Hey thank you guys for tuning in! If you are new please subscribe and check out our Instagram @fasterproms What an EPIC couple of days! I’d like to do more projects like this. However I don’t have the tuning software for this car and am trying to obtain it currently. Make no mistake this isn’t competition for neighbor that’s what the Caprice is and that will be coming together very soon! Fasterproms builds streetcars and yes I’m busting a little bit on Cleetus but all in good fun, you should see us in the shop....so much more to come!!

@PowerPeraltas

5 жыл бұрын

Fasterproms I love you

@69Dartman

5 жыл бұрын

Looks like everyone was having fun beating themselves silly working away to make things happen. If at first you don't succeed stay up till 4am trying...

@REDBIRD-95

5 жыл бұрын

Great video as always, Jeremy. How goes the banana peel wars? 🤣🤣 You and Cooper are like two peas in a pod😁

@crankemfishing1124

5 жыл бұрын

Are you kidding me you didnt let cletus fabrication do it that would have made this video 😐😐😐😐

@brendangallagher8292

5 жыл бұрын

You should wrap the downpipe and put a turbo blanket on so the power steering line doesn't melt.

So glad that Cleetus got you making videos!!!

@killintimeracing1368

5 жыл бұрын

Me to

@UncleElroy21

5 жыл бұрын

I love the fact his wife is behind the camera being a part of a lot of videos and also always busting his balls 🤣

@todddooley793

5 жыл бұрын

@@UncleElroy21 x2

@todddooley793

5 жыл бұрын

@@killintimeracing1368 x3

@derekrogers3426

5 жыл бұрын

@@UncleElroy21 so does cletus, he has cooper😂🤣😂🤣

I see you throwing shots a Cletus saying “the hood closes” 👀👀

@donaldcurtissjr863

5 жыл бұрын

I actually caught that lmfao

@Fasterproms1

5 жыл бұрын

All in good fun! Street car not race car

@delisasadventures6609

5 жыл бұрын

Hahahah Cletus always says street car and has no self-control LOL everything he owns will eventually have fat slicks giant turbos and run eights

@donaldcurtissjr863

5 жыл бұрын

Or jet engines

@seanmartin2382

5 жыл бұрын

Street Car!!!!! With a turbo exhaust dump in the front fender..... lol love it

I'm so happy what I sent could be put to use!! I hope the car was a blast to work on and I hope you do another Ford in the future. I also hope the radiator made it in 1 piece and you can make some good power in the next video!! Jeremy, you're such a great guy and it was a pleasure to talk to you on the phone. KZread is a better place with your channel and your content.

I saw all those parts and what immediately came to mind was Johnny Cash's song: "One Piece At A Time" 😁😁🤘🤘

@chris77777777ify

5 жыл бұрын

What is the music in the video thou?? Do you know bro ?? Sick beat.

Ya mean your not gonna have Cletus weld them pipes!?!? Lol😂

@Readmypost

5 жыл бұрын

Mcfarland machining is backed by over 3 years lol 😂

@carlosmeraz9469

5 жыл бұрын

@@Readmypost Mcfarland Fabrication*

Wish you could teach cleeter how to put a hood on a crown Vic......or vette

@akumakazenoryu

5 жыл бұрын

upvote this... Now

@Hellpoolhall

5 жыл бұрын

Hoods are not required where they go....

Can't wait to see dyno numbers. A before and after will be cool

Incredible work! Love your videos. Tech, fab, horsepower and no bad attitude or ego!

We do not take you fellas for granted. All subscribers including myself thank you for your extra time and passion. Sometimes money is not enuf, but your dedication is not overlooked. I appreciate each of you to the fullest. Thank you.

This channel is doing awesome work. Glad the shop is working out. Everything has been great since you and garrett made the move

Jeremy I love your videos. You always take the time to break things down for the viewers so that we can learn and grow as builders, drivers, and hobbyist. From all of the Kyle's learning and trying to build something cool in their garage, THANK YOU!

Heyyy you signed my timing cover “FatherTiming”

How long until James pulls a nos bottle out and spraying direcctly into the turbo? LoL

@dylanzrim1011

5 жыл бұрын

Brad Clapp when they have a cam that won’t blow all the boost and fuel out the exhaust mid stroke

@mikeedward2827

5 жыл бұрын

@r7 Kelley the cams that are in it have too much overlap for boost. It'll work but I'm sure they'll be switching them out in an upcoming video 😉

@bradclapp4022

5 жыл бұрын

@@dylanzrim1011 I'm not a car nut so I wouldn't know that, but I do know James well enough to know he wouldn't hesitate to do that lol

Kudos for keeping the hood.

I wish people understand that what y'all did here is what makes cars so fun...a bad ass build with your buddy's !!

@79tazman

5 жыл бұрын

I understand it very well because I know all about it been doing it for a while now making cars faster is what I love :)

@rickyscz28

5 жыл бұрын

@@79tazman amen brother!!!

@joshabbott1296

5 жыл бұрын

Murica!!

@rickyscz28

5 жыл бұрын

@@joshabbott1296 that's right !!

@KyrieEleisonMaranatha

3 жыл бұрын

I'm about to do this exact thing to my town car this weekend. 😁

Huge props to you team for staying up all night! Thanks for the great content!

Good seeing Josh and crew. Nice work.

No test drive? It's not over until you test drive it. Gotta GIVER HELL!!

Love seeing how loud and rowdy George is now! He seemed so quiet and shy here 😂

I say if the motor goes pop get an eco boost out of a wrecked f150 that would be interesting to watch.

@JohnnyAnderson1

5 жыл бұрын

One Sleventeen but they sound so horrible

@onesleventeen4860

5 жыл бұрын

It’s something different and something no one else is doing and I have seen them hold 900hp.

@karlhopkins713

5 жыл бұрын

@jon doe And r35s sound like garbage

Car looks great. Is there an update on the sleeper truck? Been a while for that thing.

That turbo system is a real shepherds pie, great job turning nothing into something. Time to make some power!

Awesome build.. love how you tucked and crammed everything under the hood in that little space & modifying the rad support plastic cover/shroud where the pipes run threw it. Amazing work you and your team did. Now thats what you call "keeping it Clean keeping it Simple" You got 1 hell of a sleeper, cant wait to see it tare up the streets

The Josh guy is doing some good work!

I love how you custom fit the intercooler pipes through the radiator cover panel, that to me really completes it

When you are beyond exhaustion and everything is 1000% the funniest thing you've ever heard. Been there many a times.... Good Job, boys!

Definitely the most dope thing u have done on this channel so far! Great job

I like how honest you are and said 1 day and a half instead of lying and saying only one day for click bait.

You and your crew did a helluva job! I'll be waiting in anticipation for the next installment!

Great job on the build guys. Good to see you building that platform. Can wait to see you tune her up and 'Make some Power'!!!

Good crew and good ideas...you are in high cotton now with tons of happy viewers! Thank You for sharing from Georgia and happy viewers too at 4:02 AM!!!

One of the best channels out there!

@paulnoecker1202

5 жыл бұрын

Evan Hall for sure.

@evanhall19

5 жыл бұрын

Between this channel and Cleetus, I'm pumped up enough to do a Turbo LS 68 C10 stepside!

Great 👍🏼 I’m impressed on how the whole thing came out in such a short time hope it runs as good as you’re hoping looking forward to some smiling veterans GOD BLESS EVERYONE

Best vid ever from fasterproms

Would you guys ever consider making another set of piping for a crown Victoria? I’d love to turbo mine. Unfortunately I do not have the tools or the knowledge (cutting, welding) to make my own. I am local in Florida and would even come pay you face to face in cash!

Awesome job guys 👍 Great to see Neighbor get a friend to play with 👏

All I can say is thank GOD you have AC. I just left Tampa and it was so damn hot down there, then I return to PA and we're under a heat warning with highs of 96 and 98...

@bryanroupe8646

5 жыл бұрын

Shit it was 107 here in Ohio yesterday. But people if Florida are nuts. I use to see people wearing hoodies when it was 100°.

@79tazman

5 жыл бұрын

I know it's brutal the humidity is killer here in Michigan it's like 84 with 104 humidex

@karlhopkins713

5 жыл бұрын

@@bryanroupe8646 I'm from pa and can confirm it was 107 here as well with the humidity.

@randyms3830

5 жыл бұрын

I'm In pa also and at 5pm when i left work my dash said 106.

@zxggwrt

5 жыл бұрын

Yeah I'm not even going outside today to work on my boat distributor here in NC. Hot and muggy. Awesome job keeping the AC!

Personally I don’t get all that excited about compression test numbers as long as they are relatively equally, to me what is far more important is what cylinder leak-down percentage numbers are. On a side note it always baffles me why anybody would work on their knees when working in a shop, hell I question anybody working on the floor even under the old shade tree. PS scrap is not Junk only Junk is Junk. This built will certainly be interesting on how well it performs much less if things like the A/C ever has a chance of working or if the coolant tank melts even with the heat shield. That said I like the fact everything is below a flat stock hood. One parting thought Turbo Build a Day and a Laugh, Tuning the Crown Beast ????? Or AKA The Fun has Just Begun!

Your channel is the only one I've ever bought merch from. Thank you for keeping the hood!!!!

Congrats you guys did an amazing job I'd love to see that in person

You installed that turbo way wrong man, you forgot to attach the LSX.

@Adrianzx

5 жыл бұрын

I started a go fund me for an LS swap on my vic

@freedomfox8183

5 жыл бұрын

@@Adrianzx why? If you cant afford to build or buy one yourself your not ready to have one

@Fasterproms1

5 жыл бұрын

Hahaha soon enough I’ll be getting a job to where I belong.

@RicardoPCGamer

5 жыл бұрын

that 4.6 has potential don't worry. I remember when cleetus tried blowing up project neighbor on the dyno, and he blew a hole into the intake instead of the engine block. He sprayed over 1000 shot of nitrous into it and the dyno went into the negatives because of all the insane power.

looks and sounds great. im ready to see you start back on the s10

Hey buddy that big support you cut inbetween the two frame rails is a pretty crucial one when it comes to frame flex on these late model vics. I'd suggest running a tube across the top and bottom, where you can fit one to serve the purpose that previously did. I have a TVS, coyote swapped 6 speed vic, myself.

I'm not much of a Ford guy, but both the Clickbait Patrol and the Crown Vic sound so much meaner than the Chevy's in the shop. That growl gets me every time!

@MarkVaughnLive

5 жыл бұрын

Also, video starts at 25:46

In my opinion, this is probably your best video yet.

Lookin like neighbor got some competition. I really enjoy seeing nice installs. Fasterproms is showing off. Wish you guys the best of luck. Get her Norman!

@Fasterproms1

5 жыл бұрын

Not competition for neighbor. Just a budget build at mid power that someone will be happy with.

@gat6186

5 жыл бұрын

@@Fasterproms1 i was being sarcastic lol i understand neighbor got the heart of a GT500. Anyways enjoyed the install video.

Damn man. This thing is absolutely sick! You are friggin awesome dude. Keep on doing what you do, I love watching the craziness that comes to fruition

Some 17x4.5 and 15x9 Black chrome RaceStars would look so good on her! Great job guys.👍

For the love of all things panther platform someone please donate this man a honeycomb grille,that faded bar grille is atrocious. 🤮🤮 I would but every Vic at the bone yard is front end damage. 😭😭

@hikdingle2210

4 жыл бұрын

Honeycomb suck brah

Can you get a close up of those welds? They looked absolutely amazing

that was defiantly a lot of commitment! I really enjoyed watching. Norman can probably tune it up for you.

I haven’t been this excited for a follow up video in forever. This is awesome!

Jeremy. Your 100% enthusiastic attitude keeps me watching your videos. This crown vic turbski vid is amonh yout best yet. Probably the lack of sleep but keep that shit up bud. You too laz and George

Wow that is one hell of a turbo ‘kit’, all those pipes!! Great work fellas

What better to do at 3 a.m. then watch you guys turbo that beast!

That was awesome to watch, and lots of fun. Can hardly wait for the next episode. Thanks guys!!!

I was really confused as to how it started and ran on 45 psi compression until someone brought up the throttle body being closed. Garrett reminds me of myself at that age if I had had money, and you are the neighborhood mechanic who helps kids out of tight spots while they learn. Keep up the good work. I still catch myself pushing the gas pedal one time to set the choke...lol

I do leak down tests more important than compression tests that can fool you

@Fasterproms1

5 жыл бұрын

Dennis Sastini indeed. Just a quick precautionary measure.

@VasilyBuilds

5 жыл бұрын

@@Fasterproms1 Don't you have to open the throttle blade WOT? I heard it messes the reading up if you don't

@Bdoyle909

5 жыл бұрын

you really should do both, if you have a valve barely opening it will pass a leak down test but fail a compression test because if you cant move the air in or out you have nothing to compress. in reality you should do both if you can

SICK intro!! That was awesome!!

Hell yeah! Crown Vic gang!

Can't wait till the ford motor grenades so we can get back to the real power making machines.. #chevypower #LSX

@RSDX99

5 жыл бұрын

Really like the Coyote and the soon the be Coyote copy in the new Vette.

@fastmaros

5 жыл бұрын

@@RSDX99 fuck that pusstang coyote turd.

I thought Brisk made ice tea, not spark plugs. "That's Brisk baby"

Thanks for the Video..... Well a new direction ....Fasterproms Fabrication....without any interference from McFarland Fabrication....Ya. As Derek over on Vice Grip Garage would say.... "That's Factry". What a great install....and the hood closes....truly professional.

You've motivated me to go practice my welding, after I watch the rest of this episode of coarse. Thanks for sharing and as always keep building👍

Wow great job Jeremy! You have a great group of talented guys working for you.is that a 2v modular 4.6. Ford?

Nice build!! Your CREW does really nice work!! Cant wait to see this thing Roll.... As always the DOGS steal the show LOL

The car is coming along nicely. Another great video 👍

Major Favor got himself a whirly boy

BadAss , big shout out from Troy Alabama !!!!! Can't wait for u to show Cleetus off !!!!!!

Awesome work guys!

It has a hood, Love it! So much work but it should be worth it!

Was the throttle body open when taking compression numbers?

@christiangraham4579

5 жыл бұрын

Jason Myers lol what?!?!

@CoHxUnLoaDz98

5 жыл бұрын

I second this, the first time I did a compression check on my truck I didnt hold the throttle open, I re did it and all the numbers jumped up about 30psi

@jasonmyers8644

5 жыл бұрын

@@CoHxUnLoaDz98 Yep

@msengineeringdavid3702

5 жыл бұрын

Stupid question to ask guys like these they aren’t stupid man. 🤔

@CoHxUnLoaDz98

5 жыл бұрын

@@msengineeringdavid3702 no they arent stupid, but neither am I. I think he even said it was his first time doing a compression test, and that is something very easy to overlook

Really interested in how you are going to tune it. I have a turbo Ford project of my own and purchased SCT tuning software. Still have a bunch to learn

@toodanderson351

5 жыл бұрын

I think he said hp tuners is working on it.

Man you should've took a page from the diy turbo ls guys. Pull the passenger side manifold and cut the front off of it. Weld a 2.5 inch v band onto the front of the manifold. These new manifolds aren't like the old school cast. You can actually weld them. Then you reinstall your manifold upside down and you can connect the drivers side exhuast to the 2.5 inch V band you welded onto the passenger manifold. You could've tucked all of the exhuast up above the crossmember like stock.

I'm not a fan of the crown Vic, but this build is turning out to be bad ass. Props to your team for being able to achieve an incredible feat in only one day!. Keep up the amazing work fasterproms 🥳

I think it’s so cool that you the tuner is designing the turbo kit! Always different outcome when the guy with the end game knowledge is doing the actual work. Kinda like me a test and balance guy installing an HVAC system.

Awesome sleeper Bro!

Clean,functional, and looks just amazing! Great job guys

Better have a video on tuning and running it tomorrow ! Love the build, great work guys and keep up the great content !

I used this video as a template on turbo charging my 03 mustang gt on a budget. Awesome sauce

It's nice to see you doing a turbo build. Finally growing up.

Jeremy you might need to get your boys to give cleetus some welding lessons damn

Crown Vic’s FTW!!

Epic build by a very talented crew! I can't wait to see more. But does it close the hood and put lotion on it's skin? Edit. Get some aftermarket headlights from LKQ, lifetime warranty on yellowing and moisture.

Awesome! Can't wait to see this thing on the strip! Also, not sure if it was me(headphone user), but the sound was way off. Your voices were kinda quiet, but the back ground hiss was super loud.

Now that's a bad neighbor😂😂

awesome video man can't wait until you see how much power it puts out now

Subbed! Only KZread channel I literally watch every video on is Cleetus. I do not know why I never thought to subscribe to you to but glad I did now. Keep up the good work Jeremy

Now that you have the boosted crown, you should race the boosted bois new mr2. Just good entertainment.

Well done guys!

Sweet turbo. That old girl will be blowing spark plugs out in no time. Ye haw

Cant wait to see what numbers it puts down!!!

Giving the plugs a plug, I like it!

You need a coolant tank from a 97 crown vic. The coolant tank on those was located near the firewall on the passenger side fender. You should see 3 nubs on the inner fender, that's where it used to mount.

Looks and sounds awesome great job!

That that is badd ass Cant wait till to see the dyno numbers

Love these kinds of FULL Boggin build videos!!

Do you have a build spec sheet anywhere online? I have a p71 ive been daydreaming about doing this too but setup wise im not sure what would be correct.

Way to fit it all in there guys, excellent fitment/fab work to get the hood to shut and it sounds even better than it looks.. Cant wait to see it on the dyno and then the street and making some Vet's smile. : )