"Carrying on with the cheese analogy, this is like, uh, a diamond."

@philmccuen

7 жыл бұрын

I gotta try that cheese

@dccol

7 жыл бұрын

This made me clap and laugh which scared the doggo.

@anthonyellis519

7 жыл бұрын

that had me cry laughing. lolololol

@billcodey1430

7 жыл бұрын

I stopped the vid and backed it up to make sure I heard it right. What a hoot.

@EtaCarinae230

7 жыл бұрын

diamond or 90 months old Parmigiano Reggiano ;)

I do contract work in a tree carcuss processing mill. It's definitely not for the faint of heart. In fact, if vegetarians saw what they did to those poor trees they would probably start eating meat.

@robertthomas5906

3 жыл бұрын

It's sometimes hilarious to talk to people that won't eat something. Sometimes you'll get a hell of a story.

@BusinessWolf1

3 жыл бұрын

@@robertthomas5906 Oh, yeah! By the way, if you order from KFC don't order the salty stuff , order the spicy stuff. The salty things get ordered about half as much as the spicy so there's way bigger of a chance to get bad meat. I worked there for 3 months and was one of their most reliable guys.

@robertthomas5906

3 жыл бұрын

@@BusinessWolf1 Ugh. KFC. I complained about my last visit there. They offered me a free meal. To me that's about what it's worth - nothing. I have a feeling they had no clue what they were doing. Probably shouldn't have been open.

@BusinessWolf1

3 жыл бұрын

@@robertthomas5906 What? KFC is healthier than mcdonald's and other shitty fast food.

@bunzeebear2973

2 жыл бұрын

@@BusinessWolf1 Well "at least healthier than shitty food in taste"

" carrying on with the cheese analogy.. this is a diamond" lol

I just spent a week in Canada for work, and not a single person talked like you. so dissapointed.

@ddoood

5 жыл бұрын

keith dalton I’ve lived in Canada my entire life never heard someone talk like this either till Alberta

@glenholmgren1218

4 жыл бұрын

duncan verm Well, my Dad, RIP, and all my uncles talked like that constantly. They all worked on a market farm and in the bush in work camps - much like AvE and the boys in the patch. That’s where a lot of this comes from ... self taught men.

@bobprivate8575

4 жыл бұрын

Only the married ones talk like him.

@GordieGii

3 жыл бұрын

I'm from Canada and I have met a few people who talk like this (sounds mostly like Maritimes to me), but lots who don't. Canada is a big country with lots of different accents, just like 'Murica. Compare Massachusetts, Virginia, Louisiana, Texas and Wisconsin. What part of Canada did you visit? Torontonians (people from T'ron'o) tend to sound like upstate New York. (esp. Buffalo) Prairie provinces tend to sound like North-West states. Quebec and North-East Ontario have lots of different influences. Canadians do NOT say 'aboot.' We say 'abowt' while 'Muricans say 'abauht.'

@KTSLAY

3 жыл бұрын

Watch the letterkenny.

Almost broke my nose one time when using a twist drill bit & battery powered drill to make a 1/2" hole in schedule 80 PVC pipe. I was standing on a stool and operating the drill face adjacent when drilling my hole straight down from the 12 o'clock pos on the pipe. I was holding the drill in an awkward but stable way until that 1/2" drill bit BIT into the PVC. The drill spun, broke free of my tentative grip, rotated a quick 270+ degrees and the battery pack of the cordless drill clipped my nose as it spun. I was bleeding a little and had a swollen nose but really It had the same impact as getting hit in the balls by a toddler with a wiffle bat. No long term damage but lesson facking learned!

"carrying on with the cheese analogy this is like uhhh.... Diamond" 10/10 Would eat cheese with you anytime.

I just love your malanguage and straight forward common sense. Oil makes smoke, twist drills are cheap, time is expensive. Good speech sir!.

9:37 -- "...and the reason is because Aluminum -- RATHER, Aluminium...." -- *LULZ* *Aluminiumati Confirmed.*

Mostly I'm in it for the word salad, but this was highly educational. Great vidjeo!

@cmans79tr7

7 жыл бұрын

I, too, listen for similar reason. I also noticed he snuck in the "correct" pronunciation of the US State of Missouri. "Correct" meaning how Missourians pronounce their own State name, not necessarily how I pronounce it.

@NOOOOOOO0OOOOO

7 жыл бұрын

+cmans79tr7 I'm from Missouri and everyone in my general location pronounces it much like misery. I'm from the southwest part of the state btw.

@cyclomo_

7 жыл бұрын

I'm in Missouri and the only people who say Missoura are morons and politicians that are pandering to said morons.

@NOOOOOOO0OOOOO

7 жыл бұрын

+Andy Schuette Exactly what this guy just said!

@disastranagant

7 жыл бұрын

Muhzurruh is more of a north/middle rural thing. I'm in Saline County and it's pretty much a town/country split here.

"Carrying on with the cheese analogy, this is.. Umm.. Diamond" I love your channel, AvE. 😂😂😂😂😂

AvE, have you thought about publishing some kind of dictionary or glossary for all of your technical jargon?

@donniemiles8982

5 жыл бұрын

that's a good fuckin idea

@jamescline2726

5 жыл бұрын

I thought the same thing.

@ElTiBo44

5 жыл бұрын

Goyabee you just tripped my tripper switch! I was thinking that exact same thing 30 seconds before I read your reply!

@pbgd3

5 жыл бұрын

@@ElTiBo44 this is his published würks

@johnathonkuhn7731

5 жыл бұрын

goyabee he could be a writer for Letterkenny. Or a character. Tool store guy or something.

If I ever talk in a manner half as interesting as this guy, my life will be a success

Hello my name is Simon and I'm a woodworker. It's been 2 days since I last worked with my wood.

"on the cheese scale this is a diamond" HAHAHA I love this guy

"Carrying on with the cheese analogy, this is diamond"

Being able to PROPERLY sharpen a drill bit is a lost art.

@moahs5682

4 жыл бұрын

Drill Doctor

@ThumbDr

4 жыл бұрын

MOAHS lmao good joke.

@realpatriot5896

4 жыл бұрын

Thanks but I am not learning anything this time. I have many years of experience.

@ashleylawrence2110

4 жыл бұрын

R/I'mverysmart

@schamberlain1

3 жыл бұрын

I was taught while I worked at a machine shop by the old man who owned the place. I'm the only person I know that can do it. Oh yeah, don't forget the cup of water and dress that wheel up before you start.

should be required viewing for all shop classes.. sending this to my sons right now... Thanks muchly...

Wow, that was like a feature length documentary! I think we got more than just the tip this time.

I feel like your shop is worth more than my Eastern European self will make in my life

@goonridingupnorth1382

6 жыл бұрын

If that thought is in your head then yes, yes it is😂

That part in the End is so true. Fresh from school, university or college and the little shit is trying to tell yeah what to do by the book. Love that. Ofcourse I use Tables, Formula and so forth. But they are only guidelines and not the rule. If you have experience, know your tools and material, then you will quickly find out how to compensate for variables. I was once turning a precision piece for a hydraulic actuator and my lathe settings wasn't quite like in the book. It was running quite fast but the feed speed was lower. Why? Well the Material was not ordinary brass and I wanted to make a quite tight tolerance with a fine surface so that the boring process wouldn't take so long and the tool wouldn't have to work that hard. (The tool wasn't great so I had to be careful. EXPERIENCE!) After Lunch I came back to the machine and the settings where all fucked, as well as the the piece I made. What happened? Our new Bimbo McCuntfart of the Engineering and Repair Department who freshly graduated from Asshole University of Cocksuckerton figured he could have a go and finish my piece. 3 hours of work fucked up with chatter marks and hole that was too deep. It was a very complex valve piece. And since we don't have a CNC Machine, it was all done by hand... That Fucker even had the arrogance of handing me the piece and telling me it was my fault. "If you would have used the right settings beforehand, it wouldn't be ruined." I took my protocol, checked the settings on the lathe and saw that everything was screwed with. I asked my boss too take a look. His head turned red and he crumbled the copy of my protocol He then turned to Engineer and said in German "If you want to keep your job, get out of the maintenance shop." And flicked the paper in his face... Anyway. For the fresh guys out there: Don't fuck around with other people or their stuff and don't tell a experienced worker how to work. WE KNOW WHAT WE ARE DOING....

@ZeroMass

5 жыл бұрын

I like the part where you got abducted by aliens.

@dannydetonator

5 жыл бұрын

OK. Reason why i 'borrow' my regimes & settings from experienced, not from the books. I never had technical education though

@Conservator.

4 жыл бұрын

MrJizzy181 Just an armchair warrior here, so no experience whatsoever but I must say you are very convincing. 😄

@____MC____

3 жыл бұрын

PREACH IT!!!

I have an obscene infatuation with tree carcasses

@mcremona

7 жыл бұрын

AvE what if I have no interest in recovery?

@locomike102

7 жыл бұрын

Buy a welder. The rest will sort itself out.

@trentw26

7 жыл бұрын

What if I have an obscene infatuation with watching people who themselves have a obscene infatuation with dead tree carcasses. Dear lord..., I wonder what webMD has to say about this.

@mcremona

7 жыл бұрын

Michael Wheeler that only made it worse. Much much worse

@mcremona

7 жыл бұрын

Trent Wainwright hahahaha!

Hey, some of us "smokers" might enjoy the smell of burning sulfur in the shop! 😜 Use a pilot hole?? Well damn, I must have been doing it wrong this whole time! Common chisel points..... don't fail me now!!

@alexwood99

3 жыл бұрын

What about spur point bits

I can listen to you for hours. :-) "Work like a trained toilet........" Nearly spit my coffee.

Supercool video! One of the BEST and most useful episodes! All the knowledge and little things in one package. Awesome! Thanx for all the knowledge and the most attractive way of presenting it and for the narration. My grandfather, a machine-building-engineer with a lot of different education and experience taught me a lot of things about mechanics in a workshop but Ifelt like I missed some little things in my knowledge about drill bits. This video filled these gaps perfectly. You're a good teacher, AvE!

"This automatic center punch is one handed." Proceeds to use 2 hands 😂😂😂😂

@kylelikeskjvbible

4 жыл бұрын

nothing wrong with using two hands...as long as you can.

More expensive = more better!

@rihardsrozans6920

7 жыл бұрын

Most bestest!

@crimf4115

7 жыл бұрын

Didn't you watch the Festool BOLTR?

@DigBipper188

7 жыл бұрын

Unless you're talking Festool...

@deadbolt9019

7 жыл бұрын

Not skookum

@nenben8759

7 жыл бұрын

milfukee hand drill has pretty mediocre preformation, but so to most hand drills. milfukee ain't the cheepest

i only have started watching your channel recently, but i really love your videos! the depth on how you go in to the machinary and all that stuff,you teach people every minute. cant say nothing less than i love it!

Chopping holes in cabinets and furniture for 40 years, I've found that using just a slight "wallering" action with the hole-saws really helps to evacuate the crud. This also allows the cutout to fall from the hole-saw with a quick tap in reverse.

LOVE the humor side of this, VERY funny and still very educational. "continuing with the cheese analogy, this is like... .... ..... .... Diamond" "Chinesium" material "I like to polish my tool like the next man"

I like to strap those hole saws on an angle grinder. Usually more torque than a drill and more stable with the extra handle.

@andynz7

4 жыл бұрын

That's genius!

@garethbaus5471

4 жыл бұрын

Sounds like fun.

@cm01

4 жыл бұрын

Milwuakee's hole hog is that same concept

@lornatonack2514

Жыл бұрын

Sounds sketchy as frig

I realized this is a 30 minute long video after watching for 25 minutes.

@BusinessWolf1

3 жыл бұрын

35, actually

i actually didnt know a whole lot about drill types before this. for me it was just "works with wood" and "works with metal and wood", then sometimes "that didnt work". thanks for the informative video :D

One of the funniest comment riddled segments I have seen Hilarious and informative.

I wear my safety glasses on top of my head. then when I see the clip board warrior I just flick them on real quick

*Ice in an empty glass sound* "Excuse me, my rum and coke is broken"

Excuse me ...... (3 seconds later) "My Rum and Coke is broken" .... Cheese reference starts at 12.10 - You my friend are Bloody Brilliant.

@joshlong1397

5 жыл бұрын

I was just rewatching to send my friend the cheese analogy, thanks for the the info! (I still laughed out loud enough to stir the misses the 2nd go around)

I am a j-man tree carcass shaper, but I have moved up to millwright apprentice... I learned that manipulating tree carcass es was wrong.... the best part is I work at a brewery...

@jonanderson5137

7 жыл бұрын

Turning absolutely useless grass into liquid ambrosia. Science!

@imabeapirate

6 жыл бұрын

So basically some guy is always holding your beer

Which drill bit is best drill bit

@kumaclimber

7 жыл бұрын

Regular car reference?

@pjbth

7 жыл бұрын

you better believe it

@mattloomis1685

7 жыл бұрын

Pat Booth my drill bit is best drill bit because full of shmoo

@kumaclimber

7 жыл бұрын

My drill bit is best drill bit because tungsten carbide gets me hard.

@RichardWeapons

7 жыл бұрын

I think we all just became best friends.

16:14 - "if you're that small, you can hand-drill" 17:15 - "they're soft down here and hard up there" This vid is a gold mine... X)

this video led me down the gullet vs material rabbithole and helped alleviate a massive blindspot in my working knowledge, thank you AvE. once again youve helped me in my battle with my own empire of dirt!

You REALLY want to know about drills if you watch a 35 minutes video about it... I did :)

@bradbauman7594

4 жыл бұрын

And it doesn't even seem that long!

@eejuice

4 жыл бұрын

I DO know about drills, but I couldn't stop watching.

@wakeupmofoers691

3 жыл бұрын

nevermind all the biology and sex ed included lol....

that cheap drill index case - usually one of the twist drills has fallen down off the little ledge that holds them at the right height - when the ass end pokes down the index and case won't fold. Drives me nuts every time.

I've got 2 sets of Wentworth bits, and taps, dad bought them from a Norton dealer in 1974. We have built 21 bikes, I finished the last one when he was injured. You two woulda been a riot to share the shop with

Just to be that guy; brassing off a drill bit is not just dulling the edge, you’re actually changing the cutting geometry. You’re aiming to create a small flat on the cutting edge which is 90 degrees to the work. Also called neutral rake.

"It's even legal now in Missouri, who am I to judge?" Best quote ever.

@SomeoneVx

4 жыл бұрын

Born and raised in Missouri. But what does this saying mean??

@ucitymetalhead

4 жыл бұрын

@@SomeoneVx kinda wondering that myself as a fellow Missourian.

"These things work like a train toilet" Did you just anglicize a Finnish saying?

Refreshing to hear a voice of experience and hardened knowledge vs a “google expert” and what a great sense of humour to boot! I envy this guy.

I can imagine your video skyrocketing in popularity if you just edit them with soundboard music it will amplify your humor

Cobalt drills are great for harder steels without the cost of carbide. Carbide drills are only really useful for making tons of parts in a cnc where you can dial in the speeds and feeds, because they are picky about settings. They last way longer but you gotta justify the cost by making lots of holes with the settings dialed. They can cut way faster too.

I am upset you didn't use the Metabo with the nail in the first bit just to taunt people more.

dont ever change the way you speak in these videos its awesome and hilarious your content is phenomenal my friend!!!!

Another way to evacuate chips using a hole saw is to mark the circumference of the blade and drill a couple holes on the inside of the cut to allow chip evacuation. That brace bit we call augers here in Scotland

Carrying on with the cheese analogy...."Diamond" HAHHAHA

The technical term for the Aluminum Oxide layer corrosion stoppification is "Passivation". What for impressin' the ladies with the linguistics.

@cameronsmith3988

7 жыл бұрын

Edited because of the brilliant feature auto-incorrect. It saves you time by making sure you're wrong every other time.

@timlaunyc

7 жыл бұрын

I would rather use oxide layer to get her in the layin' mood. Especially chickens, if you want eggs.

@cameronsmith3988

7 жыл бұрын

Layer? I barely know her!

@quaxk

7 жыл бұрын

or you can just get the old johnny out of the shed and say hello

Perfect! As someone new to all this, this video answered all the questions I had that I was too embarrassed to ask! Made me laugh a lot as well! Sent you some beer money through Patreon.

Finally split point, chisel point, and the need for pilot bit explained. Made it to 60 year old and never knew. Thank you!

A very, very good video. Thank you for this!

When drilling very thin plastics, high speed and low feed are critical, as well as holding onto you piece. If you don't have enough ripums, you're going to helicopter.

@LunaticCharade

7 жыл бұрын

hellacopter ;)

@ruller213

7 жыл бұрын

I'll admit, i laughed a little harder than i should've at this comment

@KnolltopFarms

7 жыл бұрын

Do you have to yell "Get to the choppa!" as you pierce through?

Thanks AvE. I learned a bunch of new tricks. These seem obvious in retrospect, but it is the sort of thing you don’t always realise unless you get to watch someone else do their work.

some people didn't have grade 10 shop class. they took basket weaving or some crap. i made some of my "friends" watch this after they chowdered some of my premium chinesium bits to shit. they seemed smarter afterward. thank you AVE.

Wipe some washing up liquid to the inside your glasses, they don't fog up. Simple easy tip from cold mornings biking across the Lancashire hills...

@KnolltopFarms

7 жыл бұрын

Another thing that works incredibly well is good old spit! Not a lung-cookie a.k.a. loogy, but just the thin saliva you get if you imagine biting into a lemon(sorry for the visual!). As a life-long skin and scuba diver we use it on the inside of our masks to prevent fogging and it works perfectly, and is free :) Sadly, if you haven't just brushed your teeth it can stink for a bit, as I'm sure anyone with a nose knows.

@dannydetonator

5 жыл бұрын

We use shampoo for icehockey visors too

Love this educational and extremely funny vid!! :)) I live in Sheffield, England and actually have some old Presto drills (And Footprint one's too somewhere)!! :)

Cheers from Sudbury Ontario! Your videos are awesome! 2nd year millwright apprentice and I’ve picked up a lot of little tricks just from watching your channel. Thanks, man!

Nice vid, as an apprentice in the UK in the early 90's the first thing we learned was how to sharpen drills with the stepped edge. We spent the first class resharpening boxes of dull drill bits from the year before! Has been so invaluable as even now at work I've found when you get a crappy brand new drill bit that barely cuts through stainless, a few minutes on the bench grinder and it's chewing though like a hot knife through butter!!

"This is like uh... Diamond." I laughed a little too hard xD Frame you fack! That's a new one. Great vidjao!

Another trick for finding center of a hole transfer is use same size drill bit or very slightly smaller & tap with hammer & then rotate the bit to a 90 degree angle to the first strike & hit again. This will leave an "X" mark that you can then hit with center punch & center drill to prep for desired drill for hole.

@tylerfriskie8066

7 жыл бұрын

good way to shatter a bit... done it before...

@billhartnett6413

7 жыл бұрын

tyler friskie

@sdial

7 жыл бұрын

Put some poor-man's dykem (black sharpie) in the center of the hole. Push and rotate the drill bit (preferably split point), this will give you a clean scratch in the center of your hole to punch without risking breaking the tip.

@billhartnett6413

7 жыл бұрын

Good tip...I'll give it a try! We have Dykem Marks at work & they are even better than a sharpie because the "paint" dries & stays for a long time!

@billhartnett6413

7 жыл бұрын

Just give the bit a love tap - don't go at it like a 200 lb gorilla...plus you don't want to damage your tip (just the tip mind you). I also use a tap with a sharp point to put a center mark on before using the center drill...those you do have to be carful off...I had one shatter & embed a chunk in my arm....don't use little taps..8mm or so is good!

love these kinds of videos, as a mechanical engineering student anytime i can learn stuff like this is awesome.

Great video! I would just add that the cutting angle is a super interesting component of drilling holes and any other cutting processes. You mentioned "brassing off" or dulling the drill bit, but I believe the better explanation is that a neutral cutting angle is best for softer materials like plastic, brass, etc. I have a set of drill bits that I've honed the edge to be a neutral cutting angle and they don't grab.

I love you man. I mean that totally platonic. This is like watching things that matter in life vs. the crap that you find on the boobtube. Rock on, from Western NY where people get their hands dirty...I love my spring loaded center punch (and my little pcnc)... I bought a certain personal cnc built in china but designed in the USA(yet rigid as a bull showing off) and got hooked upon your most righteous videos. While playing your stuff like an 8 track looping in the background while I work to your sage advice and explanations. Loving my new machining pre-retiremnet situation and listening to your stuff whilst i'm working. Hoping to see more from you soon my friend.

@dannydetonator

5 жыл бұрын

Hey, can you advise on how much CNC like yours will set one back in $$ plz?

Want fun? Catch the rebar with the bit. Done that before with a Hilti hammer drill...... not fun.

@anthonyellis519

7 жыл бұрын

happens to me everyday. no fun while up on the ladder to. then you wanna curse out the foremen when he ask what's going on. #PFO

@superdau

7 жыл бұрын

Yeah, that's when you think you broke the Hilti, because it suddenly ratchets, but then realize that it has a safety clutch. Wish my Metabo drill had that when it broke my hand.

@anthonyellis519

7 жыл бұрын

superdau Holly fuck

@marcomedina4434

7 жыл бұрын

You have a hard time not hitting rebar going through a concrete floor with a 1-1/2" masonry bit. Just back off the pressure, brace with your knee (or wall) and let the company buy a new bit when you're done :P

@MysticKnight38

7 жыл бұрын

ouch

Our hero, Ave, more coherent drunk than most of us sober.

One thing I discovered that works good for a cutting fluid is boiled linseed oil. It bites so hard that I tend to thin it out with mineral spirits so that the drill bit won't bite too hard

brother you are hilarious , keep em' coming!

"... laminated dead tree carcass." Nice.

I start watching u r channel not because of the tech but the laughter :) keep u with the great job!

I like the way this guy minces as many words as possible with the highest possible frequency, but somehow doesn't end up mincing any words whatsoever.

"work like a train toilet" I guess that's a good thing!

@wakeupmofoers691

3 жыл бұрын

those greyhounds ever developed a toilet in it ... LOL

Take the time to learn how to hand sharpen drills and tools and go for the super expensive stuff. You will never regret that decision, home owners especially (and for the love of god do yourself a favor and work with metric :) The headaches are significantly less). I've drilled countless holes with shitty bits, I can make them work if I need to. But the average 300 pound gorilla is just gonna lean on that thing and mushroom it to shit. Proper HSS drills will at least take the heat. We used to challenge each other around the shop, who can sharpen a drill by hand like a machine would. Heck I remember being busy with a job, discovering an old drill in a drawer and being very exited to have another drill to sharpen real quick. Dropped everything and ran to the bench grinder like a little kid. P.S. Just a little tip for doing second cuts or split tip as you call it. Use a diamond dresser and clean up your wheel beforehand, I'ts nice to have a stone with a sharp corner. Then clamp a little bump stop with a vertical face on your tool rest so you can really get that plunge line spot on. You can then run the drill backwards and forwards along that stop to get a clean cut. It's not really free handing at this point, but hey, gotta eat too. I have a 6mm pilot drill that has his own little spot on a wall shelf cleverly called "pilot". It's the only drill I ever sharpen like that, or have to. So my "clamp" is just a welded piece of angle iron that only works for that specific 6mm.

Thanks for all this information! Here's a tip for everyone, if you've ever tried to drill hardened or heat treated (wear) steel, you know it's an almost impossible, totally frustrating, very expensive undertaking if you use regular drill bits but try using carbide tipped masonry drill bits. Works way, WAY better. Still not great, you will still go through a lot of bits but you will get the job done and the bits are relatively inexpensive. Of course use LOTS of lubricant/coolant. I use used motor oil, probably not the greatest but I got plenty of it.

You have the best humor on the whole wide KZreads.

You always do a great job making me laugh. :)

Diamond also makes the worst grilled cheese..

The percussive rock drillbit is the only one a man needs!!!

Woah man chisel pilots, new to me! You probably saved me about a million future drill bits, thanks!

I've gotta try some of that diamond cheese.

Excuse me, my rum and coke is broken... nice B)

Most jobbing shops in the UK still use Metric/ Imperial / Letter stamp drills .... It's still quite common here and we still use Imperial and BA threads too ... ;-) Center drill are ok, but you'll find that Spot drills when your CNC machining are better ... If your going any depth with a center drill the ends tend to jam up & twist off leaving the center drill tip in the job ... ! Wait till you start getting into U drills and rapid material removal .. Ohhhh Boy ... !!!

You my dear are hilarious and a smartie. Love you so f-ing much, I sent the link to my Dad. He just about busted a gut. Not a nut, his gut! Now you are a regular part of our language: "Now you're just making smoke!" "Are you friggin' and a fussin' around?"

@tinkstrattonkincaid8399

4 жыл бұрын

Oh and I played the trick o him with the reverse thread. Took him a couple seconds!

it's always fun to hear about americas hat

@curmudgeon9343

5 жыл бұрын

do you mean asshat?

where is the metabo????????

@franzschmidt7621

7 жыл бұрын

ave, do you know the brand einhell

@franzschmidt7621

7 жыл бұрын

but its cheap

@IvoTrausch

7 жыл бұрын

Einhell, the german horror freight

@Tomartyr

7 жыл бұрын

For a second I thought you were talking about a meta Weabo.

@MrEinstain

7 жыл бұрын

Einhell is horrible. it's not even good for hobbying, i got a cheap hand router from them for 80 eurodollars, it came with a bent base. Wasn't bent from impact either, because the next one i got had the same shit. The way they were cracked and bent makes me think they used some coke can grade aloominoom for that piece. ended up throwing the thing into the garbage, i'm not losing a finger for a scam of a power turd

"carrying on with the cheese analogy...a diamond". Still laughing. Thanks AvE

Excellent information that I never knew. Thanks a bunch AvE

step drill bits are awesome for plastic no helicopter of death scenarios lol

@SuperAWaC

7 жыл бұрын

i have a set of carbide step bits and they are the best thing ever for drilling holes in enclosures if you need to dril multiple sizes for different things. don't need to fuck around with changing hole saws out, although hole saws are fine if you only need to cut a single size hole for conduit. i got asked "why carbide?" and well it's for that single time you gotta drill through or embiggen a hole in a a stainless countertop or enclosure made for kitchen use.

Great video not visited you for a while keep on keeping on

Absolutely absolutely LOVE this video, man! Super super useful! Thank you!

My chin hurts!!! When you said you didn't know how to releive a drill point my jaw fell and my chin hit the desk! Ive only seen a couple of your videos but you strike me as a knowledgeable man and well expereinced in McGivering all sorts of projects. I'm going to tell you the secrets from an old, old machinist, me. Early in my carreer I was employed by a demanding job shop. They expected everyone to sharpen drills by eye all the way up to their largest drill a 3" monster, and they better run true!! My foreman, they had them in those days, not supervisors ( can only tell you to do something, not how to do it) told me to pic up a new drill and look at the thined web. Now go over to a bench grinder and make your dull drill look just like it. First you need a sharp corner on the stone. Take the drill and bring the flute side up to the wheel on a generous angle. While watching the opposing sharp cutting edge grind some of the flute back. Turn the drill in your hand 180 degrees and repeat. Repeat this process until the chisel point is gone but there is still a point. I've done this so much through the years I'm generally faster than setting up a drill grinder and my drills run true within .002 on the smaller drills. Or you can by a Drill Doctor, topline model, and sharpen carbide drills on its diamond wheel, remove drill and holder, insert in thinning port and vois la, sucess!

"Hot Chip Welding" - that was my nickname back in high school.

I have that very same holesaw set in Australia. I think it was $8. Biggest sack of crap but I use it once or twice a year.

Another great video! Thanks for taking the time.

that paper trick was actually top notch