My steering box failed, which caused the traction control light to go crazy during left turns and created a large dead spot in the wheel. I have already replaced the entire front-end suspension, so this repair should be the final one! I can't wait for this nightmare to be over, lol.
@4x2WagonFamily
4 ай бұрын
Bro, I can totally relate. Good luck!
@juanz0012 жыл бұрын
Appreciate your content!! Keep up the good work!
@nonayerbidnet69748 ай бұрын
Good video.Thank you.
@peteyuresko694911 ай бұрын
Thank you very much for putting this video together. Your videos are usually very helpful. One question I have is now that it’s been a year. Do you feel like the gearbox was enough in for low range and your axles locked?
@4x2WagonFamily
8 ай бұрын
It’s does well if the air pressure is around 20 lbs. Anything below that it struggles when locked. I’m going to install ram later this year.
@JeepTJay6Ай бұрын
What would you say the big bore box weighs (ball park) I just ordered one for my TJ. I'm assuming it won't be as heavy as yours but I'm planning on bringing it home to Taiwan on my flight in check-in baggage. 😂 13:54 Man that's a well maintained suspension system. Squeaky clean! I like your style.
@4x2WagonFamily
Ай бұрын
25-30 lbs, thank you!
@timking21942 жыл бұрын
Great video
@taylorcampbell98511 ай бұрын
What kind of differences have you felt in the steering if any. On and off-road differences?
@gixxer1359 Жыл бұрын
Did you use recommended swepco fluid or an alternative? Great video , hoping to get rid of the extra play in the steering wheel as well.
@4x2WagonFamily
Жыл бұрын
No, I used ACDelco PsF. I think equally good.
@sdiaz15402 жыл бұрын
Did you install just the steering box or did you also install the power steering pump? Been thinking of installing PSC box myself but don’t want to dish out the money for the upgraded steering pump yet.
@4x2WagonFamily
2 жыл бұрын
Only the steering box. Like you i didn’t want to shell out 500 extra for the pump. Honestly, you won’t need it:) cheers!
@charlestatum32262 жыл бұрын
Where did the O ring go that was attached to the steering box when it was packaged?
@carlosfontanez929 Жыл бұрын
Hello, This video is i believe a little over 8 months old. I was just wondering, How is the PSC box holding up using the OEM steering pump and reservoir? My OEM box life is done and was thinking of getting the PSC.
@4x2WagonFamily
Жыл бұрын
So far good. I haven’t notice cavitation in my fluid when I do check on the trail. Super stocked with my investment.
@JeepTJay6Ай бұрын
Do you know of any reason the cooler couldn’t be mounted vertically as apposed to horizontally across the grill?
@4x2WagonFamily
26 күн бұрын
As long as it doesn't interfere with the inlet and the return, you should be fine. However, keep in mind that the engineers designed the [product] to be mounted in a specific orientation.
@Wasted_wages1228 Жыл бұрын
Hey, was wondering how was your steering without the ram? Thanks
@671JK4 ай бұрын
Is the stock steering pump strong enough for that? Thank you for sharing your build.
@4x2WagonFamily
4 ай бұрын
I’m still running stock pump with no issues so far. 🙏🏽
@671JK
4 ай бұрын
@@4x2WagonFamily 🙏🏽 that’s good know , I be going that route wit the PSC as I now have 38”. Love the content you put together and thank you for sharing.
@kazwalker764
24 күн бұрын
FYI, PSC recommends against using the stock pump, they say it's likely to wreck the pump.
@gregoetker13892 жыл бұрын
I see you have a Metalcloak lift
@pennypackmtb25424 ай бұрын
Your old fluid looks cooked. You might want to improve the cooling for it.
@joerouth625511 ай бұрын
Buy any chance did you have a sector shaft brace on your OEM box?
@4x2WagonFamily
4 ай бұрын
No it did not .
@joerouth6255
4 ай бұрын
I had similar issues. I put sector brace on my jk. Hopefully that’ll serve as a nice band aid for a while. You have a nice build.
Пікірлер: 31
My steering box failed, which caused the traction control light to go crazy during left turns and created a large dead spot in the wheel. I have already replaced the entire front-end suspension, so this repair should be the final one! I can't wait for this nightmare to be over, lol.
@4x2WagonFamily
4 ай бұрын
Bro, I can totally relate. Good luck!
Appreciate your content!! Keep up the good work!
Good video.Thank you.
Thank you very much for putting this video together. Your videos are usually very helpful. One question I have is now that it’s been a year. Do you feel like the gearbox was enough in for low range and your axles locked?
@4x2WagonFamily
8 ай бұрын
It’s does well if the air pressure is around 20 lbs. Anything below that it struggles when locked. I’m going to install ram later this year.
What would you say the big bore box weighs (ball park) I just ordered one for my TJ. I'm assuming it won't be as heavy as yours but I'm planning on bringing it home to Taiwan on my flight in check-in baggage. 😂 13:54 Man that's a well maintained suspension system. Squeaky clean! I like your style.
@4x2WagonFamily
Ай бұрын
25-30 lbs, thank you!
Great video
What kind of differences have you felt in the steering if any. On and off-road differences?
Did you use recommended swepco fluid or an alternative? Great video , hoping to get rid of the extra play in the steering wheel as well.
@4x2WagonFamily
Жыл бұрын
No, I used ACDelco PsF. I think equally good.
Did you install just the steering box or did you also install the power steering pump? Been thinking of installing PSC box myself but don’t want to dish out the money for the upgraded steering pump yet.
@4x2WagonFamily
2 жыл бұрын
Only the steering box. Like you i didn’t want to shell out 500 extra for the pump. Honestly, you won’t need it:) cheers!
Where did the O ring go that was attached to the steering box when it was packaged?
Hello, This video is i believe a little over 8 months old. I was just wondering, How is the PSC box holding up using the OEM steering pump and reservoir? My OEM box life is done and was thinking of getting the PSC.
@4x2WagonFamily
Жыл бұрын
So far good. I haven’t notice cavitation in my fluid when I do check on the trail. Super stocked with my investment.
Do you know of any reason the cooler couldn’t be mounted vertically as apposed to horizontally across the grill?
@4x2WagonFamily
26 күн бұрын
As long as it doesn't interfere with the inlet and the return, you should be fine. However, keep in mind that the engineers designed the [product] to be mounted in a specific orientation.
Hey, was wondering how was your steering without the ram? Thanks
Is the stock steering pump strong enough for that? Thank you for sharing your build.
@4x2WagonFamily
4 ай бұрын
I’m still running stock pump with no issues so far. 🙏🏽
@671JK
4 ай бұрын
@@4x2WagonFamily 🙏🏽 that’s good know , I be going that route wit the PSC as I now have 38”. Love the content you put together and thank you for sharing.
@kazwalker764
24 күн бұрын
FYI, PSC recommends against using the stock pump, they say it's likely to wreck the pump.
I see you have a Metalcloak lift
Your old fluid looks cooked. You might want to improve the cooling for it.
Buy any chance did you have a sector shaft brace on your OEM box?
@4x2WagonFamily
4 ай бұрын
No it did not .
@joerouth6255
4 ай бұрын
I had similar issues. I put sector brace on my jk. Hopefully that’ll serve as a nice band aid for a while. You have a nice build.
Do you need to buy a drop pitman arm?
@4x2WagonFamily
4 ай бұрын
Nope, it came with the correct pitman arm.