Great vid! I like where it started so you can apply it however!

@LiquidrubberCa

3 жыл бұрын

Thanks for the kind words. Please let us know if we can help with anything along the way.

Stoked it is a Canadian made product. Gives me the confidence that it's built to handle the elements as well. The fact that you have responded to every one of these comments gives me even more confidence in your product. Can't wait to try it out on my deck!

@LiquidrubberCa

2 жыл бұрын

Sounds great. Please let us know if you have any questions as you work through your project.

@camb565

2 жыл бұрын

@@LiquidrubberCa I'm already done and just as I assumed your product is great. I had to seal in a front porch that goes over my basement. It's now gone through a very wet west coast canadian winter and still looks as good as the day I put it on. Thanks for making a great product, I will definitely recommend it to people.

@LiquidrubberCa

2 жыл бұрын

@@camb565 That's fantastic, happy to hear everything worked out.

Great video my friend, very informative, thank you very much for sharing, keep safe

@LiquidrubberCa

3 жыл бұрын

Thanks for the kind words. Please let us know if we can help with anything along the way.

Love this product!

@LiquidrubberCa

2 жыл бұрын

Thanks for the kind words!!!

Can I use this for wooden dome house exterior water proofing,?

Hello and thank you for uploading this informative video. I am looking into using Liquid Rubber on a 5,000 sq ft. plywood patio deck. We fixed the plywood on multiple 2x6x12 wood boards with screws every 4 inches. There is a significant amount of screws. I noticed in your video that you only filled the plywood seams and not the dents from the screws. As such, is it not required to use wood filler nor the Geo-Textile on the plywood dents made from the screws? I would greatly appreciate your response. Thank you!

@LiquidrubberCa

2 жыл бұрын

Hi, Any imperfections such as screw holes, knots and splits should be prefilled with a water-based wood filler and for plywood decks we recommend reinforcing the seams with our Geo-Textile Fabric. Most coatings fail due to the fact that these areas, if left un-repaired, can allow water to get in and potentially blister the coating. The first step in any coating process is to repair the surface. Please feel free to reach out to Technical Support if you'd like to walk through your project. Technical@LiquidRubber.ca or 1-855-592-1049.

Can this product be used on wooden floors to seal before applying a self levelling concrete?? Many thanks for the answer in advance.

@LiquidrubberCa

4 жыл бұрын

Hi, you can use the Liquid Rubber Foundation Sealant to Waterproof before applying concrete on top. Please see here for more info - liquidrubber.ca/collections/all/products/foundation-sealant

Would this product work on a LockDry aluminum powder coated deck? In Canada my LockDry deck failed due to thermal expansion of freezing ice in the seepage channels. So I want to coat the entire deck to prevent the use of those channels to drain water. Can you advise please? 🙏

@LiquidrubberCa

3 жыл бұрын

Hi, there might be a combination of caulking and coating that works. It's best to talk with Liquid Rubber Technical Support to walk through your project. 1-855-592-1049 or Technical@LiquidRubber.ca

Thank you for providing this demo. Can you use this to treat the floor boards of an open utility/atv trailer? Is it durable enough to drive wheelers, etc on? Thanks

@LiquidrubberCa

Жыл бұрын

Hi, yes you can use the Liquid Rubber Polyurethane Deck Coating on an open trailer. The nice part is if the coating does get damaged along the way, you can always touch it up. If you want to walk through your project with Liquid Rubber Technical Support, email is Support@ShopLiquidRubber.com or 1-855-592-1049. You can also view more info here - shopliquidrubber.com/products/decks-and-balconies-sealing

@noelslater822

Жыл бұрын

@@LiquidrubberCa Thank you!

How easy to clean is this surface? I'd like to use it on my balcony. With the current paint I need to scrub the dirt out with a brush. Thanks

@LiquidrubberCa

4 жыл бұрын

Hi, the Liquid Rubber Polyurethane Deck Coating can be cleaned like any other surface. Use a quality cleaner if needed or power wash.

I want to gloss and see the woods details is there anything that see though?

@LiquidrubberCa

4 жыл бұрын

Hi, sorry but Liquid Rubber does not offer a solution at this time.

Where can I buy the stuff pls🙏

What did you do on the sides of the deck so it looks finished? Flashing only? Liquid rubber over the flashing down to drip ledge?

@LiquidrubberCa

3 жыл бұрын

Hi, on this project a flashing was used to wrap from the horizontal on to the vertical. The Flashing was rough sanded and wiped before applying the Liquid Rubber Polyurethane Deck System over. Liquid Rubber has great support to walk through your application if needed. 1-855-592-1049 or Technical@LiquidRubber.ca

@brendakilberg5727

3 жыл бұрын

@@LiquidrubberCa thank you for your reply. We are considering liquid rubber on our new deck and gathering as much info as possible! Your video was excellent in giving us an idea on how to do this method. Thanks again.

Can this product be used for covering the top joist for decks? Will I need a primer too or just the paint? How long does it typically last?

@LiquidrubberCa

2 жыл бұрын

Hi, for protecting the top of deck joists, typically the Liquid Rubber Foundation Sealant is used. It's expected to last the life of your deck.

I just installed the deck floor with Plywood, there are many little holes (inperfect surface) on the plywood surface, what kind of material I need to fill the holes before apply the Liquid Rubber? They don't used the galvanize nails, so the nails will be rusted after I apply the Liquid Rubber?

@ormalibu2056

3 жыл бұрын

Use wood filler

Can I install ceramic tiles on the roof deck?

@LiquidrubberCa

4 жыл бұрын

Hi, if you would like to install tile over the Waterproof Membrane, you can use the Liquid Rubber Foundation Sealant to Waterproof first. Please see here for more info - liquidrubberusa.com/collections/all/products/foundation-sealant

How does this hold up in changing conditions. Can be close to -40c in winter and sits around mid 30c all summer. Looking to redo a large deck.

@LiquidrubberCa

Жыл бұрын

Sounds like you might be in Canada. These products were developed in Canada to meet these needs. It might be best to walk through your project with Liquid Rubber Technical Support to answer any questions. 1-855-592-1049 or technical@liquidrubber.ca

How would I prep a deck if it is rough plywood. It does not have a smooth surface with aged plywood cracking.

@LiquidrubberCa

4 жыл бұрын

Hi, if your plywood is cracking, it's most likely not suitable for a coating. The plywood may continue to crack and damage the coating. Generally it's best to re-sheet and start fresh.

What about OSB floor? Can it be directly applied over an OSB subfloor/floor?

@LiquidrubberCa

3 жыл бұрын

Yes, you can use the Liquid Rubber Polyurethane Deck Coating over OSB. You can wall through your project with Liquid Rubber Technical Support as well. Technical@LiquidRubber.ca 1-855-592-1049

Hi I'm looking to get your product for sealing deck rails. What's recommended with a clear coat? Can I stain and then use over it?

@LiquidrubberCa

2 жыл бұрын

Hi, it might be best to walk through your project with Liquid Rubber Technical Support. Technical@LiquidRubber.ca or 1-855-592-1049

Could Liquid Rubber be used to water-proof second-story deck made from TimberTech (like Trex, but another company) and Dexerdry waterproofing splines between the boards? The dexerdry was not installed correctly so the deck leaks. Or, do I first need to recover the TimberTeck with new plywood before I apply the Liquid Rubber?

@LiquidrubberCa

11 ай бұрын

Hi, sorry to hear about the issues. You wouldn't want to go directly over your TimberTech and Dexerdry. Too many unknowns and potential for issues down the road. Your best bet would be to re-sheet and start fresh. Please touch base with Liquid Rubber Tech Support and they can walk you through the whole process. 1-855-592-1049 or Support@ShopLiquidRubber.com

I just built an OSB foundation for my shed. Can this be used on OSB boards ?

@LiquidrubberCa

2 жыл бұрын

Hi, if the foundation is going to be underground, use the Liquid Rubber Foundation Sealant to waterproof it and then use the Liquid Rubber Polyurethane Deck Coating for above ground application. You may want to walk through your application with Liquid Rubber Technical Support. Technical@LiquidRubber.ca or 1-855-592-1049

Could you use particle board laid down over an existing deck (already solid foundation - most boards good but want a flare surface)?

@LiquidrubberCa

3 жыл бұрын

Hi, yes you can use particle board. You'll want to rough up the surface before starting your application.

@kurtiscommerce1092

3 жыл бұрын

@@LiquidrubberCa awesome! Would I need to seal the entire piece of wood? Bottom and sides... to prevent warping since particle board does tend to warp

@LiquidrubberCa

3 жыл бұрын

@@kurtiscommerce1092 Yes, if you have moisture that will infiltrate the substrate, you'll need to protect it.

@kurtiscommerce1092

3 жыл бұрын

@@LiquidrubberCa awesome! Thank you!

@m.e.9974

Жыл бұрын

Yes,osb works,but use rough side up for optimal adhesion.

Can this be used in cold climates ie snow load? Can it be shovelled when cured ie snow shovelled off of deck?

@LiquidrubberCa

Жыл бұрын

Hi, yes the product can be used in cold climates. It's manufactured and used extensively in Canada. When shoveling the membrane, it's recommended to use a plastic shovel.

When the product eventually wears out, can it be patched? Or how do you repair it. I will assume it will have to be done again in 5 years due to the beach and sun where we live. Any info you can provide would be grateful. This seems to be the most easy waterproofing system I've seen.

@LiquidrubberCa

4 жыл бұрын

Hi, the Liquid Rubber Polyurethane Deck Coating can always be touched up if it gets damaged along the way. When it's coming to the end of its life, you'll clean and apply new Liquid Rubber Polyurethane Deck Coating.

@kbkb6569

4 жыл бұрын

@@LiquidrubberCa Thanks for the reply. So I don't need to some how remove all the material and start completely over? I can reapply entirely?

@kbkb6569

4 жыл бұрын

And shouldn't the flashing be screwed down to avoid a nail that works it's way up as the deck flexes and moves over time?

@LiquidrubberCa

4 жыл бұрын

Hi, yes you can apply entirely over the clean surface. Threaded nails or screws work well.

@kbkb6569

4 жыл бұрын

@@LiquidrubberCa thank you!

I'm putting down a new plywood deck/roof on my 25 foot rv. What product would be best suited for a liquid rubber roof if any?

@LiquidrubberCa

9 ай бұрын

Hi, you'll want to use the Liquid Rubber RV Roof Coating. The application is a little different since you're starting fresh from plywood. ie. Coverage is different, Bridging joints with the 3 course method (Geo-Textile). It's best to talk with Technical Support to give you the full application steps and coverage. Support@ShopLiquidRubber.com or 1-855-592-1049

Do you think this would stand up to active foot traffic like basketball or even ball hockey?

@LiquidrubberCa

3 жыл бұрын

Hi, it's a very durable coating. It will wear over time but the good part is you can just clean and re-coat.

I need a product i can put on my plywood deck that is already coated with Safety Deck product. Would this work or does it need to be put on clean uncoated plywood? Thanks for the help.

@LiquidrubberCa

2 жыл бұрын

Hi, it's best to talk through your project with Liquid Rubber Technical Support about the previous coating on the plywood. Technical@LiquidRubber.ca or 1-855-592-1049

Would this work on an aluminum surface if prepped properly?

@LiquidrubberCa

3 жыл бұрын

Hi, yes, the Liquid Rubber Polyurethane Deck Coating will work with Aluminum if prepared properly. It's best to reach out to Liquid Rubber USA support to walk through your project so you have all the proper info. Technical@LiquidRubber.ca or 1-855-592-1049.

I am thinking of using this product on a new 3/4” ACX pontoon deck. My only reservation is that I don’t like how at all the taped areas show through as a raised bump. Is there a way to make it look seamless at the joints? Any ideas out there?

@LiquidrubberCa

3 жыл бұрын

Hi, wood filler or caulking can be used as well. It might be best to walk through your application with Liquid Rubber Technical Support. Technical@LiquidRubber.ca. Or 1-855-592-1049

@sjyentsch

10 ай бұрын

Mmm

How about the adhesion to the existing epoxy coating?

@LiquidrubberCa

3 жыл бұрын

Hi, I'm not sure what you're asking. It might be best to speak with Liquid Rubber Technical Support (Technical@liquidrubber.ca) 1-855-592-1049

I am building a wooden pool can I use this to seal plywood for submerging in water?

@LiquidrubberCa

4 жыл бұрын

Hi, sorry but Liquid Rubber does not have a product for swimming pools at this time.

@1966johnnywayne

3 жыл бұрын

Hey Luke, I used it on my plywood submarine...it works fine. I'm letting the Mother In Law borrow it this weekend to see the Marianas Trench.

How it will perform on a outside deck near marine applications? (Salt water), At the end "Avoid hot intense sunlight", on the install or for the lifespan of the surfaces?. Thanks.

@LiquidrubberCa

5 ай бұрын

Hi, the Liquid Rubber Polyurethane Deck Coating performs really well with Salt Water. Avoiding hot intense sun is for application to prevent flash curing. If you'd like, Liquid Rubber Tech Support can walk through your project with you. 1-855-592-1049 or Support@ShopLiquidRubber.com. shopliquidrubber.com/products/decks-and-balconies-sealing

Will this product work on OSB?

@LiquidrubberCa

4 жыл бұрын

Hi, yes you can apply the Liquid Rubber Polyurethane Deck Coating system on OSB. Please see here for more info - liquidrubber.ca/pages/decks-and-docks-polyurethane-coating

Is this meant as a deck you can walk on, or a demo of a roof surface? Can I cover a fiberglass / vinyl deck that might be leaking a bit with this?

@LiquidrubberCa

4 жыл бұрын

Hi, this is a video example of a walking deck. Yes you can apply the Liquid Rubber Polyurethane Deck Coating to a vinyl deck. Follow the same process as the Plywood deck but rough up the surface first.

@sugarengine

Жыл бұрын

Follow up three years later. This worked fantastic, and not a drip since.

is there any way to apply it so you dont see the seams and the geo-textile? because the edges dont look that nice.

@LiquidrubberCa

4 жыл бұрын

Hi, it's pretty tough to hide the seams entirely as it's important to bridge the seams with Liquid Rubber Geo-Textile. It's similar to a vinyl sheet deck application that has seams as well.

@cm-ex8nb

4 жыл бұрын

@@LiquidrubberCa yeah but with vinyl you can router the plywood where the seams land so they sit flush. I just wonder if there would be a way maybe build up the liquid rubber so it's not there. What about using the seam filler on the edges to make it flat?

@LiquidrubberCa

4 жыл бұрын

@@cm-ex8nb It's tough to build up that much coating. It would be best to router, sand the wood down creating a little valley along the seams to reduce the height.

@DadYouNeverHad

3 жыл бұрын

If you don't want to see those seams, you have to countersink the flashing by routing/planing the edges by the thickness of the flashing, and then using an unbroken sheet of geo textile cloth across the entire deck.

@DrGreen-wl2ry

2 жыл бұрын

What I did was for your first coat (or 2 depending) you only apply to the wood and not over the geo-tex or flashing. This allows a height build up to help hide it. Worked out very well for me.

Hello great video. My idea is to replace the cloth gazebo top with plywood and use the this product over top of the plyboard. Will this survive all 4 seasons, and for how long?

@LiquidrubberCa

2 жыл бұрын

Hi, if this project will act as a roof, you'd want to look at using the Liquid Rubber Color Waterproof Sealant. liquidrubberusa.com/pages/torch-down-mod-bit-roofs. If you'd like to speak with Technical Support to walk through products, coverage, application... they can be emailed at Technical@LiquidRubber.ca or 1-855-592-1049

@cameranmanner4701

2 жыл бұрын

@@LiquidrubberCa thanks. Whats the difference between this product and regular liquid rubber. UV protection?

@LiquidrubberCa

2 жыл бұрын

@@cameranmanner4701 The Liquid Rubber Polyurethane Deck Coating is a harder finish with lower flexibility designed for foot traffic (ie. deck). The Liquid Rubber Waterproof Sealant and Liquid Rubber Color Waterproof Sealant have more flexibility and are designed for roofs. They're also a lower price point.

Why is a compatible caulking if I need to drill a post through??

@LiquidrubberCa

4 жыл бұрын

Hi, you can use a good quality exterior Polyurethane Caulking around posts.

I’ve got this on an existing deck already. But it’s bubbling and peeking in a low spot where water sits. Can I put salt leveling concrete on top and then re-coat the concrete?

@LiquidrubberCa

Жыл бұрын

Hi, we haven't tested this between coats. Assuming it is a wood deck...The best way to level a deck is by repairing the framework itself. If that cannot be done, then you can use an exterior rated self levelling compound directly to the deck (wood or concrete) itself. I would recommend speaking with the levelling compound manufacturer to ensure it will bond well to our acrylic/polyurethane formulation (a bonding agent may be recommended). The risk is the levelling compound is not bonded to our coating and ends up floating between layers (eventually penetrating via movement of a sharp edge). Also, when reapplying our Polyurethane over top of the levelling compound, they should reapply at full coverage rate. Applying too thin may again result in blistering. (and make sure the levelling compound is fully cured prior to application.) Please reach out to us with any questions. 1-855-592-1049 or Support@ShopLiquidRubber.com

Can I use this products in snow covered decks during winter months in Wisconsin?

@LiquidrubberCa

3 жыл бұрын

Hi, yes the Liquid Rubber Polyurethane Deck Coating can be used in climates with snow and cold. The product is developed in Canada. It's recommended to use a plastic shovel so you don't gouge the coating. The good part is you can always touch up if it does get damaged.

@MK-de8wi

3 жыл бұрын

Can I use this item on UV finished  birch veneer plywood on the balcony outside?

@LiquidrubberCa

3 жыл бұрын

@@MK-de8wi Yes, give it a rough sand to promote adhesion first.

Best

We just framed the deck. Is this an alternative to vinyl and can it with stand the pressure of sleepers that have 5/4"×6 cedar 12' . Also can this be applied to existing torch on ?

@LiquidrubberCa

9 ай бұрын

Hi, I'm not exactly sure what you're entire project is. Sounds like you may be building a deck over a roof perhaps. It would be best to walk through your whole project to give you the best possible guidance. Please touch base with Liquid Rubber Tech Support. 1-855-592-1049 or Support@ShopLiquidRubber.com

@user-hz1yt3kk1g

Ай бұрын

What was the results of this answer? I have the exact same question

Can this product be used on galvanized flashing?

@LiquidrubberCa

2 жыл бұрын

Hi, yes it can. Just rough up the surface with some low grit sandpaper. ie. 80 grit

I am a beekeeper and need a waterproof surface on the floor to pressure wash once the honey has been extracted. Will this hold up to that? It's a plywood floor to start with. Thanks.

@LiquidrubberCa

3 жыл бұрын

Hi, yes the Liquid Rubber Polyurethane Deck Coating stands up to pressure washing very well.

would this be good for a skate ramp?

@LiquidrubberCa

3 жыл бұрын

Hi, I'm assuming you want to protect plywood from the elements. Yes, the Liquid Rubber Polyurethane Deck Coating will work for this use. It may be best to talk through your project with Liquid Rubber Technical Support first to get the best advice. 855-592-1049 - techncial@liquidrubber.ca

Can I install tile on this or will I have to buy the cement boards?

@LiquidrubberCa

3 жыл бұрын

Hi, if you'd like to create a waterproof liner and install tile over, you'll want to use the Liquid Rubber Foundation Sealant. Please see here for more info - liquidrubberusa.com/pages/shower-liners.

@sonnynguyen8012

3 жыл бұрын

If you like to install tile on it, you have to screw down cement board.

looks like a great product , could it be used on my inclosed trailer floor its a 3/4 plywood floor

@LiquidrubberCa

2 жыл бұрын

Hi, yes you can definitely use the Liquid Rubber Polyurethane Deck Coating on an inclosed trailer.

Just wondering if the liquid rubber can be applied on top of old plywoods?

@LiquidrubberCa

2 жыл бұрын

Hi, yes the Liquid Rubber Polyurethane Deck Coating can be applied on top of old plywood. Be sure to prep with Liquid Rubber Deck Cleaner first.

Will this work on a deck with Duradek vinyl decking?

@LiquidrubberCa

Жыл бұрын

Hi, yes you can use the Liquid Rubber Polyurethane Deck Coating over Duradek. Please refer to the Liquid Rubber Deck Project Page and Application Guideline - shopliquidrubber.com/products/decks-and-balconies-sealing. Liquid Rubber Technical Support can walk you through your project as well. 1-855-592-1049 or Support@ShopLiquidRubber.com

Can I use textured coating for all coatings?

@LiquidrubberCa

3 жыл бұрын

Hi, you can use the Liquid Rubber Polyurethane Textured Deck Coating for all coats. You do not have to use both the Smooth and Textured. Depends on what profile you're looking for.

@barryunderwood2036

2 жыл бұрын

I didn’t see the non textured product in the video. Are there 2 separate products or just what roller is used to apply it?

Where can I buy your products in Ontario? How much it cost for material per square foot please?

@LiquidrubberCa

3 жыл бұрын

Hi, you can buy Liquid Rubber products through the Online Store at liquidrubber.ca/ which ships direct to your door and Free over $75. You can also choose a pickup option from Oakville, Ontario as well. Generally for the Liquid Rubber Polyurethane Deck Coating, final cost is approximately $1.50 per sq ft.

Hello, is the shown "liquid rubber" plasticizer-resistant (e. g. no migration of carbon black from car tires / no permanent or irremovable yellowish markings like on PVC caused by multiple normal drive over)? How smooth it can be made (uneven surface causes trapping of contamination/dirt between the coating "hills" and time consuming cleaning)? Thanks.

@LiquidrubberCa

4 жыл бұрын

Hi, the Liquid Rubber Polyurethane Deck Coating is not meant for vehicle traffic. It's a medium traffic coating generally for foot traffic. We're working on a garage floor coating which should be available in 2021.

Hello, can i have the name of the glue that you are using in joined tape? And also the brand name of liquid rubber polyurethane

@LiquidrubberCa

3 ай бұрын

Hi, the 3 course method is being used to apply the Geo-Textile with Liquid Rubber Multi-Purpose Primer. This reinforces the joints and seams. Then the Liquid Rubber Polyurethane Deck Coating is applied on top. You can view more info on this page - shopliquidrubber.com/products/decks-and-balconies-sealing

Is this product similar or same with FLEX SEAL?

@LiquidrubberCa

3 жыл бұрын

Hi, the Liquid Rubber Polyurethane Deck Coating is not similar to Flex Seal. This is designed specifically to balance the hardness, durability and flexibility decks need.

I have a question. if the surface is damaged by hot grease, can it be patched or do we need to redo the entire surface? Thank you!!

@LiquidrubberCa

Жыл бұрын

Hi, if the coating gets damaged, you can always clean up and patch the area.

@imMsPear

Жыл бұрын

@@LiquidrubberCa Thank you so much for the reply! We will try it this weekend after ordering the products of amazon.

@LiquidrubberCa

Жыл бұрын

@@imMsPear Sounds good. If you have any questions along the way, please let us know. Technical@LiquidRubber.ca or 1-855-592-1049

Hello, what color is the deck coating paint in this video please?

@LiquidrubberCa

Жыл бұрын

Hi, that is the Liquid Rubber Polyurethane Deck Coating - Misty Gray - shopliquidrubber.com/products/polyurethane-deck-coating?variant=42521006735614

Can you use it on fibreglass ?

@tuckerjt1967

3 жыл бұрын

Why tf would you put it on fiberglass it’s already water proof

Would it be possible to only use 4 coats of textured paint and not cover with the smooth?

@LiquidrubberCa

2 жыл бұрын

Definitely. You can use just the Textured. The surface will be more coarse. You chat with Liquid Rubber Technical Support - Technical@LiquidRubber.ca or 1-855-592-1049

How long does this late? I live in Southern Ontario. I have an uncovered cantilevered balcony and the plywood needs to be waterproofed to prevent the joists from rotting. The only alternative to this that I see is vinyl decking. It rains a lot here. And of course freeze thaw cycles every year. Do you recommend this product?

@LiquidrubberCa

2 ай бұрын

Hi, there's a 3 year warranty on the deck application. Generally you can expect 5+ years before touching up. You can see more info here - shopliquidrubber.com/products/decks-and-balconies-sealing. If it might help, Liquid Rubber Product & Application Support can walk through your project with you to answer any questions. 1-855-592-1049 or Support@ShopLiquidRubber.com

Built an outdoor ramp 3 1/2 ft by 8ft. I'm worried Liquid rubber will be slick to walk up when wet. Any feed back will be appreciated

@LiquidrubberCa

4 ай бұрын

Hi, the Liquid Rubber Polyurethane Deck Coating comes in a Smooth & Textured Version for areas needing more grip. You can use just the Textured version with a Textured Roller to get a pretty aggressive finish. If you'd like to walk through your project with Liquid Rubber Product & Application Support, please give us a call at 1-855-592-1049 or email Support@ShopLiquidRubber.com. Here's the product page for your reference - shopliquidrubber.com/products/polyurethane-deck-coating

Could this be used over a concrete deck

@LiquidrubberCa

2 жыл бұрын

Hi, yes you can apply the Liquid Rubber Polyurethane Deck Coating on Concrete. It's a similar application. You can see more info here - kzread.info/dash/bejne/p6GIz9SLqZaTZpM.html

Can you apply this over top of old Vinyl Duradek?

@LiquidrubberCa

7 күн бұрын

Hi, yes you can apply Liquid Rubber Polyurethane Deck Coating over Vinyl Duradek. Please see this page for more details and an application guideline - shopliquidrubber.com/products/decks-and-balconies-sealing. If you'd like to walk through your project with Liquid Rubber Product & Application Support, please call 1-855-592-1049 or email Support@ShopLiquidRubber.com.

Should I use the 3 foot wide clothto create a continues membrane and does the sun brake it down and is it uv fade resistant?

@LiquidrubberCa

2 жыл бұрын

Hi, yes you can use a wider cloth if desired. The Liquid Rubber Polyurethane Deck Coating is UV stable. It can always be touched up down the road if needed.

How durable is this?... I would like to do exactly what is done in this video... plus set free floating pavers over it... probably with sand under the tiles...

@LiquidrubberCa

2 ай бұрын

Hi, the Liquid Rubber Polyurethane Deck Coating is very durable. We have a couple options that might work for your project to waterproof and then lay pavers over. It might be best to speak with Liquid Rubber Product & Application Support to walk through your project. 1-855-592-1049 or Support@ShopLiquidRubber.com

How fast would UV light perish the coating ?

@LiquidrubberCa

Жыл бұрын

Hi, depending on conditions the lifespan is expected to be 5 - 10 years before re-coating.

Can I use this on my boat

@LiquidrubberCa

4 жыл бұрын

Hi, yes you can use the Liquid Rubber Polyurethane Deck Coating on a boat. Feel free to reach out to Liquid Rubber Technical Support to chat about your project first.

@shahidakaladshahidshazzz8525

3 жыл бұрын

yes

If the deck is painted, do we need to sand it before applying the primer?

@LiquidrubberCa

9 ай бұрын

Hi, you can coat over previous paint that is well adhered and rough sanded. Please see the application guideline here - shopliquidrubber.com/products/decks-and-balconies-sealing and reach out to Liquid Rubber Tech Support with any questions. Support@ShopLiquidRubber.com or 1-855-592-1049

So are you using exterior grade plywood or any plywood you wish?

@LiquidrubberCa

5 жыл бұрын

Hi, you can use any quality Plywood.

@Lanyappi

5 жыл бұрын

3/4-inch 4x8-foot sheets marine plywood

@ChristinaMitchell-USA

4 жыл бұрын

@@Lanyappi 3/4-in marine plywood! Really? For the cost of marine plywood, one might as well just use composite wood decking planks!

@stevewilliams5548

4 жыл бұрын

Any

@stevewilliams5548

4 жыл бұрын

@@LiquidrubberCa can you use any plywood u want

What is the all the materials used in this video?

@LiquidrubberCa

4 жыл бұрын

Hi, you can find all the materials on this page - liquidrubberusa.com/pages/decks-and-docks-polyurethane-coating. Liquid Rubber Technical Support is Technica@liquidrubber.ca

Wondering if I could use this as the floor base for my pontoon boat, I want to pull the carpet up and put this down. Do you think it’s that waterproof on my pontoon boat?

@LiquidrubberCa

4 жыл бұрын

Hi, yes you can use the Liquid Rubber Polyurethane Deck coating for your pontoon boat floor. liquidrubberusa.com/pages/decks-and-docks-polyurethane-coating, liquidrubberusa.com/collections/all/products/polyurethane-deck-coating?variant=12135321829469

@eaglesurfraft4941

4 жыл бұрын

very good n neat job man .appreciate.will last long even in bad weather.from small island Mauritius.GOD bless

Can you paint over it?

@LiquidrubberCa

4 жыл бұрын

Hi, the Liquid Rubber Polyurethane Deck Coating comes in different colors and is not meant to be painted over.

Is there a product like this that can be tiled over?

@LiquidrubberCa

4 ай бұрын

Hi, have a look at the Liquid Rubber Foundation Sealant. It provides a waterproof membrane and can be tiled over at a lower cost. This video is an example of using the Foundation Sealant as a waterproof membrane under a concrete patio - kzread.info/dash/bejne/hZiaz86torzgYbw.html. You can see the product on this page - shopliquidrubber.com/products/foundation-sealant?variant=42521006309630. Liquid Rubber Product & Application Support can walk through your project with you as well. 1-855-592-1049 or Support@ShopLiquidRubber.com

Where can i get that metal

@LiquidrubberCa

4 жыл бұрын

Hi, you can buy flashing at a local home improvement store.

Hello, after applying the primer, i see that the person in this video is walking on top of primer. 1. Will that not be sticky to walk? 2. And walking on the tacky primer will ruin the primer? I have a a large 34x16 ft second storey flat roof balcony. Its too large to apply all at once. 3. how do you propose i divide the primer and coating into doable sections? Thank you.

@LiquidrubberCa

4 ай бұрын

Hi, the Liquid Rubber Multi-Purpose Primer is not sticky or tacky when dry/cured. You can walk on it while coating on top. You may be thinking of the Liquid Rubber EPDM & TPO Primer which is sticky when cured. For that one, you have to work in manageable sections so you don't have to walk on it. If you'd like Liquid Rubber Product & Application Support to walk through your project with you, please touch base at 1-855-592-1049 or Support@ShopLiquidRubber.com. You can see more info here as well - shopliquidrubber.com/products/decks-and-balconies-sealing

Is this wise to use on a plywood floor in my campervan ?

@LiquidrubberCa

3 жыл бұрын

It's a great option to protect your floor from moisture, dirt and rot. It's easy to apply and wash out. Campers can take a lot of abuse and it's nice to have a level of protection.

@KaptainKastle

3 жыл бұрын

@@LiquidrubberCa ok great. Thank you. I assume it's ok to walk on. Not too soft and bouncy

@LiquidrubberCa

3 жыл бұрын

@@KaptainKastle For sure, it's a strong durable Coating. Not soft.

@KaptainKastle

3 жыл бұрын

@@LiquidrubberCa thank you, I'm going to give it a go

Can I use it at boat flooring?

@rayschultz1663

4 жыл бұрын

Hi, yes the Liquid Rubber Polyurethane Deck Coating has been used on wood boat floors.

@valmin5589

4 жыл бұрын

@@rayschultz1663 is it available off the shelf in the USA?

@LiquidrubberCa

4 жыл бұрын

Hi, just online at liquidrubberusa.com/ and Amazon currently.

Contact please ma play ka bbusiness karna chatahu

Will Liquid Rubber adhere to epoxy paint?

@LiquidrubberCa

11 ай бұрын

Hi, there are a number of different Liquid Rubber Coatings and different applications to consider. For the best advice, please touch base with Liquid Rubber Technical Support to walk through your project. 1-855-592-1049 or Support@ShopLiquidRubber.com

Can I use this om bathroom floor

@LiquidrubberCa

2 жыл бұрын

Hi, yes you can use the Liquid Rubber Polyurethane Deck Coating on a bathroom floor. You can walk through your project with Liquid Rubber Technical Support. Technical@LiquidRubber.ca or 1-855-592-1049

How’s it holding so far

@LiquidrubberCa

3 жыл бұрын

Holding up really well

Does this stand up to foot traffic

@LiquidrubberCa

3 ай бұрын

Hi, yes the Liquid Rubber Polyurethane Deck Coating stands up to foot traffic. There's a Smooth option and a Textured option if you're looking for a little more grip. Please see this page for more info - shopliquidrubber.com/products/decks-and-balconies-sealing. Liquid Rubber Product & Application Support can walk through your project with you if that might help. Support@ShopLiquidRubber.com or 1-855-592-1049.

Is it hot to walk on in bare feet when the sun has been beating down on it?

@rayschultz1663

4 жыл бұрын

Hi, the Liquid Rubber Polyurethane Deck Coating will feel like a regular paint for heat from the sun. If sun/heat is a major issue you can look at using the Liquid Rubber Cool Foot Deck Coating. This product reduces heat transfer to your foot by up to 30% over regular paint. You can see more info here - liquidrubberusa.com/collections/all/products/cool-foot-coating?variant=26026160323

how long will this last?

@LiquidrubberCa

2 жыл бұрын

Hi, depending on conditions, the Liquid Rubber Polyurethane Deck Coating is expected to have a lifespan of 5 - 10 years before needing a re-coat.

I'm concerned this won't hold up to constant foot traffic on the main entrance to a home. I'm trying set up maintance free conditions for my daughter's home for when I'm gone. I'm looking for something that will last for the long haul. If it's a matter of just reapplying, that's ok but I can't see her tearing this up for a redo.

@LiquidrubberCa

2 жыл бұрын

Hi, you can re-coat the Liquid Rubber Polyurethane Deck Coating if it gets worn or damaged. You may want to consider a composite type of decking perhaps for longevity.

My dad (280 lbs) rolls around in a desk chair in his shed turned woodshop with plywood floors. Will this stand up to this kind of traffic?

@LiquidrubberCa

Ай бұрын

Hi, no problem rolling on the floor. The Polyurethane Deck Coating is really strong and durable. You can see more info on this page and if you want, you can walk through your project with Liquid Rubber Product & Application Support. 1-855-592-1049 or Support@ShopLiquidRubber.com. shopliquidrubber.com/products/decks-and-balconies-sealing

@suzabakingbaked7975

Ай бұрын

@@LiquidrubberCa thank you for the response

@LiquidrubberCa

Ай бұрын

@@suzabakingbaked7975 - You're so welcome. Please reach out with any questions along the way :)

Can you add title later to this surface?

@LiquidrubberCa

5 жыл бұрын

Hi, I'm not sure if "title" is a typo? Did you mean Texture? You can add Texture at a later time but it's best to do coats in tandem for best adhesion.

@cm-ex8nb

4 жыл бұрын

@@LiquidrubberCa i think they meant tile

@LiquidrubberCa

4 жыл бұрын

Hi, if you want to waterproof a surface and then tile over, you can use the Liquid Rubber Foundation Sealant. Please see here - liquidrubberusa.com/collections/all/products/foundation-sealant?variant=26026234051. Liquid Rubber has great technical support, application info and videos.

Can I just paint it over to old paint??

@LiquidrubberCa

4 жыл бұрын

Hi, if the existing paint is well adhered and clean, you can apply over.

@parodyteevee189

4 жыл бұрын

Liquid Rubber thanks a lot! And is this only sold online???🙂🙏🏻🙏🏻🙏🏻

@parodyteevee189

3 жыл бұрын

The best!!!!

Can i use this on mygarage floor

@LiquidrubberCa

Жыл бұрын

Hi, unfortunately Liquid Rubber does not have a solution for garage floors with vehicle traffic. The hot tires and twisting are really tough on a coating. You can look for some Epoxy versions as an option for garage floors. Generally the more robust options are applied specialized contractor as the prep (grinding) is very important.

@moehamdan6785

Жыл бұрын

@LiquidrubberCa I'm not using it as a car garage just a seating area as a living room so just foot traffic would that still be ok

@LiquidrubberCa

Жыл бұрын

@@moehamdan6785 Yes, you can use the Liquid Rubber Polyurethane Deck Coating. Essentially the application would be like a concrete patio or balcony since it's not having vehicle traffic. You can see more info on the Liquid Rubber Deck Project page found here - shopliquidrubber.com/products/decks-and-balconies-sealing. Liquid Rubber Technical Support can walk through your project with you as well. 1-855-592-1049 or Support@ShopLiquidRubber.com

So we are looking at $300 for the product plus the plywood sheets?

@LiquidrubberCa

2 жыл бұрын

Hi, depending on the area you have to cover. The Liquid Rubber Polyurethane Deck Coating 5G pail is $299.95 USD and final coverage is approximately 200 sq ft.

How has this held up 30 months later?

@LiquidrubberCa

2 жыл бұрын

It's performed really well. Very happy with the longevity.

@ParadoxTeg

2 жыл бұрын

@@LiquidrubberCa Any photos or video of this?

can not use it on existing deck

@LiquidrubberCa

Ай бұрын

Hi, if you have any questions about your deck and compatibility, Liquid Rubber Product & Application Support would be happy to walk through it with you. 1-855-592-1049 or email Support@ShopLiquidRubber.com.

❤❤❤❤

@LiquidrubberCa

6 ай бұрын

😁

Would liquid rubber survive salt water?

@LiquidrubberCa

3 жыл бұрын

Hi, yes Liquid Rubber stands up great to salt water.

@davidvalens3337

3 жыл бұрын

@@LiquidrubberCa how would it compare to red guard

@LiquidrubberCa

3 жыл бұрын

@@davidvalens3337 The Liquid Rubber Foundation Sealant is comparable used as a waterproof membrane on showers. It's much more cost effective than Red Guard.

@davidvalens3337

3 жыл бұрын

@@LiquidrubberCa what's the best website to buy this from?

@LiquidrubberCa

3 жыл бұрын

@@davidvalens3337 For the US - liquidrubberusa.com/ and for Canada - liquidrubber.ca/

Anyone ever use this on a plywood wall that faces direct rain ?

@LiquidrubberCa

2 жыл бұрын

Hi, we have another product that might be the best solution for a plywood wall. Liquid Rubber Colored Waterproof Sealant. it may be best to walk through your project with Liquid Rubber Technical Support. Technical@LiquidRubber.ca or 1-855-592-1049

Wait.... it's supposed to be for decking but you should avoid hot, intense sunlight?

@LiquidrubberCa

4 ай бұрын

Hi, sorry for the confusion. It's during application of the coating that you should avoid hot, direct intense sunlight. What can happen is the coating can cure too fast and you'll get lines in your surface. Best to work in cooler times like the morning if it gets really hot out in the middle of the day. Please let us know if you have any questions. We can walk you though your product and application as well if wanted.

@stephaniedormaier1189

4 ай бұрын

@@LiquidrubberCa Ohhhh... Thank you so much for the clarification! Building a new deck now and had a small panic attack. We get intense summer heat but just during curing makes sense. Thanks Again!

@LiquidrubberCa

4 ай бұрын

@@stephaniedormaier1189 - We do have another deck coating option as well that you may want to consider. It's the Liquid Rubber Cool Foot Deck Coating for areas that get extremely hot. It reduces the heat transfer from the deck to your foot. The Liquid Rubber Polyurethane Deck Coating does not have the "cooling" feature but is a more robust deck coating.

I clicked on your link and I feel mislead. The product says its not meant for walking on. 😒

@LiquidrubberCa

3 ай бұрын

Thanks for bringing this to our attention. I see the link goes to the wrong product. We'll get this fixed up. It should have gone to the Liquid Rubber Polyurethane Deck Coating. You can find the link here - shopliquidrubber.com/products/polyurethane-deck-coating. Sorry for the trouble and if you want, Liquid Rubber Product & Application Support can walk through your project with you. 1-855-592-1049 or Support@ShopLiquidRubber.com

Expansion space is filled with wood filler?! Every plywood/OSB manufacture requirement is 1/8" expansion joints. I cannot risk not following the plywood manufacturers guidelines. Had liquid rubber researched this before making this video? What is the alternative? I saw other instructions elsewhere where only voids were filled, not expansion joints. Please clarify!

@user-eg8hb8xt3j

3 ай бұрын

Please explain how t&g plywood works ? 😂😂

@LiquidrubberCa

3 ай бұрын

Hi, for existing plywood decks, generally voids and joints are filled with wood filler or Liquid Rubber Sealant & Adhesive. For new plywood to allow for the expansion joints, fill with Liquid Rubber Sealant & Adhesive. Perhaps it might be best to walk through your project directly with Liquid Rubber Product & Application Support so you have all the info needed. 1-855-592-1049 or Support@ShopLiquidRubber.com

@LiquidrubberCa

3 ай бұрын

@@user-eg8hb8xt3j Hi, T&G Plywood is "Tongue and Groove". Essentially on one side of the plywood you have an extension strip that slides into a slot on another piece of plywood. It's a locking/joining system to make the joints more solid and reduce movement. If you'd like to talk it through, please call Liquid Rubber Product & Application Support at 1-855-592-1049 or Support@ShopLiquidRubber.com

Hmm, Geo-textile, plus primer, plus liquid rubber, plus shipping, seems like we're talking about $3/sq ft which is pretty ridiculous to do by starting out with plywood instead of proper pressure treated deck planks.

@ps4ky

Жыл бұрын

You want ridiculous? I live in a condo complex where the balcony spec is 5x10 marine ply. Wish I had the option of deck planks. This product actually looks like a good option instead of the annual latex repaint.

@user-eg8hb8xt3j

3 ай бұрын

lol your comment is ridiculous

The galvanized roofing nail edge with the tape looks like dog

The text never stays up long enough at times.. it's annoying.

@LiquidrubberCa

4 жыл бұрын

Sorry about the trouble, you can find a full application guideline here - liquidrubberusa.com/pages/decks-and-docks-polyurethane-coating