👇WeldTube Store👇 www.weldlife.com

That time when you learn more from youtube video than from the paid course in the workshop. Priceless. Thank you very much for your videos.

@cristiandelgadillo347

3 жыл бұрын

I agree

@jonathanquinn6863

2 жыл бұрын

What you learn in a paid course is more then what you learn on KZread you to can’t give you consumables material to practice on equipment you won’t have access to

@jonathanmacneil4359

2 жыл бұрын

Same thing happening to me atm, stressing me out..

@jonathanmacneil4359

2 жыл бұрын

@@jonathanquinn6863 it’s a waste of materials when there is very little if any explanation or instruction..

@gideonarmagost5119

2 ай бұрын

exactly why you wont see me at college😂

The videos just keep getting better and better, appreciate all the Hard Work and the people and whole supporting cast, that come together for one common cause to make it Happen 💯🙏🏾🕺🏾🥳

Well done. That's good that you discussed heat input and also impact testing.

Thank you sir so much for the great content that you give out and the rest of the WeldTube crew, I can’t wait to graduate from welding school next month.

Thanks for taking the time fella , stay lucky, stay safe, 😉🇬🇧

Awesome video by an expert welder. Thanks!!

Those are some beautiful welds.

Maybe the best tig demo video out there

Thanks for the knowledge much appreciated love all your videos

If this is was a class I’d listen because it actually interests me and he shows a lot with detail

Good instructional videos! Just got my chopped hood in the mail and Damn I Love It!! Keep up the good work and Thanks for the Instruction!

Nice Job, enjoyed the video, very informative, like watching your technique, thanks.

Good stuff Abraham!!!

Wow, you have really great skills, bro. Greetings from Germany. Walking the cup is not that easy how it looks like for you :D. Keep burnin' 👍🏻👍🏻👍🏻

Sup Abraham Happy New year :) great explaination of what was going on. Nice job weldtube team :)

Thanks for the tutorial good job.

This was a very useful covering an essential topic with very simple clear video. As a complete novice i thought the rule was always 1 Amp/thou. Thank you. Is their a simple guide available for Amps settings for different weld material thicknesses and configurations. ir fillet/pipe/flat plate etc etc etc

The amperage and filler rod diameter has to factored in when setting the weld machine. 3/32 to 5/32 rod runs very different numbers. It's all about personal preference and experience.

I appreciate your teachings Bruh

Damn, good looking welds

I like that pattern brother thumbs up

Can you tell me what brand torch and list your equipment used in this video ? Thank you enjoying all the great information

U really good in teaching thanks for your tips it means a lot to Me

thanx for the info =) great refresher info =) been a while since I tiged anything =)

Thank's tips walking welding tig, see you new tips and trick, good jobs im from indonesian

This is awesome. So informative. Thanks for your time.

Thanks for the tips. Bout too go to class n try m out.

Great Video! thanks.

Good video 📹 bro💪✔

Good video 💓 Form Thailand 💓

There really is a natural tendency for a beginner to run cold thinking by going slow you can create wider beads and the idea that maybe if you run hot you’ll need to walk it faster therefore tighter beads. This is especially more true for stainless pipe with the sugaring and all.

Thanks for the video, great work. I have taught a bunch of people to weld over the years and I have been a big fan of pushing people to run to hot and too cold as part of the learning process. It’s hard to know what’s too hot when you have never ran too hot. This video definitely ended better than most could with 300amps lol. Mad props for handling 300👍🏻.

Great info. Thanks! Did you let the plate cool between passes?

@NRC073

4 жыл бұрын

Ding ding ding.... Wondering the same thing. Would make a massive difference

What's up weld tube. Keep up the good content. I'm learning from you guys send me some merch to represent you guys out here in Az

Good video Go Go. I am a Korean welder.

Hola aprendo muchísimo de sus videos, Pero quiero quiero saber que calorías contienen las camisas negras que usan en los videos .????????

Thank you Very useful

HogOn Great Tips Brother!

I think it gets slippy because the metal is cooked, when the metal gets cooked it's mechanical properties are lost and the steel begins to break down and it starts to turn gray, when it's gray it's super slippy and is basically a lost cause. Crappy gas coverage will also cause the metal to go gray which will lead to a slippy pipe/plate and make it really hard to roll/walk the cup on consistently, without slipping off and stabbing your hand with a nice red hot tungsten xD

congrat man very instuctif thanks

Thumb up ..good tutorial

I’m learning to walk the cup after free handing for many years. Is there a reason the center of your “walked” welds are not lined up with the actual weld groove? Wouldn’t this cause one of the two PCs of metal that are being welded together to heat up way more than the other, and cause puddle control and penetration problems?

Very helpfull video thx

The ostrich hide face shield is slamm'n

If you've been able to weld in this sweat locker called South East Texas... I'm impressed! Everything's wet and that includes the argon!

@Ruben901

4 жыл бұрын

Even the weld rods are wet

What up weldtube! I just want to stop by and say I really dig your videos. Quick question. On a Stainless 2” Schedule 40. Would you say 75 amps is to cold for the root pass on a 1/8 gap? Or what gap and amps would you recommend.

@kf8575

4 жыл бұрын

80-85 amps, 1/8 gap, 1/16 rod, 10lpm purge flow and a nice fast travel speed.... that works great👍

@victorlopez378

4 жыл бұрын

@@kf8575 thank you! i really appreciate it.

El tugsteno es de 2.4 de diametro?. Varia el flujo de gas de proteccion como lo regulas?

thanks for showing me

Good video hey could you upload a video of how to convert a linconl classic 300 d to tig and the temperatures please

Another great video. You said the hotter the pipe, more chances to slip the cup while walking. Do you wait for the pipe to cool down before capping? Thanks.

@Ruben901

4 жыл бұрын

Also, another insight to the "slipping of the cup" from what i have seen is that the ceramic cup gets hot and turns black on the nozzle side where you are walking the cup, that side gets slick and makes you slip the cup

@georgiojansen7758

4 жыл бұрын

15 minutes, start with a second weld if available or else you can't make your 40inch a day

Under cut is when you blow a hole through the base metal?

what amp of heavy hitter torch do you use, is it the long flex or normal

I wonder if you let the plate cool down each time

Did you cool it between each pass?

Is the penetration acceptable at 80 amps or is there ideal penetration at higher amps. Great demonstration. Thanks alot.

@gwot

Жыл бұрын

you can get the same penetration at 80, just gotta go slower

What size cup do you run and where's your hat from?

Depending on where you're working and how strict they are. Be mindful of staying within the amp range specified in the WPS.

@InchFab

2 жыл бұрын

Yeah, regardless of what you like, this is kinda important.

I do like your vids though for sure.

Pipe mig welding in torch other moving position videos please

Lets get a Hub Cap tutorial! He loooooves the big amp!!! Would love to see his technique!!

I wish you would have talked about heat in relation to filler wire? What a ball park for heat on carbon... with a 3/32 rod? Ball park on carbon 1/8? And ball park on 5/32 filler? Also are you using 1/8 tungsten? And what size rod and gap do you choose for various size pipe? Or is it always using 1/8 er70s-2 ? Now with that said can you do all that again for stainless? Roughly 2/3 the heat correct?

@davidsolomon915

4 жыл бұрын

And what size cups? Do you always use #10? Or #6 for root? And work your way up to #12 for cap???

@davidsolomon915

4 жыл бұрын

@@nate_the_welder yes very true... but for root on carbon with both bevel edges no land... 1/8 back feeding cane be done at 100-110. So yes it is close.... but what you recommend for stainless? And do cup sizes and tungsten stick out change from root to cap?

@davidsolomon915

4 жыл бұрын

@@nate_the_welder great info.... more like this i need. What about tacks for back purdge? 12.3.6 and 9? Do you start right 6 and quarter pipe? And peel tape as you go? Or go right from 6 to 12?

@davidsolomon915

4 жыл бұрын

@@nate_the_welder hey nate... yes 1/8 is .125 But i was told that for base metal... im refering to filler rod size? Now with pipe its feathered edge... so assume your saysing for rod side?

@davidsolomon915

4 жыл бұрын

@redxpen yes absolutely.... agree. Gap and fit up will determine heat... I am in a structural shop.... so no tig at all .... all this is on my own paying for my own stuff. So im just trying be specifics due to if i only need to buy a tube of 1/8 filler. Or is it best to have 3/32 and 5/32 aswell... tha ks again guys

Awesome 👍🏻👍🏻👌🏻 Hey i always have problems caping at 2G it sags an i get under cut at the top bead . Can u make a video on 2G tig cap on a CS 6" SCH 40 please

@chrisjones6165

4 жыл бұрын

Change torch angle, turn down amps, add more fill, could even be to cold and to moving to slow causing it to sag and gouge the top. Hard to say for sure without seeing it in person or how your doing it so I could point out issue/issues your having. Keep at it and it'll click

@kf8575

4 жыл бұрын

I always split a cap, and let it cool right down so can touch it between the two passes when welding 2G.

@victordavidup

4 жыл бұрын

that’s completely normal if it happens to you... We all have been there. Just do 2 bead caps, the second one on top will cover if you had undercut at the first one

Someone should do this with stainless lol like schedule 10

@devious762

4 жыл бұрын

Pretty much sanitary for you lol

I have a 17fv torch and the box says the amp rating is 150. How long can you typically weld at the max rating before destroying the torch and can you go over the max rating?

@mhudson631

4 жыл бұрын

Matthew Williams depending on the torch they have different duty cycles. A weld craft is 60% I believe so 6 out of 10 minutes. A ck torch is rated at 100% so non stop. “Technical Data” also that’s at 150A if you go over the duty cycle goes down so just can’t weld as long

@matthewwilliams6596

4 жыл бұрын

@@mhudson631 mine is from profax

I'm going to look for you on KZread. I don't have Instagram. Now that I've been through tig school I prefer to tig instead of spatter ass stick or bs mig.

Are them shirts fr and are they on the outlaw web page??

what was your gasflow?

WALK IT LIKE I TALK IT. GET SOME 👊🏻

@TheFirstAmendment

4 жыл бұрын

acbach lol so lame 😂😉

@abreitenbach

4 жыл бұрын

God is my fortress Acts2:38 i may be lame but my weld game aint 😎 😆

Also did you let plate cool before next passes? And what is tungsten stick out?

COOL

Buen video oye podrías subir un video de cómo convertir una linconl classic 300 d a tig y las temperaturas porfabor

What machine was that?

0:11 Yeah man! 😅

My job won't let me make wide weave passes like that for tig..😔

Where are y’all located at

a vid like this with stick would be clutch

@beachboardfan9544

4 жыл бұрын

Dont think you can walk the cup with stick...

@simplyytez6626

3 жыл бұрын

@@beachboardfan9544 I think he means like running the stick at different amps

what is under cutting?

How to feed the filler rod

I wanna see ur arm movement while walking the cup please!

@jeepwk6.5L

3 жыл бұрын

Chicken wangggg

That's what I'm talking bout

hb was blasted lmao thats wassup😏😵‍💫

Make a video 1/16 gap on stainless

sweet

Can you vedio on how to make bevel perfectly?

In what city or town are yall located in?

@Ruben901

4 жыл бұрын

They are in Houston Texas

Como regulas cuanto flujo usar dependiendo los amperios que utilices

@josegante6982

2 жыл бұрын

Eso no se regula segun el amperaje.. se regula segun el tamaño de la copa... Normalmente se multiplica por 2 el tamaño de la copa.. si usas una copa #5 con 10 cfh basta... Si usas una 7 con 15cfh funcionara bien.. a mayor la copa.. asi mismo mas flujo de argon.. no tiene nada que ver con el amperaje..

Buen dia saludos desde mva. coah. mex. Exelentes videos. Alla en estados unidos tambien trabaja un primo k trae un grupo de soldadores pipe line se llama gerardo cortez no se si lo conoscan saludos

Filler 5/32?

What is the best apers and gas for 2mm or 3mm fat pipes

@gwot

Жыл бұрын

no such thing as best. As demonstrated in this video, you can get the same results with a wide range of amps

What happened to the other guy his name starts with an A I think?

260 already had a weird crack in it

Hello sir how are you

How to get color when welded

@josegante6982

2 жыл бұрын

Gas covering... Thats the "secret"

Toop ✌👊

Am a Lerner and I need video for beginner

I dig the US flag !

my puddle better want to listen to me, shit...

Good vid but you also have to be more informative on gas pressure and how to set machine to self arc rather than using foot peddle. All this plays a factor to those who do not know how to read a gas regulator and pressure that is stated on a WPS. GOOD vid tho..

Common sense is rare these days 🤣