#goals Appreciate the time taken to film as always. ❤️ We appreciate the time taken.

@PaulDaFox

Жыл бұрын

Thank you so much brother, we really appreciate the kind gesture! Were super grateful and humbled!!🙏🙏

@sallydafoxfitness

Жыл бұрын

We are super grateful @CHEESUSKREIST we truly appreciate you and being here to support our channel and foxbody community 🦊❤️

@PaulDaFox

Жыл бұрын

@@sallydafoxfitnessThanks Sally for replying to Cheesus as well 🙏🏼😍

Awesome video brother. Thanks for sharing. Awesome tips. Keep the content coming. Hope you have an incredible day. Much love to you and Sally. RESPECT

@PaulDaFox

Жыл бұрын

Thanks Tim, we try our best and certainly appreciate all your help and support. Much love and respect right back at you💯👊🏼🦊

Nice notch Paul!

@PaulDaFox

Жыл бұрын

Thanks Rob, have a great night!! 👊🏼🦊🏁

@GearheadRob319

Жыл бұрын

@@PaulDaFox you to my brother.

That's an awesome stance nice job!

@PaulDaFox

Жыл бұрын

Thanks brother Travis!! It’s a small little touch but it does make a difference 💯🦊👊🏼

The stance is 💰💰😆

@PaulDaFox

Жыл бұрын

Thanks TFS, have a great night!! 👊🏼🦊🏁

Love the stance!!

@PaulDaFox

Жыл бұрын

Thanks Matthew, have a great night!! 👊🏼🦊🏁

Stance looks perfect👌🏼

@PaulDaFox

Жыл бұрын

Thanks Devin, have a great night!! 👊🏼🦊🏁

Gorgeous Notch 🤩

@PaulDaFox

Жыл бұрын

Thanks Tony, have a great night!! 👊🏼🦊🏁

Beautiful car man!! Makes me miss mine. I use to have one identical to yours. I still have a 89 coupe drag car and a 92 black on black LX hatch. Love these foxes!! Thanks for the videos!!

@PaulDaFox

Жыл бұрын

Thanks brother, you still have 2 foxes so your good!! Really appreciate you watching, have a great night!! 👊🏼🦊🏁

Awesome video, really great tips on setting the rear weight before dialing in the height. Stance looks great!

@PaulDaFox

Жыл бұрын

Thanks Eric, appreciate your comment and for you watching, have a great night 👊🏼🦊🏁

The stance is right on the money Brother! That is a really sharp looking coupe! I love the name 😂. Have a great Sunday Paul 👊🙏

@PaulDaFox

Жыл бұрын

Thanks brother Mark! I just just changed the name as I didn’t realize that brew2l had a project carbon fox already (which I didn’t know) so I went with “Nite Fox” now which I also really like!! 👊🏼🦊🏁

Any little adjustments makes a big difference. 🙏 for the video Paul.

@PaulDaFox

Жыл бұрын

💯 brother, small touch = big difference. I have a few more to go. Say hi to Dee for us, have a great night!! 👊🏼🦊🏁

Amazing looking coupe 💯

@PaulDaFox

Жыл бұрын

Thanks Jason, have a great night!! 👊🏼🦊💯

Car looks 👌. Like that rear set up, makes things so much easier to tweak the ride height.

@PaulDaFox

Жыл бұрын

Thanks Dave, those adjustable spring is certainly pretty kool and makes it easier to dial in the stance 💯👊🏼🦊

Love it, that’s a beauty 🤙🏼

@PaulDaFox

Жыл бұрын

Thanks Johnny, have a great night! 👊🏼🦊🏁

Nice clean coupe. I love chrome ponys.

@PaulDaFox

Жыл бұрын

Thanks brother, I like the chrome ponies as well; its a clean, classic look 💯🦊🏁

Looks great 👊👊

@PaulDaFox

Жыл бұрын

Thanks Paulo, have a great night! 👊🏼🦊🏁

Beautiful foxbody Paul.

@PaulDaFox

Жыл бұрын

Thanks Bama, appreciate that! Have a great night!! 👊🏼🦊🏁

🔥🔥🔥

@PaulDaFox

Жыл бұрын

Thanks Roger, have a great night!! 👊🏼🦊🏁

That is one sexy car! 😊

@PaulDaFox

Жыл бұрын

Thanks Cheesus, trying to make it even sexier with some simple touches. Thanks again for the Super Thanks🙏🏼😍🙏🏼

Love this car !! It’s So nice ,sounds awesome and the flake in the paint is incredible!! 👍👍

@PaulDaFox

11 ай бұрын

Thanks brother Ryan, really appreciate that🙏🏼💯🏁

Cars sitting perfect now..looks great 👍🏻

@PaulDaFox

Жыл бұрын

Thanks again brother!! 👊🦊🏁

What a beautiful Mustang. 🔥👍

@PaulDaFox

Жыл бұрын

Thank you so much! Appreciate you watching; have a great night!! 👊🦊🏁

The paint really pops on it!

@PaulDaFox

Жыл бұрын

Thanks Mike, the paint is really good on the fox and love that it looks different depending on the lighting. Have a great week!! 👊🦊🏁

GREAT video Brother Paul!! I really like the naturalness and raw quality of this video!💯 She is sitting super nice now and I love the name Carbon Fox!!💯🏁👊🏾

@PaulDaFox

Жыл бұрын

Thanks brorher James! Sometimes it’s hard to work and record but I try my best. As far as the name, I switched it to “Nite Fox” as I didn’t know brew2l had a project carbon fox going already. Have a great night!! 👊🏼🦊🏁

@ogsuperflygarage

Жыл бұрын

@@PaulDaFox I like Nite Fox too! It’s a fitting name! 💯🏁👊🏾

Beautiful car brother , great content as always 👏🏾👏🏾👏🏾

@PaulDaFox

Жыл бұрын

Thanks brother Chad, appreciate it!! 👍👍

Hell Yeah ❤

@PaulDaFox

Жыл бұрын

Thanks brother Lamar, have a great night!! 👊🏼🦊🏁

Great video! The STANCE looks perfect. I really love the color of that car. I hope you have an awesome Sunday my brother! 👊😎✌️

@PaulDaFox

Жыл бұрын

Thanks brother Rick, I like the stan e much better now! Appreciate you watching, have a great night!! 👊🏼🦊🏁

@BigStickStangs

Жыл бұрын

@@PaulDaFox oops 😬 My comment was autocorrected 😂👊

@PaulDaFox

Жыл бұрын

@@BigStickStangs I knew what you were referring to 👍🏼👍🏼

Sharp looking coupe!

@PaulDaFox

11 ай бұрын

Thanks brother, appreciate the comment and for you watching!! 💯👊🏁

looks great Paul

@PaulDaFox

Жыл бұрын

Thanks brother, appreciate you watching and the support from the club. Have a great week! 👊🦊🏁

Looking good Nice fox

@PaulDaFox

Жыл бұрын

Thanks Derrick, appreciate you watching - have a great week!! 👊🦊🏁

Nice vid. I need to raise mine around an inch front and back. Mine has cobwebs all over.

@PaulDaFox

6 ай бұрын

You must be super low if you need to raise 1" - get it done and clear the cobwebs 🤣 Have a great Tuesday!!

The coupe is looking good brother 👌 I don't mind a little rake but as long as it's low 😁👍

@PaulDaFox

Жыл бұрын

Thanks Victor, appreciate you watching - have a great week! 👊🦊🏁

🤟🏾🤟🏾🦊

@PaulDaFox

Жыл бұрын

Thanks James, have a great night!! 👊🏼🦊🏁

Love all your vids paul! I was hoping to see some MM adjustable rear lower control arms with regular springs, which doesn't require you to remove the wheels. The set up you have seems easy enough to adjust but was wondering if it was a soft ride or on the stiff side?

@PaulDaFox

10 ай бұрын

Thanks brother, the suspension feels great! The rear has the adjustable spring perch with an adjustable Koni shock and its just right for me👌 I have it set so its not too soft but not stiff as a board. Hope that helps, have a great weekend! 👊🦊🏁

If anyone wants an easy way to take tint off....spray the inside of the window with glass cleaner, tape a plastic bag tight over the widow and put the car in the sun for 15 mis or so. The tint will basicaly "sweat" off. You can peel it off in one piece or large pieces or if it's bubbled and shitty, a plastic scraper.

@PaulDaFox

Жыл бұрын

That's the next item to do on this coupe - remove the tint. I've never done it your way and have just applied heat to the tint and peeled it off. Usually I can get the tint and glue to come with it. Thanks for sharing - have a great week! 👊🦊🏁

Stance is looking really good! If you don't mind me asking, what are the wheel and tire sizes (front and back)?

@PaulDaFox

Жыл бұрын

Thanks BrotherTom, it was great meeting and chatting with you!! The tires are fronts: 235/45/17 rears: 275/40/17 hope that helps!! 👊🏼🦊🏁

Your going lower and I want to go up a little bit. My town roads are just about the worst so if I raise it back up it'll be a more enjoyable experience.

@PaulDaFox

Жыл бұрын

🤣 I’m just going 1” lower in the back to level off the rake. Thanks brother, have a great night!! 👊🏼🦊🏁

Hey just so you know Brew21 has his car that he did the two tone on. It is called the Carbon Fox. So I think you shpuld get another name.

@PaulDaFox

Жыл бұрын

That sucks! and totally didn't put that together, but anyways I changed it to Project "Nite Fox" - Thanks for the FYI 👍👍

Very nice car. Can you tell me about the brakes? Rotor size?

@PaulDaFox

11 ай бұрын

Thanks brother! The brakes are SN95 Cobra brakes on the front and rear with cross-drilled rotors. Hope that helps! Thanks for watching, have a great night!! 👊🏼🦊🏁

Paul, what is the wheel and tire spec on the notch, any fender rolling or rubbing? Thanks, great video.

@PaulDaFox

2 ай бұрын

The rear 1/4's have been rolled, so no rubbing whatsoever with the wheel setup as follows: front - 17x8 with 235/45/17 and rear 17x9 with 275/40/17. Hope that helps, thanks brother!!

Looks great! What are the wheel sizes front and back?

@PaulDaFox

Жыл бұрын

Thanks Jordan! The wheels are front: 235/45/17 rears: 275/40/17 - hope that helps, appreciate you watching, have a great night!! 👊🏼🦊🏁

@jordanhill8199

Жыл бұрын

@@PaulDaFox nice! What’s wheel sizes? 17x?

@PaulDaFox

Жыл бұрын

@@jordanhill8199 My bad, 17x8 front and 17x9 rears 👍🏼

@jordanhill8199

Жыл бұрын

@@PaulDaFox awesome thanks

Great video Paul ! Car is looking really good ! What adjustable coil set up is that ? Hope you have a great day brother

@PaulDaFox

Жыл бұрын

Thanks Darin...to be honest, I'm not sure what kind of adjustable coil setup that is. The fronts are true coilovers but that said the fox rides really nice and they adjust exactly like a coilover, so I'm leaving them. Have a great week!! 👊🦊🏁

@darinlewis9478

Жыл бұрын

@@PaulDaFox The KDW’s comment was referring to the outdated tires they stopped making many years ago That coil over setup looks nice but not one I’m familiar with . Thanks for getting back to me Have a great day !!

@PaulDaFox

Жыл бұрын

@@darinlewis9478 Lol🤣 thanks Darin, the tires are on the tires are to do list before the alignment gets done!! Appreciate ya!! 👊🏼🦊🏁

KDWs?!?? Those things have been discontinued since like 07 🤣 careful bro

@PaulDaFox

Жыл бұрын

They came on the car and to be honest, I never had these before but the fox does ride nice. They’re going to get changed just before I do the alignment. Thanks for watching, have a great night!! 👊🏼🦊🏁

Hey Paul da fox do you have the quads removed or do you have them on stalled and if not how is without them? I ask because my coupe roller project does not have them or the body brackets and I’m gonna do a ccw type wheel that’s 18x11😈👍🏻

@PaulDaFox

Жыл бұрын

Morning Chris, I don't have the quad shocks on but the bracket is still there which I will be removing. Honestly, I've never ran the quad shocks in any of my foxes as there's no noticeable difference without. Its one of the first items that I remove along with the dogbone on the rear diff. Besides, you would never squeeze in an 18x11 with the quad shocks so don't even worry about it. Hope that helps, thanks for watching and have a great day!! 👊🦊🏁

man get a jack for that hoist why you working on the ground for 😂😂

@PaulDaFox

Жыл бұрын

Lol🤣 I have a 2 post hoist on the other side of the garage but I still don't mind working on the ground. Thanks for watching, have a great day!! 👊🦊🏁

What coilovers are you using?

@PaulDaFox

5 ай бұрын

They were on the notch when we got it, but told MM coilovers. Thanks

Ok everybody, anyone running 17" chrome ponies from LMR with 3" extended studs without out modifying the actual length to put center cap back on. I do appreciate any response. Looks like I will be running the 17" Ponies.

@jesusmunoz5184

11 ай бұрын

I have thought about a small billet spacer, but I'd rather have the studs cut down.

@PaulDaFox

11 ай бұрын

This is a common issue with the extended studs and the center caps. Really you have 2 choices - 1) add a spacer to eat up some of the stud or 2) cut down the stud just enough to clear the center cap. Hope that helps, thanks for watching, have a great brother!! 👊🦊🏁 Btw, let me know what you do!!

@PaulDaFox

11 ай бұрын

I would personally go the other way, add the spacer brother!! 💯

@jesusmunoz5184

11 ай бұрын

@@PaulDaFox I'd figured that would be the best option especially for track use with the Weld's I'm sure the tech guys might have an issue.

@PaulDaFox

11 ай бұрын

@@jesusmunoz5184 💯you can always remove the spacers easily for a different application but can't undo cutting down the studs. I ran a spacer on my turbo foxbody drag car for that exact reason and never had an issue.