❤❤❤ more videos like this please 🙏🏾 thank you ❤

That was an amazing tutorial! Thank you.

@yehualashetredie8566

2 жыл бұрын

I like it

Now that’s pretty cool!! Thanks for sharing…going to give it a go cheers ☺️

@BearBearCammy

2 жыл бұрын

You are so welcome! Thanks for dropping by too 🥰

I can’t get the terrazzo effect even after sanding a lot .. what should I do

so cute! love the colours a lot!!!

@BearBearCammy

2 жыл бұрын

Thank you so much!!

Very nicely done

@BearBearCammy

Жыл бұрын

Thank you ☺️

Nice.. Lovely work.. Where do we get that mould mam.. Pls if u hve any link... Pls share mam

@BearBearCammy

Ай бұрын

Link was already in the description :)

Beautiful ❤️❤️

Thank you for sharing

@BearBearCammy

Жыл бұрын

Thank you for dropping by :)

Beautiful Thanks you. Please the white cement is the one I can buy at Home depot?

@BearBearCammy

2 жыл бұрын

Hi dear, I’m so sorry that my country do not have any Home Depot. I got it from my local hardware store in Malaysia.

@BearBearCammy

2 жыл бұрын

So I’m not sure 😢

I have tried a lot to make show piece by using the mixture of plaster and white cement, but failed. It was so fragile I could not make any product. Can you please tell me how can I get proper result?

@BearBearCammy

Жыл бұрын

Try to make it by using only white cement. If that work, something wrong with the plaster. Try to change another plaster.

Hello how are you? I live in Brazil and I want to make cement pieces. Here the cement is always mixed with sand and I see that you use it only with water. Could it be that the material similar to this is mortar?

@BearBearCammy

2 жыл бұрын

Hi, I’m good here. I’m from Malaysia and our cement here only mostly mixed with water. But for some construction use, they do mixed it with sand for more durability. I’m not sure all the cement is standard or not. But why not you try a small portion mix only with water? If it work, it shall be the same. Good luck 😊

Thank beautiful! 😍😍 Can you use this as a candle vessel jar? 🤔

@BearBearCammy

Жыл бұрын

Sure why not?

@adelaeiseltova5117

Жыл бұрын

@@BearBearCammy Thank you! I was just wondering because it looks a little bit fragile. But I will deff try it and see 😍

Is there an exact measurement of water

@BearBearCammy

3 ай бұрын

Hi, sorry i do not have any exact measurement for this. But i will take note on this :)

Love from Pakistan dear

@BearBearCammy

10 ай бұрын

Thank you ❤️

This is really a good video... Do you another name of that spray

@BearBearCammy

2 жыл бұрын

Im using Mr.Diy lacquer but this only available in Malaysia. For alternative you can use any lacquer or fast dry gloss finishing acrylic spray paint. :)

Why water comes to top in my mixture? Any idea guys?

@BearBearCammy

3 ай бұрын

The excess water that is not fully absorb by the cement will rise to the surface. Normally i will use a paper towel to absorb the water.

Ciao...interessante questa tecnica...secondo te si può utilizzare il gesso per fare il vaso ? Usando i pezzettini di cemento...grazie per la risposta 👏👏🤗🤗

@BearBearCammy

2 жыл бұрын

Ciao, ho fatto un video di gesso vs cemento. Forse puoi guardare questo video per il confronto :) kzread.info/dash/bejne/Z6Z-lrScedaqndI.html&ab_channel=BearBearCammy

@annasperduto1766

2 жыл бұрын

@@BearBearCammy grazie ..ancora complimenti sei bravissima..👋😍😍

I tried but when I demould it get brake

@BearBearCammy

7 ай бұрын

White cement never break when demould. Either your process is wrong or the white cement got issue.

Hallo, I try to make it one with white cement and dry it for 2 days. But my vessel was easly break while the cement texture that I made is not to watery tho. Do u have any Idea or suggestion?

@BearBearCammy

2 жыл бұрын

Hi, do you mix enough of water? Is your vessel is huge? Most probably it still contain a lot of bubbles inside. You need to patiently tap all the bubbles out so that your cement will be more compact. Good luck :)

would you be able to ask your local store what brand of white cement they sell? the one i bought does nothing. so brittle and cracks

@BearBearCammy

Жыл бұрын

i try to ask when i ever got there again :)

@dolly2959

Жыл бұрын

@@BearBearCammy thank you

Is it possible to start a small business in this way?Or should Jasmonite be used for a small business?

@BearBearCammy

Жыл бұрын

Of course! I saw a lot of people selling this on Etsy. You may need todo more research on what you want to make using jesmonite. Good luck :)

we don't use sandpaper inside of this jar? any reason

@BearBearCammy

Жыл бұрын

The inner of the jar is smooth. So there is no need to sand it.

@hajrasiddiqui684

Жыл бұрын

@@BearBearCammy so when we make tray we also don't use uper side right just bottom side?

@BearBearCammy

Жыл бұрын

@@hajrasiddiqui684 Well, it depends on which type of tray you are using. You will eventually know what you need to sand. Just remember the surface you want the terrazzo to pop out, you need to sand it.

is there any special addition to the white cement dough to make it hard and not brittle?

@BearBearCammy

2 жыл бұрын

Nope. I only add with water. But if your mould is too big or your cement is too thick, you may want to leave it dry (not under direct sunlight) for 2 days.

@mjauhari7861

2 жыл бұрын

@@BearBearCammy okay thanks

Wow

Hi. Where do you buy white cement in Thailand? I cannot find this easily. I live here but I'm from the U.K.

@BearBearCammy

Жыл бұрын

Try look for HomePro bangkok? I believe they do sell white cement.

@ericayoung9373

Жыл бұрын

@@BearBearCammy thank you for your reply! I heard that in homeware shops there might be sand in the cement which is not suitable for this type of craft. Thank you for the recommendation though. Could you perhaps tell me the brand that you use?

Does using black acrylic paint result in black cement ?🤕

@BearBearCammy

Жыл бұрын

Depending on the colour pigment u r using. So far I manage to get a very dark grey colour. Because I don’t have enough of black. I will try to do a separate video on this in future.

Nice 👍

@BearBearCammy

Жыл бұрын

Thank you ☺️

Can you add these chips to concrete?

@BearBearCammy

Жыл бұрын

What kind of chips are you referring to?

Video on stirring

@BearBearCammy

2 жыл бұрын

Did you watch the full video?

i like it

@BearBearCammy

2 жыл бұрын

Thank you 🙂

could you please write the name of the cement that you used... Thanks...

@BearBearCammy

2 жыл бұрын

Hi, there is no name / brand. I walk into hardware shop and tell them I want a white cement. And they weight me the 2kg cement 😅

Which spray are u using glossy or mat

@BearBearCammy

2 жыл бұрын

Hi, for this project I’m using the glossy type.

I try 8 times but every time my cement was crack and broke

@BearBearCammy

Жыл бұрын

Hi, I think time to change to another brand. So far with the correct white cement, mine only broke once which it put it under hot and cold temperature 😬

i know it's called wet sanding but you shouldn't add so much water. you lightly dampen the piece, you can use a wet cloth and wet your piece with it for example. otherwise you get so much water you dont create enough friction to sand and you will end up spending hours sanding.

@BearBearCammy

2 жыл бұрын

Hi, thanks for sharing. Yup, I did that on my projects after this video :)

LOVE THE LORD YOUR GOD WITH ALL YOUR HEART AND WITH ALL YOUR SOUL AND WITH ALL YOUR MIND: THIS IS THE FIRST AND GREATEST COMMANDMENT; Matthew 22-37

@BearBearCammy

2 жыл бұрын

And you, too ❤️

❤️❤️❤️

What is the name of the color?

@BearBearCammy

Жыл бұрын

Any brand of acrylic colour will do :)

how to glue the foil to the cement?

@BearBearCammy

2 жыл бұрын

U can stick the foil on the surface and the sealant will do the job. Foil originally is sticky. If it do not stick, u can add some glue on it.

Hello! Where do you buy the cement please ??

@BearBearCammy

2 жыл бұрын

Hi dear, this is an inexpensive white cement you can get it from any hardware store.

I used Portland White Cement and it easily breaks. It tried drying it for 2 days but it was still brittle (even minimum force crushed it). My ratio is 2:1. What should I do?

@BearBearCammy

2 жыл бұрын

Do you release enough of bubbles?

@abby092609

2 жыл бұрын

@@BearBearCammy Yes, I tapped my mould several times. what are the other ways to release bubbles aside from tapping the mould?

@BearBearCammy

2 жыл бұрын

@@abby092609 what kind of mould are you using? You can try to watch my another video I’m talking about cement issue: kzread.info/dash/bejne/o4lnr7qRacupf6w.html Hope this help :)

Hi Is it waterproof?

@BearBearCammy

2 жыл бұрын

Hi, I wouldn’t say it is completely waterproof. But more on water resistant. Also depending on the sealant you are using and how many coating you apply.

Where we can buy cement moulds.

@BearBearCammy

2 жыл бұрын

Hi I got these moulds from taobao. But you can easily find this from AliExpress, Shopee or lazada :)

@BearBearCammy

2 жыл бұрын

Hi, I have added some links in my description. Make sure to check on that :)

I like your mold, where you buy it ?

@BearBearCammy

2 жыл бұрын

All these mold I got it from taobao. But I believe you can get it from AliExpress too

@christianlagengko6292

2 жыл бұрын

@@BearBearCammy I stay in Indonesia, and you ?

@BearBearCammy

2 жыл бұрын

@@christianlagengko6292 I’m from Malaysia :)

Did you buy the cement on Amazon?

@BearBearCammy

2 жыл бұрын

Hi, I bought the cement in my local hardware store.

@lkenglish9756

2 жыл бұрын

@@BearBearCammy is it Portland white cement type 1?

@BearBearCammy

2 жыл бұрын

@@lkenglish9756 in my country they sell in in separate packaging without any brand. I believe any white cement will work.

👋👋👋

🇧🇷👏🏿👏🏿👏🏿

Are you sure that’s cement that looks more like plaster to me

@BearBearCammy

2 жыл бұрын

Of course it is. I bought it from teh hardware store. It’s white cement. I haven’t try the plaster yet. 😊

Ethiopian