Did y'all know we have *4 channels* now? This main one, plus: 🎮 Evan and Katelyn Gaming kzread.info (us playing games and chatting, enhanced by epic editing and a heavy dose of memes) 🎙️ Evan and Katelyn Podcast kzread.info (chatting about life, KZread stuff, and playing games you can play along with) 😹 Evan and Katelyn Too kzread.info (still figuring this one out 😂)

@bluecurlygirl

4 жыл бұрын

Methinks you have watched Kung Pow a little tooooo often - sweet susie. Such a funny film. I watched it with my son and we were both in floods of tears. Thanks for the reminder - must watch again.. Oh yeah, enjoyed your video too. Evan remembers the high heat material after all the moulds are done. Kinda like the old topic ad (if you ever had topic bars over yonder) "Oh yeah, it's funny how you always remember right at the end". Topic, a hazlenut in every bite. Oh god. It's 3:30 am. I'm ranting. I'm tired. Good night ... sweet susie. I'm gonna be dreaming of kung pow now. Cheers (Heads off upstairs giggling)

@butterfish6785

4 жыл бұрын

I subbed to all

@butterfish6785

4 жыл бұрын

:3

@asentientmonkey4860

4 жыл бұрын

There were many times where I recognized the add-in musics. Tell me... have you used the music from the arcana romance stories? Sorry if it isn’t true...I’m a dedicated the arcana interactive romance story --- I can remembered like every song from it. Sorry if I’m just making wrong assumptions from mere repeating coincidences. But it’s good for you if you like the idea of tarots! *I’m not sponsored btw good taste in music bye*❤️❤️❤️

@Melissa-wo1ck

3 жыл бұрын

Haha I thought from the beginning of this you were going to say children 😂 I’m just slightly disappointed-

Why do I relate to Evan so much when he said “surprise me” but then asked for something specific? It’s like when I hit shuffle on a playlist and then skip until the song I actually wanted comes on.

@AshesAshes44

4 жыл бұрын

Yes! I do a variation on this when making a decision. Flip a coin, then super quick, ask myself if I'm happy with the result. Accept or ignore the coin toss, 'cause I now know what I *really* like/want. Works ninety percent of the time, all the time! ☺️

@lillybrown123

4 жыл бұрын

I read this at 4:54

@leeburge

3 жыл бұрын

Libby and Ellison erm... what? Who even cares..

@lillybrown123

3 жыл бұрын

Sassy Squad cause I read it when he said surprise me I thought it was kinda funny

@Ash-oj3xv

3 жыл бұрын

I can agree to this because I ask, "Should I do this or this?" and they pick one then I'm like, " No pick this one"

These two are the cutest couple... honestly might be the closest thing I’ve seen to soulmates. The way they aren’t afraid to be themselves with each other is beautiful and this is the future I want💕

@EvanAndKatelyn

5 жыл бұрын

Aw thank you! ❤️❤️

@mok0911

2 жыл бұрын

Litraly everyone thinks this

@montialarson

Жыл бұрын

​@@mok0911 *Literally. Spell check is free.

@alexab.7816

11 ай бұрын

@@montialarson but so is kindness :)

“Take off the primary gloves to reveal... *takes off gloves* SECONDARY GLOVES!!” “Wow you are such a cool person

@EvanAndKatelyn

5 жыл бұрын

Very cool 😎😂😭

@mariafrazao9621

5 жыл бұрын

They be goals

"Is it art... yet?" is definitely going on a teeshirt :)

@EvanAndKatelyn

5 жыл бұрын

hahaha! We could totes put that on one of our t-shirts

@shroomie8530

4 жыл бұрын

Still hasn't been made :c

@ghostyplays4049

4 жыл бұрын

@@EvanAndKatelyn you need to put Did you level it? On a t-shirt except the words are crooked.

@leebrown1894

4 жыл бұрын

Yea lol ;-;

@leebrown1894

4 жыл бұрын

Ghostly plays I agree lol 😂 😝

Get a biscuit cutter (cookie cutter you'd call it) and cut the spud (potato) with the gingerbread man shape. Then make some gingercrete people.

@EvanAndKatelyn

5 жыл бұрын

That'd be awesome, good idea!

@quinn.mcginley

5 жыл бұрын

Chrissy B. Then set them in the cookie jar!

@foreverloving5565

5 жыл бұрын

“Gingercrete” 😂

@pip8852

4 жыл бұрын

Quinn McGinley that would be the ultimate prank

@gooddogo8403

4 жыл бұрын

Chrissy B. Gingercrete people!!!!

I don't know why but seeing Evan and Katelyn bond and have fun not only as a husband and wife but also as little kids is so fun and nice to watch. I also love seeing them not argue over anything and just relax and not be tense where other couples and partners fail under pressure is nice and refreshing to see.

I love seeing how much y’all have grown in your knowledge over the years with your craft.

It gets real when you start wearing tertiary gloves.

@EvanAndKatelyn

5 жыл бұрын

Idk if we're ready for tertiary glove projects yet...

@reforzar

5 жыл бұрын

EvanAndKatelyn you’ll get there. #waitforfour

"Dinner time!" "Yesssss!" "I also cooked potatoes 🥔" "R those the potatoes from our video" ...... "Maybe......"

@EvanAndKatelyn

5 жыл бұрын

😁🥔

@Sunflower-ri5ki

3 жыл бұрын

@@EvanAndKatelyn wait was it actually tho im scared for y’all’s health

Everyone : use mold release Evan and Katlen: I know we should but we never learn

@ChaosKeep

3 жыл бұрын

and a year latter still haven't

@Kennachu

Жыл бұрын

Three years later: still the same

@iamjasonong

9 ай бұрын

What's the brand for mold release, can't see it properly at 10:59

New statement for my life: "Don't make me regret you!" Love your channel...great vid!

@EvanAndKatelyn

5 жыл бұрын

bahahaha! thank you!

I need a “This is ambitious?” shirt.

@EvanAndKatelyn

5 жыл бұрын

haha that's a really good idea!

@_mattfinch_

5 жыл бұрын

Yes to this!

@stormyeffects4795

4 жыл бұрын

In tall sizes!

Maybe you could slip cast the mold with clear resin first to form a barrier between the other materials you use to fill them. Might even look ghostly to have the colours set inside the 'gem'.

@EvanAndKatelyn

5 жыл бұрын

ooooo that's a really interesting idea!

@Gobhoblin126

5 жыл бұрын

I was just thinking a similar thing, slip cast with a thin layer of colored resin and then fill with concrete.

"We still have like two and a half potatoes left" -- that's so great. -- Next time someone panics at work, I'm going to say that to calm them down (with zero explanation). -- Also, "(E+K)/Potato" was pretty great.

@EvanAndKatelyn

5 жыл бұрын

hahaha!! it will most likely diffuse the situation ;P

@clarky23

5 жыл бұрын

maybe in a few years E&K will be showing us some tater "tots" LOL

Now I want a vacuum former! That thing is awesome!

@EvanAndKatelyn

5 жыл бұрын

it's so dang fast and satisfying!

@superssaint6689

5 жыл бұрын

Vincent Ferrari riiiight ..!!

@brady_bauer2518

5 жыл бұрын

U can easily make one they are so cool

@niamhharhen7451

5 жыл бұрын

@@brady_bauer2518 what how

@niamhharhen7451

5 жыл бұрын

They are EXPENSIVE

You could try adding the dry concrete as an additive to the resin, so it doesn't have to cure also. That way, it is like a resin pour that can mix better because the water won't be repelling the resin.

@EvanAndKatelyn

5 жыл бұрын

Ooooo that's a really good idea! Would be so fun to try!

@loganiushere

2 жыл бұрын

@@EvanAndKatelyn Problem: Concrete needs water to cure. On a chemical level, the cement needs water to cure.

truly this is my new favorite youtube channel

@EvanAndKatelyn

5 жыл бұрын

thank you so much! ❤️❤️

16:30 is my favorite one!! 😍 Yall should do them again but without the cement and make crystal clusters! Use the same idea of the potatoes but just cut them so they are flush together and appear to be 'touching' so when you do the plastic mold cover it'll look like it's a cluster of Crystal's!

@EvanAndKatelyn

5 жыл бұрын

Thats a really cool idea!

@Ongslay

11 ай бұрын

Reminder!

This was a really cool idea! I think your smaller ones turned out better. My favorite is the small purple and gold one.

I was really excited when I saw that vacuum former, thinking it might be reasonably priced for its size. Spoiler alert: it is not. Back to the DIY plan!

Why is this couple legit the most adorable 😂💖

@EvanAndKatelyn

4 жыл бұрын

😂❤️❤️❤️

I love how you guys always have good music :)

@EvanAndKatelyn

5 жыл бұрын

Thank you! We try!

The most important thing I took away from this is that Katelyn requires more sag than Evan

@pallashouse

5 жыл бұрын

what's sag?

@mattfrazier3115

5 жыл бұрын

Chrissy B. Screen actors guild

@pallashouse

5 жыл бұрын

@@mattfrazier3115 thanks

@RiamiAurum

4 жыл бұрын

@@pallashouse he was joking... They meant the amount of sag that the plastic sheet needed to have in order to melt over the potato

@labby4915

4 жыл бұрын

@@pallashouse r/wooosh

You guys are just the best! I've been struggling with a lot lately and even doing things I enjoy like woodworking have been difficult. Watching you guys has helped me a lot and have given me more motivation to make things!

@EvanAndKatelyn

5 жыл бұрын

Thank you, that really means a lot to hear! I think sometimes you just need a fun low pressure project where it's ok if things mess up (kinda like this one) to get the juices flowing :) Best of luck!

We have the technology WE HAVE THE POTATOES 😂😂🤣😂😂😂😂😂😂

@EvanAndKatelyn

5 жыл бұрын

🥔🥔🥔🥔🥔🥔🥔

@celestialcrystalize8871

4 жыл бұрын

Oh yea! Potato squad!! 😂 🥔🥔🥔🥔🥔

@kitsu8677

4 жыл бұрын

I want that on a t-shirt!!

Way more honest than t.v.

@EvanAndKatelyn

5 жыл бұрын

we do our best to keep it real

Hey so if you can turn potatoes into gems... I could finally be a precious gem! :o

Again brilliant! I learnt so much and may now shortcut my production coz you were both kind enough to share your learning with us, thank you Bob

That mold maker is awesome! I could really use it right now lol... I'm kinda surprised that only one gem broke with mixing the resin and concrete(I don't know the cure time for the concrete). Because, the concrete was mixed with water and resin and water don't usually play well with each other. That may be the reason why K's half resin and half concrete broke. Since the resin was cured before the concrete didn't have much of anything to adhere with. I think if you were to take a low grit of sandpaper to the first layer, the concrete would have an easier time bonding together. Great video as always!!!-

@EvanAndKatelyn

5 жыл бұрын

It's SO fun! Yeah definitely a lot of lessons learned in this video but thankfully the stakes weren't super high and it was fun to experiment 😄

@he-mansuncle7661

5 жыл бұрын

EvanAndKatelyn you should try it with wood, aluminum honeycomb, shredded money, steel and copper shavings, and so much more. The one thing that was really surprising to me was that it didn't look like you had any bubbles!!! How fast does the concrete set? That may be the reason why the two interacted good together.

Congratulations on your Makyu! I've been tossing around the idea of getting one for some time now! I feel like someone could easily make a business just using Makyu/Glowforge/x-carve! Good video!

@EvanAndKatelyn

5 жыл бұрын

Thank you!! Yeah that would be an awesome trifecta for making products :D

@albatrossoflife3416

5 жыл бұрын

Have you had a chance to try the high temp sheets yet? What is the Temp limit on those?

I love how gosh darn creative you two are! It's so cute seeing how excited you both get after making progress in this project. Those potato gems turned out AMAZINGGG!!

@EvanAndKatelyn

5 жыл бұрын

Thank you so much! So glad you like the videos!

Great video you two! I love all the resin videos you guys are making. These would be really neat being full resin and then put an LED in the bottom and just leave the wires hanging out. Would be really cool lights at night. And really easy to make. I’d love to see this in a future video!

@EvanAndKatelyn

5 жыл бұрын

That would make for really cool nightlights!

“Is it art yet?” Bahaha!

@EvanAndKatelyn

5 жыл бұрын

well..... is it?? :P

@Brownstone31

5 жыл бұрын

EvanAndKatelyn I’m sure it is to someone. 😉

@zb361

5 жыл бұрын

Shirt idea!

I've watched several of your resin videos and not only are your projects great but you two are so funny. I had a smile on my face the whole time.

@EvanAndKatelyn

5 жыл бұрын

Thank you so much! So glad you're enjoying them!

Hey you two, LOVE your creativity! Your videos are my pick me up for the day. Never leave the screen in a bad mood after watching one of your episodes. Thanks for sharing your time.

@EvanAndKatelyn

5 жыл бұрын

Aw thank you so much, that really means a lot!

Cut some of the gems in half! I'm curious how the inside looks, cos y'all were poking the middle instead of the outer edges so they prolly lookssuppperrr coool♡♡

Cool! I didn't know there was a professional version of the thing the "sharpest knife" guy did with his vacuum sealer and a heat gun.

@EvanAndKatelyn

5 жыл бұрын

Yeah! Lots of DIY and professional versions out there

I love the look in your face when you slammed the plastic down and it totally worked! Very creative idea for making vacuform objects. I've always wanted to try this!

@EvanAndKatelyn

5 жыл бұрын

haha! 'Twas pure joy after thinking mine was too tall to work

seeing them doing resin without respirators sets off every alarm bell in my head

You guys should use mold release. [:-)]

@EvanAndKatelyn

5 жыл бұрын

heh heh heh heh

no one: absolutely no one: Katelyn and Evan: *RESIN*

I love that you write your dialogue before hand and then act surprised. Like when Evan pulled out that thermoplast sheet and said that you had higher temparute one, and Kate was all shocked!!

@EvanAndKatelyn

5 жыл бұрын

We don't actually write our dialogue beforehand unless it's an ad spot and we have certain points we need to hit or back in the day when we did voice overs

@doubleV4

5 жыл бұрын

EvanAndKatelyn I was trying to be funny and sarcastic at same time. But honestly I love how spontanious you seem!

@EvanAndKatelyn

5 жыл бұрын

Oh haha! Thank you!

You guys are so awesome! Talented artists and your chemistry as a couple is so incredible to see.

@EvanAndKatelyn

5 жыл бұрын

Thank you so much!

4:18 My milkshake brings all the boys to the yard and there like it’s better than yours dam right it’s better than yours

I'm at disneyland and still would rather watch your videos! Keep up the good work.

@EvanAndKatelyn

5 жыл бұрын

That's a big compliment!! Thank you and have fun on Space Mountain 😁😁

@delaneyfr

5 жыл бұрын

@@EvanAndKatelyn we will, that is my family's favorite ride!

@celestialcrystalize8871

4 жыл бұрын

Nice! I'm going to DisneyWorld next year and i hope we have a blast! 😊

I love how fun you two are on camera! This is a great idea for my daughters! They love gems and crystals to play with! Great job!!

@EvanAndKatelyn

5 жыл бұрын

Thank you! Omg, this would definitely be a fun one to make with kids!

I just discovered you guys and you're creators after my own heart! I binged like 20 episodes yesterday....:) Keep it up! Highly entertaining and I love that you guys are so sincere

@EvanAndKatelyn

4 жыл бұрын

Thank you! So glad you're liking the videos!

Me: *sees thumbnail* Also me: “The potato 🥔 is already a gem....”

@EvanAndKatelyn

5 жыл бұрын

❤️🙏 beautiful potato sentiment

Me *puts music on shuffle* "surprise me" *not the vibe I want* "Actually can i get something different?"

I seriously love how you guys are always having so much fun in your videos XD

@EvanAndKatelyn

5 жыл бұрын

Thank you! 😁❤️

Love your enthusiasm. Great job guys.

@EvanAndKatelyn

5 жыл бұрын

Thank you!

Make something this with soap

@EvanAndKatelyn

5 жыл бұрын

it would definitely be possible!

You guys are so cute

@EvanAndKatelyn

5 жыл бұрын

Aw thank you!

You two are the reason I am so glad I gave up cable for KZread. You rock!!! Love your channel!

@EvanAndKatelyn

5 жыл бұрын

thank you so much! we're always so grateful we gave up cable too!

@JeffBitler

5 жыл бұрын

@@EvanAndKatelyn You know, one thing that sets you two apart and above others is that you reply to the comments. That is SO huge! Some KZreadr's don't do that, but we REALLY appreciate that y'all do!

Rewatching young Evan and katelynn. Makes my heart smile

You must let the mold release dry all the way 🙃😆🍅🍅🍅🍅🍅

Hey Evan, Hey Katelyn. Can you please try cold molding? In case you dont know: mixing a metal power (like Iron powder) in a 1to1 ratio to resin and cast it. I think a rusted Coldmolded object would work GREAT with Concrete. I hope you like this Idea! Keep on with your nice work :) Greetings :)

@raraavis7782

5 жыл бұрын

Irish Wristwatch That’s a very interesting idea 👍

@EvanAndKatelyn

5 жыл бұрын

We actually did try that once on Punished Props channel but we'd love to do it on our own! It's so cool!

@wuerfelschmied6906

5 жыл бұрын

Cold casting is as far as I know, coating the inside of the mold with metal powder and then pour the resin in. Black resin is a good base and you can additionally mix in some metal powder. But you need fine metal powders to prevent sinking.

@extreamemineing

5 жыл бұрын

i have only seen that with coating the mold with powder and pouring black resin, i guess that uses less powder but then there is only a thin layer

@irishwristwatch7544

5 жыл бұрын

@@extreamemineing also A good idea!!

this tot me how to turn potato quality stuff into quality gem products. While mixing concrete and epoxy is a solid idea, I like that it spud off and sunk into unexpected results you could resinate with. Keep up the great work!

@EvanAndKatelyn

5 жыл бұрын

Too....many...puns...brain is feeling...mashed

@Pryorfab

5 жыл бұрын

Use your quickcrete to make a bowl for your mashed taters!!!!! #ChristmasDishes

You guys make it look so easy!! I believe that this videos that you guys make will help me with my art in the future thaaannjkkkk youuuu🤗🤗

@EvanAndKatelyn

5 жыл бұрын

Thank you!! Good luck with your future art and projects!

@EvanAndKatelyn

5 жыл бұрын

it's so heavy it would literally take one of us slamming into it to knock it over - it's CRAZY

Hi. May i ask where did you get the table spinner for the potatoes?

@EvanAndKatelyn

5 жыл бұрын

here ya go! amzn.to/2IRLda7

Another fun video 💖 awesome work, you 2 ✨😁 very creative using a potato sculpt. I never knew that was possible

@EvanAndKatelyn

5 жыл бұрын

Thank you! The potato worked out great!

If you ever have children will they also be called beautiful fleshy creations?

@WigantX

3 жыл бұрын

They could start by making glowing resin children

I think these need names :) 15:55 Tropical Sunset 16:03 Coral Reef 16:39 Thanos

@EvanAndKatelyn

5 жыл бұрын

Ahhh those are so perfect! Thanos 😂😂😂

i cant believe you got quikrete to sponser you guys, thats nuts. Grats!

@EvanAndKatelyn

5 жыл бұрын

Thanks 😊

I love you guys. Too fun. I enjoy watching your experiments while you figure it out. It's fascinating to me.

@EvanAndKatelyn

5 жыл бұрын

Haha thank you!!

I love this collab with jacksepticeye

You crazy kids with your myface and your fake geological artifacts. Back in my day we didn't have fancy geode art to hang on the walls. We just had potatoes and we were darn happy to have em ... wait, they are potato's ok, that checks out then. Carry on.

@EvanAndKatelyn

5 жыл бұрын

🕵️‍♀️🔎🥔 hahaha glad everything checked out! 😋

My formbox is literally out for delivery can’t wait to try it. Love the videos

@EvanAndKatelyn

5 жыл бұрын

Ooooo awesome! We are really liking it so far!

This one of those things that I was curious about but was too scared to try. Glad you did 😊 I generally hear that water and resin don't mix but I have used acrylic paint on resin without any issues so concrete was something I was curiousabout. I appreciate these art experiments for you know science lol 😆

@EvanAndKatelyn

5 жыл бұрын

For science!!! Haha thank you, it's really fun to mix things and try new stuff. Cool that acrylic paint works on resin too!

Why u gotta kill my potato family.........I’m watching

@EvanAndKatelyn

4 жыл бұрын

I am sorry! 😭

@Windy_d4y

4 жыл бұрын

EvanAndKatelyn 👀

By just Reading the titel i thougt i wanna do this. Whathever It wil be

@EvanAndKatelyn

5 жыл бұрын

hahaha! Thanks for coming along this adventure with us :P

I love the tiny purple one - it looks like a funky little sapphire

@EvanAndKatelyn

5 жыл бұрын

Thank you!

Katelyn's reactions are always great.

@EvanAndKatelyn

5 жыл бұрын

haha thank you!

Sharpen yer knife.

Lol I love these guys! They are so silly and high energy!! I need friends like you guys LOL

@EvanAndKatelyn

5 жыл бұрын

aw thank you!

it was so satisfying watching the plastic mold over the potatoes

@EvanAndKatelyn

5 жыл бұрын

Incredibly satisfying!

Idk if you guys read comments on old vids or not but this is like the fourth time I’ve re-watched this and I just had a really cool idea if you ever want to revisit something like this what if you coated the mold in concrete and then tipped the extra out so it was just a thin layer of concrete (might have to mix the concrete a bit thin idk how that would work but I am spitballing here lol) and then filled it in with geode colours of resin like how a geode has the normal looking rock on the outside and the pretty colours on the inside? I know you two love your geodes so it would be cool to see!

You guys always have so much fun doing your projects. I really love your positive, a bit crazy attitude. Keep it going guys! :-D

@EvanAndKatelyn

5 жыл бұрын

Thank you!!

Wet Look is a concrete sealer that penetrates the pores of concrete and gives concrete a polished wet-look. it comes in clear and other colors too. I don't know what it would do to resin or if it would even apply to this project, but I love the way it brings out the flaws and details and the over-all look of concrete.

@EvanAndKatelyn

5 жыл бұрын

Thanks for the tip!

Would love a remake of this now!

that was a great project. I wonder what would happen if you tried to put pigments in the concrete to try and make a kind of marble effect. i really love your channel. i love everything you make.

Do this gain, but instead of filling it with resin and concrete fill it with soaps! Crystal shaped soaps are so cool!

@EvanAndKatelyn

4 жыл бұрын

Oooh that would be so cool!

I really like the purple one with the gold 8:00 - looks like the black hole table top, I like it! :)

Hi E&k! My girlfriend and I just found your channel and we love it! Sooo much inspiration! We love to create things and work on projects together. I'm steadily build my arsenal of machines. Currently I'm working on some projects with recycled HDPE #2 plastic. I make motorcycle racing parts and other things like bowls and cups also going to make your self watering plant container soon. The plastic is an awesome product to work with! Very versatile. I make big blocks with mixed all different colors that I then use as stock and machine down to make whatever. I'd love to send you a brick and see what ideas you can come up with. Let me know. Thanks for sharing your ideas! Keep the inspiration and creativity coming!

@EvanAndKatelyn

5 жыл бұрын

Thank you so much, so glad you're liking the channel! We've never tried a plastic like that before... Can it be carved on the Carvey or X-Carve?

@RobCantonJr

5 жыл бұрын

@@EvanAndKatelyn I use conventional wood working tools to shape it after its cooled or shape it in a mould while it's still hot.

You guys are too pure for this world

@EvanAndKatelyn

5 жыл бұрын

You are too kind!

6: 54 KATELYN: I'M FULL OF Resin (Evan recording) KATELYN: (CRIES)

you guys are awsome, 100% earned this sub

@EvanAndKatelyn

5 жыл бұрын

Aww thanks!! 😁👍🎉

This was a brilliant idea even the not so perfect ones were cool! Maybe you could put resin with a layer of crystals or stones in it and then the concrete layer and that would give the concrete a rough edge to cure to.

@EvanAndKatelyn

5 жыл бұрын

Thank you!!! Yes that would be really fun to try

You guys d such cool things with resin.🙂

great work guys. your videos always makes me happy and thank you for that. Btw could you guys do a skeleton resin?? like the full skeleton of a small fish or a plant leaf skeleton and maybe going a bit further with led back light to reveal everything...

@EvanAndKatelyn

5 жыл бұрын

Thank you so much! Ooooo that sounds like it would be really cool

@EvanAndKatelyn

5 жыл бұрын

Aww thanks!! Ooh and that's a cool idea 😀👍

@HobbyRoom

5 жыл бұрын

@@EvanAndKatelyn you are welcome ...😊

When life gives you potatoes make gems!

@EvanAndKatelyn

5 жыл бұрын

our new mantra!

Awesome project guys :D I would love to try doing this, but I would also sand each face of the castings to enhance the crispness of the edges. Love your videos

@EvanAndKatelyn

5 жыл бұрын

Thank you! Oooo yes and that is a good idea :)

Your gems are beautiful! I would like to make molds with the Vacuum Former too! 😄 Oh by the way, i makes resin pieces too and they are a lot of fun!

@EvanAndKatelyn

4 жыл бұрын

Thank you!

I love the thumbnail when the potato is huge and e&k are small

I love how their relationship really revolves around resin 😍🤣😍🤣

These are great moon gemstones!! 🌚💎 What a great experiment!! Mold release for the win!! You guys make me smile!! 🤗😍

For preventing the molds from melting, you could sit them in a cup of water so that the water absorbs the excess heat. I don't know if that would mess with the resin curing process, though. Then call Linus Tech Tips and tell him you've water cooled your concrete potato resin.

So much fun! I love the variations and iterations, each one has its own appeal. Taters are definitely cheaper and faster than 3D printers.

@EvanAndKatelyn

5 жыл бұрын

Thank you! Haha yeah potatoes are way cheaper!