This guy has saved us a lot of time and money. Appreciate all your work.

@ProjectFarm

4 жыл бұрын

Thank you very much!

@ChrisJ-mf7cj

4 жыл бұрын

NO KIDDING! He’s actually caused me to change brands on a few things I’d used for years. It’s funny how advertisers quit marketing to people above 35 or 40, since we’ve normally found out stuff and dont change brands. WRONG! Project Farm is better than Consumer Reports to me. This is a real world test, in metrics us folk that use things actually apply things and can see things in our normal daily life.

@Alexander_l322

4 жыл бұрын

Here to find out what will stick my sisters car seat handle so it will let the seat back move so she can get in the back of her car from the passenger side as right now part of it is broken so it won’t pull the cable to release it.

@seandavis1046

4 жыл бұрын

One of the most useful channels. Thank you sir

@david4499

3 жыл бұрын

And heartache

Interesting test. A couple points to consider: This is for one specific type of plastic (nylon?) bonded to steel. There are several other types us folks who repair our own or other cars also see: styrene, polystyrene, polypropylene, various types of polyelthylene (HDPE, LDPE, PET), polyamide. Would be very interesting to see the results with each plastic type as they all have different properties. How about the plastic bonded to itself for each type, such as when the home mechanic attempts to repair a plastic part? Often this is the only recourse, as folks like myself encounter broken plastic parts and replacements are not available. I rarely need to bond plastic to metal, but plastic to itself is of great interest. I look forward to seeing such a review from you!

@ProjectFarm

2 жыл бұрын

Thanks for the suggestion.

@stevelaferney3579

2 жыл бұрын

Yes! Thanks for all you do but yeah plastic to plastic is what I need and what I usually need. Thanks again. You do us all a great service. Really.

@paddledogs

2 жыл бұрын

I was going to chime in here and say that nylon is way different from most of the plastics I deal with. It would be interesting to use non-nylon in some tests. Also plastic 2 plastic would be really interesting.

@beachbarlouie7522

2 жыл бұрын

Me too. I want to see all types of plastics bonded to others.

@tinnedanger

2 жыл бұрын

Have a look at the Sikaflex range. They produce a special adhesive for body panels and ABS

Nice review. Would of been nice to see a plastic to plastic bond. As that's what most people would use a plastic bond adhesive for.

@ACEGAMER120

4 ай бұрын

Me too but I think we can get a general idea by looking at how well the epoxies bonded to the plastic by itself

@camslides1038

3 ай бұрын

I too wish he did a plastic to plastic test

@hotboxracingable

2 ай бұрын

That's is my main need to know is the plastic to plastic for sure

@bridanjones5397

14 күн бұрын

He stated all the epoxies (except original jb weld) are designed to go from plastic to other materials.

This review saved me about $1,000! Based on your tests I got the Loctite to fix a broken door handle on a high-end GE microwave. The handle had snapped off in a weird way because the screw fittings are all plastic. I think the flex test is the one that convinced me, based on pull and shear from normal usage. Found out this is a common breakage complaint with our model. Can’t just buy the handle without taking the door entirely apart and requiring some radiation testing above my pay grade. One week after application and a 24 hour cure, and it is still holding like it was never broken! And I’m a hero in the home! Thanks again!

@onewondershow2

2 жыл бұрын

My ge microwave handle also failed and is why I'm here.

@steve.hoffman

2 жыл бұрын

@@onewondershow2 good luck! It’s still holding tight!

@stevekuxhausen7981

2 жыл бұрын

I had a similar issue with the door latch on a Kitchenaid microwave that I fixed with JB Weld, it did a super job.

@rickc303

2 жыл бұрын

Radiation testing when taking apart microwave door isn't how it works

@steve.hoffman

2 жыл бұрын

@@rickc303 I am talking about microwave leakage if the door is incorrectly resealed. The entire door assembly and internal seals to the door would have to be removed to replace the handle the way it is constructed. It’s right there in the documentation.

I'm in a real bind, broke an expensive plastic interior piece on a car... I can't tell you the feeling of happiness and relief when I see project farm did reviews on products I need. So thankful. Made my day.

@ProjectFarm

3 жыл бұрын

Glad to hear!

@BJ-fk9sq

3 ай бұрын

Was the broken piece plastic to plastic? Did you fix it?

Another unbiased no BS test. Please don't sell out. These videos are very valuable

@ProjectFarm

3 жыл бұрын

Thanks!

I wanted to see you do THIS very project and requested it in the past, so THANK YOU VERY MUCH for the incredible work you do and for always being so logical, thorough and unbiased in all of your project setups, testing protocols and final analyses! I am a huge nerd who loves to learn but does not have the means, nor your degree of expertise, to perform ALL of the various product comparisons I've always wanted to do in order to work smarter--not harder. It is for this reason that your channel and the almost unbelievable plethora of project farm head-to-head tests / comparisons make my life so much easier. Without your high integrity testing methodology and truly unbiased approach, I'd be forced to rely on far more subjective "reviews" (too many of which shill for a particular brand unbeknownst to the consumer), or I'd have to accept the fact that many of my projects would quite likely have a higher degree of inherent failures due to lack of real-world data points from which to extrapolate the BEST or MOST SUITABLE product to meet my unique needs. Again.....working smarter, rather that harder, means I don't want to have rework, especially if it occurs multiple times for something that could have been avoided had I done sufficient research or had access to the kind of unbiased, side-by-side, practical comparisons that not only provide a simple excel-type table or spreadsheet of relevant specs & data points, but I have the advantage of being able to be a fly on the wall in your shop and to soak in the knowledge as I have time and need. One great thing that I've discovered over time by watching numerous head-to-head roundups here is that in nearly every case where I've performed similar tests--often ritualistic and very OCD-like tests to help me get over my anxiety & worry of choosing the wrong product for a task--or by trial and error I've learned volumes on what DOESN'T work, I find incredible comfort and satisfaction in discovering that YOUR TESTS SO OFTEN CORRELATE WITH MY REAL-WORLD FINDINGS. That has provided me a good measure of faith & trust in my own abilities to make accurate assessments and to logically discern the critical information necessary from so much of my everyday life; whatever the days bring my way and what will be next on my list of repairs, maintenance and upgrades to home, auto & tech! I know that's a LOT to read, but it is sincere and from the heart, thus I believe it carries more weight than a mere "thank you," even if that expression of gratitude is in ALL CAPS. LOL Again....I hope it is truly fulfilling for you knowing that you help so many through your work here on the channel. I realize this is NOT easy, nor cheap to pull off. Hell, the video editing skills alone are worth their weight in gold and I wish I could pick your brain on that subject as well. Happiest holidays to you and yours. Namaste. Cheers!

@ProjectFarm

2 жыл бұрын

Thanks so much! Happy Holidays!

Am I the only 1 that walks into his shop and notices I've got the worst types on the shelf and just throw it away and buy only what I learn from this channel now!! Thanks projectfarm

@ProjectFarm

Жыл бұрын

You are welcome!

Being a do it your selfer I cant tell you how much I love these videos. Greatly appreciate all your hard work.

@ProjectFarm

3 жыл бұрын

I appreciate that!

This was a very tough test. You used nylon bolts. It is very difficult to get anything to stick to nylon. Good job as usual though.

@ProjectFarm

6 жыл бұрын

This is a great point. I plan to test plastic on plastic soon. Are there a few plastic glues or epoxies that you recommend I test? I'd like to stay with the consumer price range if possible. Most people aren't willing to spend $30+ on a plastic repair.

@blipco5

6 жыл бұрын

PF....I can't off hand think of any specific plastic epoxies but I have used JB Weld Original with fiberglass mat to join broken motorcycle plastics together with great success.

@bhartley1024

6 жыл бұрын

Project Farm could you test Devcon Plastic Welder. It must have some strong solvents in it because it sure puts off some fumes.

@jordan20146

6 жыл бұрын

Project Farm- You should try using acetone to melt abs plastic together

@lewiemcneely9143

6 жыл бұрын

......and I'm one of 'em!

Do so appreciate your taking the time and effort in testing so many products for us. I can see that you go out of your way to make these tests as accate and honest as you possibly can. THANK YOU!

@ProjectFarm

3 жыл бұрын

You are so welcome!

Amazing how much Todd's testing has improved in the last 6 years., I'd love to see this kind of test done again but with various plastic combinations

@ProjectFarm

9 ай бұрын

Thanks! Thanks for the suggestion.

@jasonpe8941

6 ай бұрын

Agreed. Plastic to plastic bonding tests would be great to see!

You have tested steel to steel , plastic to steel , BUT , have you done plastic to plastic? That is the one I'm Really curious about. ...... point out if you have done plastic to plastic , I might be over looking it. Thanks

@kkampy4052

4 жыл бұрын

He did do one where he glued pvc pipe to itself.

@nviz47

4 жыл бұрын

@@kkampy4052 hi - which video was that? (I tried to find it and didn't)

@nateb4543

4 жыл бұрын

We're curious about different types of plastics. At least the main 5 or so

@AnonYmous-qg4ph

4 жыл бұрын

@@kkampy4052 that's Construction adhesive, not plastic epoxy

@billyoung9538

4 жыл бұрын

I am also interested in the best plastic to plastic epoxy.

Original J.B. Weld never ceases to amaze. It's the only one that I have had any real experience with (once I needed something to be clear in color and tried some generic 5-min stuff other than that I think it's always been j.b. weld) and I kind of felt myself rooting for it to outperform the others. Based on my past experience & your tests I think it's safe to conclude that you can't go wrong with regular 'ole J.B. Weld.... Next they need to figure out how to make it clear in color. Then there is absolutely no use for anything else. Great video, going to save me from reading the backs of 50 different epoxy packages just to choose J.B. Weld in the end anyway because there is too many choices and variants. Plastic specific epoxy seems like a gimmick when something made for steel outperforms them on plastic. Thanks for simplifying my life just a tad bit...

@ProjectFarm

6 жыл бұрын

Thank you very much for the positive comment! All of the clear epoxies seem to have a similar smell, which is much different than the epoxies with colors. I wish they could make a JB Weld formula that was clear and as good as the original.

@animefreak5757

6 жыл бұрын

I think original JB is reinforced with tiny strands of steel, probably where most of the grey color comes from.

@Paul-pj5qu

6 жыл бұрын

Spectt84 They do now have a clear formulation. So far, so good on plastic to plastic, but it is not all that right an application I am using it for, but others did fail.

@jusb1066

6 жыл бұрын

i wonder if they could instead of using steel to reinforece jb weld, to use glass fibre? then it would be strong and clear too?

@milesabove5259

6 жыл бұрын

Honestly i think this video gives you more than whats the best single product, its more of the correct application for the specific use of the products tested. I love both loctite and jb weld, but knowing what to use in each application is the most important thing.

It makes a big difference on which type of plastic you are trying to bond with. The different polyethylene types, polypropylene, polystyrene, and PVC all need different bonding agents to make a successful plastic weld. Picking up a regular off the shelf epoxy from a hardware store is asking for bond fail. Thanks for the video!

@moderaterevolution504

9 ай бұрын

Any tips on what kind to use for a car door handle? I would be "gluing" the front plastic piece onto, another piece of 3/4 inch corner mold. I could buy the corner mold in a specific type of plastic when I go to buy it.Then the other side of the corner mold will be glued onto the part of the door handle that remains on the car. This is one of those pull upward door handles. Thanks for any ideas.

Thank you for you videos!! Whenever I want something compared Project Farms is always my go-to. Also the fact that you are replying to comments for a video that is 5 years old.....that's next level!

@ProjectFarm

Жыл бұрын

Wow, thank you!

Thanks for putting all the time and effort into these tests so we don't have to. It is impossible to tell the difference between advertising and truthful claims without real tests like these. I really like how consistent you try to keep your tests. Keep the videos coming.

@ProjectFarm

6 жыл бұрын

Thank you very much for the positive feedback!

Very interesting results, thank you for doing these videos - I've been keeping a log of the "winners (or ties)" regarding the different tests that you have done for different circumstances and it's a sincere pleasure to see the real deal without having to guess while standing in the aisles.

@ProjectFarm

3 жыл бұрын

Thanks for sharing!

I thoroughly agree with people who requested that you do this test with various kinds of plastic, not just nylon. I'm particularly interested in the best way to glue metal to expanded PVC sheets. Thanks for your very informative videos!

Great work as usual, have always been a fan and just love the consistency in the quality of your videos (the methods, tests, variants, and all around analysis)

@ProjectFarm

3 жыл бұрын

Thanks!

8 months back it was mentioned that it would be better to also test plastic to plastic. In your Super Glue testing you did test plastic to plastic using PVC pipe. It would be real interesting to see how these would do with a plastic to plastic test.

@ProjectFarm

3 жыл бұрын

Great suggestion! Thank you.

You always earn a thumbs up. The quality of your videos is amazing and it is very kind of you to use your own finances for our entertainment. Nice one.👍

@ProjectFarm

6 жыл бұрын

Thank you very much for the positive comment!

Brilliantly done, as usual. The scientific aspects you apply to all your tests is always revealing, and always makes me feel better about your results.

Speaking as a person who has actually designed research projects, I must say that your experimental designs are very well thought out! You put a lot of effort into minimizing extraneous variables. Gluing plastic is almost always problematic for me. Nylon is naturally "lubed" so especially tough. Same with polyethylene. Not much sticks to it, except labels when you want to remove them.... If I can, I will do bizarre surface preps like cutting holes or slots, sanding etc, and if using a suitable glue, I'll overglue to embed the parts in a blob of the epoxy. If faced with butt-gluing small plastic bits, I usually don't even try.

@ProjectFarm

2 жыл бұрын

Thanks!

@edwardmylnychuk5774

6 ай бұрын

yep i would agree some plastics are made so nothing sticks to them very well, using a solder gun to melt some metal to them and then glueing that would probably work

One of the most interesting channels that I watch. Thanks!!

@ProjectFarm

6 жыл бұрын

Thank you very much for the positive comment!

Great video as always. Part of the problem may lie in the type of plastic used to make those bolts. Delrin, Acetal, and Nylon 66 are examples of Copolymer and Homopolymer's that leach oils. There is a high probability that those bolts had lubricants added to them to provide lubricity to reduce friction, heat and to prevent galling when tightening on the matching nuts. These types of plastics leach oils and can prevent glues and paints from sticking to them.

@garthok1596

4 жыл бұрын

Mostly nylon might as well have been silicone.

Another well designed, objective and informative test and video. I use most of the epoxy adhesives featured in your segment and my experience with them is pretty consistent with the testing here. It’s good to see my experience replicated in a controlled comparison. Well done.

@ProjectFarm

2 жыл бұрын

Thanks!

The Loctite was quite impressive. The bolts you used are nylon, each plastic has profound differences in how they perform and react to things. Here's a tip taught to me by an old-school mold guy. Take a piece of known plastic and light it on fire (all you need is a sliver) Blow it out and sniff the smoke. NO TWO PLASTICS SMELL ALIKE and the smell is so strong you'll never forget it. All ethylene family plastics give off oils, To bond to them ya gotta remove the oils and since there's always more trying to come out it is a really improbable proposition. We used to use E-Beam Rastering to flash off the oil with some success. Some.

Anyone else find yourself watching these videos in the hardware store parking lot?

@_LVC

3 жыл бұрын

I will not confirm nor deny that I am currently sitting in a home depot parking lot

@reggin_spelt_backwards

3 жыл бұрын

bro I'm in the store....

@Kotah52

3 жыл бұрын

I had to rewatch the video on penetrating oil standing in Lowe’s 2 weeks ago.

@christophercarrillo8139

3 жыл бұрын

lmao im outside home depot rn

@itzfreakinjamie

2 жыл бұрын

Wouldn’t have it any other way. The amount of brands these days whewww

FINALLY! A very well thought out and executed demonstration (test). Super clear audio and make sense video. I like others, are awaiting your plastic to plastic tests. Great job!!

@ProjectFarm

5 жыл бұрын

Thank you!

Excellent vid. Classic Project Farm. What impresses me most is the creative way you conjure the torture tests. It allows your viewers to understand the overall quality of what your testing in many different ways. The viewer can determine what is best for their specific project. Kudos again!

@ProjectFarm

Жыл бұрын

Thanks so much!

Great test answering many questions I’ve had on plastics & epoxies. Another super job. Thanks.

@ProjectFarm

2 жыл бұрын

You are welcome!

This is so informative! I always thought that the best epoxy would simply be the best epoxy. It seems that what it is used on and how it is to be used are of equal importance. One size doesn’t fit all. Thanks, Todd!

@ProjectFarm

3 жыл бұрын

Great point!

I was getting ready to fix my the plastic gas tank on my lawn mower. I have lots of small tubes of jb weld. It's not that I intended to buy multiple tubes. It's that I cleaned up my garage recently and found them everywhere. I was going to head out and buy a tube of jb weld for plastic to add to the pile. Thanks to your test, I will just give good old gray a try.

@jessemoreno9250

2 жыл бұрын

Same here my friend when I need JB weld I just go looking around my house or garage and find plenty of tubes of it long time user of the product even used it on a engine plug on a car in 1984 sold the car 3yrs later no problem plug coming out

JB Weld PlasticBonder is actually a 2 part polyurethane. I'm watching back your older videos quite often to find references for repoairs. Thanks again.

Excellent stress test. You are the Consumer Reports of adhesive products. Its the best mechanical adhesion bond testing I've seen. Thanks so much. Keep-up the great work for us tinkerer/DIY/Maker Fair community.

@ProjectFarm

2 жыл бұрын

Thank you!

this is one of the best diy channels on KZread. Thank you for your time and energy. I hope it gets huge because People can learn a lot from these tests.

@ProjectFarm

6 жыл бұрын

Thank you very much for the positive comment!

I have never seen you test in epoxy called pc-7 Growing up in the Northeast it was our go-to product. 40 years ago I remember standing in a hardware store as a child admiring this little statue they had on the counter that was a demonstration to pc-7 strength. A bottle filled with colored liquid with nuts and bolts and golf balls glued to it he could not pull apart. we use pc-7 on a variety of projects over the years and never were disappointed. I believe it is an equal to the original JB well if not better. Maybe a showdown pc-7 vs. J-B Weld? Anyways, another great video thanks

@carlmccoy662

4 жыл бұрын

PC 7 and PC11, are great. They are more of a paste and can fill, whereas JB is a thin liquid. 11 sets up under water and is white. HIGHLY recommend

@jamesandrews8667

Ай бұрын

How about throwing 3M 5200 into one if your test for us boaters. We use it as an adhesive and as a sealer.

As usual a fantastic source of information, as most breaks in the epoxy occurred by the epoxy breaking away from the plastic bolt was there any prep cleaning of the plastic with alcohol to remove any finish, oil or grease as you did with the steel?

Another good job on the testing, JB Weld has always been my go to for epoxy. Nice to know I was right at least once in my life.

Definitely earned a thumbs up. I agree that it is hard to have a definite winner in this competition. I think we are all fans of JB Weld original.

@ProjectFarm

2 жыл бұрын

Thank you very much!

Thank you all for continuing to provide future video ideas! Here are the links to the products tested in the video. Highly recommend shopping around for the best price. Best regards, Todd Gorilla Clear Weld: amzn.to/2Ynh3AX JB Weld Original: amzn.to/3j2SlxO JB Weld Plastic Bonder: amzn.to/3jaihHJ Loctite Ultra Gel Control: amzn.to/3hmyk4Z Super Glue Plastic Fusion: amzn.to/32kp5vR

@topherteardowns4679

Жыл бұрын

it would be great if you tested how well they bonded to one another, and then done the subsequent tests. Id love to see gorilla on the bolt and jb weld on the metal. There is a dozen variables you could explore, regarding the curing times and which is bonding to which, etc.. love your channel. top notch!

@kkepdawg1

10 ай бұрын

I was watching super glue and mixing baking soda with it. Even ash's and super glue. Amazing results! So what super glue mixes with a control using different ash/soda's. Strongest to hold weight, how they cut, sand. The other variable is using release agents. I have seen grease, wd-40, motor oil, or aluminum tape and masking tape. Long time sub. Hope you at least see this??

@Mattlawton-ft6ew

10 ай бұрын

Try 3m scotch weld 👍

@DirtyRhodesMotorsports

4 ай бұрын

Can we recreate this test? Maybe test to see how they do when they are below freezing temperatures. Test when they are welded to themselves. Or any other test that you can think of.

I've been watching your videos for quite some time. I appreciate you being unbiased and your "matter of fact" approach.

@ProjectFarm

3 жыл бұрын

Awesome, thank you!

I appreciate all the time, energy, and money that you invest to make all these excellent videos. I have been following you (as a subscriber) for several years. So far, it's clear to me that you do the best job of honest evaluations / comparisons of various products, you provide valuable information in doing so. Thank you, and keep em coming!

@ProjectFarm

Жыл бұрын

Thanks and you are welcome!

Great videos, this channel should have 1 mil

@ProjectFarm

6 жыл бұрын

Thank you very much for the positive comment!

First time on your channel and I love how thorough you are! However, I think it would have been good to test how much strength each had when being pulled directly away from the point of contact. I found this video because the door handle to my oven got yanked out and the housing holding the screws got stripped, and I wanted to see what product would be best to use. Thanks for the info!

What a crazy test because I tried J-B weld original to fix the top corner of a plastic radiator and it cracked again. After cleaning and sanding again, I used super glue and baking soda on the radiator on day two and the radiator did not crack on the way home from work this time.

I greatly appreciate the amount of time, hard work, and science that is put into your videos! Thank you Project Farm!

@ProjectFarm

2 жыл бұрын

You are welcome!

I know this is somewhat old either way I’d love to see a replay with new contenders with some of the newer epoxies. I’d even be willing to send you a couple of them to test myself. I also have a few other ideas that maybe we could discuss. Especially with the tool and hardware market getting a bit of a shake up as things are coming out everyday now that COVID has left many people at home to invent new things and they are starting to hit the market.

Sorry if I missed it, but what was the plastic bolt made of? Was it polyethylene or Polypropylene, Nylon, etc.

@Allazander

Жыл бұрын

I don't think he said, I watched the beginning again and the text just said "plastic bolts". It's a great question though, especially since some plastics are harder to glue and are more chemically resistant. I'd be interested in the answer.

You’re in a league of your own. One of the best channels on KZread. Thank you for all the testing that you do, to help us out everyday, everywhere.

@ProjectFarm

2 жыл бұрын

Thanks! Glad I can help!

Haven't seen one of your videos I didn't like or made a big difference in what I buy thank you !! Awesome

Love these videos! You should get an engine and leave on only the metal parts and put it in a bonfire overnight to simulate being in a house/garage/structure/forest fire and then build the engine so u can run it and see what effects those temperatures would have on the whole engine to show what would happen and what part would fail first (if any) if someone tried to rebuild an engine that was in their home/garage when it burns down.

@ProjectFarm

6 жыл бұрын

Thank you for this video project idea!

@craiggarrett2603

6 жыл бұрын

Project Farm hope it's possible!

Have you ever tested rapid fix 2 part adhesive. curious how that holds up.

@riccocool

2 жыл бұрын

Slower adhesive is always better adhesive.

Over 4 years of work you have really polished your videos. Outstanding job!

@ProjectFarm

2 жыл бұрын

Thanks!

I've only used epoxy resin to stick a car number plate back on- yet I found this video interesting, informative and entertaining. Thanks for engaging my brain

Early this time around. I would like to see a plastic to plastic styled test. @Project Farm

@ProjectFarm

6 жыл бұрын

Thank you for this recommendation!

@JONNYGEEKMANG

6 жыл бұрын

As always good Job. Keep it up.

@dpunched8104

6 жыл бұрын

could you do this same test with something other than a nylon bolt maybe abs or some other plastic from personal experience not much likes to stick to nylon

@waynehullihen3066

6 жыл бұрын

I was thinking the same. Plastic to plastic and different plastics.

@dewainanderson8088

6 жыл бұрын

Use polyethylene instead of nylon

Well thought-out demonstration. Love the summary table.

@ProjectFarm

4 жыл бұрын

Thank you!!

I love how you make sure the experiment stays controlled only testing the independent variable, great job.

@ProjectFarm

2 жыл бұрын

Thanks! Happy New Year!

I was literally at the store at staring at locktight not sure if I should get it cuz I never heard of the brand. I got JB Weld instead. I’m considering getting locktight next. Thank you for putting the time & effort to making this video. It’s was very enjoyable to watch

@ProjectFarm

Жыл бұрын

Thanks and you are welcome!

be better to test plastic to plastic strength

@ProjectFarm

4 жыл бұрын

Thanks for the feedback.

@kellyvcraig

3 жыл бұрын

Would be an interesting test, though we use what might be better called a solvent for such things, such as WeldOn 4. In the end, using it, two pieces look like one and are welded together.

@brentonglover1418

3 жыл бұрын

That would be awesome and helpful knowledge to know

@ADefenestrator

3 жыл бұрын

In some ways not as interesting, since same-plastic can be welded. Finding something that'll bond it to metal is much trickier.

@user-qz6ix7od3b

3 жыл бұрын

@@ADefenestrator but interestingly enough all over the internet you see mainly people trying to glue broken plastic parts back together and having very low success rate. welding doesn't really help if you don't have the same material to use as a filler to weld the 2 broken parts, because if you weld plastic you melt a lot of it on the contact, and where you can't spare those 1-2mm of material to melt away.....you are just stuck(and not in the good bond success way :) ). and most people just have problems gluing plastic to plastic, so i'd say this would be even more interesting than just trying plastic to metal or other materials. you can clearly see also in this video that it's the plastic which presents issues for all glues to bond to it

I really appreciate the time, money and effort you put into your experiments. You help a lot of people out. Nice job man 👌 thank you.

@ProjectFarm

3 жыл бұрын

Glad to help!

I really appreciate your channel and have told many people about you. Having said that i was wondering what about plastic to plastic which i think is more what i have needed.

@ProjectFarm

Ай бұрын

Thanks! Thanks for the suggestion.

Great Video. I'm working on my 98 Goldwing with a side cover that has a broken plastic tab. I've super glued it twice which has failed and now need a stonger bonding epoxy.

@ProjectFarm

Жыл бұрын

Thanks! Thanks for sharing.

Also, I would recommend plastic to plastic tests with varying types of plastic.

@ProjectFarm

6 жыл бұрын

Thank you for this recommendation!

Can you test threadlockers such as loctite and jb weld etc. and see if the work and wich works better? You can tight the bolts with the torque wrench using threadlocker and then mesure the torque required to loosen them .

@ProjectFarm

6 жыл бұрын

Teo, Yes, I plan to test threadlockers very soon. Thank you very much for this recommendation!

@bhartley1024

6 жыл бұрын

I once used regular superglue one some bolts holding a pull starter on portable generator. When I had to remove them later the bolts wrung off with the nuts still glued on.

@animefreak5757

6 жыл бұрын

i'm sure there will be some variability, but most strong threadlockers require heat to loosen (without heat you can literally twist the head off the bolt) It might be interesting to know the strongest that is still removable without heat though.

@otm646

6 жыл бұрын

In the fastener of testing industry what you're talking about is a very common test. All you need is a clean degreased nut. Run the nut fully into the thread locker, let it cure, then measure peak removal torque.

@jacobmello5126

6 жыл бұрын

The engineering company develops and produces precision testing equipment, the most common one we make is for torque measuring. The torque measuring system is most often used by beverage and pharmaceutical companies for testing cap install and removal torque but the system is very adaptable for measuring torque on just about any application, its an extremely precise and repeatable tester, I bet that it could even be used for the common test you mentioned otm646

What a great channel! Thank you so much for your work. Really appreciate the transparency and care that goes into fair testing and acknowledging limitations. Are you aware of any tests of similar plastic bonding products under stresses of water and high heat I.e. for mending dishwasher parts? Thank you!

@ProjectFarm

Жыл бұрын

Thanks and you are welcome! Thanks for the suggestion.

great video / experiment. You really did your best to isolate variables as much as possible and test different attributes.

@ProjectFarm

2 жыл бұрын

Thanks!

Love your vids! I'd also like to see plastic-to-plastic, specifically ABS. I'm guessing those bolts were nylon? Nylon is more resistant to solvents than ABS, so these epoxies may perform better with ABS. Majority of the time, when I need an epoxy, it's to glue back a mounting tab, joint, or bracket that busted off some ABS plastic snap-fit thing. Lately, I've been repairing broken plastic things with LOCTITE 11C Hysol instead of my regular go-to, JB Weld. I'm curious how it compares.

@Pokka676

2 жыл бұрын

Exactly. test failed. trying to find out the best plastic epoxy but proceeded with a metal base frame.

@dmo848

2 жыл бұрын

Try 2 part plumbing glue. Or straight up black abs glue for putting together pipes. I've used it and it has never ever broke

Revisit this one please now that you have better test methods.

Very thoroughly tested. Thanks for helping us close the best products!

@ProjectFarm

2 жыл бұрын

You are welcome!

I know that you put a lot of time in all of your videos. We really appreciate your work and Thorough testing

@ProjectFarm

2 жыл бұрын

Thanks so much!

how often would a person have need to glue plastic to steel? more of a case or need to bond plastic to MORE PLASTIC of the same nature unto (on onto) itself me thinks.

@ProjectFarm

6 жыл бұрын

All great points. Thanks for commenting.

@Ricopolico

6 жыл бұрын

I agree with you, J.P.

@kumd

6 жыл бұрын

Came across this video for this exact reason. Broke an RC helicopter landing gear leg and was curious what the best plastic to plastic adhesive was. Still a great video though! Would have liked to see Devcon plastic steel too although. 👍👍

@Ricopolico

6 жыл бұрын

The best for plastic-to-plastic WAS Devcon MVP 33. It was so good, they stopped making it. The next best was Devcon Plastic Welder. ALL the other so called "plastic welders" are not nearly as good. These conclusions result from trying many products over many years. "Crazy glues" might grip great at first, but, in my experience, they do not hold up over time.

@valeniusthekat

6 жыл бұрын

Voodoo Ranger 🍻👍😄

Use a high temp cooking oil as a replacement for motor oil.

@ProjectFarm

6 жыл бұрын

This is a great suggestion. I'll test this soon!

@JRobert111111

6 жыл бұрын

Cooking oil won't work as it, along with non-stick sprays only work to prevent the food from sticking to the pan. If these products are used in a "friction" type function, it turns into a very sticky glue like substance and would lock any engine up very quickly. I know this as I used to repair a lot of food preparation equipment and many folks would use cooking oil or Pam to lube something like the slide rods in something like a meat slicer. Then when the whole assembly became a solid mass, they were shocked at the expense as this crap has to be scraped off with a razor blade, then a wire wheel on a bench grinder and then still cleaned with solvent to make it usable again. I also learned at a young age about this when I had one of those neat Visible V8 engine models with the electric motor in the starter housing and the distributor actually worked turning on lights where the spark plugs were. The instructions said to use cooking oil to lube the cylinders. Needless to say, my model totally froze up quite quickly. If I get my hands on another one of these exact models (not the hand crank one), I now know better to use mineral oil, or the food machine oil which I still have plenty of. Just my 2 dollars worth.

@jinno11

6 жыл бұрын

JRobert111111 worth a try & see in action!

@jinno11

6 жыл бұрын

Project Farm look forward to it mate! Viewer from Australia here bud!

This is 5 years old! You've come so far since then. I can only imagine what testing you would do now 10 different epoxies 😆. Even these early videos were fantastic and very informative. Thank you for all you do Cheers 🥂

@ProjectFarm

Жыл бұрын

Thanks!

@pyrocat1150

Жыл бұрын

@@ProjectFarm You should see if there is a glue that will stick to polyethylene plastic. (Irrigation line) or kraft tube caps. Only thing ive found that works is amazing good cured for a few days.

Always good to know what strength any plastic weld glue/epoxy will do . I am looking at getting my shattered Toyota bumper back to the original shape without spending 800.00 on a replacement when 3/4's of the bumper is just fine! However I would like to sse plastic to plastic vs what you have shown here.

you're getting pretty good at this, thanks for sharing.

@ProjectFarm

6 жыл бұрын

Thank you very much for the positive feedback!

10:37 For anyone needing a quick reference of his findings.

@ProjectFarm

5 жыл бұрын

Thanks for watching!

@JimmyCasket02

4 жыл бұрын

Grizzleback07 kind of defeats the purpose of this video

@zw5509

4 жыл бұрын

@@ProjectFarm Time to test Plast -Aid I think!

@Khorne_of_the_Hill

4 жыл бұрын

@@JimmyCasket02 not really. I'm not a big diy person, and I have no immediate intention of purchasing any of the stuff he tested, but i've been binging his vids for 2 days now lol

@daviddoesit2341

3 жыл бұрын

Thank god

I have tried to use these products for these type applications. The tests were enlightening. Excellent presentation!

@ProjectFarm

2 жыл бұрын

Thanks so much!

As a truck driver, I have a standard kit of adhesives I cannot go on the road without. 1) JB Weld heave duty epoxy (2 tube set) 2) Gorilla Tape black extra wide, white standard width 3) Zip ties of multiple sizes I constantly utilize all 3 regularly!

@ProjectFarm

5 ай бұрын

Thanks for sharing.

@fobbitoperator3620

5 ай бұрын

@@ProjectFarm Of coarse, & I liked your QC test!

Does adding sawdust or metal powder to epoxy help? I’ve seen forged in fire contestants do this a few times and science doesn’t seem to support it.

@tinymints3134

2 жыл бұрын

Adding particulates to a matrix substrate can affect its behavior. But not surw in what way

As always, a great 👍 sir. I’m always amazed at how much I can learn by watching your videos. I always wished my high school had some type of shop class, which it didn’t. If it did, you would have been the best teacher a young person could ever ask for! My friend, God bless you and yours! Stay safe and healthy and keep these awesome videos coming our way 😃

@ProjectFarm

2 жыл бұрын

You are welcome!

Thank you brother. Whenever I'm need something to repair stuff I come to your channel. Beautiful truth. Thank you. I need epoxy the thin plastic Inside fridge was iced so I stabbed it off and poked small tear inside fridge wall. It's plastic. Now ice builds up where I poked hhole. Simple fix. Epoxy the wounds. Beautiful work you do here.

@ProjectFarm

11 ай бұрын

You are welcome! Thanks for sharing.

The comparison between static strength and impact strength in cantilevered beam configuration (should initiate failure in tension at the top of the interface) versus torque (should initiate failure in shear at the OD of the interface) is very helpful in understanding the limits of these adhesives. Also, I'm glad to see you scuffed the plastic first, so many people overlook the importance of surface texture when applying adhesives. Great work, thank you! If you ever do a follow-up to this video, I'd love to see two combinations: 3M Scotch-Weld AC77 primer and Scotch-Weld PR100 adhesive, versus Permabond POP primer and Permabond 735 adhesive.

@ProjectFarm

Жыл бұрын

Thanks! Thanks for the suggestion.

You should compare different types of penetrating oil such as PB blaster and liquid wrench. To see which one works best on rusted nuts and bolts.

@ProjectFarm

6 жыл бұрын

This is a great suggestion--thanks!

@siggyincr7447

6 жыл бұрын

Project Farm+ if you do a penetrating oil test please include a popular home brew that is supposedly better than all the commercial ones, half ATF + half Acetone shaken well before application.

@EGGINFOOLS

6 жыл бұрын

Siggy in CR Yes. I use this all the time. I will never buy commercial penetrating liquid again.

@jaketaylor8213

6 жыл бұрын

Dont forget kroil thats some amazing stuff

@johnsmert3361

6 жыл бұрын

Aaron Kirchner PB blaster is awesome it does blow rust right off of stuff

JB Weld again, and again, my favorite part about JB Weld is the two tubes. It's so easy for a single tube adhesive to gum up at the opening of the tube. I do wonder if the dual syringe design would be good against clogs for the kind of person that only needs a good, occasional adhesive. That being said, I'll probably stick with JB Weld as the default

@ProjectFarm

5 жыл бұрын

Thank you!

@Bloodcurling

3 жыл бұрын

I just bought some. The syringe is only .85oz, the dual tube is 2oz total. It's double the price for the convenience.

Just ran across this. Ingenious, I'm glad someone took the time to test. Thanks!

@ProjectFarm

2 жыл бұрын

You are welcome!

Hi, I just wanted to add to the comments requesting/suggesting plastic to plastic epoxy/glue/mending tests. I read a comment and agree, that nylon might not be the best representative, especially to metal. I'd like to see it done with abs, pvc, and maybe some other common plastics. I think most people are looking to repair a broken or cracked plastic part or piece of something and it's a very tricky thing. I need to fix an oscillating fan part. It's the piece that allows the fan head assembly to pivot/click up and down to various positions, and the power cord goes through this piece. It's cracked in half ("cleanly" but not "straight, if that makes sense). Anyway, I'd pay $30+ ($150 cad that is) to get a good fix, because I can't find more of the fan and it's really good. Thanks again for your time and efforts. Much appreciated.

@ProjectFarm

2 жыл бұрын

Thanks for the video idea.

What kind of plastic are these bolt made of? (Does the bonding efficiency change with the plastic type?)

@jasexavier

3 жыл бұрын

They bolts are likely nylon (polyamide 6); it's by far the most common material for plastic fasteners. The type of plastic will make a huge difference. Nylon is fairly difficult to bond, whereas something like acrylic is easy, and polyethylene is essentially impossible. Fusion type adhesives will partially dissolve plastics like acrylic, PVC, or ABS, creating a much stronger bond. Nylon will not be effected by the solvents and so won't form that interlocking bond. Very inert plastics like polyethylene or polypropylene required highly specialized, and usually quite nasty, adhesives and never really form strong bonds. They are best thermally welded, or mechanically fastened.

You sir. Have earned a new sub! Keep it up! Dont get hollywood on us when you get more famous :)

@ProjectFarm

6 жыл бұрын

Jonathan, thank you very much for subscribing and for the positive comment!

@serenityprojects7364

5 жыл бұрын

These are the comments that we need on here. I also wanted to add that every time that you tried a new Technique I was asking myself what would happen if? Then you tried it. I feel confident that you covered everything. Good job and thank you!

It’s almost as if he knows exactly the test I need for my projects. Saved money sure but more importantly it saved me time. Thank you!🙏🙏🙏

@ProjectFarm

2 жыл бұрын

You are welcome! Glad to hear!

Thank you very much sir, I watch all off your videos, very accurate content, from Trinidad.

looks like you need to choose the right epoxy for the right type of application. Good information here.

@ProjectFarm

6 жыл бұрын

Thank you very much for the positive comment!

Which epoxy works best as motor oil?

@ProjectFarm

5 жыл бұрын

Thank you for the video idea!

@tomasnokechtesledger1786

4 жыл бұрын

Actually they use the epoxy curing agent as additives: engine oil dispersant and oil detergent.

This channel maybe the best side by side comparison channels ever!! Thanks!!!

@ProjectFarm

8 ай бұрын

Thanks and you are welcome!

@ridingvenus

8 ай бұрын

@@ProjectFarm did you do a plastic welding plastic video in a similar way as this video? Difficult to find such good content anywhere.

I love how you have a video on everything. I find myself coming to your channel before I buy anything!

@ProjectFarm

2 жыл бұрын

Thank you!

The world can't thank you enough for these vids

@ProjectFarm

3 жыл бұрын

That is so kind!

There was a Loctite ad before this video LOL ps. Mower man is new for Peter Thompson

@ProjectFarm

6 жыл бұрын

LOL! Thanks for commenting.

Another great vid. Hope you do plastic to plastic epoxy/glue tests as I have to fix my bumper soon!

@ProjectFarm

10 ай бұрын

Thanks! Thanks for the suggestion.

It’s not an epoxy, but I have had great success adhering metal to plastic using E6000. It is flexible, strong, sets quickly, resists high ambient temperatures, and dries clear. Kudos for such an amazing channel!

@ProjectFarm

2 жыл бұрын

Thanks! Thanks for the feedback.