I can’t believe we had this unit unplugged for a year. I resolved to take it to the dump a few weeks ago but as a last ditch effort I googled to find a repairman. Thid video came up and I recognized the unit on the picture. What do you know? This was the solution! ❤️ Thank you!!!

@torontodiy

Күн бұрын

Glad to hear that 👍

Omg we were about to call technician because our water dispenser stopped working only to know that the hose got loosen up. Thank you!

@torontodiy

2 ай бұрын

Glad to hear that 👍

Thank your shearing. My dispenser didn't suck these days. After watch your video, I push tubes tightly to the joint, and it works. 👍👍👍

@torontodiy

9 ай бұрын

I’m glad. Thanks for watching

Thanks so much! I thought I would need to buy a new one. So happy right now. Love my water cooler.

@torontodiy

7 ай бұрын

Glad to hear, and thanks for watching

Thank you!! I had the empty bottle flashing light I just pushed the line in and it’s fixed. Thank you again.

@torontodiy

3 ай бұрын

Glad to hear that 👍

Thank you! You saved me over $300!!

Thank you! I was so frustrated, and this did the trick.

@torontodiy

11 ай бұрын

Thanks for watching👍 pls consider to subscribe🙏

Thanks so much. Worked like a charm!

@torontodiy

4 ай бұрын

Glad it helped!

Hey thank you so much, after I watched your video I fixed mine after a few weeks. Thanks again

Thank you! This helped so much, I thought I had to buy a new one!🙌

@torontodiy

5 ай бұрын

My pleasure to help

Hii bro!!! My room temperature button does not expels room temperature water 😢, it expels cold water like cold button. (Mine is brand new.) That happened to you? Maybe mine is wrong? Or maybe a factory defect??

Thank you! I couldn’t figure out until I searched how to fix this! ❤

@torontodiy

7 ай бұрын

Glad to hear that👍

I use the glass bottles and I have the one where the hose is hidden looks like i would have to disassemble a lot of stuff

The cold water icon keeps flashing and does not dispense cold water anymore could this be a filter issue? Or what could this be?

Thank you! This helped me!

@torontodiy

2 ай бұрын

Glad to hear that 😀

I turn both switches on but the cold water still doesnt dispense, what else do you suggest

@jaybee1086

2 ай бұрын

I have the same issue.

Thank you sir! Very helpful

@torontodiy

7 ай бұрын

Glad to hear that 👍

Thank you very much sir, I fix the problem, have a great day always…

@torontodiy

7 ай бұрын

Happy to help

I checked to be sure the hose was not loose on either end. I unplugged it, and waited for a few minutes to see if it would reset. When I plugged it back in, I heard the motor start up. I gave it an hour for the hot water to get hot and see if the hot water would pump, but it didn't, the normal water did pump. Yesterday the water bottle was empty, I bought more water today. The cold hasn't pumped for about a year, I just used the hot water. After unplugging it again and waited a few minutes, I replunged it, and this time I didn't hear the motor. What do you suggest?

@torontodiy

4 ай бұрын

Check the back of your dispenser and turn it on both hot and cold switches. All water dispensers are just have one supply pump just make it sure that all the tubing are properly hooked up and your water cabinet door are securely closed. I hope this helps.

@kenttran5289

Ай бұрын

I have the Costco Hamilton Beach bottom load and I have the same problem. After opening the top cover, I see the valve ear has been cracked so when I push the dispense button, it open the valve slightly. That is why my hot water starts to slowly decrease over a day or two. A viable fix is to swap the valve that I don't use. I also have an Avalon dispenser where the water on the hot side start to drip. On that one the valve wear down because of the hot water eat way the valve lip. It gets corroded\ pitted that is why it can an seal. I am looking for a more reliable dispenser.

@torontodiy

Ай бұрын

Primo must be good option

@torontodiy

Ай бұрын

Check it out all the tubing. Just push it a little. The motor doesn’t pump if there’s one tube is loose. And for the hot and cold, check at the back of your dispenser, turn on both hot and cold switches.

Thank you very much.

@torontodiy

6 ай бұрын

My pleasure 👍

Thank you!

@torontodiy

Жыл бұрын

My pleasure 👍

Hi pal. We are thinking to buy this brand, thanks for sharing. Is it a good option, long lasting?

@torontodiy

Жыл бұрын

Thanks for watching and consider to subscribe to watch my other videos

I just did tht and the light still blinking it’s frustrating and my water is not even cold

@torontodiy

11 ай бұрын

At the back of the unit turn on both cold and hot, and the water supply switch in to two

@quinndiesel3411

11 ай бұрын

I'm having the same issue. We don't use a bottle, we have a filter. After using it, it blinks orange and doesnt get cold. I have to unplug it for a while and back in to get it to reset.

@TheKimichan

Ай бұрын

I’m having that problem. The cold water light is blinking red and the water is not cold. I tried unplugging it for awhile couple times but no change,

Mine doesn't cool the water does anyone have this probpem?

Thanks really help-full

@torontodiy

Жыл бұрын

Thank you, pls consider to subscribe 👍

Thank you for sharing... ❤️

@torontodiy

6 ай бұрын

My pleasure 👍

2:20

It worked 💪

@torontodiy

4 ай бұрын

Flad to hear that😀

My cold side is not pumping out cold water or as fast anymore? But got side is. What’s my issue?

@torontodiy

Жыл бұрын

Check the back panel there’s a switch for hot and cold line you should turn on both.

My hot water side isn’t working please help

@torontodiy

8 ай бұрын

You can check the back panel of your dispenser, there is switches for cold and hot, it might be rhe hot is off

@munchykit6436

3 ай бұрын

True… but honestly modern videos have really spoiled us. I think we don’t have the patience anymore to listen to a real person talking. There’s awkward breaks, we need to inhale.. etc. this is how a normal person speaks and we just don’t listen as good as we used to before technology took over.

This did not work for me.

@torontodiy

Жыл бұрын

Your water supply should be turned on to bottle if your using the bottle

Editing would save this video

@torontodiy

10 ай бұрын

My apologies, I don’t really know how to edit videos. Just wanted to share whatever I could. It maybe helpful to someone. Thanks for watching anyway.

My is brand new and I tried that it doesn’t work

@torontodiy

4 ай бұрын

Check the back panel and turn on the switches

@nays8618

4 ай бұрын

@@torontodiy I only see one switch in the back the I/O

@torontodiy

4 ай бұрын

Then turn that on

@nays8618

4 ай бұрын

@@torontodiy it’s on I

Great information. Simple fix! Thank you!

@torontodiy

3 ай бұрын

Glad to hear 😀