Crazy what you're able to do with the tune when the owner makes sure it's ready to be tuned. Nice job. Clean car, awesome power and you can see the difference in excitement when you aren't having to fix everything.

Love the content, keep on bro! MUCH love from Cali!!

I love that people bring you absolute junk builds and you fix em up best you can. Then there's this guy that watches the channel and checks over his car before bringing it in 👍

Love the content brotha! Awesome Tuning!! 🤙🏼💪🏼🙌🏼

That little single jingle has some balls!🔥

I love the content! Especially this build!!!!! I have the same exact build minus the intake manifold!

I literally just got off the dyno with a customers single cam .. what a fun tune man

i needed this mane

Clean set up!!!👌

Man that things was jamming single jingle all day great work guys

@Brock_Landers

3 жыл бұрын

I had alot of fun with my single slammer. I had a JDM D15B 3-stage VTEC with a D16Z6 head that was freshly rebuilt with an eBay turbo and it was fast enough to edge out modified WRXs and Mazdaspeed 3s at the drag strip, but it wasn't what I would call fast nowadays. It never failed to bring a smile to my face. When I went B series I sold that engine to my best friend and he put it in his EJ1 coupe with an old Ford Thunderbird turbo with a Bisi cam and it lasted for YEARS until he sold it to some dude that pumped the boost pressure up to 18 psi and blew a rod out the back of the block for fun.

Same here. Wish he would disclose so hunter could let us in on the magic jam cam

Great job on a great customer car my guy!

As a single cam guy. I would also love to know which cam he has.

@danielhaynes1642

3 жыл бұрын

I make 409 on a z6 at 20psi. Using bc stage 2 turbo cams and a 75.5 vitara built bottom end

@danielhaynes1642

3 жыл бұрын

It spins to 8600...

@89hybrid88

3 жыл бұрын

I personally have a d16y7 with a z6 head and a badguys stage 4 cam. Hopefully I will see similar numbers.

@89hybrid88

3 жыл бұрын

I personally have a d16y7 with a z6 head and a badguys stage 4 cam. Hopefully I will see similar numbers.

@jarrodmartens1069

3 жыл бұрын

I love my new ride.

340 whp sounds about right for a healthy Y8 with an eBay turbo at 15-16 psi. My freshly rebuilt B18B1 made 409 whp at 15 psi with BC cams on an eBay turbo.

Thanks for this really cool information video I can use as a tool for my build bro

That civic is miiiiiint 👌 nice job!

I really enjoyed the video I'm hoping that I can get that kind of power out of my Y8

Dude another great single jingle..

WOW

Can you make videos about how to wire up switches to the hondata s300 for hi/lo boost and data logging on the fly. There is tons of hondata videos on KZread but nothing out there on how to wire the features.

Definitely can't wait to boost my single jingle... And build my other block for hp numbers like this.

@PookieBuilt

9 ай бұрын

Get it done brotha?

The throttle issue is probably the throttle actuator flange catching on the skunk manifold. I had the same issue myself.

Man over 400hp on 24 psi. Really got to ask the owner what camshaft is in it.

That's a monster

I am just about to finished putting together my 75.5 Vitara Z6/Y8 head build. Very very similar to this build, hoping for similar results. #SavetheSOHC #SINGLEJINGLE

@livindaunderground

2 жыл бұрын

We're the results good or?

Do you use a z6 timing gear and use z6 ignition maps to tune a y8? Is it true the y8 doesn't like timing like the z6?

Building a d16y8, should I use the y8 crank or another crank I've hear the y8s spin bearings like nobody's buisiness I have an a6 crank laying around it has the cross drilled oil holes. Is it as bad as they say or is the y8 crank fine?

Single jingle has some big ole balls

Shits clean af

Not sure if you mentioned it, but were you using the quick spool feature in the hondata?

Increíble estoy armando un Y7 N/A y quiero seguir con Un Y8 Turbo de eBay alguna recomendación mirando tu video quede impactado por el HP que dio enserio algún consejo y otro dato tienes un nuevo subscriptor

She’s a ripper! Good job! Where in wi are you? I was by grate lakes last week

Woow men! That’s insane! What set up are you using?

I can' belive this engines are 25 year old 1.6 litter engines and we still chose them

I'm in the process of building a D16Y7 with the Y8 head swap, I will be setup very similar to this. I will be running all forged internals and a GT45 turbo with 1000cc injectors and many more mods... After seeing your video I know know that I will need 2200cc injectors and a bigger if not dual fuel pumps!!!

@melissamares-salinas9465

2 жыл бұрын

Ya definitely was about to say with that size turbo ur gona need sum much bigger I injectors for that thing ig you wana see it really move. a walbro 450 should do sum good sounds fun good luck 👍

@gunnerv12

11 ай бұрын

how complicated is the y8 head swap on the y7

What pistons or C.R he runs?

best place to live

Would love to know what cam it has

only thing these dyno videos are missing is the build sheet for the engine :) whats in there?!

When I think of a sleeper I think of a giant cut out bumper and intercooler twice the size of the stock radiator, lol.

Yes i have a single cam as well, would love to know which cam is in it! 😁🤘😁

Quick question, I have a 00 ek coupe with a d16y5. It’s got skunk 2 intake manifold and 70mm throttle body. Fuel pressure regulator and exhaust. Just got a cxracing turbo kit. This is my first turbo build I’m wondering is it necessary to buy vitara pistons and all that other stuff. Or can I run it on stock internals , im aware that it could mess the engine up bad lol but Right now I’m getting arp head studs. Would I also I need springs and retainers? I’m new to this whole Boost thing lmao. Any info would be much appreciated. Love the videos , really teaching me a lot, keep up the great content👍🏻

@Course5Tuning

2 жыл бұрын

Just use a small Wastegate spring until you get internals.

What turbo is that. Some build specs would be great

Is this a stock internal engine?

Need some 2step videos or just something with 2step 🤣🤣🤣 💪🤙👌

I have just about the same build plus a few more things ...I would love to know what cam it has.

@Xactox

3 жыл бұрын

Same here!

@gingersquatch9844

3 жыл бұрын

Me too!!!

What was his engine build ?

Working on my 4 door I'm gona build my d16 then ima work on my k swap build. 🙏

Build a rallycross car, or even a Stage rally car, I feel like you would have alot of fun with either. Has to be a Honda, if you go stage route I can get you in contact with a codriver with Civic codriving experience, he's a good codriver and almost beat all the turbo awd cars at sno*drift in an Ek civic.

@gemstar9523

Жыл бұрын

How does one get involved in stage rally ? Keep in mind I’m in NY

Till this day I still wonder what cam it is

Definitely a crower cam.

11th from the UK.

Speedfactory cam??

I wanted to see some street pulls. Why do you never do street pull videos with your customers? Just wondering.

@HunterTuned

3 жыл бұрын

I should start to do it again I just never have my go pro with me which I prefer for in car stuff

@b4nger56

3 жыл бұрын

think it would be cool to sit as a passenger in the customer car and let em rip it for the end of the vid and keep a collection

Did ya ever find out what the cam was¿

I bet this sedan boogies on the street

You should turbo a Daewoo

I want to see a d2b setup

Your supposed to set ignition timing to 12 on y8 engine. That tune is gonna blow up the engine

Does he have tint up front and clean it back? Nice, priority's, tune over looks, lmao

@89hybrid88

3 жыл бұрын

Damn right

I have just boosted my d16z6 I have one of those tial knock off blow off valves and its jammed itself open already... Has anyone had this problem? Is there a fix or should I buy genuine? Many thanks Good work as always Hunter!😁👍

@tannerharkey

3 жыл бұрын

It’s happens on those, I suggest disassembling and checking out the diagram inside to see what’s catching and holding it open. But bov are pretty cheap regardless

@MrZeroLag

3 жыл бұрын

@@tannerharkey yeah I'll do that. If it jams again it will have to be replaced. Thanks

@tannerharkey

3 жыл бұрын

@@MrZeroLag right on, is it bleeding off all your boost how it is?

@MrZeroLag

3 жыл бұрын

@@tannerharkey It doesn't seem to be strangely... I only just noticed it as I heard a air leak, checked and there's a 1/4 inch gap with the sealing ring on show.

@HunterTuned

3 жыл бұрын

Take it apart and dissect

I know you said you needed some injectors for your store.What type of injector and from what what vehicle? I will be in the junk yard this week.

@HunterTuned

3 жыл бұрын

99-07 silverados,tahoes,suburbans

Is that a vitara build? Idk if you mentioned it but I’m assuming it must have pistons,rods,camshaft and valvetrain? That thing is a beast for a single cam!

@v36vhr

3 жыл бұрын

I'm curious myself. I have a very similar build . I need to get retuned on my cam and e85

@hseriesonlymonctonnb1181

3 жыл бұрын

It’s most likely stock crank it’s probAly springs retainers pistons and rods maybe cams ive seen vitars build do 500 whp on e85

@mihailpetrovici5044

3 жыл бұрын

Maybe it doesn't have Vitara, maybe some other pistons with higher compressiob

@hseriesonlymonctonnb1181

3 жыл бұрын

@@mihailpetrovici5044 I don’t think it is I was just using that as an example I’m gonna say 11:1 if I had to guess but my buddy has a d16z6 weisco 9.5:1 pistons eagle rods and super tech head stuff that I tune that made 350 whp on 91 Canadian fuel witch is like 89 in the states

@HunterTuned

3 жыл бұрын

Vitara pistons speed factory rods

Is the gearbox oem?

@jarrodmartens1069

3 жыл бұрын

Short there shifter stage 5 clutch.

which rims are those

@schafer240

2 жыл бұрын

01-05 civic

u and wife wil love it here

WOW. That is all lol

i never should have sold my ek sedan 😔

Has anyone tryed speed factories Street savage camshaft? I’ve yet to see people run it. Looking to pick it up for my build!

@brianrucker3376

3 жыл бұрын

I have one in my ek coupe hoping to get tuned next week

@juangarnica1879

3 жыл бұрын

@@brianrucker3376 keep me posted, wanna see what it can do

@brianrucker3376

3 жыл бұрын

Will do

@schafer240

2 жыл бұрын

@@brianrucker3376 I have one as well, motors not in yet. How was your results?

@brianrucker3376

2 жыл бұрын

@@schafer240 327hp 286tq

cape town

How much timing at that 24lbs? Thats crazy power

@cyz98xu

3 жыл бұрын

It will be nice to know 🤔🤔

Where is your shop I literally need the same build 🤣I should have my turbo kit and all in at the end of the month

Loop

Why don't people wire the O2 in the ecu so you can tune easier?

@HunterTuned

3 жыл бұрын

I can tune just fine without it in the ecu but yea can be nice to have on the ecu too

@mihailpetrovici5044

3 жыл бұрын

@@HunterTuned it just needs a wire with a pin to be put in the ecu plug, right? I mean, you don't need any specific tools

Skunk 2 cams aint making that much power and still maintaining drivability

@81morrow

2 жыл бұрын

Lol wrong .

i l;ike u north is world war u need to come to cape townmother city butiful no snow

First????

Css block?

@jarrodmartens1069

3 жыл бұрын

Yea I think just picked car up and had cars block stickers.

@jarrodmartens1069

3 жыл бұрын

Css

@schafer240

2 жыл бұрын

@@jarrodmartens1069 Do you know what cam it is running? A stock idle would make me think street savage, but I know you need a cam gear with a y8 to get the timing properly back to 0 degrees

@user-wq3qg1gz6b

3 ай бұрын

@@jarrodmartens1069do you still own the car