy. I like him more with every video.

@HeroRR

6 жыл бұрын

Hey, I like you too!

@Dave.S.TT600

6 жыл бұрын

I'm falling in love with this Guy too (but in a manly way)

@phdtobe

6 жыл бұрын

Gonzy1122 He reps New England very well.

It is a good debate this one. I've owned a VFR. It cost me £550 at a Honda dealer to check valves, which didn't need adjusting at 16000 miles. I bought the bike at 9000 miles for £2500. For £550 I could have got a new shock, or exhaust, etc. Absolutely not worth doing the valves. Maybe at every 32k, or 48k miles. But the cost is not worth it. Annnd @George Wallace, not everyone owns loads of tools and a garage to store a bike in pieces in. Some people use these bikes are their only way to commute to work.

One of the best engines ever.. I don´t worry about valves either. VFRs run for life with just the normal maintenance ;)

@alex-thangnguyen2746

6 жыл бұрын

Once you ride a V4, there is no going back; if inline 4s are more powerful. If you are like me and use 87 cheap gas, then you run the risk of fouling up your valves. But if the bike starts up and idles properly, then don't mess with the engine. Don't quote me on it, but 60,000 miles without a valve check is no problem. I would recommend an upper head rebuild to change your oil seals and maybe put fresh valves in if you use cheap gas. Btw, even the 500cc V4s were pure enjoyment; nearly perfect on reliability even if I changed the oil every 11,000 miles when I was a teen. Worry about the valve clearance when you rebuild the engine or when you get the upper head rebuilt; which will turn the VFR into a brand new bike again.

i had vfr 750 1995 model in 37 years I've riding out of 24 bikes it is best i have ever owned

Looked like a Triumph TR6. Triumph made cars back in the day. TR7, TR8, Stag, TR6, Dolomite

@PartialS

4 жыл бұрын

I'd say TR6 too :) My dad had a Dolomite Sprint back in the day. One of the first production cars with a 16 valve head. Lovely thing. Pity it wasn't made very well and terminally blew head gaskets...

I think it's a Stag... en.wikipedia.org/wiki/Triumph_Stag . You are essentially correct, if you ride thrashing the engine you will need that 16K valve check. I remember dropping my FZ750 in for its regular 20K valve check, the mechanic said it was fine, no adjustment needed, I rode that fast, but never thrashed it. My old pushrods engines i.e. CX500, Guzzi v500 defo needed adjustment at the allotted time regardless of riding style.

@DJ10ROCS

6 жыл бұрын

CPU UK Looked like a Stag to me too! Beautiful cars! Especially in British Racing Green!

I had one of these and I have to say I got bored of the VTEC thing pretty fast. I swapped it for a mint 99 FireBlade. 60kg lighter, 20bhp more powerful and no VTEC. Horses for courses though

Hey I got a full Delkevic system for my Er6-f, aka ninja 650 in us. Can't wait to get it on but they missed two parts out the box so can't put it on yet😂😂😂😫😫😫😫😫

Got a 2002, Thought about doing it and I had the same exact thoughts as you. Bought the bike for 3k with 6.5k miles. Now have 12k in a year and thought why would I spend that money when I can just put it towards my new(er) bike fund. Some people aren't logical or economical...

Looking at a 2006 VFR with 25K miles but the valve clearance has not been checked. Should this be a concern? Asking price is $3400. Add has a photo of the bike in Alaska.

I ride a 1998 VFR800 and it's got almost 100k (99,200 ish) and I don't think the valves were ever adjusted. The bike runs great and the VFR is known for taking a massive amount of miles

@exmon007

5 жыл бұрын

The 98 VFR does not have a VTEC engine so you do not need the valve adjustment service. The 98 VFR has the stator and harness issue.

The thing about large displacement VFR800 bikes is you are cruising around town at 4000rpm. Meanwhile smaller displacement 300 bikes are shifting like a spas at 7000rpm just to keep up with traffic. For those bikes that just tach up and down, you really do need valve adjustments.

Dude the valves need to be checked coz "IT DOES NOT GO WRONG AT THE END" as you stated, rather they gradually go wrong and by the time something is noticeable with such factory tuned engines it is too late and a you are looking at more costs.

Damn in South Africa lane filtering is encouraged and completely legal!!!

The factory recommends a valve check every 12k on my Triumph. I don't ride very hard. The dealer told me it was ok to ride the machine past the recommended 12k if it isn't ticking. I keep the oil clean and all the fluids flushed like brake fluid. I had a Kawasaki 1000. Same deal, it ran forever no problems.So I agree , If your not ringing it's neck everyday then your fine. If you start to hear a valve tick, usually after a cold start then you should check the valve clearances. The dealer makes a lot of money on people bringing their bikes in for maintenance and I'll bet they don't even do the work half the time. If it ain't broke don't fix it.

could you take new vfr 800f deluxe edition one day ı wonder it but so many old videos on the youtube

HEROrr, I see you have the Helibars on the VFR. Can you review them? Is the difference significant compared to the stock bars?

@HeroRR

6 жыл бұрын

A review and install video will be coming out for them. To keep it short they make a big difference. I really enjoy them.

@Szlejer

6 жыл бұрын

Thanks, I'm looking forward to it... The other option for me is the 20mm spacer under the stock bars (superbike bars are out of question).

@wayno19643

3 жыл бұрын

Get them

Valves occasionally need checking. Some people do 100k without a check but that doesn’t mean that their bike is running well. I think 16,000 is too low, I’d generally wait until around 40,000 miles before checking. I bought a vfr (pre-vtec) with 42k on the clock. Checked the clearances and quite a few were out of spec. Oh, and just because you don’t thrash your bike, doesn’t mean it’s any less likely to need shins adjusting. If anything, it’s the other way round. www.shiny-side-up.net/2016/01/31/how2-vfr-valve-clearance-check-and-adjustment/

Where are you in Massachusetts? Thank you for the videos

@HeroRR

6 жыл бұрын

South Shore.

Triumph was founded in 1885 and started making cars in 1923. They stopped making cars in 1981. Car looks to be a TR6... Love my 2008 VFR and I probably won't be taking it in to do the valve checks any time soon. I have 15700 miles on it. I just did the snorkel removal, the pair disable, and the flapper disable, but one of them is causing issues because the bike ran fine before I did them. Even after letting it warm up while I'm putting on my helmet and gear, the bike is stalling now when I rev it and cut the throttle quickly. Only does it for the first minute or so of riding and not all the time. I bought the bike used and it already has a power commander on it. Can't really tell a difference so I might just put everything except the snorkel back to stock. Thinking one of the mods isn't playing well with the PC...

@HeroRR

6 жыл бұрын

I think you're right it is a TR6! Also if your bike is stalling then you may want to adjust your idle, just raise it slightly higher. Owners manual says 1,200 once the bike is warmed up. If it isn't there then bring it up to spec. If it already is at 1,200 then try bumping it to 1,300 and seeing if that makes a difference. Also if you have a PC then you may want to consider doing O2 sensor eliminators!

@Blue-moon12

6 жыл бұрын

nitzerebbhead Yes I just commented above. Looks like a TR6

I would check the valves on 50.000km it is a time consuming but the valves are not the problem. First Honda VTEC vfr 800 has an issue with the tensioners. So you should check that. If you want to keep the bike for a long time or If you see any cracks or something suspicious my advice is to change them. Once you do that, you have no worries.

Yea u re right..just ride it til it die..if it run good,just go!dont mess with the valves...

here for the two bros exhaust video, where is it?

In California where it's legal, they call it lane splitting or splitting lanes, plus you can find numerous VFR's owners with 20K to 30K miles on them and the valves have never been touched, try that with a Ducati.

Did you have to change or alter the cam chain tensioners

I did 95k on my 2002 vtec and the valves weren't checked, in the end I reckoned the camchains were shot so I changed the engine for a 1200 miler that only cost £350

"its a triumph, i didn't know they made cars" lolololololol

Years ago I had a Honda 750F super sport which ran perfectly until it needed a valve job. Afterwards, I would meticulously measure the valve clearance, and order replacement valve shims until I had a paper grocery bag full of them just in case I could use one of them again. I seriously doubt there are any Honda dealers who will do a valve inspection or adjustment today for less than $1,500.00. I also suspect that if there's any VFR that can do 150k miles without a valve adjustment it is going to be one with a gear driven cam. Then again, if the bike is only using half of the valves most of the time, perhaps only half of the valves will need to be replaced. Even at $1,500.00, I'd probably have them inspected and/or adjusted after 50k miles, THEN I'd see if I could get another 100k I've been wanting to get a 98-01 VFR800 for a while, but after watching this video I might opt for something newer.

Thats a TR6, hella cool.

How hard was the gear position indicator to install

Dya always use your clutch when shifting up??

I have a 99 VFR without VTEC and the valves are starting to make some noise. Around 64,000 miles so my bike almost got there before a noise haha.

Do the newer models of the VFR also have a VTEC? I could look it up, but im lazy.

@Soulbreeze

6 жыл бұрын

They do. The VFR1200's don't have it, but the all the Intercepter/VFR800's from 2002 onwards do.

I don't know a lot about bike engines. Let's say I rode this bike for about 80.000 miles. Then had the valves checked, how many miles would that buy me? Another 80k? 50k? Or doesn't it actually improve it like that.

I’d go crazy if I wouldn’t be able to lane split

I have 46,000 miles on mine and the only thing its needed is the timing chain from riding it hard

The bottom line, if you want to keep your bike for a long time, do the adjustment. If you want a cheap means of transportation, do minimal maintenance and get rid of it as soon as it starts giving trouble. I did spend the $1,500 on the valve adjustment and the improvement was dramatic. Very smooth idle, smooth acceleration, and the Godforsaken VTEC jolt almost disappeared as Szlejer indicates in the comment below. The bike further improved after adding a Rapid Bike EVO module. As the system learned from the O2 sensors, the idle became even smoother and acceleration is diabolical. The VTEC jolt is now completely gone. My two cents...2007 VFR800.

Dragon Nea i know that fella cool guy

Chances are the valves won't ever be a problem. But if you know how to turn some wrenches and know how to use a set of feeler gauges it's absolutely can be done by yourself. If you follow the right procedure from the service manual and are confident in your abilities it's really not that complicated. Nobody should attempt if you don't have the money to have some clean up your mess if you accidentally screw things up. The only reason to do them in the first place is to have peace of mind, chances are they're fine to begin with. Of course you can't tell until pull the valve cover and start checking your clearances. It's a Honda so it's most likely fine. 🏍️

Didn't know Triumph made cars!!! I will give you 750 bucks for it when the valves go out of adjustment.

@GTARockman

6 жыл бұрын

haha. Almost none of the bikes really need valve adjustment.

@bigpapa8152

6 жыл бұрын

Robert Fraley Almost all, so some do then?

@antoineastruc239

5 жыл бұрын

Almost non of us used their helmet, di you think we shouln't wear one? (ok, bad exemple, sometime I wish I wouln't…).

My bike is 2004 and i checked the valves during winter, at 26700 miles and 5 valves were out of spec, i did the job myself but parts cost me around £350, and yes the job is pain in the butt, not sure i would ever do that again aldo on a £2500 bike is it worth spending that much money where you can buy a se ond hamd engine for around £500. I dont know, but whilst doing that job i have painted the valve covers removed the throttle body and clean inside v and replace any worn parts. I know my bike is good for a many more thousands of miles.

Man I love my VFR800 but it's been laid up in my garage for a month almost while I try and fix the linked brakes. Damned things, I wouldn't recommend a Honda with linked brakes anymore.

@ohidontknow1061

4 жыл бұрын

Hope you got it fixed, if you did let us know what the problem was. I have one as well and I have to admit I quite like them, wouldn't have said that until I owned one.

Too bad you don't have Tappet adjusters like my NT650, takes me 45 minutes to check and adjust, and the Hawk is a 100,000 mile engine. I just crossed 75,000 and still have high compression.

Can’t believe you did not know triumph made a car (spit fire)

Where In MA r u ? Let's meet up for a ride !!!! I lane filter ALLLL THE TIME LMAO 🤣

Your aftermarket gear indicator changes when YOU change gear. Mine has a cup of coffee,listens for change in RPMs,takes a nap and THEN changes. Maybe.... And when i grab the clutch it goes into extremly stupid-mode by just flickering an 8. N.B It was already fitted when i bought the bike

@HeroRR

4 жыл бұрын

Is it healtech?

@EVILSPAWN1003

4 жыл бұрын

@@HeroRR I have no idea. The indicator thingy LOOKS like yours,only green lights. But it`s a minor niggle at this point. It`s a 2001 gen.5 that i bought in June and i`ve had such a great summer on that bike it`s my baby now and i`ll forgive it it`s minor quirks lol. Can`t wait to take it apart come winter and see how the previous owner hooked it up tho because surely this can`t be right...

@EVILSPAWN1003

4 жыл бұрын

@@HeroRR Yep i checked,it`s a Healtech. I`m assuming "GIpro X-Type G2" as that`s the one that comes up for 98-01 VFR`s

Rok temu robiłem zawory w tym motocyklu. Procedura jest dosyć złożona i skomplikowana w porównaniu do innych motocykli. Jednak da się to zrobić, niestety dużo czasu serwis pochłania. Jest dużo rozbieranka i rozkręcania, gdyż wszystkiego jest razy dwa, czyli cylindry, głowice, walki, łańcuszki itp

What's the song at end?

I wouldn't adjust valves on any bike unless they make noise. When I brought my 2002 VFR in for an oil change the shop wanted to adjust the valves, I said no way. BTW, never use a K&N oil filter, I had one fail on me. I got lucky, it happened when I parked the bike after getting off the freeway!

my thinking exactly,that many dodgy mechanics i couldnt tell if the valves were done or not.

Lol, I'm watching 144p with buffering because the internet suck where I'm right now.

Is it not easier to open KZread, find a tutorial how to adjust valves in VFR V-tec + read the Honda's manual and do valves adjustment on your own? You save mony and lear something new. It is kind of Win - Win situation :)

@HeroRR

6 жыл бұрын

+MOTOManiek I've read into the process and it is quite advanced actually and although I'm not stranger to rebuilding engines I would be very worried working on my daily driver. If you mess up the cams while doing the valves then you can ruin the engine so it's too risky for the very tiny reward.

@milodoe

6 жыл бұрын

I had exactly the same feeling when I started taking care for my own bike. When you combine youtube, manual and friends knowledge about e.g. valves adjustment it will become suddenly easy job to do. At least I did so. Take couple of beers, a friend who knows how to do it and spend some time in a workshop to fix it or at least check it if then actually need any adjustement:) Anyway, good luck :)

Legal in Europe lane filtering

If the valves aren't ticking they are good to go. If it costs $750 to have them checked and adjusted every 16k, why not consider running it til it dies. You can then buy a low mileage salvage engine for less than $1500. But each to their own. If the bike lasts til 100k then that's 6X valve checks at $750=$4500. How much is a replacement bike?

Why do the valves mines done 60000miles still good on a gen 5 you can get a engine for peanuts full power and all valves on the gen 5 all the time 😁

it actually just holds the valves open longer and further

@weedtastic

6 жыл бұрын

no it doesnt, it isnt like the Car VTEC.

@BigBadLoneWolf

4 жыл бұрын

at low revs, the engine only uses 2 valves, at 6800 rpm the second valves are operated, this gives better low end torque and more power at high revs