Thank you so much for choosing our products and sharing this video. Looks great!

@UntamedMotors

2 жыл бұрын

My pleasure. Thanks for making awesome products and offering great customer service! =]

@lamontgarrison3296

2 жыл бұрын

Yess they are a must to stop ding pirates

@J.Young808

2 жыл бұрын

@@lamontgarrison3296 I put RSG on my T4R for that reason. Trucks would still hit my door if they are taller than my sliders

@gatordunn

Жыл бұрын

@ WESTCOTT Can you please make these same sliders with the kickout for the GEN 3 TUNDRA?

Been looking around for my 21 AT4 gonna check them out

I just installed Go Rhino RB20s on my 2018 Tundra Crewmax and I love them!

looks great the way it is

@UntamedMotors

2 жыл бұрын

Appreciate it man, thank you!

Westcott is top notch

Bravo! Really like the look of the new sliders!

@UntamedMotors

2 жыл бұрын

Thanks man, I love how they turned out!

Beautiful rig!

Rig coming along nicely !!!!

@UntamedMotors

2 жыл бұрын

Thanks man!

I did the coachbuilder rear shackles and the ride is great. Highly recommend for the sag you are experiencing!

If i were you, that 21 Lunar Rock TRD pro V8 Tundra would be my FOREVER truck. Keep making vids with it and have fun, maybe even supercharge it!. And when you are ready to test out the 2022 V6 Tundra, Sell off that Shelby Raptor for it. You can then make side by side vids comparing the 21 Tundra vs the 22 Tundra. Youll regret YET AGAIN getting rid of that 5.7 V8 Tundra beast

I like the steps! I’m thinking about upgrading Westcott got some products for our vehicles that are American made!

Look great but still like the RB20’s. Nothing beats the look of those for me. Truck looks incredible as well.

@UntamedMotors

2 жыл бұрын

Thanks brother. The RB20s are exceptional… I also love the look of those. Super simple to install too! Win win.

@gerrybaker1422

Жыл бұрын

They do look nice but it drives me crazy to see the vertical brackets on the rb20s

Elegant truck!

Heat is your friend for removal of the pro rack. I heated each bolt head first and then would loosen a full turn and then tighten a half turn and then repeat the process. The back and forth along with the heat eventually breaks loose the red loctite...good luck!

@UntamedMotors

2 жыл бұрын

Appreciate the tip. Stripped one of the heads already so that’s been a huge headache.

@michaelskoglund6320

2 жыл бұрын

@@UntamedMotors Ugh, sorry. Drilling out the bolt and dropping the headliner? Huge headache for sure...

Looks good! I think I prefer the looks of RSG slightly better.

Very nice. Trd pro could use a Trd cold air intake, trd oil and radiator cap for engine bay possibly, along with KC Hilites led engine bay light kit. I usually mod up the engine bays and custom paint the engine covers on my Toyota's. Nice thing about Tundra it comes with hood struts as opposed to prop rod, models that do not, I add the struts.

@UntamedMotors

2 жыл бұрын

I hadn’t thought much about dressing up the engine bay… good idea. Yeah thank goodness for the hood struts, the Tacoma doesn’t have them and it’s hood weigh about 5000 pounds, lol.

@jameshollowayhagood2501

2 жыл бұрын

@@UntamedMotors any reason you're not adding the Wescott lift on the tundra? strongly considering for mine...I feel like the front could sit a touch higher

@UntamedMotors

2 жыл бұрын

@@jameshollowayhagood2501 I’ve considered it but ultimately decided against it. I’m content with its current stance.

@johnnysifuentes4188

10 ай бұрын

Agreed I have a 2020 Tundra TRD Pro and I went with 275x70x18 tires and with the stock Fox suspension I really like the stance of the truck. Have you overlanded or off road the rig? I always wonder if I take a trip to Moab or Colorado if my truck with the long frame, should it be higher to clear rocks? @@UntamedMotors

Beautiful top plate on those (best in the industry) but a little too much gap from the rocker panel to the slider for my taste. Kinda has the Demello look to them. It’s the reason I sold my Demello’s and went WNOR. They’re tucked up nice and tight! Great lines on the wescott though..

I would suggest some ditch lights and scene lights on your bed rack so that if you ever get to camp late you can see better.

@UntamedMotors

2 жыл бұрын

Those are good ideas

They use red locktite on the oem roof racks. You have to be careful not to bust the bolts. I have seen you can heat them with a torch a bit to get it loosened up.

Message me when you’re selling! I love my 2019 but I love the lunar rock! My truck is a Storm Trooper 😂

@UntamedMotors

8 ай бұрын

I unfortunately already sold this! Miss it all the time.

How do you like the rock sliders as "step" to get in and out? How does the wife like them? I have a short wife need steps, but i really want rock sliders so trying to find a good enough compromise.

Also 1 inch off sets on the tires wheels

Product looks strudy and high quality. I am tempted to remove my predator steps and install these. Thanks for sharing! What are your thoughts on bull bars, to provide front protection from things like animals, etc?

@UntamedMotors

2 жыл бұрын

I’ve never been a huge fan of bull bars… just not my thing. These sliders on the other hand will be a huuuuge improvement over your predator steps. You’ll love em.

@putmeincoach7663

2 жыл бұрын

Please never install a "bull bar" for any kind of impact protection. They will do more damage to a vehicle than what they prevent in the event of a collision and I've often heard of customers having issues with insurance companies bcuz of this fact.

I really like the quality and craftsmanship of Westcott sliders. But man those gaps are huge… don’t understand why they don’t make them hug the body high and tight like others like hefty, shrockworks and C4.

@westcottdesigns

2 жыл бұрын

They are as tight as they can be without the bottom pinch weld from hitting the slider when articulating the truck. We did a bunch of testing and this was as close as we could get them without hitting.

@ditto6608

2 жыл бұрын

Agreed. C4 and WNOR make a them nice and tight. White Knuckles also go from wheel well to to wheel well which is nice and gives you that little extra protection of the bed whereas these only get you to the end of the cab

@putmeincoach7663

2 жыл бұрын

@@ditto6608 My favorite are the All-Pro Off-Road Apex sliders. They fit super flush to the body.

@reasonablepaul9499

2 жыл бұрын

I actually don't mind the way they look. Don't really know what it is, but I do like the gaps.

Nice product, but I'm not sure how practical those rock sliders are in a cold, snowy climate compared to the Go Rhino running boards which have the textured surface which I put on my Tundra.

Will you eventually invest in a set of Catalytic converter covers ?

Tundra looks awesome! Just curious...Do your Ridge Grapplers scrub at all? I put 295 Trail Grapplers on mine and they rub just a little at full lock.

@UntamedMotors

2 жыл бұрын

Appreciate it James! They do. It’s slight… and only at full lock. I learn to live with it because it’s worth having a sweet stance haha. They rub on the sway bar slightly.

@jamesstiller1494

2 жыл бұрын

@@UntamedMotors Amen!

They look good, how much did you pay if you don't mind me asking?

did you end up going to 295s? looks real good

How would you compare this to gorhino's?

Hey, are those the 0 Degree or the 15 degree?

Do these actually bolt to the frame as a functional slider? Or to the body step/rocker location?

@UntamedMotors

2 жыл бұрын

They bolt up to the frame, they’re as legit as they come! =]

@markum5094

2 жыл бұрын

Sliders look fabulous...as does the entire truck 👍🏼

Do they come with Line-X??

I have a set of RCI rock sliders on my TRD Pro and I like them a lot. Question. Do you get any creaking noise from yours as the frame flexes?

@UntamedMotors

2 жыл бұрын

I haven’t noticed that yet, but I haven’t driven all that much with them on yet. I’ll keep an ear out for it.

@AntonioFernandez-ng2bv

Жыл бұрын

@ Snake, are you getting that creaking with the RCI's?

@SuperSnakePlissken

Жыл бұрын

@@AntonioFernandez-ng2bv Yeah. Since they bolt directly to the frame and the Tundra frame flexes i get creaking.

Nice dog

Which sliders do you prefer, the westcott on the tundra or the rsg on the 4Runner

@UntamedMotors

2 жыл бұрын

I love both! Exceptional quality from both companies… if I had to pick one, I’d lean toward Westcott. Great customer service.

@tb693ny6

2 жыл бұрын

@@UntamedMotors you find one offers better traction than the other?

I’m disappointed I thought I would come here and see a 2022 tundra in the driveway

@UntamedMotors

2 жыл бұрын

Haha it may sneak in one of these days lol stay tuned

Did you need to drill any holes for the installation?

@UntamedMotors

Жыл бұрын

I did not