Washing Machine Repair - Replacing the Lip Seal Kit (Whirlpool Part # 12002022)

Тәжірибелік нұсқаулар және стиль

www.partselect.com/PS2003500-W... Click here for more information on this part, installation instructions and more.
This particular Lip Seal Kit is specific to Whirlpool manufactured brands including Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Glenwood, and Caloric. To find a lip seal kit specific to your model, visit www.PartSelect.com.
If your washing machine is having any of these symptoms, then replacing the lip seal kit could solve your appliance problem.
1) Loud whining or high pitched noise while the washer is in the spin cycle
2) Leaking water
PartSelect Part Number: PS2003500
Whirlpool Part Number: 12002022
Tools used for this repair/replacement:
1) Phillips Screw Driver
2) ¼ Inch & 5/16th Nut Driver
3) Large Flat Blade Screw Driver
4) 9/16ths Wrench
5) Large Hammer
6) Torque Wrench with 9/16ths Socket
7) Block of wood
Get model-specific repair help from PartSelect.com. Learn how to troubleshoot, diagnose and repair your appliance with user-generated installation instructions, hundreds of step-by-step repair videos, and our Instant Repairman. If you've got an appliance problem, we can help www.partselect.com/Instant-Rep...

Пікірлер: 6

  • @ChannelMitchy13
    @ChannelMitchy1310 жыл бұрын

    I am glad he cleaned off the bearings at minute 8:00 so I could see the part numbers. You can get the bearings separate without ordering the entire outer tub assembly.

  • @gtrjoe68
    @gtrjoe6811 жыл бұрын

    My Fisher paykel is 15 year old, and still going strong. Best washer and dryer out there.

  • @mrtheloverboy89
    @mrtheloverboy8910 жыл бұрын

    Hello Do you have a video on how to replace the bearings?

  • @ChannelMitchy13

    @ChannelMitchy13

    10 жыл бұрын

    There are several on KZread but you probably found them by now. Very very hard to get out. Spray Break free on 'em and don't give up.

  • @ChannelMitchy13
    @ChannelMitchy1310 жыл бұрын

    Hey, my machine is 15 years old too, but I can fix it cheap for under $200. Now manufacturers won't make them to last more than 6 years and they cost twice as much as the Maytag Neptune did then. "Planned Obsolescence" is the name of the game folks.

  • @gtrjoe68
    @gtrjoe6811 жыл бұрын

    Get a fisher paykel and you don't have to worry about this for 15 yrs.

Келесі