How to Use Fieldpiece Wireless Charge and Test Kit
Тәжірибелік нұсқаулар және стиль
How to use the Fieldpiece JL3KH6 Wireless charge and test kit on #ToolboxTuesday. Want to run tests on a system while you are NOT out in the heat? This is a system that is capable of just that with the Job Link app.
Take a full system snapshot quickly and easily with the JL3KH6 Charge and Air Test Kit. This kit consists of 2 pressure probes, 2 pipe clamps, and 2 psychrometers in a quick access padded case. All measurements can be sent up to 350’ away directly to your mobile device with the Job Link app.
Buy a Fieldpiece JL3KH6 today at:
bit.ly/2BEym7E
Toolbox Tuesday covers how to use tools, accessories, tips, hacks and best practices of the HVAC industry. Learn about HVAC, duct, coil, flame sensor, sequence of operations, electrical, condensate lines, ohms law, air distribution tools and more.
Learn more about how to become an HVAC Tech, BuildATech class, HVAC training and HVAC tips and tricks at:
www.lennoxpros.com/hvac-training
Audio licensed through: www.audioblocks.com
Video produced through: www.ellevengroup.com
Пікірлер: 62
I know that guy. He, was Senior instructor, at the Hvac school I attended back in 2015. Wow that's crazy.
Love mine so far, need to get the adapters to charge with, pain in the ass taking on and off, but the complete report is amazing
Great video and very professional. Looking forward to seeing more of your content.
Thanks for taking the time to post this for us. Nice work.
Excellent presentation! Great job thank you
Great video. Great explanation. Thank you.
Great video!these probs are awesome!!!
First time viewer, new subscriber. Great video. Thanks!
good video and demonstration. I think you need one more temperature probe to get the outdoor DB for supper heat calc, unless it is built in to one of the outdoor clamps, but i think you have to measure this on your own and manually enter it in the app??
Thank you sir
Now they need to include all of these measuring tools pre installed in units so you can just connect an app to the unit and its good to go.
@seanmathews1826
2 жыл бұрын
Carrier does with the VNA4 Series condensers. you can do exactly that. Link with Bluetooth and bam you have pressures super heat and sub cooling.
@murkyturkey5238
Жыл бұрын
@@seanmathews1826 wow that’s insane, I’ve never seen that 😂
Need to be able to input model numbers on systems in the app for all info.
I got mine today let’s see what’s gonna look good to me thank you sir
@WreckingCr3W2
4 жыл бұрын
What's the verdict? Can you charge using this? Is it worth it?
@lopez7399
4 жыл бұрын
Any update
@filimonhabtom4852
3 жыл бұрын
any update
@mikesmith3064
2 жыл бұрын
Fucking hello!
Hey I work for a community that's 8 story. Will the interior signal probes reach out to the roof where my condensers are? Thanks!
Would you say these are better then the digital field price gauges?
Anyone have trouble linking the large pipe clamp , we do commercial and need that we have 3 and none are linking up
Does anyone add a T fitting to the suction probe so you can charge when needed?
@uhNomad
3 жыл бұрын
Yes
@davidjanus9046
3 жыл бұрын
Yup
@BillyN31
2 жыл бұрын
Yeah. I use my appion Schrader core tool
Error because condenser coil is not getting proper airflow to repel heat you have your service panel off.
@pedrocervantes7561
6 жыл бұрын
Good video by the way
Any videos on recovering refrigerant with these?
@kenmoses8
3 жыл бұрын
Tommy Hummer adding a T to the service port for charging and recovery? Haven’t tried yet. Still have sman480
This is the exact copy of the I manifold
does it automatically convert super heat sub cooling?
If the unit is low in refrigerant. How you add it.. Too fancy tools. I prefer the sman480
@michaelcooper9475
4 жыл бұрын
By using a Tee in line with the probe you can charge with refrigerant. Appion and Yellow Jacket sell valve core removal tools that have a side port and valve that can be used to charge. Out of the box, you cannot charge with this tool. With either of the previously mentioned valves you can. This makes data processing and customer service a breeze, no more writing everything down! You simply have to send it to the customer's email. Hope this helps!
@jasonreitz6049
3 жыл бұрын
@@michaelcooper9475 hey my question is, if you use a core removal tool, wouldn’t you have to pull the shrader on the service valve since the core tool won’t depress the schrader? Unless they make a different tee just for that purpose..
So you just use these tools for system diagnostics, and then use your regular guages for charging? Is there any way to charge a unit with this kit?
@ericlarson8489
4 жыл бұрын
You get a T adapter.
@TheRealoldcar
4 жыл бұрын
Yes, use a tee adapter on the LP side, control the charge amount with a ball valve or you can also attach your manifold especially if you are using blends and need to attach a vaporizer, just one example. You will also find measure quick with these sensors a game changer.
@dburks1273
2 жыл бұрын
Yes use a charging tee
Are they low loss fitting
@mjohnson6703
Жыл бұрын
I believe he said they are in the video.
This is a only iPhone Use or Android phone tel me
@TheRealoldcar
4 жыл бұрын
Both, but Iphone or iPad works best
You would have better reading if you closed the door on the condenser. Other than that nicely done.
I didn't see how you do refrigerant charge while the set is on.
@BKWhite07
5 жыл бұрын
😆😆 right. It'd be a tough task
@toddo.7819
5 жыл бұрын
Easiest way is with a valve core remover, know your tools 😉
@ericlarson8489
4 жыл бұрын
Just get a T adapter
@TheRealoldcar
4 жыл бұрын
Yes, use a tee adapter on the LP side, control the charge amount with a ball valve or you can also attach your manifold especially if you are using blends and need to attach a vaporizer, just one example. You will also find measure quick with these sensors a game changer.
Dannng cool your not supposed to take pressure reading with that door off cat daddy !!!
🤓Hi, it's a nice video and methodical, but don't forget to wear protective gloves and goggles for God's sake
This system is nice in a lab. Try to use it in real life now with walls in the way. You will lose your indoor readings because the range on this system SUCKS. I have the sm460 system with the jl transmitter and by the time I get back to my manifold outside I loose the indoor readings. Don’t waste your $$$ on this stuff.
@MrBdogg317
4 жыл бұрын
Frank L you don’t need the jl transmitter anymore. With the probes
@caligarcia87
4 жыл бұрын
@@MrBdogg317 how far can I use them
@Papasquatch73
3 жыл бұрын
I used these with zero issues on a 2 story hotel. Range is great
Great video! Friendly tip don’t suck your teeth when talking.