No video

What 4th Gen Bronco Mods Should we do?!? Comment Below!

The guys picked up a classic Bronco and Tim walks you through the in and outs of this rusty beast.
Tim is the lead host
Ryan runs the camera
Matt edited
The music is knockout by track tribe

Пікірлер: 33

  • @rosiecochrane742
    @rosiecochrane7423 жыл бұрын

    The door will be fine! I had a '91 Chevy Cavalier and both doors would open. I had to hold them shut as I went around corners. I wrapped a towel around the passenger door handle for turning left.😂🤣

  • @DaveFrazier69420
    @DaveFrazier694203 жыл бұрын

    Just be careful kicking the bright switch on the floor. One time I knocked one over and pulled a wire loose. Lights went out, just when I wanted brights.

  • @flockobears
    @flockobears3 жыл бұрын

    Tim is such an optimist. "That's fine." "This is fine." I'll fix that."

  • @DaveFrazier69420

    @DaveFrazier69420

    3 жыл бұрын

    I thought he was workshopping a new catch phrase. “That’s fine” it’s more versatile than “custom clearance”

  • @RustedUP

    @RustedUP

    3 жыл бұрын

    @@DaveFrazier69420 but custom clearance is not always optional in the UP...and it’s just a hammer or twist of the wrist modification here...

  • @davidflint9883
    @davidflint98833 жыл бұрын

    VERY 'custom' already!

  • @flockobears

    @flockobears

    3 жыл бұрын

    My personal favorite was the piece of wood holding up the body.

  • @melvinobrien2625
    @melvinobrien26253 жыл бұрын

    make it a convertible

  • @laserpants13
    @laserpants133 жыл бұрын

    Can you do that mod where it goes 0-35 in about 20 minutes? Or is that only on the white model?

  • @RustedUP

    @RustedUP

    3 жыл бұрын

    We already have that mod. It was included because of the Eddie Bauer Edition... Duh

  • @drozy2318
    @drozy23182 жыл бұрын

    Hey man on my bronco the way I see it rust is just free weight reduction😂

  • @AntonDoiron
    @AntonDoiron Жыл бұрын

    I just got a free 95 bronco project. Has some rust also. A bunch of these old ones probably got junked due to rust. I like the 91 models hopefully you're making good progress on it.

  • @Lhopsecker
    @Lhopsecker Жыл бұрын

    Did you guys do anything further with this, other than the snowfari and driving it up a Ranger?

  • @RustedUP

    @RustedUP

    Жыл бұрын

    Unfortunately the band fell apart. I've been saving up money to reboot it.

  • @joesieg4444
    @joesieg44443 жыл бұрын

    I just bought a 1990 bronco in buffalo new york, its pretty rusty lmao. So far ive replaced, The spark plugs The ignition switch The battery The rear window motor The heater core The drivers side axle shaft and u joint The drivers side ball joints The drivers side brake caliper The drivers side rotor and hub The drum brakes The rear brake lines And i still have to do all that on the passenger side The shocks The leaf spring mounts The driver and passenger floorpan And find a coolant leak Im hoping to be driving it this summer

  • @RustedUP

    @RustedUP

    3 жыл бұрын

    wow! Sounds like you've got a real project on your hands! Good luck getting it done for summer!

  • @joesieg4444

    @joesieg4444

    3 жыл бұрын

    @@RustedUP yeah its been alot of work lmao, but im addicted to these old broncos. Never had one with the brights on the floor though thats kinda sweet

  • @RustedUP

    @RustedUP

    3 жыл бұрын

    @@joesieg4444 we expect to have to do a lot to ours, the rear window was wired without a stop so if held it will just take the top off for you. It runs good and is somehow marginally safe feeling at 55mph though! Lol

  • @prestonhart6088

    @prestonhart6088

    2 жыл бұрын

    my 1990 ford bronco had a coolant leak we replaced all the hoses and the water pump and that fixed it

  • @karlamerika6755
    @karlamerika67553 жыл бұрын

    Mod it by putting a 4 post lift under it 🍻

  • @ericdreher8902
    @ericdreher89023 жыл бұрын

    Welp, it's not a 6 inch lift. It's a 4 inch. Good bones though. cant wait to see what ya do with it.

  • @Dutch1951x
    @Dutch1951x3 жыл бұрын

    What mods.......thats easy! Come up with a "HAND CRANK REAR WINDOW CONVERSION!" Instead of the electric one, maybe using a Blazer hand crank assembly..... Gauntlet throw, you guys bad enough to pick it up and come up with one, lots of Bronco would love you if ya did.........

  • @RustedUP

    @RustedUP

    3 жыл бұрын

    That work be very handy, current set up leaves much to be desired! Added it to the team idea board!!!!

  • @Dutch1951x

    @Dutch1951x

    3 жыл бұрын

    @@RustedUP outstanding!

  • @juang7589

    @juang7589

    3 жыл бұрын

    Check ebay or the bronco groups on FB

  • @backyardbraaapn1017

    @backyardbraaapn1017

    2 жыл бұрын

    Lol, he mentions the one and only goos thing about the 💩 Blazers!!! 🖕🤣💯

  • @daviddzedzy9194
    @daviddzedzy91942 жыл бұрын

    just got 1994bronco has no brakes ,guy junked it body is like new on it in out ,pluse ,it need new starter, has 89,000miles same as ours

  • @RustedUP

    @RustedUP

    2 жыл бұрын

    Hell yeah those things are awesome!

  • @stevecarlisle3323
    @stevecarlisle3323 Жыл бұрын

    Get rid of that lame tailgate, put a pickup tailgate, and build a lift up rear box cap door.

  • @haroldsmith1531
    @haroldsmith15313 жыл бұрын

    Will you sell me your front fender emblems? I have an Eddie Bauer and need both the bronco and the trees

  • @RustedUP

    @RustedUP

    3 жыл бұрын

    Sorry, unfortunately we have plans for those!

  • @haroldsmith1531

    @haroldsmith1531

    3 жыл бұрын

    Darn, thanks anyways!

  • @backyardbraaapn1017

    @backyardbraaapn1017

    2 жыл бұрын

    Lol, I just threw mine away. Didn't realize anyone may want them