Guy kept drifting haha

Put toothpaste on top of the pin. Lower hood then the paste will mark the drill spot.

Did noone else notice the secondary "way" joke at 0:35? lol

lol, i actually have hood pins... i just kinda sorta forgot to latch them before my run..

I put some hood pins on my 1999 Geo Metro, just never know when that hood gonna take off at 65mph

Don't you need to add some sort of sealant to the drilled areas to protect the Carbon Fiber from moisture?

Need to remember this when I find a light weight hood for my car.

Hoodpins look beast anyway!!

Japanese car? Use flush pins. Muscle car? Use old school pins.

I suggest toothpaste to mark the holes. Dab a little on top shut the hood on the pins and then the toothpaste will mark where you ought to drill

just a tip to try, when marking where you need the holes to be made on the actual hood just put a dab of paint in the rods and close the hood

Quick tip for marking where to drill. If you find yourself a paint marker or a dive stick you can put some right on the pin and it will Mark the exact spot and how big it needs to be when you set the hood down on it.

These old integras are looking sexier and sexier every year. The pendulum swing is coming back.

Very nice tutorial. You can't beat old school pins. Love it.

My hood just flew up at the drag races smashed a lot of damage bringing me to this video!!! If you are in and out of you engine bay get them!

The latch is BONDED on?! I thought it was bolted on. No wonder hood pins are necessary!

The hood pins. Makes the car looks a little more dope!

6:34 RIP earphone wearers

Nice to see an install video like this. I'd need the pins in case the latch on a hood breaks, since my remote start and factory immobilizer won't arm unless the hood is latched.

this is real nice. I have understood the primary function of these hoodpins. Thanks.

your guys videos are awesome been a customer since 2003, thanks a bunch!

Big gap on the left corner !!

i like the flush mount hood pins, they look better than the old school style

thanks for the video took me about 2 hours i did my pickup a bit different didnt have holes ,

your videos help me so much !

Tip, use a white paint marker, and put it on top of the bolt. Then after you set hood down wipe off quickly to remove paint from bolt. You’re drilling through hood anyways so don worries about paint mark

great video, very concise..subbed!

Found this very useful! Now I know how 😎

You should epoxy the raw edges on the carbon fiber so it doesn't break down with moisture

Nice video Every day with internet we learn something

Great video!

great tutorial!

i love this show

looks clean... do you guys have a side marker install video???

Omg its HEISENBERG!!!!!

@AnythingLoud

10 жыл бұрын

Sorry, not even.

Can you guys do a video on hood scoops?

Unless you use a secondary WAWAY to latch them.

Can you make a video on the correct way to do a 98-01 conversion etc? My bumper wont fit on all the way and passenger side is uneven, idk what im doing wrong

I'm making some at work. Stainless steel hood pins;)

they look cool

so, does one simply discard the wiper fluid sprayers?

If you use a PCD bit you dont see any fraying on the fibers...

you could also put a little tooth paste on the hood pins instead of using a sharpie then rest the hood on it to mark where you drill the hole.

Does the pin rattle? Will it rust over a period of time? :).. tq

What size wheels are on that integra

Do you have any videos or pictures of carbon fiber hood pins on a carbon fiber hood?

I don't kno if my other question made it up but I kno if u crack through carbon fiber clear and touch another metal to it it starts to rust so I'm still kinda lost on the carbon fiber hoods and hood pins install if u could answer it would be much appreciated

this will be useful

Heyyy dat looks pretty goood

Where can i get those clear headlights ?

I measured once and cut twice.

how aout a project integra air "intake" video? and cold air intake vs short ram?

Will they fit on my Honda?

That Integra really makes me miss my GSR.

I think the flush version is better as it won't rust and looks more discrete.

GET THEM

I found that a little dab of white grease on each pin and resting the hood on them is more accurate than using a sharpie

YEAH drifting!!

use white grease on the top ofyour pins to mark the spots, much easier.

Sonoma Raceway / Infineon raceway from the drifters clip.

Will these be good if the hood doesnt have a latch ?

@AndysAutoSportTV

4 жыл бұрын

Yep!

ive been over 200mph in 3 different cars, one i owned, never once have i seen hoods flying open. guessing this is one of those solutions without a problem

Ahaha that was at sonoma!

What kind of rivets do you use for example stainless steel , aluminum, exedra?

Make a how --side markers video please

should have used the grease trick. Put a dab of white lithium grease on the top of the pin and lightly close the hood. Then you have a white mark where your pins need to be.

Can I buy this Integra

You can put toothpaste on the pins when you are seeing where to drill the holes instead of marking it with a sharpie

Instead of using the marker using tooth paste and put it on the hood pin and it will leave a mark on the hood

I feel like you would have been better off backing those rivets with washers before popping in place

5:47 Been listing to Drake too much?

so anyone can open your hood then?

a n x i e t y k i c k e d i n

You probably wont notice any rattling and that metal looks like stainelss steel :)

I bought an audi with hood pins and i hate them because whenever you pull them out you scratch the hood.

@somepwnguy

10 жыл бұрын

Yeah they just pull straight out to the side. I cleaned them up with a wire brush and oiled them so it doesn't happen so often anymore.

@ 07:41, look at that gap. Yikes!

I have 3 latches so there's no need for hood pins :)

@penrynpatriot

10 жыл бұрын

im hoodless, fenderless. go bucket T! lol

NONONO this is why you need hood pins!! RICER HONDA SIR EPIC FAIL

Factory hood-latches & aftermarket latches are not to be trusted 100%...all it takes, is one failure to experience a failed hood-latch at speed to make a believer in hood-pins...Just why car designers created forward lifting hoods is beyond me...just waiting for the one time to fail...

Just use a ratchet strap lol

He used the most generic hood pins tho