Welding Trailer Build Pt 2
Ойын-сауық
Welding trailer is nowhere near complete but it is usable now at least. It may be a while before you see this project again but at least I didn't leave ya hanging on it. Thanks for watching!!
Business email: jesse@panicfabrications.com
Check out my website: panicfabrications.com/
Follow my IG: _j_moffitt...
Пікірлер: 43
Nice build going on. Can’t wait to see it finished. I just put a welding trailer together because I don’t have a rig truck anymore. Take care and stay safe.
Another great video. Thanks for sharing. How I always remembered colors for lights there is an “L” in yellow and an “L” in left and there is an “R” in green and an “R” in right. Looking forward to seeing this trailer finished. I contemplated building a rack to mount a welder on so I can put it on my flatbed truck and then remove it if I needed to. Then I saw this video and now it makes more sense to me to build a trailer.
@aydenbrody4258
2 жыл бұрын
instablaster...
Yellow is left- yellow lines on pavement Green is right- green grass ditch side
@johngraves9201
3 жыл бұрын
I always remember it as Yellow has an “L” for left and Green has an “R” for right.
Good video Friend keep up the good work 👍
that welder is so awesome
Nice job 👍
Good work
Good job !!! Only thing that made me a little nervous was the gas can beside the trailer when you were welding. I know we have all done it because we get caught up in the moment, but I still get a little edgy when I see it. I'm as guilty as anyone. Keep up the good work.
Coming along nicely Jesse!!! Do you use a certain tip for the torch to make nice and clean cuts like you did for the tail lights?
@j_moffitt
3 жыл бұрын
For anything under say 1/4" I try to use a 000 tip and go as quick as the cut will allow to eliminate distortion on thin material
Nice build. You may want to reconsider the mounting location of the jack stand. If pulled by a pickup the Jack stand will be in the way of lowering the tailgate.
@j_moffitt
3 жыл бұрын
True
What bout those cans of flammable stuff boom
very neat trailer. how thick of material will that welder do?
@j_moffitt
3 жыл бұрын
I have yet to test it on its limits yet, I’ll go into a more in-depth review here shortly. Should be well capable of 3/8” plate in a single pass possibly more.
I tack stainless bolts by each light on my trailers that way I know they are grounded
What brand is that green welding machine and where did you buy it?
Only 8 min in but, couldn't you weld a bolt to the inside of the tube behind the lights and put a nut on them for the grounds? Also as I seen mentioned I remember trailer wiring as going down the highway, the grass (green) is on your right, and the yellow lines on the road are on your left.
@j_moffitt
3 жыл бұрын
Yes, welding a nut inside is a good idea for the grounds
So what do you think of the forney 220 mp I was considering buying one haven't heard much about them saw your video on it by the way great channel bud
@samchivers621
3 жыл бұрын
I actually bought that machine because of this channel. One of the most honest reviews on it I have found. It seems to be a decent machine so far, no gripes yet. My only complaint is the supplied chart seems off for mig. Maybe it’s just my welding skills 🤷♀️
@chadknotts8377
3 жыл бұрын
@@samchivers621 I own a welding shop and I own all Lincoln welders and always been a Lincoln man but the forney has peaked my interests
@j_moffitt
3 жыл бұрын
No complaints at all about the machine
@chadknotts8377
3 жыл бұрын
@@j_moffitt ok thanks
Why did you put the axle that far back? I'm curious because I'm about to build my welding trailer.
@j_moffitt
Жыл бұрын
To make backing easier
Could you get the tongue weight off this with the welder on it?
@j_moffitt
3 жыл бұрын
It was maybe 100lb
How much in total did it cost you (material wise)
@j_moffitt
2 жыл бұрын
So far maybe 3-400
No views no likes. Damn I'm early af 😂 Wooo
Carefull with the grinding next to your fuel cans. 😬
@j_moffitt
3 жыл бұрын
Kaboom
No suspension?
@j_moffitt
2 жыл бұрын
Torsion axle
@lukej5265
2 жыл бұрын
@@j_moffitt thanks. Also do you know where you can buy metal beams for trailer making?
grinding and welding near a gas can with a rag stopper o_0
@j_moffitt
3 жыл бұрын
0_o
It’s a registry you’re a trailer it must be a real pain in the ass it’s a lot of It’s a lot of running around and a lot of money involved just a registry your trailer I wonder how long it took you to register your trailer just a headache
So you don’t know how to measure
@j_moffitt
3 жыл бұрын
Thought that was obvious