Well I bought a new to me detach lowboy and we need to make some modifications to the Mack
Ойын-сауық
shop Dirt Perfect
www.dirtperfect1.com/shop
Facebook
dirtperfect/...
Instagram
pCNzzDGKFL...
Ariat links
• Save 10% off your first order - ariat.dkkdet.net/c/2316545/69...
• Dirt Perfect's Favorites - ariat.dkkdet.net/c/2316545/85...
Doing some shop work to make a few improvements to the "new to me" detach lowboy and the Mack. Let's hope this goes smoothly!
#trucking
#movingequipment
#customtruck
#shopwork
#metalfabrication
Пікірлер: 644
Confused me at first then I remembered Dirt Perfect means months behind and sometimes out of order videos !
You should've used the Fith Wheel from Lt. Dan. It was a higher Fith Wheel. Exactly what you needed. God bless
Got to see DP working with Chris at Letsdig18 yesterday. We will see DP with Chris again in December when his videos catch up.
Came for the projects. Stayed for the friendly bickering! Nice work guys. Awesome video
Picking on the Meatball Behind the Scenes lots of fun to watch and Arron gives it back as well.
@willb3018
2 жыл бұрын
Meatball. Not nice. Funny but not nice. 😂
@wdwerker
2 жыл бұрын
Not Meatball…Cueball ! I’m bald too so it’s allowed.
Poor Aaron. Management is always on his case.😢
@stevenr8606
2 жыл бұрын
⬆️ nothing a little 🍺, or two won't cure 😉🤭🤫
@cntslesfabrication
2 жыл бұрын
More like in his ass I mean case
Mike I have to say that MAN BEHIND THE SCENES has some mad skills
Love the good-natured banter. I think I would enjoy working with you guys. 👍👍
@DirtPerfect
2 жыл бұрын
Thanks
Man behind the scenes always gets me in better mood.
Aaron you did great on your hole marking!!!!
Great job welding Aaron
Admin did one heck of a welding job !
***WARNING*** You will need to be careful that you don't forget to pick up your gooseneck support arm (stinger) when you hook back up. Because your stinger support cross-member is below the top of the truck frame rail, if you leave the stinger down it will catch the inside of the frame rails when you turn and bend the stinger and piston. Don't ask me how I know. I ended up plating over the top of my frame rails and used countersunk bolts so it left a nice flat and smooth surface. That way if I forget to pick up the stinger it will just slide off instead of catching the frame.
Aaron just remember that management is always right - even when they are wrong
I'm glad to see you remember to move the 5th wheel from behind the truck before backing out of the shop.😂😂😂😂😂😂😂
Aaron did a perfect Job
Aaron's side was perfectly lined up.
I love working with friends. There's always a lot of "Man, what did you do now?!!"
The only lowboy I've been around was a "ground bearing" design. This thing is much more civilized!
@JasonWorksAlot
2 жыл бұрын
Word is thats what those Egyptians folk built them upside down cones with! How times change!
@DirtPerfect
2 жыл бұрын
Yup them or no fun
@wilsonbrooks6072
2 жыл бұрын
@@JasonWorksAlot ==
Don't worry Aaron, we got your back. Don't matter who marks a hole when the driller can't check the centers first before drilling, RIGHT DP. Another great fun video guys, stay safe OH AND AARON, WEAR EYE PROTECTION WHEN GRINDING. Even if it's just your sunglasses that are above the rim of your cap ON YOUR HEAD lol
Glad to see he got weekend leave from detention to help you an when he was trying to talk he's way out of the bad holes he marked reminded me of the cartoon chip monk that never stopped talking till he's buddy hit him
Blame the one who drilled the holes with out messuring center to center from each hole.👈😉👈 Mike on the fifth wheel should of drilled 2 holes on each side of the center hole for 1/8" wall steel pipe 3/4" or 1" ID (for the bolts) to be welded at both ends on the outside grinded flush for added support. It's a little more work but it's much stronger and Captian proof. 👈🤓👍Another tip have some steel blocks of diffirent thickness to put between the cross member and the push arm to lift the front of the trailer higher if the front of the trailer ever bottoms out. Like at driveway entrances that dip down from the main road.
@mikeysgarage3697
2 жыл бұрын
Anti-crush sleeves? They're exactly what I was expecting to see being done.
As always DP always does awesome work. MBTS is out on work release obviously lol. Keep the awesome work up. 👍👍👍👍
The location can be marked perfectly but the hole still has to be drilled in the center of the mark for the hole to be located correctly. Entertaining video!
@DirtPerfect
2 жыл бұрын
True
Thanks for sharing another fun packed video folks. Always a pleasure to see your shows and the humour really makes it pop! See you on the next vid
@DirtPerfect
2 жыл бұрын
Thanks for watching
Your going to like that trailer, we made 1" thick plates to put under the top pins to get more clearance turning off the road into fields or bush roads. We didn't use them a lot but were handy to have when you needed them. Keep smilin
Great job guys!! As always Just do us one favor please and add to the list to "paint the air hose reel"...any color and i mean any color than hot pink. Haha. That's all I can look at when I see this beautiful rig. It's like a hairy mole on someone's face. I can't stop staring at it. Haha but if you love it we can live with it.
I’d think about adding a set of fifth wheel ramps. They’re a lifesaver for dropped low or sunken trailer especially with a lifted fifth wheel.
@DirtPerfect
2 жыл бұрын
Yup no need for my trailers
Transfer punches are much more accurate for transferring hole marks and automatically puts your center punch. If you drill hole small and ream to size much easier than drill bit.
@DirtPerfect
2 жыл бұрын
Yup need some
I think if make the ramps a hang on version. More clearance like the flip up style. Sense of humor will fix anything. You can always flip the cross member over to give more height with the trailer detach as well.
I just love all your crazy comments & laughter!!!
Great video Mr Dirt Perfect and Aaron
@DirtPerfect
2 жыл бұрын
thanks!
DP When I used to run a Murray Trailer, I always dropped it on a pair of 8x8 blocks, when I parked it. This would make getting back under the neck a lot easer. Love the videos.
@DirtPerfect
2 жыл бұрын
Not s problem with this one
It all comes down to honesty and integrity. But it's all good fun!
thumbs up for the garage door cam!! YAY a new toy hauler
@DirtPerfect
2 жыл бұрын
Thanks
Mister Hoover, did that fifth wheel look like it was missing a mounting bolt to you as well???
@DirtPerfect
2 жыл бұрын
Who side you on 🤷♂️
@JasonWorksAlot
2 жыл бұрын
@@DirtPerfect depends is HR around?🙃
I'm sure that you said something before and I just didn't hear or pay attention but a building for the equipment is grand. I can say that you must of passed that snack bar a few time, rolled that quarter in your pocket and said nope, goes for the equipment building. I can see you are going at a really fast pace and so air conditioning or other luxuries are just on hold. I am very happy for you Mike as its a long road to the top. Best of all, your young enough to enjoy. Chris is building and your building.... careful as the economy can flip.... be very careful .,.. I don't want you hurt by it. "A straw in a bottle is damn good"
Great JOB to the both of you💪🛠👍
Wow , I couldn't believe over 12 mpg light and cruising with the ole Mack . That is amazing . Good work , love the channel and glad to see so much accomplishments .
Great job guys Thanks for sharing 👍 👏
MBTS is a good welder, you are lucky to have him available!
This new trailer should prove to be a great asset to your business!
MBTS is prisoner #1 on the DP prison farm. Apparently he's on work release.
Great buy!
Nice job, nice find!
MBTS, he's pulling your leg. Your hole markings were good.
I still think Jerry should start a YT channel. It can be named Man behind the Dozer or the Man behind the bleeps lol
Looks like a nice addition to the fleet...
We love the little orange man. lol
Looking good. Glad you guys get along so well.
@DirtPerfect
2 жыл бұрын
Thanks
Oh my .....all you kids with your fancy hydraulic necks!!!! Back in my day we had mannual detach necks and trailers with stiff beaver tails on the back! You either got good or you fell.off the trailer and had to start over ! Ha ha ha ha 😂 just bustin balls boys !
Nicely done!
@DirtPerfect
2 жыл бұрын
Thanks
I Was wondering when your new detach video would catch up. Kleenan has already dug it 200 miles and were just now seeing it on your video buddy. Dad gum slackers. we know who is the busy guy in the you tube world amongst your group
Great Video ,,a idea on the shop .. if I was going to build it .. drive threw bay for the big rig and trailer hooked up .. rain nights hard to see to back into a shop ..well easy to back into the shop hard to see the open door in the dark night rain ..
😂🤣 Are you sure you two are not related? LOL...love the back & forth ragging.
Another great shop video. I like how MBTS grabbed his unopened beer to move it out of the way but, had to open it and take a drink before he actually set it down lol. Love watching you guys work in the shop. Great video Michael.
@DirtPerfect
2 жыл бұрын
Thanks Tom
here the vidja i been waiting a couple months for. Thanks Dp and Mbts.
@DirtPerfect
2 жыл бұрын
Hope you enjoyed
You men did a good job on this upgrade! You could use this lowboy in a tight spot because you can side load/unload the trackhoe . Good looking trailer. 👍
@duramaxallison2535
2 жыл бұрын
Side loading is terrible for your fifth wheel
Awesome job boys
You guys are awesome! I am glad I found you guys. MBTS give you the right amount of hell to keep you on your toes. Can’t get enough of your videos.
@DirtPerfect
2 жыл бұрын
Thanks
Thanks for the great video Mike!
@DirtPerfect
2 жыл бұрын
Thanks for watching
I would have placed some thick wall tube in to reinforce the bolt holes to prevent any possibility of the rectangular tube being crushed.
@DirtPerfect
2 жыл бұрын
Not had any problems
Great video DP and I was glad to see you get to go down and spend some time with Chris and help him out on the pond but anyway I’m glad everything worked out on your truck and your new trailer and it does look good so you and the man behind the scene stay safe and keep the videos coming
I’ve been teasing you guys for a couple of weeks but I really see Dirt Perfect 🤩 growing and everyone there works hard and has a good time But really a basketball 🏀 goal 🥅
@DirtPerfect
2 жыл бұрын
Lol thanks Dave
Good job guys!😎
@DirtPerfect
2 жыл бұрын
Thanks
Good video great job 👍🏻🇺🇸
the stress on the trailer, point has got to be incredible
Nice work guys. You two are a crack up!
@DirtPerfect
2 жыл бұрын
Thanks
New building!! Oh yes, I'm in on watching a building go up.
Great video, thanks for sharing. Wishing you and your family the best.
@DirtPerfect
2 жыл бұрын
Thank you! You too!
You two are like a couple little girls playing house! Bicker bicker bicker. Love it.
Great engineering & follow through to adjust to your needs for the new to your trailer.
@DirtPerfect
2 жыл бұрын
Thanks
Looks great
@DirtPerfect
2 жыл бұрын
Thanks
You guys sure get after it. Good video as always.
@DirtPerfect
2 жыл бұрын
Thanks
That be a big addition
Really cool new toy for the Captain oh ya and DP.
Loved the banter in this video guys, made for great viewing too bro. Safe travels
@DirtPerfect
Жыл бұрын
Thanks buddy
You both as do all of us have room for improvement.
DP I’m glad to watch your business grow.
@DirtPerfect
2 жыл бұрын
Thanks
Well next time you'll leave your tailgate open on that trailer don't trailer and it won't be filling up with water lineup with water that way when you take off with it you won't follow it till it over hanging the new low boy looks good man looks like he got it just about right about right get you later like
when I pulled Removable Goose Neck trailers we use a 4 x 4 across the truck frame to hold up the goose neck to detach
@DirtPerfect
2 жыл бұрын
That must suck putting that in place all the time you what to detach
Even when MBTS screws up...... he does it to perfection
Don't drill without safety glasses, metal shaving in the eye is not good. Been there, done that.
Saw this on Captains channel and have been pumped every since! 👍🏻
Awesome video 👍
@DirtPerfect
2 жыл бұрын
Thanks
Love the lowboy. Great job.
@DirtPerfect
2 жыл бұрын
Thanks
Looks like a nice trailer. Good video.
@DirtPerfect
2 жыл бұрын
Thanks
A grinder and paint makes me the welder I ain't.. LOL
Very nice job on the modification. 🤙
@DirtPerfect
2 жыл бұрын
Thanks
You guys do some impressive work. Some bushings in those thru holes would have made that adapter a lot stronger, stay bolted tight, and be salt proof. Would have been a lot more work though. Really enjoy your videos.
@wrstew1272
Жыл бұрын
My first thought. More work but……….. easier way would be a 3/8ish filler along side the bolt holes fore to aft welded at both ends and maybe plug welded in a couple of places around the middle.
Great Video
@DirtPerfect
2 жыл бұрын
Thanks
He's worried about the fashion police! 😀
Mike and Aaron great video! You two work well together! Thanks for sharing. Kevin
@DirtPerfect
2 жыл бұрын
Glad you enjoyed it
@sonnyblazer5504
2 жыл бұрын
I agree and thank you as I've ALWAYS seen them as best of buds! Take care!
Hello from the Netherlands . nice camera position on the roll-up door. thanks for the video DP and Aaron good job again guys . Sincerely Hollandduck from the Netherlands
@DirtPerfect
2 жыл бұрын
Thanks buddy
Aaron let's paint numbers on the back of your welding suit. Lol God bless
Hi Mike, my 98 Dodge 4x4 got 13 miles to the gallon with the 5.2 liter engine so that’s excellent gas mileage for your Mack. Mack’s are excellent trucks.
@DirtPerfect
2 жыл бұрын
Thanks
Very good video. Enjoyued all of it. Keep up th good work.
@DirtPerfect
2 жыл бұрын
Thanks
Удачи вам в ваших работах! Весёлые вы парни!😉
Congratulations on the trailer
@DirtPerfect
2 жыл бұрын
Thanks
That's a nice trailer. I want a detach trailer to haul our dozer with
@DirtPerfect
2 жыл бұрын
Yes works good