Which Switch Pod is the best (Voswitch vs. Rough Country MLC-6 vs. sPOD sourceLT)
Hey guys,
This episode isn't filled with all the "Specs" but you can find those on the website this is just to give you a look at all 3 installed on a jeep with our opinions and complaints.
Let us know what your favorite system is in the comments!
sPOD: amzn.to/3u3xX4N
Rough Country MLC-6: amzn.to/3ovW8rs
Voswitch 8 button: amzn.to/2QvEese
Пікірлер: 35
Good review. Thanks.
I really appreciate your review
@DownSouth_Adventures
2 жыл бұрын
Thanks for watching!
Thanks for the info. Planning this as my next project. Camp NEEKED
@DownSouth_Adventures
3 жыл бұрын
Shoot me your address on FB and I’ll send you a decal!
budget FTW. fantastic video guys!
@DownSouth_Adventures
3 жыл бұрын
Thanks so much!
Nice video. I'm liking that VosSwitch not just because of price. I had a procomp switch for my Tacoma that worked well.
@DownSouth_Adventures
11 ай бұрын
It was a decent system but didn’t hold up well during water crossings
Seems like a standard rocker would be able to be used in both the RC system and the Spod
@DownSouth_Adventures
Жыл бұрын
It will
If you are running rgb halos, should you wire them to the switch pod along with your other auxiliary lights and light bars since the switch will be connected to the fuse box itself?
@DownSouth_Adventures
2 жыл бұрын
Those are small I would just go to the fuse box and not waste a switch.
On the VoSwitch do you have to press the sliver button on the end to use the others or is a on/off switch for the back lighting
@DownSouth_Adventures
Жыл бұрын
It’s just for the backlighting but Honestly the Auxbeam switch panel is the best one on the market now in this price range.
I’ve relocated my vacuum pump where all of this install. Have you relocated yours and where did you mount it?
@DownSouth_Adventures
3 ай бұрын
Unfortunately Mine is still in the factory location
@roberthippensteele2112
3 ай бұрын
Thanks for the response guess I will need to do some engineering! Lol
Can i connect the switch on high beam?
@DownSouth_Adventures
Жыл бұрын
Hey John I would imagine so… but can’t say for certain
@johnimperial9777
Жыл бұрын
@@DownSouth_Adventures what if i cut the positive wire of the switch and connect it on high beam?
So basically there is no control box that can be fully submerged?
@DownSouth_Adventures
Жыл бұрын
Lol not to my knowledge, some of them are tighter than others, but definitely not waterproof
Just use the auxbeam series of switch panels
@DownSouth_Adventures
10 күн бұрын
That's what I am using now
Once again Budget wins!
Switch pros?
@DownSouth_Adventures
2 жыл бұрын
Unfortunately I didn’t have access to them at the time but I hear nothing but good things about them.
@billwaterhouse5894
2 жыл бұрын
@@DownSouth_Adventures Think I might try it (mod. 9100, 8 switch), very expensive as well compared to Voswitch...but I do like quality 🤷♂️
@DownSouth_Adventures
2 жыл бұрын
@@billwaterhouse5894 It's probably worth it, in most cases you get what you pay for!
@billwaterhouse5894
2 жыл бұрын
@@DownSouth_Adventures so true
I really eyeballed the VoSwitch system for a decent amount of time, because it looked like it was a solid piece that was really going to help clean up and simplify my wiring. I had another, cheaper switch panel installed, then swapped it out, what I will say is, im highly disappointed that there arent dedicated ground terminals in the source box, and you have to run your ground wires to a nut on the frame of the jeep, this made it very complicated as a lot of my accessories are two wires encased in waterproof rubber.
@DownSouth_Adventures
Жыл бұрын
Gotcha, I love this one so far
Intro is crazy long.
@DownSouth_Adventures
2 жыл бұрын
Yep we no longer use that intro for reviews. Thanks for watching