Hope to see you guys at the truck show come out and see Johnny cash before we start rebuilding him!!

@Finane1

Жыл бұрын

Tim when hauling a piece of equipment backwards you got to cover the exhaust. The turbo will free spin with "no oil" and you know what happens next.

@Drew_379

Жыл бұрын

I'm definitely going to try and make it

@dodge33445

Жыл бұрын

DAMNNN you beat Dad to work!!! TIm for the win!!! lol.

@coghi2334

Жыл бұрын

Before disconnecting, move the fifth wheel forward, it makes it a lot easier. And cover the smoke pipe you going to damage the turbo.

@christophertripp9898

Жыл бұрын

Were us truck show

When you hook up to your deck after removing the collars, before you put your wood and air back up, slide you fifth wheel forward to have more of the truck under the deck to avoid chucking the wood. When you re-connect put your safety pin in. Air down, pull boards. Then slide the fifth wheel back using the safety pin to hold it still. Then drop the deck off to re-connect the collars.

@Truckerkaige

Жыл бұрын

I was watching him load it and was thinking of fsc trucking and here you go 😁💪

@fsctrucking

Жыл бұрын

@George Jones once.

@burntnougat5341

Жыл бұрын

Should be the pinned comment

@brentlance2379

Жыл бұрын

Always got small ass chunks wood.. always seems to be a forklift, skid steer or loader there to save him.. I have yet to see him unhook it right

@Eisbaer-F8

Жыл бұрын

there are many ways to work. the fast and smart way ,ore the slow and hard way. Tim like the hard way. you show the disconect and reconect many thimes in the smart way !

HEY TIM, READ THIS! IMPORTANT INFO. Very experienced double drop guy here. 1. Slide 5th wheel to ahead of center. (Gives proper cantilever) Now you can drop the trailer. 2. Set the trailer on the ground. I only use wooden blocks to store the trailer. (Chain back the goose neck to the deck when you store the trailer or when you have snow) 3. Remove Air Lines!!!! Tuck them away! Hard to find spares…yup 4. Unhook D rings. (Do Not pull the safety pin at this time!!! Or crawl under the trailer with both pulled! The only thing holding that when you were under was the pin V notch! Not a good way to die! 5. Find proper 4X6 hardwood for frame rails. One is enough! Back truck under again leave air out Install block of wood at the ramp. 6. Now you can pull the safety pin, jump in air up and gently pull away. When loading pull your chains first. Less sweat 7. Load. Always store your ratchet binders oiled and threads retracted. 8. Reverse the process to hook up. Remember to line the goose neck to the trailer, not the truck. Print and Carry in the truck with you. Glue it to your forehead if you have to, But be safe…that was pretty crazy.

@rposton919

Жыл бұрын

Watch 'FSC Trucking'.

@jonson0721

Жыл бұрын

@@rposton919 I do watch his channel. I did the Baltimore run as well. Good guy

@rposton919

Жыл бұрын

@@jonson0721 I was suggesting the Gentrys watch it.

@timothyfowler8278

Жыл бұрын

That is cool but easier with lowboy

@jonson0721

Жыл бұрын

Little 30 t wagon. We use them to be under the 80 000 lbs. Some trailer brands use air bags on the rails.

Where's your turbo savers if I loaded a machine without putting the turbo saver on my boss would have a fit

@BigDarrin3163

Жыл бұрын

He doesn't know any better. Never been taught correctly. Also flags on the widest part of the load. Please wash those nasty windows, wear gloves so you don't get it all over the wheel, and dig the taters on the tach. Good grief.

@OffroadCpl

Жыл бұрын

That's a myth

@ericpeterson9051

Жыл бұрын

@@OffroadCpl it's not a myth because it makes your turbo spin backwards which ruins them not to mention there's no way for lubrication without the motor running to keep the turbo lubricated so you supposed to put a turbo saver over to exhaust to keep it from spinning

I saw Braxton stick that trailer with that truck into a hole in front of his shop on another video better than 80% of these Swift drivers that I have to sit 10 minutes waiting on them to get it in a hole at the truck stops. He is an awesome young man

Just had my first working interview since I got my cdl, accepted the position after spending the day with the owner and moving 3 loads. 96 KW with a straight piped cat and a 15 speed. So glad I’m not starting in a plastic truck for a mega carrier !! Let’s go !!!

@micksroversmg558

Жыл бұрын

Would love too get a start in a 96 truck over here in England but all on euro trash emissions trucks!! ERF Foden or Leyland are my favorite!! All brands relegated too history books now!

I know that You probably won't read this But Steve puts a long. 4X4 across the frame on Orwell. It's so much Safer than the way you are doing it. Plus it's a whole lot faster that way Not trying to be Rude just trying to make it easier and safer for you...

4 dollars a gallon. !!!!!!We in Scotland are 12 dollars a gallon 😭🏴󠁧󠁢󠁳󠁣󠁴󠁿 Love your videos. Your boy is gonna be one hell of a driver and mechanic. Keep up the good work. The world needs more like you Stay safe Raymond from Scotland

@raymondrobertson3869

Жыл бұрын

@𝑻𝒆𝒙𝒕 𝒎𝒆 𝒐𝒏 𝒕𝒆𝒍𝒆𝒈𝒓𝒂𝒎 @𝒈𝒆𝒏𝒕𝒓𝒚𝒂𝒏𝒅𝒔𝒐𝒏𝒔1 I am not very good on the computer. So this is the best I can do. Keep up the fantastic videos. I am sorry about not texting but I would love a sticker or somthing Raymond

Next time cover that exhaust pipe u will screw up the turbo up

Since you got the W900 out of retirement she been putting in work 💪🏻💪🏻💪🏻💪🏻

All that big money you making time to upgrade that lo-boi

If you gonna haul equipment around you need to get nerf football to stuff in the exhaust stack to keep the turbo from spinning dry.

@zachpolihonki1168

Жыл бұрын

Just get a turbo saver a bag that meant for going around the exhaust

Great video Tim glad you were able to get the loader delivered. Looking forward to your next video stay safe Tim.

You made that mechanical detach look fairly easy. I like our live hydraulic pretty well. Thank You for this Video !! H.

A great trip and thanks for taking us along . 🤗👍💖💫

Braxton is an awesome kid, you and the wife are raising some great kid’s and love the channel keep up the good work 🤙🏾💪🏾🚛🚛🚛🚛🚛

Good to see you Tim hope family is doing great take care buddy

Ya ought to watch FSC trucking Steve has that same set up he makes it look easy

@danielseelye6005

Жыл бұрын

I came here from watching Steve collab with the Family Gentry and remember him telling Tim tricks of the trade for using RGN's. Seems Tim might've forgotten it. 😋

@donwhittaker2116

Жыл бұрын

@@danielseelye6005 now I remember FSC Trucking mentioned Gentry And Sons on a video. Forgot all about it.

@danielseelye6005

Жыл бұрын

@@donwhittaker2116 It's the one Steve tried to drive Cleetus' souped up RZR through Tim's mud bog... And got it stuck.

@donwhittaker2116

Жыл бұрын

@@danielseelye6005 to be honest I really don't remember.

You go brother Tim, rack that shit up! Love and blessings my man! 😎👍💪✅

Another good one brother love love that truck. Looks like y'all's keeping pretty busy keep up the good work brother God bless ya all.and good camera work

Tim, you are doing such a fine job!

Glad to see u again been off for a few

I love the shots from the trailer point of view. Really awesome!

Love you too brother! Miss Braxton!

What a hodge podge setup! What in the world. So much hassle to hook and unhook that piece of junk.

Hey Tim! Love it when you show the hauling segment from different angles! It really adds a lot to the entertainment value! Video is still very overexposed when you film from inside the cab and even some indoor stuff. You might need to really double check the camera settings before recording.

When i ran a 60 ton float i had a stinger that rested on the rear frame and lifted the front of the trailer and held it up never disconnected the trailer ever,just lifted it off the pins.

@ifyoutip

Жыл бұрын

@Don cote was that a mechanical rgn? My 55 ton had on to but it ran off a dual wetline. Mine was a non ground bearing

You have gotten very good with that rgn trailer good job man .keep it up

Thanks for the video.

Good job Tim appreciate the videos buddy 👍

exhaust leak,.? keep all Windows opened until you get to the shop and fix it.

Just so you know Tim in the past I did a of equipment moves and you always tape up the exhaust pipe up on your load when it's not running because the turbo is spinning dry no oil lubricant on the bearings that's why if it's a short move you just leave it running and that's why towtrucks through the sock on the pipe they don't want to be liable for the turbo and that noise your hereing just might be the clamp in-between cold and hot side of the turbo on your truck it almost sounds the same as my truck and it didn't loose boost much at all but it run hoter and sounded the same as yours and the bolt broke on mine but really didn't loosen up that much and spin around but that's what it was on mine to look at it looked fine when it was cold you could shake the bolt a bit other than that it looked fine. Have a great day brother.

Gosh I love your Kenworth!!

Gentry n son's. I been watching u for a while. Back in 12/99 I lost my wife.directly next to me. I actually put my head on her back. But some was off. Doctor's gave her strong medicine. That she with drew. doctor gave her what she used to take.bam... we had so much planned. Watching ur family is actually opening my mind again. I'm waiting on a settlement. I definitely don't want a new truck.78 kenworth till a 1999. Cat engine. I really would love to drive for you. God hopefully will take me out this damn NYC.god bless you and your family...

I never knew how exciting loading equipment and the view of the w9 screaming!

They should make a semi with a shitter in it .water tank shower n bed stretch it and build it.that would be bad ass .

@craigbush189

Жыл бұрын

I've seen 2 so far but I dont drive trucks but everyone in my family does.keep up the videos and the hard work 💪

Hi tim my stepdad passed away yesterday love your videos

@kyleeast9473

Жыл бұрын

Lost mine a month ago, sorry for you’re loss!

You need to add a T-bar in the neck of your trailer that reaches the sides of you truck frame with a air cylinder and control valve on the outside to raise and lower the neck.It will make it a lot easier.I used to pull one that had it.Just thought I'd share that.I hate seeing someone struggling with something when I know a easier way.Have a Blessed day

You need to make a little flip up bar. That flips up where the wood is at behind your fist will. I've seen some of the old timers have Pizza metal flips up to the right height

That loader has good rubber all around. 👍

Great video even though you worked your ass off witch I know you do every day for your family good job 👏

Man i love that K-Wopper makes me wanna be a trucker just to drive that thing!!

Hey brother I run a 2013 Volvo 120g 6 days a week. You got a awesome loader .

You’re coming through my hometown in this video. Good ole 411 and Chatsworth.

Hi hope y'all have fun

Pretty cool seeing a big KZreadr video going through your town

I’m heavy haul driver in the wind division and I pull 19, 13, 9, and 8 axles I keep trailer chained from neck to deck.

Nice video Tim have a great day my friend greetings from Portugal Lisbon

Make a set of frame rail ramps and then get a good 4x6 or 4x8 to set the neck on so you don't have to fight it so much. It'll make life so much easier

Hi Tim; The low boy has a very funny system of hitch.

Yay Tim, you got windshield wiper on the W900 !

Love it! hit I-85 N ext 140. If ever this way and need anything just shout. Meet you there.lol Keep on Trucking enjoy watching Keep up the great content.

GREAT VIDEO GUYS !! ❤️🤍💙🇺🇸🇺🇸

Excellent video Tim

Check you headbolts and anything seeping from under the heads. Since you jacked it up a broken headbolt will make that sound. A exhaust leak should be simple to find if thats it.

Great job, Tim! You must be "wore" out after all that booming and duck walking!

Hi Tim watching videos of you hauling heavy equipment makes me wish I could pass a physical and get my CDL back and drive again I loved driving even being able to do a ride along would make me happy. I have family that drive semi's only thing they never get close enough to where I live for me to go and ride with one of them or the company won't allow a rider I do miss it.

Next time you haul equipment and the exhaust is pointed towards the wind . Tape it off with ductape or something . Wind ain't good for that turbo

❤️❤️❤️ Gentry and Sons

hi Gentry your videos are inspired and I might thinking of becoming a truck driver

Love your content, always fun to watch, i truck up here in western canada, and i was wondering why you didn't cross chain both the front and back of the loader?? or why you didn't chain it down either in the center as i do believe it turns/pivots via hydraulic steering in the center of the frame...

Gentry&sontrucking It sounds like your W9 head gasket is Leaking that's what noise my N14 made when it blew the head gasket out! Mine torched out the middle head cause I ignored it and cost me a head I'd do a cylinder leak down test on that asap before you torch the head or the block

The old KW would look mighty fine with a nice headache rack on it boss.

My last ride was a w900 limited edition, studio sleeper, 725 😸 18sp 373gears cut back to 98mph.

Looks like Brax has a new toy to build mega jumps on the farm for his razor 🤠🤠. Hopefully you can find a good deal on a hydraulic lowboy to make loading easier.

Great content thanks for sharing

I am going to be in Nashville on the 19th. I am transporting a Beagle puppy from Missouri to it's new human (owner). Wish I had more money for fuel, I would love to swing by Sweetwater and meet all of you!

Cajun lady has amazing food. Dinner bell also in sweetwater.

I pulled mechanical RGN now I pull a hydraulic detachment I never slide my fith plate Have your fifth plate farther forward. You have lots of room to turn I think it would help keeping your neck up when split.

That's the job I loved the most 💕 I drove a triple axle international with a Cat and 18/ triple axle low boy 💪 Since you're hauling oversized you should get an easier set up 🤙

very good ill call the office on Monday

Can you move that fifth wheel up a little bit for that block and lay on the frame in the toung don't hang so low you don't have to use blocks on the trailer it's designed to lay flat on the ground and then you can dump the air on the axles where will they flat

Nice trailer!!

🤔 yep, better think bout updating that back breaking lowboy trailer. 😉 Not getting any younger. Nor are those disc in ya back. I'm sure lots out there know what I'm talkin bout 💪😉👍💯

C'MON MAN you know that trailer ain't right. It's time to step your trailer game up. You know Heavy D would float you a loan. Get you a new shiny one

Gah dang bud you got your but handed to ya where was the help on this one you Def worked for this one

Cover the exhaust when hauling equipment backwards.

Tim, love the videos. Camera quality seems to be better but, only issue I’ve noticed the past couple videos is anytime you’re filming anything outside or anywhere with bright lighting the contrast is way off and you can see anything on a screen.

I know a Volvo fan who can put this wheel loader to good use. Hope he watches your channel. Letsdig18. Lovely machine.

Need to have your welder weld up in an alignment block so that thing will slide together nice and tight and you ain't have to work so damn hard to put the nose back on that drop deck trailer

@joeysimpson4020

Жыл бұрын

This. We had one built on when we had Trail King design and build our lowboy

You should get a Quick coupler an forks to the whelloader.

I take my hat of for you, to be able to work with this trailer. I'm glad i have a hydraulic lowbedder .....

That dam W9 gets with it 💪🇺🇲

That's awesome wish I could be there

I would love to see you and letsdig18 get together and haul his equiptment and do a pond job together.

@stupadaso7948

Жыл бұрын

Letsdig 18 has a lot more class than that.

Perfect timing for you upload. Im stuck on the side of the road. My fan clutch went out so i have no engine fan and i have a load. 😑😔

Hey Tim them lights have a relay box under the trailer that makes them blink it could be bad

That loader should help you around the shop a lot

On those older Cummins I’ve heard a broken head bolt make that chirping noise

@rce8540

Жыл бұрын

Yes I think your right about a broken head bolt. Had Cummins since 1978.

@krisgiannone8815

Жыл бұрын

@@rce8540 my big cam is doing same jus not all the time may not doit for 3 days then will do it 1 time and not again motor only has 60k on it

can never go wrong with safe load

you got, so much stuff going on that you might have to hire young braxton to meet the deadlines.? ;-)

Why not a Hydraulic low boy instead of a RGN?

@timatwell3728

Жыл бұрын

There all rgn powered or not if the neck comes off r=removable g= goose n=neck If he had a 4"X8"X4' block instead of 4 blocks he wouldn't have that much trouble unhooking and hooking back up

That trailer dangerous be safe tim hope and pray you get a new one soon

@danielseelye6005

Жыл бұрын

The trailer's fine. He just needs to operate it better. - One big block under the gooseneck that stretches across the frame rails to support it. - Have the fifth wheel slid up so the neck will rest more on the frame and be level instead of sloping down. - Having the trailer flush to the ground instead of resting on blocks. I know he's new to the RGN but he needs to get a better understanding of the equipment.

@mattmccool9243

Жыл бұрын

Dan the super trucker 🤣

@shawnlee6690

Жыл бұрын

I don't drive truck just common since!!

those volvos are great, they use them in alaska mines!!!

Not a hater but tell me you don’t know how to use a RGN without telling me you don’t. Maybe make a KZread video 😂

They are a beautiful loader Tim i’ve done alot in 1 of those a L150. They are so much better than a Komatsu i’ve done plenty in those also.

I just ordered the long sleeve T-shirt thank you

Hi Tim finally you got some Wipers and your Speedo is working wow you got your chit together good on you Man where is the Boss Tim I’m not happy not to see the BossMan ok bro you have a safe trip bro Cheers God Bless 👍👍💪💪❤️🚜🦘🦘🇦🇺🇦🇺🇦🇺

Hey brother we love your vids seems everybody is giving you advice sooo. Becareful with that neck I've seen them fall not nice way to go and tape that exhaust. we love ya don't want you hurt

Tim where did you find wipers for the w9 at it sure sounds good especially pulling a load safe travels and b safe.🤙🇺🇸🤙