get a piece of cardboard and push the screws into them in a line and label where they go to

@MegaPancakes

Жыл бұрын

Real men of genius

@fvsoutherngirl

Жыл бұрын

That’s an award winning good idea!

@alexboyer7515

Жыл бұрын

​@@fvsoutherngirl taking pictures to reference after is not a bad idea either.

@johnhamilton9229

Жыл бұрын

Rip some duct tape and fold over. Label tape. I gotta hand it to you. That’s a deep dive doing dock side maintenance.

@gruffytickles8076

Жыл бұрын

He first has to find the cardboard, find a pen or sharpie this all takes valuable time and energy. Simply putting them down and forgetting saves a ton of time on the front end. Cardboard works great I know a few engine builders that use the cardboard trick, I've done it. Works a treat

The idea of gym equipment making power for the gym is genius. If the crabbing falls through I think you just found something to fall back on. Hahaha love the content!

We need to meet your parents!! I love to meet the people who raised you.. Your great..

You're a great example of dedication and hard work- definitely makin' your parents proud 💪🏼 they raised you tough and honest👍🏼

So funny luke my brother im lmao because i think its me your talking about ! you are so cool too !

My life of 72 yrs now is and was fake it till you make it, which has helped me get to retirement at which time I fake til I make it. You are a joy to watch. Keep on with your videos.

You just make me laugh so much. So glad you are making videos, I need to laugh more ! 🤣

@fvsoutherngirl

Жыл бұрын

I’m really glad I can make you laugh!

@fvsoutherngirl

Жыл бұрын

That’s one of my favorite things to do is make people laugh!

You kill me Luke! Really enjoy your common sense approach to life and your work ethic. Wait did I just say “work ethic “? Keep up the great videos my friend, they really are terrific! 😮❤❤

@fvsoutherngirl

Жыл бұрын

Thanks for watching!! You’re always so supportive!

You talk about the gym and your perspective about people having routines and just knowing what to do. I feel exact same way about you crabbing. But you know what to and whats going on and you have a routine. And you have that through learning and repetition. Same applies to the gym my guy🤘🏾

I work like that too. It’s an ADHD thing for me. I usually put fasteners back with the thing they’re meant to attach but sometimes I just get too busy and distracted and have to figure everything out the hard way later. 😂

@fvsoutherngirl

Жыл бұрын

Pretty much exactly how my life works too 😂

Luke, watching you is like watching me. I was nearly in tears with the screws in little piles. I do the same thing. Although I have gotten a little better at keeping things somewhat together. I bought a handful of markers (because l can never find one when I need it) and some small snack baggies, instead of writing on the bag, I use the back of an old business card or something like that and label what's in the bag. I wish I could say it gets better as you get older but I'd be lying. Your doing a great job on the boat.

I love how true and open you are! It’s amazing!

@pah3108

11 ай бұрын

TOTALLY AGREE👍🏼

I am totally in agreement with you. I am 68 and still working on my boat , it never ends .I like your style and enthusiasm well done young man . 🇦🇺👍

Ziplok bags and markers! I was typing it, when you said it!! 😂😂😂

I have about 25 of those magnetic dishes from Harbor Freight that I use when disassembling things in my shop. I keep them in a line on the bench in the order that I take stuff apart. the only problem is that you need to super glue the magnets to the bottom of the dishes before you use them because they ALL fall apart the first time you use them. Works for me, I'm sure everyone out there knows what I mean about the magnet coming off ...

Repowering and cleaning up a solid as a rock 1987 Hydra Sport 2200wa

I absolutely love your comments about the gym and not wanting to exert energy unless you are getting paid. Amazing logic and I approve.

"Encino Man" from 1992 with Brendon Fraser as the caveman. Good movie!

@mlguy8376

Жыл бұрын

Over here in the UK that movie is called “California man” it had a funny vhs case.

You get the cheap foam cups and write on the cup what they go to.when your tearing something apart you stack the cups inside of each other then you remember what order to put it back together again and what screws and bolts go to that part.

I’m currently drywalling my garage, whoopee!

Egg cartons make great organizers for all types of fiddly things

Thank you keep up the good work

Luke, you're the real deal, our government needs to be cleaned out and filled with people like you. A good attitude and great values to make America great again, just wishful thinking. Your content is real and full of life, and that's why I enjoy them so much. Good luck and best whishes and keep the fantastic videos coming.

@luisaraujo4708

Жыл бұрын

🤣😂🤣😂🤣🤦‍♂️ You had four years of your favourite incompetent occupying the chair behind Resolute Desk and achieving no thing and you’re still spouting his nonsensical rhetoric. What IS wrong with you?

@10:35 that could be a submarine for titanic exploration....got and advance joy stick for controlling....go to home depot to make the rest or find some random items to fully inclose it for some deep sea diving....put a go pro on the outside to spot some crabs for future pod drops

Man you remind me of myself so much 😂 so many piles of screws and squirrel distractions in every direction 😂 once ya start putting things back together the screws will magically go back to their proper homes 🤘🏼

@fvsoutherngirl

Жыл бұрын

I hope so! 😂

I do the same thing with the screws!! 🤣🤣 I feel you man!

@fvsoutherngirl

Жыл бұрын

It’s a toxic trait!

@willrider2401

5 күн бұрын

I guess I’m not the only one with the power screws left in the boat. Let me give you guys a little suggestion. I keep all my extra screws in my boat toolbox right next to the flare that way when I’m sinking and I reach for a flair. I look at the screws and remember oh yeah that’s why I’m sinking

Great motors!! Any caterpillar motor is a great one..with a few exceptions..

Baggies, post it notes and sharpies are your friends!! Put the screws(things) in the baggie, write what they are and where they go on the post it note with the sharpie, and put the note in the bag of screws. It happens EVERY TIME! Bags and bags of stuff....I have worked around and probably don't need anymore. Ugh!! LOL...fish out of water. Anyone gives you stink eye..... invite them down for a "waterman" workout fixing up the boat!!!! Those are mini-jet boats!! Hell yeah brother!!

ALOHA from big island Hawaii. Love your show great life hard but humble got to love it to live it.

Lol. That splash guard on the jetsons boat looks like one of those cones they put on a dogs head after surgery. Get the baggies. It’s worth it. I work on CNC machines & get as quickly distracted as you. It’s much easier to come back to bagged & tagged hardware.

@fvsoutherngirl

Жыл бұрын

It totally does 😂

Omg. I can so relate to all of this. 😂

Another GREAT video Luke!

I like the shaft coupler for the steering arm!

You’re so funny and a good way ….Tiny Houston MS

Brother I'm just like you. I do the same stuff working on my boat. I'll be working on something go to get a tool and pass by something that needs attention and start working on it. Instead of just finishing what I'm working on then getting to it. The next thing you know I'm working on 4 different things at the same time. I'm so sick of climbing in and out of the boat because I forgot something 😂. I'm in Florida so I'm working in phenomenal heat and every day it rains multiple times. I sit in that pure white shining tub and sweat to death 😅 I did 12 hrs on it yesterday cracked a rib and completely dehydrated myself. All this for a fishing/pleasure craft that sucks the money and sweat out of me and doesn't make a dime for me😂. Sometimes I wonder why being on the water is so important to me. I spend more time working on the boat and trailer and doing maintenance than I do on the water😂. Actually I know why I do it. It's that beautiful smile on my wifes face when we are out on the lake. I'm still new to boating so I enjoy being out there but there's always that sense of responsibility and dread of dealing with the dock and re loading the boat on the trailer.

I'm so invested in ur vids...lol! Ur great and love the vids. 💯

@fvsoutherngirl

Жыл бұрын

Thanks for watching!

Get some Flex Seal paint for the roof, it covers great, is very resilient, and lasts a long time!

I absolutely love ❤ you & your thought processes!!! Keep doing you Capn Luke... I enjoy ur thinking. work ethics and faith to just "try" just to see if... 😅😅😅😅keep on 🦀🦀🦀🦀🦀🦀...always praying for ur success😊 Boaters' 😢 version of Autos' "pic a part" graveyard!!!

STARTED SMILING WHEN YOU SAID ELK RIVER AND I THINK I SAW TURKEY POINT. GOD I MISS MARYLAND, BUT HELLO FROM A MARYLAND EX-PAT IN BUFFALO, NY...

My project is a 1974 glasstron 18 6 135 HP Johnson. Miss Goldie. Yep

The Googles said those are Kawasaki Jet Mates. Made for 3 years, 89-92, seats 3, top speed 25-28MPH. Pretty cool.👍

Love your rambling speech about not sure what it was about

@fvsoutherngirl

Жыл бұрын

Thanks for sitting through it! Haha

Blue tape and a pencil!!! dont need to worry about ink, can sharpen with a knife. stick a piece to the dash, write "floor access panel", "Window", "Hatch" I have the same problem. my worktable is adryerase board. Can write notes, labels, instructions down on the table.

Sandwich size ziplock bags, write on the bag. Been saving me headaches for years.

Hey Luke.. Love your channel!! I'm a carpenter for a living, but I grew up and still live on Kent Island. I'm from a family of woodworkers, piledrivers, and watermen. If you ever need help with labor, material, tools, etc...let me know. I'd be more than happy to help with whatever I can! I'm looking forward to watching you this coming season. Good luck, bud.

Jack of all trades, master of none, go Luke, you got this 👍

"we're gettin things done out here" would be great on a t-shirt

The thing about the log splitter cylinder is when I realized that I trust and believe this channel 100% My brother, You are doing EXACTLY what you should be doing, I *love* your content and your choices! Indeed ! Why the funk am "I" like THIS!?! You're one of my favorite online celebs. I ditched cable tv about ten years ago. I watch a lot of KZread. Be well.

Your work is better than most of the keyboard worries for the bests bluse from the sea

Jet mate! I have seen them raced before, super cool, that windscreen is aftermarket, they disnt have them stock, some had a mettal roll bar brace

Dude, get masking tape and put screws on the tape tape to the item you took them out of. You won't NEED to keep up with a bunch of stuff. Omg. Me n my dogs need that little boat!!! I love it. Just my size I'm 5" it'd be great!!

Tong some oysters 🦪 up this winter! Better than the gym!!! Lol

Luke on a boat it's a deck not a floor.I watch all your podcast great job

Fire launch missiles lol

Put em in the top of your 100 yr old toolbox!😂

I do the same piles of screws but i rip a strip of painters tape and write with a sharpie where they go or even write. # on the thing they goto and the same # on the painters tape

Luke, just get on with the screw removal/lose/sanding/painting! I agree with Tractor Supply v Marine specific stuff!😊

Awesome video

Dude my tuna and lingcod skipper up in Canada is almost your identical twin. Has all the same mechanical habits. He only has hammers in his tool box.

OMG you crack me up!

@fvsoutherngirl

Жыл бұрын

Thanks for watching

Ill take it all apart and throw it in one bucket even if parts takes months when you do it long enough and buy enough bolts you lose you will learn to remember lol love the vids keep working hard bud everything great comes to who works for it man

If you’re recording while working on your boat, just rewatch the video to refresh your memory on what goes where… simple as that. 👌🏽

Zip lock baggie and a sharpie works.

Get some little zip bags and label them for your screws. It'll keep you from going nuts.

Zip loc baggies and a sharpie - put your screws in those - you can label and help you remember !!! I love seeing the work on the boat - really good stuff - what about the other boat you bought - did that make it back to maryland ??? Maybe just maybe those people at the gym were staring because they recognized you from TikTok or KZread and were just too star struck to come up and say Hi !!!! PS I love Jimmys Famous seafood now - found them because of you !!! Can’t wait for next video !!!

@fvsoutherngirl

Жыл бұрын

Yes we made it back!

No a lot of us do crazy things. I installed a large jet ski in the bottom on Mr my 12 foot air boat sled. Man oh man would she fly and and turn on a dime with two inches of water

Get some painters tape remove stuff ,drop screw back in the fixture n tape flat over the screw heads , every thing U go to refit has its screws on it

You might like the channel EIS Alaska. They are redoing a commercial fishing boat . They commercial fish and crab in Alaska

I have one of those Kawasaki jet mates, they’re a blast to rip on the bay! We call it the bathtub

@fvsoutherngirl

Жыл бұрын

That’s great! Would love to see one in action!

Encino man, with brandon Fraser as the caveman I just watched it recently

X turbine mechanic if you told me, you’re missing a screw you can get strip search and then we go through everything until it’s found

I do the same thing with the screws lol

😂. Sad thing is I can relate. There's a reason your out on the water.

If you hire people to work on your boat, the better shape and better looking the boat is in the better care they will take of it. The captain sets the standard. Love your videos. Your coman sense will take you a dlong way.!!!! Not much of it left in the world today.

Squirrel! ADHD, it's all good. 👍

make a dedicated fittings box with lables and leave it on the boat.

Keep a box of small zip lock bags on the boat.

You could use your socks for the screw organizer

thats a kawasaki jet mate. i used to sell them at kawasaki dealership back in the day

2:33 take a pic of the screw as you put it on the counter and text yourself what it goes to.

Just put the screws all in one pile and when you need them to know where it’s at and the same pile

The movie you were describing was Encino man

You remind me of me 30 years ago😁

Old Cupcake baking tin for screws

If you don’t finish the Boat, You Ain’t No Crabber! 😂😂

@fvsoutherngirl

Жыл бұрын

I definitely won’t finish the boat! 😂 not today atleast

Throw some bags into the tool box or use tape :)

I went to check bilge pumps today and wound up starting 20 other things..got about 4 things done..left without checking the pumps 🤣

@fvsoutherngirl

Жыл бұрын

That’s exactly how my life is

@noluckchuck1368

Жыл бұрын

@@fvsoutherngirl I'm on the docks now...wrong secondary filter...go figure 🙄

Get a roll of painters tape and tape the screws to whatever you took them off of.

Good video

@fvsoutherngirl

Жыл бұрын

Thanks.

Bro 😂 let me tell you a little secret about the health club. When you sign up to be a member. YOU GET A FREE TRAINER TO SHOW YOU HOW IT A WORKS ALSO WILL HELP YOU TO FOLLOW A RUTEEN

I watched a video of. a guy who rebuilds autos after being damaged. He puts all the screws and small parts in labeled zip loc bags.

Time to get a pen and pad. And don't call me Shirley. 2:04.

Get to work CAP! Crabbing season coming up! #shorelife

Also get u some of the new rust paint.. it will actually make stuff quit rusting!

Bro those screws go in a random cup holder not sorted out in little piles. What good are cupholders if you don't poke a hole in your cup with a leftover screw 🤷‍♂️🤣 come to texas I've got a couple motors to install, some outboards to swap and a bunch of spring services coming up!

@fvsoutherngirl

Жыл бұрын

You’re totally right about the cup holder! Haha hard pass on the motor swapping

This was thirty odd years ago My then girlfriend now wife was with me at Lake Havasu Arizona she was topless so everyone boating by flipped a u turn to check her out and a mini 8 to 10 foot boat like the two you have came racing by so fast that when he u turned his passenger flew over him at least 25 feet it was amazing how fast it turned and I have wanted one since restore them both one for your girl she will love you for it think of all the hours she puts in helping you anyway had to throw in the topless part to make the story better....

As for the specific screw that was shown, it’s either a round, raised, dome, or truss, etc. but definitely not a “flat”. Flat screws have under tapered heads, bugle, etc. not square seat areas. Plus the top / dome of the screw shows uneven wear, so it wasn’t made that way. Not being critical, but I’ve installed 10’s of thousands of almost every style of screw available and it’s important to know, especially when ordering replacements. JS ✌🏻

@koaasst

3 ай бұрын

Flat Head drive, or slotted, is what i assume he meant. my aspergers recognizes your aspergers, o7

@KING-FU

3 ай бұрын

@@koaasst You know what happens when you “assume” things right? If that’s what he meant, he should’ve said it. Also, the Walmart location you visited should provide you with a full refund for the Psychiatry PHD you purchased. JS

@koaasst

3 ай бұрын

@@KING-FU its ok to be on the spectrum man. you went full on fun with flags with screws, and all he said was 'this one inch flat head screw' while the camera was focused right on the darn thing. lol, its all good, im not trying to insult ya, i just knew what he meant. as opposed to phillips, robinson, torx, etc. side note, personally ive probably installed 3" torx deck screws the most, followed by 1 5/8" drywall screws, then 1 5/8" torx, then 11/4" drywall, with #1 robinson trim in lengths of 1 5/8" and 2 1/4" bringing up the rear. i could talk screws all day. tapcons, tappers, lags, metal roof of various types, and those little sharp af black phospahte 1/2", cant forget them, one of my favorites. the pocket screws with their big heads come in handy often, as do the lathe screws, especially the tappers of that variety. but i did inherit a 5 gallon bucket a few years back, full of nothing but slotted screws, of all varietys, from brass to zinc to stainless. i use them for therapy, as sorting them is a relaxing pasttime ive found to relieve my highly anxious state at times. but i would never use them, unless in a decorative fashion, where they can shine. i havnt haammered a nail since a vinyl siding job where i hung the pvc fascia with the little ring shanks. pneumatics for roofing and interior trim are ok though. my garage sale old craftsman framing gun would have beef with me if it were sentient, but its in good company in a nice shed with other tools from a bygone era, such as the old steel miter box, hand planers, wooden levels, and other impulse buys from years of browsing thrift stores and yard sales. if only i had any charisma, id try this youtube thing out myself. i have this squirell problem though you see. have a great weeknd.

@KING-FU

3 ай бұрын

@@koaasst WTF are you on about? You’re obviously mental, but that doesn’t make you qualified to determine clinical mental disorders for someone else via YT. Did you ever think that my motivation to clarify comes from spending a lifetime in construction and I tire of content creators BS ing viewers with improper terminology. Surely not. FO Troll.

If you're going to do it do it right the first time that you don't have to worry about it for a long time put tinkering around with it doing a patch job and they here and there the do it right the first time and you'll be done with it make sure you do a good job got a cat doll and crabs oh yeah😅

Post-it notes.

Ziplock bag with a sharpie like you said

@fvsoutherngirl

Жыл бұрын

👍🏽👍🏽