What did you guys think about that ending?? :) Trying something new...

@zacharywilliams9647

3 жыл бұрын

I think you should include more bloopers at the end of your videos, it was pretty funny!! 🤣

@b-2466

3 жыл бұрын

Bloopers are always funny.

@edgarcarbajal5892

3 жыл бұрын

That’s pretty cool. I haven’t seen it done. Thanks for all the vids, You’ve encouraged me on getting my C20 out here in California.

@danielarcila3834

3 жыл бұрын

After a job well done, the humor at the end was a plus.

@hkhsm359

3 жыл бұрын

It's very cool.. please keep posting.

This guys KZread makes HVAC seem so easy and stress free 😂 clean work

@mepadda

3 жыл бұрын

kzread.info/dash/bejne/jIaao6eYktffccY.html

@5822huron

3 жыл бұрын

It can be. He also works for himself which is peaceful. No one is rushing him. He is his only pressure.

@ancientpersianempire

3 жыл бұрын

@@5822huron facts! the days of some money hungry owner blowing up your phone asking why are you not off to the next job are over. "time served"

@claytonjones3509

3 жыл бұрын

I can assure you it’s hard work! Under houses! Roof jobs and attics! Ductwork and all! I’m 3 1/2 months in helping a HVAC Tech and learning! Installs can get pretty rough! The outside condenser unit is the best part! A/H are the worst in my opinion

@allykatt940

3 жыл бұрын

we all know that it dont really go that way.

I wanted to cry seeing those packouts so well organized, a thing of beauty! Great Video!

@beentheredonethatoriginals5673

3 жыл бұрын

Mine looked that way for about 10 minutes 15 years ago!

@murkyturkey5238

2 жыл бұрын

@@beentheredonethatoriginals5673 lmao

I have a huge appreciation for you putting connectors on the wiring and not just jamming the wires into the terminals.

I just want to add, not all HVAC jobs or environments are this clean and carefree. Great job.

@khw71471

Жыл бұрын

They can be. Great direction to strive for...

@fixitallpaul4847

6 ай бұрын

You dont mean hot dirty dusty attic duct install.

great job man! very systematic! love the attention to detail. I have never considered HVAC as a career being an MET, but this is very convincing. I like that you have everything on hand, no trips to pickup stuff that takes time away from the job.

I am like everyone else kept waiting to see the rookie mistake and nothing but clean tight work. Great job and I do get your point about forgetting something on your parts list for the job that day.

Awesome video. Your work is clean and super neat. Seeing how organized you are is truly inspiring. I pick up on so much and it builds my confidence in running my own show. Keep up the great work you are a blessing to the trade!

one of the best trades channels out there. keep up the hard work man!!

when I started diving over 30 years ago, a buddy told me to watch out for the divers with all new dive gear.

Nice to see that another tradesman is taking advantage of the technology that we have today to properly pull a vacuum.

@mepadda

3 жыл бұрын

kzread.info/dash/bejne/jIaao6eYktffccY.html

@pcakes1878

3 жыл бұрын

large diameter hose is not a new concept just saying

@mauricioramirez3012

2 жыл бұрын

@@pcakes1878 your’e that guy…..

Once again very clean job ! Love all the great tools you pull out just makes the job go so much smoother! I notice you do all your own electrical work and be man show is right ! Keep up the

@DavidHernandez-gt9bo

3 жыл бұрын

Sorry for the typo ... keep up the good work another satisfied customer!

Quality work. Have all the proper tools, all the parts needed. 👍👍👍

Wow, never seen someone so organized with such neat and clean tools, is this a youtube thing

@seanwatson7191

3 жыл бұрын

Its called efficiency helps knowing exactly were everything is and that will work when needed

@teddycarter2618

3 жыл бұрын

No, you should see the work van of the tech who trained me..

@octaviomartinez7535

3 жыл бұрын

It's like real life home Depot videos 🤣

Love your equipment every things perfectly placed and organized leading u to be safe productive precise & time well managed ! Awesome man!!👍🏽

So I'm watching this and my wife yells from the other room. "Are you watching 70's porn"? 🤣🤣🤣🤣🤣

@godzillasauris

3 жыл бұрын

😂

@johndabek58

3 жыл бұрын

Mine too LOL

@jamram9924

3 жыл бұрын

Is that what it sounded like?

@F.Castle

3 жыл бұрын

@@jamram9924 probably the music kind of lol

@thomasrouse4840

3 жыл бұрын

Lol

I'd love to work for this man, and learn from him

@tommy2buttz668

3 жыл бұрын

He's the Walter white of hvac

@longjohn8672

3 жыл бұрын

@@tommy2buttz668 lmao 🤣😂😆

@clevc112

3 жыл бұрын

Me too.

Forgetting the surge protector is the rookie mistake? Click bait. Install looks pretty though good job 🤘🤘🇺🇸🇺🇸

Dude you're so organized, it's awesome! No other way to be!

@alexozorio8090

3 жыл бұрын

When I go to jobs and everything in my work truck top to bottom is organized I notice I have a clear head going into the day ahead

I love the passion that you have on your videos, there's nothing better that do what you love... Louie the Boiler man.. Wepaa...

Every aspect of the work you did looks very clean, professional, and very quality! Nice job!

Just ran into your content. Loved how clean and organized you have your tool set up. Looking forward in seen your content now that I’m jumping to this field.

I like people that are willing to show the mistakes. Very funny!! America loves bloopers. Great work. Very clean. You do awesome work

I grew up around this trade as my Dad is a HVACR Mechanic, formerly worked for TRANE Comercial and Industrial, but had his own business installing residential units. Huge nostalgia watching this video and seeing the TRANE and Mitsubishi badges.

Bro I'm attending school right now for hvac and your job is so impeccable

@sgt.mikebaran7105

3 жыл бұрын

Keep Studying

Your work and tools are so on point. You inspire me to take pride on what I do.

I appreciate the neat, clean, organized work with a high lever of craftsmanship. I’ve had the worst luck with plumbing and HVAC contractors destroying beams, columns, joists, etc., and doing sloppy electrical. Whatever you charge, you are worth it.

Great looking work in my opinion Zack ..... also, your production skills/techniques are superb !! An out-take or "blooper" at the end is a good idea too... the viewers like a little bit of personal touch from time to time.

@QualityHVACR

3 жыл бұрын

Thank you!!

your work quality is top notch,very well done once again

A very nicely done job, best regards from a Swedish heat pump technician.

Say bruh you the goat man I love these videos how professional and neat your work is. That lil vacuum was neat

Very nice install man. Very graceful, beautiful conduit work, even took the time to crimp the little stacons on the high voltage

I like your attention to details, a nice clean install.

I want to hire you just for your organization and clean work. This is what a real pro looks like. That system looks so nice

Good work bro definitely like how you show all your work keep up the great videos

Thank you for the videos brother! Very informative

I thought the rookie mistake was placing the unit next to a DRYER VENT EXHAUST!!!

@OcRefrig

3 жыл бұрын

Yea, That’s Never a Good idea and should be avoided at all cost. They Plug up Condensers something terrible. Preferably no closer than 10’ to a Dryer exhaust.

@JDT738126

3 жыл бұрын

Been there done that, sometimes its tough if theres not many places to place the unit

@BYENZER

3 жыл бұрын

At least that D-vent was high. I had one blow right at the unit. I vent 90'd it away. HUGE difference. Before, the unit ice'd up FAST, then early drop into defrost! Beware D-vents!

@jjyemg2397

3 жыл бұрын

Blocking the crawl space vent?

@brettwing737

3 жыл бұрын

That's a crawl space vent guy!

Great videos Zack. Just found your channel that's quality hvac work.

That is profesional work bro keep up the good work!!

These inverter mini splits are a marvel of engineering. They cool better than almost every system available when installed correctly. Problem is too many people take short cuts and they're a pain to work on after Theyre installed. Nice video

@mubaddagammoh4912

9 ай бұрын

Until the coil start leaking and Mitsubishi gives u a coil to replace they are pain only the wall mount , ceiling cassettes are way easier

Best videos, just straight forward minus the talking and bs. I appreciate this!!

Awesome work!! Keep the videos coming 🤙🏽

Great work brother!! I like your attention to detail!! Keep it up!!

Thumbs up man! I see you ran that 4C mini split wire, mint! 👌 Bloopers are awesome, they make me laugh out loud! 🤣

Hahaha! The blooper reel at the end was awesome!! Keep them coming brother!

A nice neat tidy job Zac, with nice sharp camera recordings, i enjoy watching your A/C installations here in Australia 👍

Very nice, neat work! It was enjoying to watch.

Outstanding job...love your informative videos

Amazing work! My heart sank when I saw that dryer vent right next to the unit though. :(

The bloopers at the end lol. Nice clean work man, keep the videos coming 💪🏼⚡️

very neat trick to tape the end of the two wires before feeding them through the conduit. much appreciated

Pleasure to see you work. Professionally done.

Quality video, thanks for the effort it looks great. Wish my install went half as well but hell it got done anyway.

For your vacuum pump , on eBay or Amazon you can get a adapter to use a 12 amp Milwaukee battery so you are sure to never run out of battery or leave it on an extra long time when needed.

@5822huron

3 жыл бұрын

Exactly

@sihnhold8249

3 жыл бұрын

Can you use one of the lower amp 18 volt batteries? Those 12 amp batteries are expensive.

@5822huron

3 жыл бұрын

@@sihnhold8249 They make an adapter on Amazon.

@coldfinger459sub0

3 жыл бұрын

@@sihnhold8249 Of course do unit comes with a five amp hour battery. 12 AM it’s just a suggestion for that added security of not running out a battery in the middle of the job. We’re having the ability to go longer between having to recharge your battery if you have a Lotta jobs every day . Just a vary nice option And you can make your own using a older dead battery and just buy individual lithium ion battery cells and wire it up yourself it’s very simple gradeschool level project.

I do install and im messy as hell lol this guy is really good, clean, organized

im 23 yrs old just passed my EPA exam today. love your videos !

Lov you videos you have helped me be more officiant installer and service teck.. keep up good vids

I’m admiring your tools and very organized…

Looks clean, good job!

In school at the Dickson TCAT right now on my 2nd trimester. Already have my universal certification and HVAC Excellence Certification. Can't wait to find a good company to work for.

Good job ! VERY CLEAN

Emt is used all the time in commercial application in Htown. It will rust but the unit will due for replacement by then. Sometimes location is what it is. Nice job!

Nice electrical for an HVAC guy.....Love the equipment....Just got my appion 1/2 hose and core extractor....Made a big difference for me.

Makes it look easy! Work of art man!

Bro I listen to this beat all the time at home. So relaxing

@gdfji6229

3 жыл бұрын

What’s it called?

Not sure if he did but you should always let the system seat for a while after a vacuum, and watch the gage. Sometimes the pressure will go up do to moisture in the system or a leak. Is easier to detect a leak if the system is pressurized with Nitrogen to about 100psi. Let it seat for a while. Vacuum again and check pressure. He is a very neat worker.

Thanks for the video. Do you ever wonder about breaking a vacuum with the micron gauge attached? I typically isolate the guage with an additional valve core tool but your process was very smooth.

Nice , neat job ... You got a good tool set up as well ...

The outtakes at the end 🤣🤣🤣, cool job bro 👌👌👌

Hey buddy I really like it and I enjoy watching your work!

I like how organized you are

Very profesional ,everything very neat and tidy , great job!

Love the way you work .very Neat,great skill.

I love how easy those mitsubishi systems are to install.. we installed a number of those this summer.

Your tools are woooooooooooooooooooow, and you are organized to the max

It helps having all the right tools. I spent the first 5 yrs doing Hvac with limited tools.

It seems that everyone has missed the fact that the AC unit appears to be installed under a "dryer" vent. If you think dog hair is a problem wait until the coil gets clogged with dryer lint.

@pcakes1878

3 жыл бұрын

thats job securoty david😅

@SoutheastTx

3 жыл бұрын

Seen plenty of those pain in the ass to clean sometimes.

Nice install and tool kit 👍

You mean you don’t get it on the first take!? 😂 love dem bloopers! Keep up the quality work!

@markgimalalud9421

3 жыл бұрын

Can i apply to your company ser i want more experience and learning to our profession 🙏

Man, you work so clean.

Beautiful job!

Great work as always sir

Great video you got some kool tools

And i thought the NAVAC Vacuum i had was small! Great work!

The definition of a "Skilled Tradesmen"...............

Love your tools.

Great video thanks for sharing. Great comments also. As long as you can see a mistake and fix it Makes you a pro at what you do

Very neat install

Some fancy tools you got there pal. The cordless vacuum pump is nice.

Neat and clean work. I see Milwaukee everything had to look and wonder if the made a truck

Awesome tools. Hope to have some in the future.. 🤙

That’s a cool vacuum pump! Nice video.....

Great work brother

Great work my favorite part of this video was the tools

Nice Milwaukee Tools it just makes you the way easier love tools

Nice work bruh, always neat

This is very good content! Keep it up

Great job, very clean,

Love your work. 🙂

Excellent work,good luck.