What should we build a drive shaft out of next? My mullet?

@linussjoberg3116

4 жыл бұрын

Mountain Dew cans!

@ethansmith7223

4 жыл бұрын

Hallowed by the mullet

@ianwtheman

4 жыл бұрын

Mullet 😂. Wonder how conduit would fare 🤔

@dylanbradley9188

4 жыл бұрын

Small fans on car charging batteries ??

@gonchu15

4 жыл бұрын

3D print one!

*You Drive it to ford... With Hidden Cameras...* Say it broke down on side of the road out of town.. Small Shop Fixed it... But now Car is shaking a lot...

@jacobsanders4254

4 жыл бұрын

Yes

@based_will

4 жыл бұрын

Omg lol

@SWINGERINTO

4 жыл бұрын

Hell yes!!!

@Nick210

4 жыл бұрын

LMFAO! YES!

@talllifts174

4 жыл бұрын

that would be fucking hilarious

4” pvc pipe filled with cement

@nyvinchenz9430

4 жыл бұрын

Might work but 4 in is way to big 3 in but cement would brake the car may expandable foam

@Silvia388S

4 жыл бұрын

Sced 40

@Jake_Hamlin

4 жыл бұрын

Harder wood with hose clamps/zipties

@nyvinchenz9430

4 жыл бұрын

@@Silvia388S no they should do it in cpvc schedule 80 that should hold up nicely

@JM-yx1lm

4 жыл бұрын

@@nyvinchenz9430 no dude, schedule 80 is thinwall need to try that super thin septic pipe

Rewatching old cleet vids to get a fix 😂

@j0sh707

Ай бұрын

The algorithm decided I needed to rewatch these!

Try different type wood like oak and a good lathe.

@charlesgotya5286

4 жыл бұрын

plywood cut in circles and stacked

@jorgey4

4 жыл бұрын

yea i'd say find a wood channel to custom make this driveshaft so that it's completely ballanced and make it out of quality wood, there's gotta be a grain thing that can improve the strength.

@darionscard3141

4 жыл бұрын

Truthfully using pine or cedar on this wasn’t smart...bet you a good cherry or hardwood spun on a lathe would have been stronger. Also maybe treated/stained.

@carlfreiermuth5424

4 жыл бұрын

Hickory is my recommendation

@EdTheMole

4 жыл бұрын

Yes hickory would be about the best if you can find it also have it done on a path by a wood turning channel would be a great idea never seen a calab between car channel and a wood channel think of the cross ratings.

Would have been EPIC if you would have pulled into a shop and just said “it’s got a little vibration” then the reaction would have been AMAZING lol

@philballslap

4 жыл бұрын

😂😂😂😂😂

@Moody10050

4 жыл бұрын

Great content idea

@Gonzo.S.Thompson

4 жыл бұрын

That would be funny.

@jackinthebox7172

4 жыл бұрын

@ Cleetus please do this 😂

@mohicanjoe2079

4 жыл бұрын

That would be awesome...do it lol

Use a grinder to round it down while it’s in gear, then add hose clamps every 6” to keep it from splitting.

@coltonpalm5073

4 жыл бұрын

and maybe stagger the fasteners on the hose clamps for expert balancing

@dogle9258

4 жыл бұрын

Gettin somewhere now. Idk about trying to turn the car into a lathe but maybe another shop could help them get one as round and straight as possible.

@DjDolHaus86

4 жыл бұрын

Truing it up with a grinder would make it run much smoother but wood is pretty weak when it comes to torque transfer along the grain, it's going to disintegrate no matter how many hose clamps you put on it. Pine power is no match for pony power.

@jamesglenn2006

4 жыл бұрын

Way too much thinking 👍 lol

@MrTugone69

3 жыл бұрын

I reckon they need to try it again as U said now they have their own track for shit to go wrong 🤙🤙

This episode sponsored by Garage 54.

@Syncopia

4 жыл бұрын

Ayyyyy

@jordansbikes819

4 жыл бұрын

Voice over and translation by b.m.i cleetus 😂

It's funny James is still as completely serious and thoughtful as when he's getting Leroy ready for their races.

"Did about as well as the V1 stock driveshaft..." Cooper killed me with that, still laughing. :'-)

You should of gotten a hardwood like hickory and then used a lathe to turn it to the exact diameter of the inside of the shaft. And attach with pins.

@trevorvanbremen4718

4 жыл бұрын

Forget the pins altogether... We don't NEED no steenking 'slipper clutch'... We built it into the driveshaft!

@flyingkangaroo7135

4 жыл бұрын

Ironbark gum mate but you guys probably don't import it to america then again I don't know. I thought exactly the same thing as you. Had a great idea go to farm supply store and buy a fence post or 2

"We did NAIL IT, that's how its supPOST to be"

@jipidou21

4 жыл бұрын

Viktor Samuylik nah man, its SCREWed

@igorkarastanov

4 жыл бұрын

Lol what’s up Sam

@MidwestFarmToys

Ай бұрын

Nah

"You got a bit of brake cleaner to put it out"😂😂😂😂😂😂 Hell yeah brother👌

Imagine buying a bargain stang you hear the driveshaft break after driving it for a few days on the highway and see a piece of wood dangling from under your car LOL.

@zstrode.8953

4 жыл бұрын

Lol id probably just laugh

@dextermorgan9703

4 жыл бұрын

Imagine buying a car without lookin underneath it😂

@drivewaymarvels311

4 жыл бұрын

I'd laugh so dam hard just thinking how high the previous owner was when he made that.

Rob: Here are the most expensive carbon fiber driveshafts and axles for the awd 4 rotor. Cleetus: Hold my wooden driveshaft.

@CharlesCorbett

4 жыл бұрын

Rob: closes eyes in panic when he launches in a drag race Cleetus: Eyes on the prize

@nyvinchenz9430

4 жыл бұрын

well that 4 rotor has a lot of sponsors i give Cleetus a lot of credit with his builds and if he was into the car builder scene I'm sure the guys couldn't make something real cool

I actually like the look of this car, would make a cool streeter with a decent power-train setup.

14:33 if you have other things to do today

@adrian24262

4 жыл бұрын

Thanks

@Evan2

4 жыл бұрын

Thanks

@tallerdetaller8605

4 жыл бұрын

@Andrey Angere thanks

@tallerdetaller8605

4 жыл бұрын

@Andrey Angere thank you kind sir

Rob Dahm: full carbon fiber drivetrain Cleetus: hold my Mountain Dew

@ProjectBudgetBaller

4 жыл бұрын

picklesthegreatest it is with that attitude

@oatmeal9164

4 жыл бұрын

@@picklesthegreatest there's a difference between drivetrain and powertrain

@dirtyricksanchez4483

4 жыл бұрын

@@picklesthegreatest you're kidding right? The engine and trans are the powertrain. The drivetrain is the axles, diff, and the driveshaft.

@charlesreiter8160

4 жыл бұрын

Carbon driveshafts actually exist...

Should of taken it to a local shop for an oil change and film their reaction LOL!

@gcomfx

4 жыл бұрын

Take it to Walmart for an oil change. lol

@MikeVieira

4 жыл бұрын

This!!!

@bigdfitness5020

4 жыл бұрын

@@gcomfx lol walmart probably wouldnt even notice.

@Jenuin

4 жыл бұрын

Ryan Bitter yes!!!!!! Lol

@RandyCivilized

4 жыл бұрын

Should have*

Doc spray em all 😂😂😂😂got me dead

LOL! This popped up on my feed for some reason. I think it’s time to revisit this one! Do it for Dale!

Imagine buying an auction car and finding something like this.

@71sc502

4 жыл бұрын

Frig off

@mranderson6840

4 жыл бұрын

@Dion Diova ahh hahaha

@mranderson6840

4 жыл бұрын

@Dion Diova it's so perfect

@justinballard7242

4 жыл бұрын

Trailer park boys ftw

@jlucasound

4 жыл бұрын

Don't listen to them, Randy.

The open flame next to James had me sweatin. Classic.

@AH-lw2bj

4 жыл бұрын

Lol me too Him leaning over and waving his arms right in front of it

@Polyodon

4 жыл бұрын

They have brake cleaner, no danger at all 😂

I so don’t miss the old shop! So crazy how far cleeter has come in the last 4 years!

Just watched the diesel as oil science episode. Had to come back to the first video I watched from the trending page. Hell yeah brother. Been watching for 3 years now

You should use a much harder wood. And you should have it machined on a lathe the so it is perfectly balanced

@cajunspike

4 жыл бұрын

Cypress would be a good thing to try.

@AlexPerkins252

4 жыл бұрын

I was going to comment this but you beat me to it

@nicholassmith5079

4 жыл бұрын

@@cajunspike ash or hickory (baseball bat wood)

@Stevesbe

4 жыл бұрын

Ipe also known as iron wood

@alexisrivera200xable

4 жыл бұрын

Even on harder woods it would not work. Wood has poor torque resistance, where it really excels at is withstanding compression.

really you used one of the softest woods. try oak. that was damn funny.

@THORHAMMER68

4 жыл бұрын

Or hickory

@majcrash

4 жыл бұрын

Black walnut would be a cheap alternative.

@ethanruthardt3925

4 жыл бұрын

We need everyone to like this so he can see it

@BigBlueMotors

4 жыл бұрын

Ironwood.

@jerryhager9041

4 жыл бұрын

Leave it to the boys down south to be real clever

Very underrated for the “scientific” projects you do :)

try wood driveshaft but find someone with a lathe to get rid of as much run out and then you may have more success

you should have tried a more stronger wood ive heard that morning wood is one of the hardest woods available still dont know if it would survive a clutch drop?..

@nonsensefpv1863

4 жыл бұрын

Yeah you might need Adam LZ to help with that

@ichoozjc

4 жыл бұрын

Just tested. It didn't survive a clutch drop. Wait, you said MORNING wood! I'll get back to ya in 10 hours.

@brinkerlong5989

4 жыл бұрын

Real talk Ipe might work

@gibsonanderson812

4 ай бұрын

Mine would😊

@user-zw7cb7sz1k

4 ай бұрын

Ya u do 😆

Why don’t you stick the car in gear an use it as a lathe to “finish” the driveshaft 😂

@DukeSky

4 жыл бұрын

What Mr Rpalm said...it would least get a few more RPMs out of it...

@seanstambaugh3256

4 жыл бұрын

They should make the driveshaft out of same material cut end open slide the wood in the driveshaft fill the entire driveshaft with wood weld it shut and take it for a drive

@kevinhibbard320

4 жыл бұрын

Wasnt that an episode of macgyver haha

@seanstambaugh3256

4 жыл бұрын

@@kevinhibbard320 I think so

@A-Aron8907

4 жыл бұрын

They could use the flap disc and the grinder and make it happen forsure

"Yeah, I'm sure they get could a deal", aaahahaha. Love you guys! Maybe my favorite channel.

Here in 2024❤ Cletus looks so different

Words Home Depot and straight wood have never gone together in history

@MattsAwesomeStuff

4 жыл бұрын

Lumber at Home Depot is like men who work in theatre. None of the good ones are straight.

@jaregg

4 жыл бұрын

Homo Depot

@MattsAwesomeStuff

4 жыл бұрын

@@jaregg - sure is when you're there. Heard you pick em up by the truckload. Every Tuesday night.

@jlucasound

4 жыл бұрын

That is a pretty warped perception, Joseph! ;-)

@Jarrettguitar

4 жыл бұрын

Truthh

3" wood core (could start with a 4x4 and toss it on a lathe) with a good healthy fiberglass wrap thick enough to bring it up to 4"

@AlexanderBurgers

4 жыл бұрын

Most of the load would be on the outside diameter, a styrofoam core glass fiber shaft would basically be the same, but lighter.

@F14Goose37

4 жыл бұрын

Ash or hickory. Both should be plentiful in Florida and both should have good characteristics for the application. There is a reason most quality tools are handled with hickory and ash. Osage orange should be plentiful there too and I hear it is a good bow material. The springiness and strength might help make it a good driveshaft material.

Do a wood post then get it sprayed with line-x

These science videos are a pretty decent competition for the Beyond the Press channel :)

Hoonigan: Hey we made wooden wheels!!! Cleeter: Hold my bardle Skeet!!!

The grain of the wood matters! The first piece you showed that had concentric rings would probably hold up better! Imagine twisting a whole onion, then imagine twisting an onion sliced in half. Which one is harder to break?

@guganotubo

4 жыл бұрын

Yeah, I think galvanized banding in a torque tightening spiral over the wood would take a few more hp

@waybous

4 жыл бұрын

"Ogers are like onions..." Wait, wrong movie.

@1989HENDOE

4 жыл бұрын

@@guganotubo I like the idea of banding it. Maybe soak it in a gel clear stain and let it harden first then band it and duct tape it!

@sawspitfire422

4 жыл бұрын

Just commenting so this thread gets more attention. Thats right Algorithm I know what you're doing

@WestCoastWheelman

4 жыл бұрын

Actually you're wrong. Core wood is often checked and full of cracks and imperfections. You want a good section of straight grain with no core and no knots.

Awesome, great for weight reduction. Good work guys!

When I saw the grain on the end of the post I knew it would fail. Use a post made from the center of the tree. Use a hardwood like oak. Turn it on a wood lathe. Or maybe use a metal post from the Freedom Factory chain link fence that needs to be replaced.

Cleetus “Guys, we’re going to get serious with Leroy and get him deep into the 7s. The plan is ..... wait, is that a chunk of wood?”

@guganotubo

4 жыл бұрын

Mount a flag rocket to the front crashbar and shoot it 4 seconds into the run to to trip the beam

@rttaylor99

4 жыл бұрын

@@guganotubo you need to put this under cleets comment lol

@ramlaen9473

4 жыл бұрын

You do realize this is a pre-filmed episode used to fill a content gap right?

@josephobrien1617

4 жыл бұрын

Need to make more money, speed=money

@higgy82

4 жыл бұрын

You're the kind of viewer everyone wishes would just go away.

Now, a piece of straight grain hard wood, turn it round in a lathe. Proper industrial epoxy with some holes for the epoxy. Will work and let you drive the car, burnout near certainly not.

@Cekmore

4 жыл бұрын

Turn the wood using the drivetrain

Thats actually pretty straight lumber for home depot standards! lol

needs to be laminated boards, with the grains crossed.

@thinusenslin

4 жыл бұрын

RCPro Driver agree. Much stronger if you laminate wood.

@turbo4g63det

4 жыл бұрын

I was think the same thing. It would probably take a burn out.

"You guys remember that list of priorities we came up with? Well, we just chucked it like we did this wooden drive shaft." 😁

What we learned: Gorilla glue is rated for at least 140hp

@mattg6422

4 жыл бұрын

The Weapon Collection that’s what he is saying. Since the glue worked it is rated for AT LEAST 140 hp

@ZZ-os4nb

4 жыл бұрын

@Real Donald Trump I don't doubt it but it doesn't make it any less impressive that store bought glue can still handle a significant load.

@ccmachii6780

4 жыл бұрын

ya goAt

@asylumental

4 жыл бұрын

@Real Donald Trump true

@asylumental

4 жыл бұрын

@@ZZ-os4nb also true

What a bunch of goobers! I LOVE YOU GUYS!

And here’s me thinking you were going to turn it down on a lathe...

@ihatecrackhead

4 жыл бұрын

pressure treated wood is weaker and just cause glue says it works on metal doesn't mean well they should lathe a stronger wood with 2 part epoxy for glue

@johnh2937

4 жыл бұрын

@@ihatecrackhead With the special additive for metal bonding available from West Systems Epoxy

@gearhead3990

4 жыл бұрын

For sure. Thos could actually work if you took the time to engineer it properly.

@Nevir202

4 жыл бұрын

A lathe? What, you think they’re made of money? 😜🤣

@kylemauled1287

4 жыл бұрын

@@Nevir202 they could've turned it first thing after installing it =D

Somewhere in a 3rd world country someone has absolutely done this.

@codyparker679

4 жыл бұрын

Rock crawlers often run square tube driveshafts

@zeusapollo8688

4 жыл бұрын

Do it in Guyana. Make them out of greenheart

@BMWI-gk9wh

4 жыл бұрын

Definitely!! Forsure

@andrewclemmit2042

4 жыл бұрын

Soon America will be a 3rd world country

@brandonbullins

4 жыл бұрын

Cuba

Cement with rebar inside. You could easily make a cylindrical mold from a 3-4" PVC pipe or something. You cold also just do a PVC pipe filled with cement.

@christopherwarnecke4858

4 жыл бұрын

Way to heavy lol

@connoisseuroftigolbitts

4 жыл бұрын

All that weight will snap the ujoints

Put the wood drive shaft and take it to carmax for a check up it well be epic

"Cut twice, measure once"😂 @ 6:18

“Whatever dude, this is just science.” T shirt time

To make it true center it’s should have been put on a wood turning lathe.

@andyc12344

4 жыл бұрын

Just do it on the car. Its like i lathe. Cut the wood into a triangle

@Oink_Blaster

4 жыл бұрын

You don't say!

@brianmef71

4 жыл бұрын

Wow! You're smart! 😂

@HOllyBOni

4 жыл бұрын

Or maybe they should have used like a steel tube for the driveshaft? Hmm, I think i'm onto something...

@JM-yx1lm

4 жыл бұрын

Wow this guy is so smart. I never knew a lathe could be used to do that sort of thing.

Go for distance on the next homemade wood driveshaft. Avoid the harsh take offs (and burnouts) and shifting. I’d bet you could get pretty far keeping the speeds lower. Awesome experiment. Great video.

You guys are freaking hilarious.

I can guarantee you that this is the fastest "Stick" shift Mustang in existence!

They should have put it on lathe to balance it out more.

Fine I’ll watch it, KZread won’t stop recommending this to me. I already know what’s going to happen. But w/e I’ll watch haha it’s cleetus after all.

Get a PVC PIPE and fill it with different stuff and RIP it and when it breaks it's like a Piñata

@saulprokopavicius3628

4 жыл бұрын

Ruan Venter pvc pipe with concrete inside with steel reo 🤔

@Hbzprojects

4 жыл бұрын

@@saulprokopavicius3628 too heavy at that point

@nicbtw6062

4 жыл бұрын

@@Hbzprojects fuck, it doesnt matter if its heavy, it just needs to work, point a to b end world type shit... this is fascinating

@StreetbeatDesigns67

4 жыл бұрын

Concrete will not handle that type of load very well at all. It has absolutely zero tensile strength

@rocsti5402

4 жыл бұрын

Spray foam... But I'd just use wood but soak it in water for a day and dry it out, make it round and smooth and balanced and it'd last a while...edit, I would jam it into the ends with no glue and a little loose then add water, let it expand, dry, and then instead of glue I would make some mounts or a bracket or something else for support and connect it better, glue was stupid because this thing has no balance... Without balance it's not gonna last at all... I'd also research wood types and try to find something that has some flex to it maybe not hardwood but idk.

“That’s how it’s su-POST to be” James with the pun game

@chadb7910

4 жыл бұрын

I actually didn't even pick up on that!

THIS IS CONTENT BABY

4 years later this is still hilarious, but that 7$ fence post is 36$ now lol

Use 8 or 9 dowels epoxied in. Like cable, one dowel surrounded by the rest.

@julianbeecher3338

4 жыл бұрын

This is a damn good idea.

@TheTyisawesome

4 жыл бұрын

Great idea

@hondarider436

4 жыл бұрын

Excellent idea

@tebeardenkahboom1

4 жыл бұрын

I think their next drive line should be made out of nachos

Rachet Extension drive shaft, get a 36" extension , weld 1/2 drive adapter to a plate to driveshaft end, weld a socket to a plate on otherend.

@Mr.Beastforpresident

4 жыл бұрын

1" drive 36" extension

Winter is coming, time to chop the wood :)

You guys are crazy fun

“Cut 2wice measure 1nce” Cleeter McSkeeter

@weareallbeingwatched4602

4 жыл бұрын

CUT! I SAID CUUUUUUT!

It would have been funny to take it to a drive shaft shop to get balanced.

@eamonia

5 ай бұрын

That's all I could think during the entire video. Just like; "Hey, I just bought this car and it's got a little bit of vibration. Can you check it out?" 😆

“Wooooow, too sketchy guys” as he walks closer and gets a close up shot 😂💀

This made Me laugh 😂

James: we are officially wood wigglers! Cleetus: shove it up in there! Cleetus: we might have clearance issues

@jamesplotkin4674

4 жыл бұрын

Coop: no comment.

@MrSexyPsycho

4 жыл бұрын

wood whittlers he said , dumb ass

@tebeardenkahboom1

4 жыл бұрын

mr sexy psycho, ever consider that he might have been doing a voice activation and he did not edit it mr. sexy psycho?? Now, let me see here, hummmm... mr. sexy psycho..... Huh..... mr. sexy psycho.... Wow.... mr. sexy phycho.... Ladies and gentlemen, Cleetus McFarland and all the McFarlane KZread fans and all of KZread fans alike Looks like we have a sexual predator on our hands. Hide your children!!! Hide your wives your husband's your nieces, your nephew's, your grandma's and your grandpa's!!! Hide your dogs and cats and especially hide your gerbils!!! We have a psycho with no shame in his game he is a sexual predator and nobody is safe. I bet that psychos zipper is down as we speak due to all the attention he is just now received and especially because the mention of gerbils. Again hide your children and your pets!! Hide the family and Neighbors!!! I can't express it enough, A chomo is on the loose!!! How do you like me now DUMB ASS!!!

Forget wood, PVC pipe is the way to go.

@monkeybuttdevinlane

4 жыл бұрын

What could they fill it with? Flex seal?

@davidmathay7117

4 жыл бұрын

@@monkeybuttdevinlane Expanding foam!

@youtubeisbroken241

4 жыл бұрын

JustiBoy filled with jb weld

@mickk3943

4 жыл бұрын

@@monkeybuttdevinlane Cement lol

@MartinAZoel

4 жыл бұрын

maybe pvc pipes fitted into each other and glued togheter so its a mix of glue and pvc and make it full

How about see how well a 2in peice of exhaust as a shaft can hold up. I'm guessing itll twist and pull right out of the trans

Glue some 1×1s together, then round the sides down on a wood lathe, like your making a post. Thats how they make wood beams , and they are super strong.

"Churched up" is now my go to phrase 😂

@downtimegarage605

4 жыл бұрын

Lowrider Bug joe dirt

Try different woods have somebody turn it on a lathe so it's perfict

We need more science in the Chanel!!!!

Everyone: “...” Posers: “We’re at SEMA!” Guys who actually go 7 seconds: “We’re building a driveshaft out of wood!”

@Cekmore

4 жыл бұрын

🍻🐈🔥

@ArKritz84

4 жыл бұрын

This year it was actually called SUPRA

@nzzs203

4 жыл бұрын

@@ArKritz84 and go kart and power wheel build off...

@ArKritz84

4 жыл бұрын

Seriously though, most car shows are mainly an industry circle-jerk. SEMA have just taken it a step further by being closed to the general public.

@eriklarson9137

4 жыл бұрын

And strangely the wooden driveshaft is better fabbed than a LOT of the stuff at SEMA.

You guys are now certified “CAR”penters. Adept in working on vehicles AND wood.

@aldrel04

4 жыл бұрын

Why did i scroll way too long to find this? lol

@tylert69goat

4 жыл бұрын

I rolled my eyes so hard that it made me sea sick. 👍

@thatonedudeyouknow9603

4 жыл бұрын

@@tylert69goat you turned my laugh into a wheeze

@quickdeuce

4 жыл бұрын

LOL,, perfect! Soo,, can we conclude when asked if a 4x4 and Gorilla Glue can suffice as a temporary drive line,, "And there you have it,,"

Cleetus, thanks SO MUCH. My credit score legit went up 26 points by using the Boost and it didn’t cost me a dime!

The way the grain was killed it.

I've heard of sawdust in the transmission but this is ridiculous.

@bansheemania1692

4 жыл бұрын

Yep, a Nice Cup of poplar in the rear and All's good 4 the next guy

Cleetus: "That's a nice piece of wood right there dude" James: "Nice and straight"

@djstatyk1540

4 жыл бұрын

Transgenders: RRRREEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE

Do more stuff like this please!! Utilize the Freedom Factory while you're at it!

8:54 love when I’m watching a video and they do something exactly the way I was thinking I would do it.

"McFarland Fabrication: Sporting Wood since 2019"

I’m really digging that color on the Mustang.

@Natedawgontheright

4 жыл бұрын

Me too the body and color look pretty nice

@MarkCantu-jj1yu

4 жыл бұрын

Is that a 98?

@zachdavis3068

4 жыл бұрын

Ford offers that color on their aluminum f150s

@lordXguru

4 жыл бұрын

@@MarkCantu-jj1yu it has the 94-96 tailights so it might be a 96 since it has the 4.6 v8 and not the 94-95's 5.0 v8.

@MarkCantu-jj1yu

4 жыл бұрын

@@lordXguru Thanks brother! I was really curious cleetus never clarify what it was besides mustang

Hell yeah brothers that was a great idea! I think if you took multiple pieces of plywood and glued them together to make a 4x4 it would be WAY stronger due to the alternating grain of the plywood. It might even handle a burnout. Maybe even wrap it in flex tape for extra stiffness. Bog deep and let 'er eat!

I have the same exact car they used, A 1995 although mine is cherry red and the interior is completely custom and miss matched looks really nice. The best car I’ve ever driven to date probably always will be personally

Order in a stick of Ironwood for the next rip. It's stronger than some types of steel. Also put it on a lathe for at least a cursory balancing.

@dogle9258

4 жыл бұрын

Yeah least a chance of no runoff and balance

@greatnortherntroll6841

4 жыл бұрын

That'd only cost about 10X the cost of a regular driveshaft, and weigh about 5-6X as much! Lol

Use some old growth oak or cherry wood that is very dense and hard.

THAT'S SOME NICE WOOD RIGHT THERE

Try a piece of hardwood like birch. Pressure treated posts are generally softer woods. Have a viewer turn it down on a lathe and ship it to you

Sees cleetus and the boys at home depot: "Hey guys working on the new side of shop today?" "Naw, we're building a wooden driveshaft for the mustang. No seriously, tune in next week."

Have someone shave a 4x4 down in a lathe to just fit into your cut driveshaft that way it's better balance and bo stress from shaking

@brianr8581

4 жыл бұрын

That's what I was thinking, wish I knew the Id I'd turn them down some maple, oak and elm blanks

@sed8181

4 жыл бұрын

@@brianr8581 they could also stabilize the wood with a vacuum chamber if someone has one big enough. it would make the wood less prone to splintering.

@ArKritz84

4 жыл бұрын

That’s too good for them. They should just shave it down while it’s mounted under the car.

Cleetus, that's nice and straight, Dr Sprayemall " that's a nice peace of wood there".

This video is 🔥

“Ya get termites in yer drive shaft, yer screwed”!! LMAO 🤣