Whirlpool Bravos XL Washer Wobbles at 400rpm
Why does my washer (Maytag Bravos XL MVWB725BW0) wobble at around 400rpm? It then stabilizes by 500rpms. I've replaced the suspension springs, the rotor position sensor, the shaft, and bearings. I did the rod and bearings twice thinking the first set might have been bad. It wouldn't be such a big deal except I can never complete the spin cycle (uL error code) and the clothes stay soaked.
Пікірлер: 8
Sometimes socks can throw them off. in the outer tub, sometimes socks go over the rim and stay on the sides, making weight uneven.
Any updates? Same model similar experience.
@falk0069
3 жыл бұрын
Turn out my *new* suspension rods were to blame. I mention this in my next video and show the difference in the rods: kzread.info/dash/bejne/goVrmZecqK-alc4.html
Either your suspension rods are going, your new shaft is bent, or c you did something wrong when installing them.
@falk0069
3 жыл бұрын
Turns out my *new* rods were bad. I mentioned this in my next video: kzread.info/dash/bejne/goVrmZecqK-alc4.html. Thanks for the advice.
The washer looks like Melissa
Replace the suspension rods
@falk0069
6 ай бұрын
that sadly was my downfall. That the was the first thing I replaced. Unfortunately, they were cheap/crappy replacements. I then replaced the bearings TWICE. Then went back to the original rods (slightly modified) and have been good ever since.