You should make it clear to all that you are a employee of nitecore. There is a clear conflict of interest here.

@khairulnizamare_lone3789

8 ай бұрын

yup.. im agree with you.. theres's almost 1/3% will keep the true content..

@TheTastefulThickness

7 ай бұрын

I thought longhorn was an independent torch retailer

@chuckg6039

6 ай бұрын

There must always be clear full disclosure. Can't just be a quick vague passing comment.

@LaLongueFourchette

3 ай бұрын

This is absolutely disgusting that he doesn't make this very clear that there is a conflict of interest. Never watching this channel again

Love your videos bro! Keep doing what your doing!!

I no what ur talking about I have the pd35 had it for a few years now and it definitely is a pain trying to find the side button especially with gloves I’ve actually had to use my phones screen light to find that function button. That’s why I love my pd 40 with the rotary switch. I never carry my light up by my head like law enforcement,when ur hand is up there it’s definitely easy to turn on and off and cycle through all the different lights but the rotary switch is awesome got ur hands by ur side and u can do everything on off all brightness levels plus strobe and sos all with one hand I love it. But it is time to add a night core light to my collection and the mh12 looks like the one for me

I am all about performance. Function over Form. That is why I ordered the MH12 Pro.

mAh is the capacity. The larger the mAh the more runtime it will have on a single charge for the same output voltage. Think of mAh as a fuel tank and output voltage as how many gallons are being consumed per mile.

Hmmmm def the nitecore, they have never let me down! Thx cool review

@LonghornTactical

9 ай бұрын

Thanks for watching!

Turn the pocket clip so you can use it as a physical index as to where the power level switch is.

@LonghornTactical

7 ай бұрын

Good suggestion!

I liked the PD35R so much, I bought a second one to keep in my vehicle. Yes, I know, that's not what you were testing.😊

@aquasound-escapes898

9 ай бұрын

The smaller 1 gen 3 is awesome. I just slip it in my pocket and it goes with me everywhere. I get 3min of solid turbo so I just keep it set that way.

@LonghornTactical

9 ай бұрын

Right on that's also a classic Fenix favorite!

It looked like the fenix pd36r V2 was throwing light just as far as the nitecore mh12 pro? Am I missing something?

100% agree, I do my own independent research. I have dozens upon dozens of different brands of flashlights from different retailers.. my top three in no particular order are Olight, Fenix, nitecore.

Great video 👏🏾👏🏾

@LonghornTactical

9 ай бұрын

Thank you! Glad you liked it!

Texan light fanatic here.... great video. FENIX is over priced like Surefire for lumen output. Liked and subbed.

@LonghornTactical

3 ай бұрын

Awesome, thank you for your comment!

A better comparison would be with the PD36R Pro. The PD35R is also an awesome light.

well done

@LonghornTactical

8 ай бұрын

Thank you!

I was leaning towards the nitecore just from the runtime and lumens, but after your field test , I'm going with the Fenix I prefer white light over that puke green , WTH nitecore.

@LonghornTactical

4 ай бұрын

Hey, that's why we compare beam shots!

@Defcon666

4 ай бұрын

​@LonghornTactical we appreciate that!

I think I prefer the Fenix. The step-down of the Nitecore is just too aggressive. If the Nitecore steps down to 1200 lm after just 30 s you'll be left with 26,000 cd, while the Fenix will still output 39,000 cd and has a more linear step-down. I like the fact that they show very detailed output diagrams on their website. It feels a bit like Nitecore only offers such high output levels for marketing purposes. For my intended use case, occasionally looking around at night on turbo for a few minutes, but mostly walking on lower brightness levels, the Fenix seems to be well-suited. Also, I think the UI of the Fenix is more intuitive. Sure, you can't access ultralow mode directly and there is also no beacon or SOS, but the way these modes are activated on the Nitecore seem unnecessarily complicated. You have to hold the mode button when the light is activated to cycle through the special modes, meaning if you need strobe and hold the button for too long, you'll end up with beacon or SOS, and you can't access beacon or SOS without going through strobe first. I think both manufacturers should have just put special modes except for strobe on holding the mode button while clicking the tail switch, as is used for ultralow on the Nitecore.

Will the nitecore mh12 p hold up as a shotgun light?

@campcob2839

Ай бұрын

probably but id look for lights with dual springs. better shock/drop resist.

Can you compare them to OLIGHT Seeker 4Pro

This guy use to do good reviews on he's own ytube channel before he was employed by Nitecore i preferred when he was neutral and not bias towards other brands

You cant go wrong with Nitecore or Fenix but i love my Olight Baton 3 Pro Max with warm white the most. Bad weather is coming and that tint its superior to any lumen output. I would say that the brighter the cold white light is, the worse you see (in fog and snowing conditions). Edit: and yet this week i bought a Nitecore BR25 for my bike and a Fenix Nebula cause i put the Fenix hm65rt to the biking helmet.

@aquasound-escapes898

6 ай бұрын

I’m between the Olight warrior 3S and the nitecore mh12 Pro? Which should I get?

@randomescu

6 ай бұрын

@@aquasound-escapes898 this is like Apple vs Android. Olight being Apple aka proprietary battery and charger. Once you get an Olight you will tend to buy only Olights because you already own magnetic charging cables. Nitecore is 500m throw, Olight is 300m. Easy win for Nitecore, but be aware, both flashlights are very slim, under 30mm, im absolutely sure both get warm very fast. Edit: my choice in throwers was an Acebeam L17. They also made L18 and L19 with increased price and throw. L17 use 18650. My point is to buy something with bigger head so it can transfer heat better.

@aquasound-escapes898

6 ай бұрын

@@randomescu “thank you for the pearls” as my grandpa use to say. They each have their pros n cons. What im noticing with nitecore is the fast step down… and im not wanting a light that steps down that quick! So now im looking into the Olight seeker 4 😂 Here we go again 😂

@randomescu

6 ай бұрын

@@aquasound-escapes898 Seeker 4 is not a pure thrower. If you dont need a real thrower, Seeker4Pro is the best light i ever seen.

@sugarray1345

5 ай бұрын

The Warrior X4 is awesome. You really do need to check this one out! Not really an EDC, but an absolutely fantastic flashlight nonetheless.

I took my streamlight protac hlx and lit a cigarette before. Try that with a nitecore and you will simply render your light useless. Down to low lumens. Nitecore needs to make a work light with 4000lumens. 5000 milliamp battery 650meter range. No proximity sensor no stepdown.

It was better to compare mh12 pro vs fenix pd36r pro

@themdrnsamurai

7 ай бұрын

Indeed. I have the MH12Pro but I keep looking at the PD36R Pro....

green tint is a no for me

I woukd have purchased many nitecore. But they keep using proximity sensors. And no thanks i dont need my flashlight turning down my settings.

Can you blind someone in daylight or just in the dark?

@LonghornTactical

6 ай бұрын

Both of them can blind in the daytime! The MH12 Pro especially

The fenix does not have thay stupid sensor that thinks snow is a reason to turn down your brightness level. I dont want any stupid light sensors. If i want to start a fire with my light i want the ability to do such.

Why u compre diffrent lumens ? Ofcourse better mh12 pro because 3300lumens

@LonghornTactical

9 ай бұрын

I chose these two because of the similar battery size, release date, and beam shape, and one thing that I have learned is lumens isn't everything, there are a lot of quality-of-life things that people consider when comparing lights, honestly if the side switches and indicator lights were swapped between these lights, I probably would have called it a tie!

I love my Fenix

@LonghornTactical

4 ай бұрын

Yeah, its definitely a great light!

650 meter throw. 4000 lumens and no proximity sensors. Then you can boast about nitecore Chinese lights. And no green tint

def not the same class, nightcore much better

@aquasound-escapes898

9 ай бұрын

Then you haven’t tried a “real authentic fenix light”. I’d recommend u try a fenix fenix pd35 v3 or pd35r. Very good lights.

@TopDog8762

8 ай бұрын

@@aquasound-escapes898 I would give fit and finish to Fenix every time. I have 5 of them. However I would give it to Nitecore for performance most of the time. Both are great Manufactures. But I own a little over twice the number of NiteCores over the Fenix.

@sengostray7065

5 ай бұрын

@@aquasound-escapes898 seems like pd36r v2 is not a real authentic fenix light for you

Stop shaking your hands !!!!!!!!!!!!!!

The pd36r pro would of been a more even comparson at 2800 lumens

@saschathiede

Ай бұрын

I don't think so. The PD36R V2.0 has a more focused beam and actually higher candela than the PD36R Pro. The beam characteristic is quite comparable to the Nitecore, only that the Nitecore offers much higher brightness for a short amount of time. On lower modes, they have almost identical specs.

@subaruforester5062

Ай бұрын

@saschathiede difference is less then 3k candela you wouldn't notice that by eye 1700 lumens to 2800 you will notice a light brighter tho

@saschathiede

Ай бұрын

​@@subaruforester5062 Sure, the difference in luminous intensity would barely be noticeable, but that also means that the perceived brightness of the hotspot would be similar. The higher luminous flux of the PD36R Pro compared to the PD36R V2.0 would probably just result in a wider hotspot, maybe also more spill. And of course shorter battery life and more heat output. I think it depends if you want to compare lights with similar luminous flux or similar luminous intensity. I prefer that they chose to do the latter, because the luminous flux is strongly affected by thermal regulation, while the beam characteristic isn't. After the step-down the MH12 Pro and the PD36R Pro will have 1200 lm and just under 1000 lm respectively, while the turbo on the MH12 Pro only lasts 23 s to 30 s, about a minute on the PD36R Pro. The turbo on the PD36R V2.0 will last more than a minute, with a linear step-down to 700 lm over the course of 1 h. This means the MH12 Pro will offer 63,000 cd for 23 s to 30 s and 26,000 cd afterwards, while the PD36R Pro will offer 36,000 cd for about 1 min, followed by several minutes of a linear decline to 12,000 cd. The PD36R V2.0 starts out at 39,000 cd and holds that the longest and will reach ~16,000 cd after 1 h. In my opinion, comparing the MH12 Pro to the PD36R V2.0 is clearly the better choice, as in terms of perceived brightness, they will be equal opponents for about 30 minutes. Nonetheless, a comparison of the MH12 Pro and the PD36R Pro would also be interesting. I think it's quite fascinating how much you can tell about a lights' performance by simple physics. All three lights are made from aluminium and have similar sizes and masses, meaning their qualities as heat spreaders are comparable. The NiteLab UHi 40 LED of the MH12 Pro has the highest efficiency, allowing for the highest sustained luminous flux under thermal regulation. Since the beam characteristic is similar to the PD36R V2.0, it is to expected that it outperforms it in terms of brightness in the long run. The PD36R V2.0's biggest advantage is its low power consumption, as it allows the light to delay the point of crossover to around 30 minutes. The PD36R Pro seems to sit right in between in terms of luminous flux, but due to its wider beam, its sustained performance as a thrower will be inadequate. Sorry for the wall of text. I do not intend to sound condescending, I just want to share my thoughts, because I just think it's an interesting topic. :)

@saschathiede

Ай бұрын

@@subaruforester5062 Sure, the difference in luminous intensity would barely be noticeable, but that also means that the perceived brightness of the hotspot would be similar. The higher luminous flux of the PD36R Pro compared to the PD36R V2.0 would probably just result in a wider hotspot, maybe also more spill. And of course shorter battery life and more heat output. I think it depends if you want to compare lights with similar luminous flux or similar luminous intensity. I prefer that they chose to do the latter, because the luminous flux is strongly affected by thermal regulation, while the beam characteristic isn't. After the step-down the MH12 Pro and the PD36R Pro will have 1200 lm and just under 1000 lm respectively, while the turbo on the MH12 Pro only lasts 23 s to 30 s, about a minute on the PD36R Pro. The turbo on the PD36R V2.0 will last more than a minute, with a linear step-down to 700 lm over the course of 1 h. This means the MH12 Pro will offer 63,000 cd for 23 s to 30 s and 26,000 cd afterwards, while the PD36R Pro will offer 36,000 cd for about 1 min, followed by several minutes of a linear decline to 12,000 cd. The PD36R V2.0 starts out at 39,000 cd and holds that the longest and will reach ~16,000 cd after 1 h. In my opinion, comparing the MH12 Pro to the PD36R V2.0 is clearly the better choice, as in terms of perceived brightness, they will be equal opponents for about 30 minutes. Nonetheless, a comparison of the MH12 Pro and the PD36R Pro would also be interesting. I think it's quite fascinating how much you can tell about a lights' performance by simple physics. All three lights are made from aluminium and have similar sizes and masses, meaning their qualities as heat spreaders are comparable. The NiteLab UHi 40 LED of the MH12 Pro has the highest efficiency, allowing for the highest sustained luminous flux while under thermal regulation. Since the beam characteristic is similar to the PD36R V2.0, it is to be expected that it outperforms it in terms of brightness in the long run. The PD36R V2.0's biggest advantage is its low power consumption, as it allows the light to delay the point of crossover to around 30 minutes. The PD36R Pro seems to sit right in between in terms of luminous flux, but due to its wider beam, its sustained performance as a thrower will be inadequate. Sorry for the wall of text. I didn't want to come across as a smart-ass. I really just wanted to share my thoughts as thoroughly and conclusively as possible, because I think it's quite a captivating topic. :)

@saschathiede

Ай бұрын

@@subaruforester5062 Sure, the difference in luminous intensity would barely be noticeable, but that also means that the perceived brightness of the hotspot would be similar. The higher luminous flux of the PD36R Pro compared to the PD36R V2.0 would probably just result in a wider hotspot, maybe also more spill. And of course shorter battery life and more heat output. I think it depends if you want to compare lights with similar luminous flux or similar luminous intensity. I prefer that they chose to do the latter, because the luminous flux is strongly affected by thermal regulation, while the beam characteristic isn't. After the step-down the MH12 Pro and the PD36R Pro will have 1200 lm and just under 1000 lm respectively, while the turbo on the MH12 Pro only lasts 23 s to 30 s, about a minute on the PD36R Pro. The turbo on the PD36R V2.0 will last more than a minute, with a linear step-down to 700 lm over the course of 1 h. This means the MH12 Pro will offer 63,000 cd for 23 s to 30 s and 26,000 cd afterwards, while the PD36R Pro will offer 36,000 cd for about 1 min, followed by several minutes of a linear decline to 12,000 cd. The PD36R V2.0 starts out at 39,000 cd and holds that the longest and will reach ~16,000 cd after 1 h. In my opinion, comparing the MH12 Pro to the PD36R V2.0 is clearly the better choice, as in terms of perceived brightness, they will be equal opponents for about 30 minutes. Nonetheless, a comparison of the MH12 Pro and the PD36R Pro would also be interesting. I think it's quite fascinating how much you can tell about a lights' performance by simple physics. All three lights are made from aluminium and have similar sizes and masses, meaning their qualities as heat spreaders are comparable. The NiteLab UHi 40 LED of the MH12 Pro has the highest efficiency, allowing for the highest sustained luminous flux while under thermal regulation. Since the beam characteristic is similar to the PD36R V2.0, it is to be expected that it outperforms it in terms of brightness in the long run. The PD36R V2.0's biggest advantage is its low power consumption, as it allows the light to delay the point of crossover to around 30 minutes. The PD36R Pro seems to sit right in between in terms of luminous flux, but due to its wider beam, its sustained performance as a thrower will be inadequate. Sorry for the wall of text. I didn't want to come across as a smart-ass. I really just wanted to share my thoughts as thoroughly and conclusively as possible, because I think it's quite a captivating topic. :)