Warning: Do Not Drop It... And Guess What Happens?!
Тәжірибелік нұсқаулар және стиль
Warning: Do Not Drop It... And Guess What Happens?!#plumber
In this episode we have a strange fault on an overflowing toilet, using Viva sanitary to sort it out!
Then a Worcester bosch no heating no hot water... what do you think its going to be?
I show my methodology to diagnose this fault.
Then finally a revist to an ideal to install an external expansion vessel.
Guest appearance with thanks to Liam the Plumber in 'Your horror stories'
@liamtheplumber
00:00 Introduction
01:07 Not your ordinary overflowing toilet..
04:03 Worcester no heating no hot water!
09:03 External vessel Installation
12:56 Outro
13:26 Liam the plumber
Пікірлер: 66
4000 subscribers tonight?? 😂❤ please like this video it’s much appreciated 🎉
Thanks
@Heatking
5 ай бұрын
No Thank you Keith!
👌
@Heatking
5 ай бұрын
Thank you buddy
Oh wait wait am I hearing you right ! BOTH HANDS he said BOTH HANDS !!! Hallelujah!
@Heatking
5 ай бұрын
Hahah see! Im not actually a magician haha!
My favorite 😂
@Heatking
5 ай бұрын
😂😂cheers Uncle Al
Cheers for the story Liam, top man 👍🏻
@Heatking
5 ай бұрын
You liking This feature in the episodes mate?
Unusual for the flue stat to go Dan I think you can just pull one of the leads off you don't need to bridge it
@Heatking
5 ай бұрын
Didn’t know that about just pulling the leads off. I’ve done quite a few flue stats to be fair. But I do mostly work on Baxi’s and Worcesters. 😂
Well done Dan good to know that a small component can cause chaos. 🎉
@Heatking
5 ай бұрын
Cheers mate. It’s small but expensive £48!
Good one Dan as always You just never know what’s coming next 😂😂 👍👍🤜🤠
@Heatking
5 ай бұрын
Haha cheers Tony! You never know 😂😂😂😂
Great video, the boiler repair is another one you ive put in the memory bank, good story by the Guy at the end, one pipe system nightmare!
@Heatking
5 ай бұрын
Thanks mate. Yeh the stat on the Worcester is a nice repair to be honest. And yeh good story from Liam. 🙏🏽
Liking the breakdowns mate 👌🏾 great video 👊🏾
@Heatking
5 ай бұрын
Cheers buddy. Your bread and butter this 🥰
love the plumbing under that toilet, speed fit heaven 🤣them flue stats i have dropped them inside more than ive got them in nightmare
@Heatking
5 ай бұрын
It’s a nice job though isn’t it when you get one to do 🥰
Good video and good choice to fit external pressure vessel most mi’s state that the pressure vessel is only to take expansion of boiler so should always fit a secondary vessel to take expansion of system
@Heatking
5 ай бұрын
Nice one Tom, didn’t know that! So thank you!
About time !
@Heatking
5 ай бұрын
Haha you been waiting?
@thegrinch295
5 ай бұрын
Notifications bells are for losers !! I was trying to beat the bell
Why did you not change the original expansion vessel, that’s less work ?😊
@Heatking
5 ай бұрын
Less work yeh but not cheaper with materials :)
I discovered that those fill valves allow back siphonage which is a shame because I’ve fitted loads of them.
@Heatking
5 ай бұрын
Does the little double check valve in the connection at the bottom not counteract that now though, I knew they used to have the back siphonage issue but thought they’d rectified it.
Dan, as someone new to gas, the first video, how did you know to check the flue stat? Please advise as I’m keen to learn breakdowns but would be helpful if you’d show how you checked first, and how you “looped out” to test, many thanks bro.
@Heatking
5 ай бұрын
Hey mate. This answer will honestly require another video 😅 it’s quite long winded. I’ll do one in Feb, but basically i was following the sequence of the boiler as it try’s to fire. 🙏🏽
Dan I get them ball valves from tool staion thers only a pound in different between the two so don't be so tight get the brass shank ones I know they are slightly longer but all I do is put some poly washers to take up the difference if the pipe is fixed hope this helps Dan
@Heatking
5 ай бұрын
Good shout mate, well truth be told I ordered 5 fill valves offline, not realising they was the plastic threaded ones 🤦🏽♂️😂😂
@charliewillis8527
5 ай бұрын
@@Heatking I think in tool staion they are about £8 cheaper than the plumbing marchant
@Heatking
5 ай бұрын
@@charliewillis8527 nice one brother 🙏🏽
@charliewillis8527
5 ай бұрын
@@Heatking got to help you young plumbers out lol
@Heatking
5 ай бұрын
@@charliewillis8527 😂😂 send all the help you can 😂😂
Who's put super glue on that ideal flue manifold? 👀 Might try that 😅
@Heatking
5 ай бұрын
😂😂I think it was silicone grease 😂
Great video mate. Just asking a general question was it just because of the cost you added the external vessel instead of changing the one inside the boiler?
@GasTraining
5 ай бұрын
In the video he mentions it just looks like a pain to change it inside lol so he opted to do it externally, are you new to the trade/learning?
@Heatking
5 ай бұрын
Price and the fact it looked a pain to do yeh mate, didn’t want to open a can of worms. However. Had this boiler not been in a cupboard. I’d of tried the hose change 🙏🏽
@naveed5098
5 ай бұрын
@@GasTraining I changed the expansion vessel internally on ideal logic 30 a few days ago it was installed in a bathroom cupboard it was just a general question I asked and no I've been doing boilers a few years now. But you live and learn every day and I like to see how others go about there work and maybe help me in the future
Who put a radiator in that space with the boiler? 😂😂😂
@Heatking
5 ай бұрын
God knows but it was like a bloody sauna 😂😂😂
@colin4685
5 ай бұрын
@@Heatking only reason I can think is to make it a bypass one? 🤔
@Heatking
5 ай бұрын
@@colin4685 I think it’s because it was the old airing cupboard and they use it for drying clothes.
🤘😎🤘🫖☕️🍰
@Heatking
5 ай бұрын
Good evening sir 👍🏼
@SuperWayneyb
5 ай бұрын
@@Heatking Good evening Buddy 🤘😎🤘
@Heatking
5 ай бұрын
@@SuperWayneyb you well my mate?
@SuperWayneyb
5 ай бұрын
@@Heatking All good 👍
Absolutely nothing wrong with oversizing expansions
@Heatking
5 ай бұрын
Cheers Steven 🙏🏽
@Purebeltersteve
5 ай бұрын
@@Heatking its actually far better for your heating system as pressure wont go past 2 bar if you put a 12 in say and you only need 8
@Heatking
5 ай бұрын
@@Purebeltersteve yeh I see the logic in that mate! Thank you 🙏🏽
Thanks
@Heatking
5 ай бұрын
You’re a legend! Thank you so much brother 🙏🏽