I'm new to the hobby, just joined an escalation league actually. This insight is super valuable for newbies like me that can't justify the high price of entry to the gaming aspect of the hobby. Thank you!

@Biersteak

2 жыл бұрын

Also consider, that older models - while looking less dynamic - also often function better as a game piece. They don't brake as easy, are faster to paint and could be easier to spot on the table.

@DJRockford83

2 жыл бұрын

With resin 3d printers being £140 (sub $200) and a single plastic kit from GW being £35 coupled with water washable non toxic resins now being available this makes it a good bet for the long run if you're a more casual gamer or a painter

I've got a 3d base designed for the old Be'lakor ready to print. It's a raised base that lifts him to the size of the new model and has him standing above carved demon princes of the 4 chaos gods.

@eBayMiniatureRescues

2 жыл бұрын

That sounds perfect!!

@dlh567

2 жыл бұрын

Thanks! I got really lucky and got a new, still in box metal Be'lakor for €35 on a local site here in France. Looking forward to printing and painting this, almost done with my Orks so I can start working on my demons again! Thank you for the inspiration! Buying old models and modeling large bases for them is a ton of fun and you're a huge inspiration there!

@lordofswarm538

2 жыл бұрын

I'm actually about to be doing a very similar thing to my old school metal Avatar of khaine using a broken webway gate/other structure from the dawn of war games. Now whether I will be making said webway gate or buying it off of ebay will most certainly depend on pricing for the eBay auctions.

@Chasebrah

Жыл бұрын

Can you post the .stl?

I've only painted a few miniatures in my life, hardly a painter of miniatures by hobby.. Yet, I can't get enough of your videos.. You have such a talent brother

I would give a third point to: why are you saving old models, Historical preservation. Seeing where the hobby and the game was.

@eBayMiniatureRescues

2 жыл бұрын

I like this third point :)

@abbattoir13

2 жыл бұрын

I like collecting and painting old models. Getting my hands on the models I didn't have as a kid or stripping the ones I did and repainting them. It's nice to do them justice years later.

@sethrinker9944

2 жыл бұрын

It's a genuine bummer how much gaming history and hobby ephemera has just been lost over the years.

I haven't been around here for a long time, a year perhaps. The videos, the models, the sound quality have all improved way lots! I really appreciate being able to hear every word so clearly. Thanks and well done!

@eBayMiniatureRescues

2 жыл бұрын

I really appreciate that, thanks! Trying to improve with each video :)

Brings tears to my eyes seeing the old Belakor model because I remember he is in my storage unit. Wonder how much my old Nagash goes for

I love Casey's "Lumberjack at the Beach" aesthetic. Thanks for another fun and informative video. The relaxed nature of these videos is always welcome.

For me, three big reasons to save old models is (a) to see how far you've gone, (b) because they're a piece of history, and (c) you never know when you'll use them. It doesn't even have to be in the original game! I've got a whole bunch of early 1990s pewter Brettonian models, and the unpainted/marginally painted ones have found a wonderful home with my Frostgrave mercenaries. Meanwhile, my metal Hellhound made a nice display piece to go alongside my Krieg killteam. Though in retrospect, I *deeply* regret removing the paint from my old sorceress - lost some history there. But the minimally painted stuff? Fair game!

Anyone who complains that your old model isn't 1) The right size, 2) standard, 3) or not within the "spirit" of the format....those people are not people to play with. Long as we get to push plastic, roll dice and have a good time, then lets play! BTW: Please keep putting your models on really tall bases to fall prey to my ranged troops. #Thanks

@eBayMiniatureRescues

2 жыл бұрын

Here here! And I feel like I’ve learned my lesson on models that are too tall lol.

@sirvivor7835

2 жыл бұрын

@@eBayMiniatureRescues Shalom, Tubby. I lost interest at around the 10-min mark on this video. There's only some many times you can here someone say the same thing before this happens, in general. You're going to paint the base with light source affect, we get it.

@CherudexGaming

2 жыл бұрын

i've got an old Bloodthirster, that is half the size... i've taken the right base, and i put a small building (from city of death) at least to match the height

@xBeauGaming

2 жыл бұрын

@@sirvivor7835 wow sir douche, sure glad you took the time to be irritated with all that free entertainment. Iteration is the mother of understanding, iteration is the mother of understanding, iteration is the mother of understanding...

@eBayMiniatureRescues

2 жыл бұрын

Lol, what a weird way to respond. Shalom to you as well little boy!

The new Belakor is incredible, no argument, but I think the old one still holds up and only wish it wasn't in Finecast.

@trzynasty909

2 жыл бұрын

I'm pretty sure that this exact model was cast in metal as well. Finecast was the only issue with it, because he honestly still is the best looking demon prince (because new Be'lakor is just so much larger than everyone else)

Personal preference: would've done less white on the face. It's flat ghostly. Would've liked some yellow in the base glow for fresh hellfire look. Could've been echoed in the sword instead of green for compositional balance. Would've liked some spiky up bits added to the base, as if he fell like a meteor from the sky and cratered the ground so hard it created a dimensional rift.

im just getting back into 40k after i lost all my stuff in a flood 10 years ago. dude your channel is my new favorite i cant get away from it i absolutely love your work and your personality. thank you for your content

Far and away my favorite painting channel. Supremely underrated. Thanks so much Casey.

I think it would have looked a lot nicer if the base had more going on, like the new belekor, a throne/stairway would have given him a much needed hight boost

@grenndal

2 жыл бұрын

I agree. That base needed something more to bring him up. It is massive base and you could have done something to make it more interesting or as you said tell a good story. This just says he is standing on a flat surface

@ribbon_dye

2 жыл бұрын

Gonna agree as well. Despite saying you could raise older models up or do something interesting with the base.. Nothing was really done. Base was left fairly empty, only with the small details that were already on it, and left flat as well. More coulda been done to actually tell a story or have -something- done with it to be more visually interesting in that large empty space.

I have both the original metal and the new plastic Belakor. The new one is about 4 times the size of the old one honestly. It's also my favourite model in all of Warhammer so it didn't feel bad paying the price. I still regularly use the old model though. But to represent a generic Daemon Prince not as himself.

@tycondrius23

2 жыл бұрын

I was just going to say something similar , I still have a bunch of those first version greater daemons and they look dwarfed next to the current mini but still good as a daemon prince

@GalianMode

2 жыл бұрын

That's a great idea.

@herculeholmes504

2 жыл бұрын

There is a problem with these new giant-size miniatures: They are fragile as hell, and I think they are deliberately designed to be fragile. I've got an Archaon Everchosen still in progress; it's fully assembled but I broke a chain and a crow while building it (I am quite careful handling models) and the way it's supposed to secure ot the base is a joke; no amount of polystyrene cement is ever going to make it secure, so I ditched the plastic base for a wooden coaster base, added some scenery and pinned the tail into the scenery and heavily glued the scenery so that nothing would break off under the weight of the model. I added a rock-wall piece at the back to act as a handle. I reckon the Archaon Everchosen model normally has a lifespan of about two games before it gets badly broken to the point where it would have a badly reduced resale value. Also, if you ever build on of those things, be ready to run the wing parts under hot/boiling water to bend them into correct position, they do not go together easily. I wish I had; even after much sanding and filling there is a visible gap. I would also run a piece of brass rod all the way through the tail & body (and fill with milliput) BEFORE assembly as reinforcement. Something I noticed about old school metal miniatures is that they make much better figures as playing pieces; I'm not sure if that's by design or coincidental, but they are compact and rank up nice and square like chess pieces.

@trembichmovingmoments8778

2 жыл бұрын

@@herculeholmes504 I don't know the Archeon model very well (40k player only). But let me tell you this: glueing the old Metal Belakor together took me 35 tries with diffent superglues and green stuff. I permanently lost a piece of his tail. His feet don't place on the base well. His sowrd hand still falls off sometimes. The plastic one fits like a glove, is very secure on his base and his big wings I magnetized (easy with plastic models) for transport, but they would have fit perfectly as well.

@herculeholmes504

2 жыл бұрын

@@trembichmovingmoments8778 I think I might have a metal Belakor model, If I find it I'm going to take up that challenge! I've got a fair amount of sculpting ability so misaligned parts aren't too troublesome for me, and it's just the business of pinning and gluing I have to put effort into.

I kinda prefer the look of the older Be'lakor, because like so many AoS miniatures the new one is a bit too busy with details for my taste. The OG Be'lakor still has plenty of use as a Daemon Prince or some other unique demon. :)

@jacobleonard5138

2 жыл бұрын

My friend has a beautiful metal Be'Lakor on a square base drybrushed gray probably one of my favorite models of our play group

@Mara999

2 жыл бұрын

If I can get myself an affordable Be'lakor, I might paint him with red scales to turn him into a D&D Pit Fiend.

You're a braver man than me putting finecast in the ultrasonic. I always blast them with methylated spirits/denatured alcohol through the airbrush.

@eBayMiniatureRescues

2 жыл бұрын

I know what you mean, but if finecast is getting a bit bendy, the heat is great for setting parts back to normal :)

@herculeholmes504

2 жыл бұрын

That's a new one on me, I've never tried that before. Nice idea.

@chikhai

2 жыл бұрын

@@eBayMiniatureRescues Yeah, the heat can help like that, but don't sit them in there too long. I don't know if you've experienced this yet with finecast, but if the model is already warm when you expose it to the ultrasonic it has the effect of shot-blasting it. It'll pit the miniature (like finecast needs any help in that department) and tear open any weaknesses in the resin. I found out the hard/expensive way with some old hive guards. I haven't had to resort to that method for a while now, but when I did I used 5 minute bursts, letting the model cool off in some cold water for a couple of minutes before the next round.

@chikhai

2 жыл бұрын

@@herculeholmes504 Yup. It can be a little messy, but it works. Crank the pressure up and its as good as using a toothbrush once the meths has broken the paint down a little.

Nice! I got an old SUPER broken Abadon in bitz lot. He's missing his head, arms and worst of all it looks like his left leg was deliberately sawed off at some point in his life. So, I'm in the process of using the battered remnants to make a kitbash Ork Warboss in Mega armor.

Thanks for the inspiration. I am assembling my new Belakor model and looking around for inspiration how to paint it.

Love every aspect of the idea of salvaging and treasuring older models, in addition to saving money and making the more sustainably driven choice, it's a wonderful way of treasuring some of the old charm of the game and they just have a different feel to them. Awesome work on the model and the channel itself! Love every bit of it!

@eBayMiniatureRescues

2 жыл бұрын

Much appreciated, thank you :)

Printing a base is a brave move, luckily it seems to have worked for you there.

Always enjoyable - missed you last week. Always get a kick from the ebay rescue side of things. Painting ... like that too. Keep doing what you're doing bro.!

i like the looks of the old warhammer models i grew up with (4.-5. Edition WHF)

Love seeing you work on old Be'lakor. I felt the urge myself to paint him up before I painted the new one... basically the old sculpt was neccisary to have painted to fill my daemon prince collection as now I have one for all the 4 gods plus old and new Belly-boy.

Nice I have the balakor model too , mine seems ok , I need to get to him soon !

I want to go specifically buy some old metal models. I got one once and I *love* the weight, I generally like heavier things. I always loved the old shoulder braced heavy bolters so I’ll be on the search for that and others

For those without a 3d printer, contact the nearest university or tech school. At least in Europe they usually have a 3d printing shop you can directly use or pay a student a coffee to have them use it for you.

@eBayMiniatureRescues

2 жыл бұрын

There ya go!

I love it. The head is a bit too white for my tastes but that is the only thing I have to criticize. I have owned the pewter version of this model since about 2005 (still unpainted) and use him as a Daemon Prince of Chaos Undivided with wings for my Black Legion. I also use the old pewter Great Unclean One as a Daemon Prince of Nurgle. The "normal" old pewter Daemon Prince I use as a Daemon Prince of Khorne. The Nurgle one is almost done painting and I think it is my best paintjob to date. I plan to top it with new plastic Abaddon though. One thing I found is that is is very hard to find good painting tutorials for the old pewter models. Sometimes they even barely show up on Google Image Search. So thank you for posting this. I might have to start painting old Belly K soon now. 😀

not a warhammer player, but I like watching painters talk about their pieces. Love watching you take something from EBAY and turn it into something astounding. I just wish when you did your pieces to camera, you positioned the round light in shot over your head, would make you look like a saint :D

Tape a second FEP under your vat for your new Saturn. If there’s ever any hole or spillage that happens when the FEP in the vat breaks, it will go on your protective second one and not ruin your screen. Also I got a flex plate on mine. Took a bit of work but it’s great for batch printing a bunch of flat bases.

@eBayMiniatureRescues

2 жыл бұрын

That's a good idea. I've never had any leaks, but I'm sure it's only a matter of time before one of these printers breaks on me. I also really want to get one of those flex plates, they look super handy!

Recently, I've gone back to work on a few early FineCast that I'd gotten when it first came out. It makes me think that a lot of the issues was due to the resin chosen not curing that well for shipping and taking years to fully cure there. The two are both Vampire Counts with Isabella and Krell...which were ones I didn't have (I do still have an older Kemmler), still working on Isabella because I'm not entirely sure what I want to do there...Krell ended up rather nice there

Very cool! I have recently considered getting one of the old 40k Assassins off ebay. And yes, that sneak peak on the watch got me excited ;)

that sword is ludicrous (in a good way), warhammer af haha

Going to be doing this with an old metal Shadowsun soon, get her a nice dynamic base.

That stark zenethal looks great! Well done!

Tbh, I got an old Gaunt's Ghosts kit in storage new in box.... not gonna play guard but it's sitting there being the original metal kit... not sure if I'll sell it yet though.

Public Libraries should have 3D printers avail to print for the public. I use my library's printer frequently.

@eBayMiniatureRescues

10 ай бұрын

I've heard of this before, and I think it's great! My library system does not, as far as I know, have anything close to 3D printers available. I do know that a few of my local hobby shops do have them available. Either way, good call on checking your local library!

I just bought the original Ghazgull to do something similar with, I love having the same character and how they have evolved next to each other.

@eBayMiniatureRescues

Жыл бұрын

That model is so good too, I use that one in my ork army instead of the new one.

Yikes, he looked rough when you got him... Nice job restoring him!

Hey Casey - great video man. I've always loved that old Belakor model, it has so much of the old school classic GW feel!

That actually turned out super sick!

that's tiny Belakor, I love him, he is now that I have big Belakor my tiny deamon prince proxy, my finecast Belakor was horrible, but it is so much better than the one you got there, damn thats like a prime example of bad finecast

Rogue trader models are the ones worth $$$$ now. I have a few chaos squats that fall into this category

You can always substitute models as well you may not like to look of a newer model and the older model may lead to more creativity as well

@eBayMiniatureRescues

2 жыл бұрын

Proxies are great if everyone playing is down! Creature Caster makes an awesome Be’lakor proxy.

@eBayMiniatureRescues

2 жыл бұрын

@@kscott2655 well yeah, if you are playing in a tournament that doesn’t allow proxies then you gotta do what you gotta do. Not everyone plays competitively, probably most people in the hobby I would imagine.

@eBayMiniatureRescues

2 жыл бұрын

@@kscott2655 dude you need to calm down, it’s not like I’m being offensive or something. If you don’t like my advice then fine but don’t come here with some elitist attitude thinking you can shame people who don’t play in tournaments. I’ve said on many many occasions that there are things that are acceptable in tournaments, and things that aren’t. And EVEN THEN, it’s up to a TO to determine what they want in their games, so please do everyone a favor and stop.

Hey bud you'll have a lot easier time and better looking bases if you don't print them flat like that. That way is the fastest but you can break a base(especially that size) getting it off that bed. Also you're dealing with a ton of suction because of the surface area I'm surprised it stayed on! Awesome vid though!

Tip: if you like old models but have issues with getting them: play Middle Earth Strategy Battle Game! It's basically large scale Infinity (or large scale Kill Team) but with the Lord of the Rings!

working on a whole army of retro direwolves! I think it's fun to have models from the whole long history of the game

Your channel is fantastic. I also love nothing more than finding use for Oldhammer stuff. In AoS or frankly one of the miniatures agnostic range.

I really want do a "painbow" Belakor now... Purple, Green, Red, Blue, Black. One for each of the chaos gods. Backlog tho...

Wow that looks stunning. Plus, I saw what was on that watch 😉

That is a pretty dope sword from the daemon prince kit.

As far as playing the old models, everyone's play group is going to be slightly different. In competitive 40k the general rule of thumb for this is that your model should still resemble the new one as well as cast a similar silhouette. If its questionable if your model can be seen or see, your opponent generally gets to make the call. This is not so much specifically rules regarding new versions of models, but rather a rule meant to prevent modeling for advantage (which is a whole different issue) new vs old versions of models just happen to get caught in the crossfire. If you are ever unsure, ask your TO. If its a casual game, just let your opponent know before hand and if theyre upset you dodged a bullet anyways....

better refurbed on a table than in a landfill I say!

I always love the music in your videos

I've got that Be'Lakor, but in metal. Plan on getting the new one and seeing which one weighs more!

@eBayMiniatureRescues

2 жыл бұрын

Hahah, I’m betting the metal one still weighs more!

I use the older models of Orcs & Orks as Feral Ork Freebooterz. Been doing that since Rogue Trader days.

I LOVE this! Only question I have is, what are the black sheets you use? It's been bugging me for a while 🤣🤣

@eBayMiniatureRescues

2 жыл бұрын

The black sheets are construction paper :)

I have alot of the old models in my army front scouts to command and characters

Looking great, man! Looks very nearly like an albino demon prince or something. But did you pin that sword blade before gluing it?

Bad boi Orphan belakor, you adopted him and threw him back into the Ebay orphanage! Fun process enjoyed it!

I hate finecast so much. I also like that we have similar ideas on fixing broken ones. Broke the staff on my Nemesor Zandrekh and basically made him a new one with plastic bits

i am (w)orking on kitbashing some Kommandos from old orks. reposing old mono-ish pose Nobs is kinda fun

I use Belokor as a Deamon prince which I did before they changed the model.

I found these old minis at a lgs in Kingston On. They kind of looked like generic sci fi power armour troopers but had football helmets. They were made out of either pewter or white metal, would anyone know what those are from?

@eBayMiniatureRescues

2 жыл бұрын

My guess would be old blood bowl minis. Some of those can be worth some money, and obviously still good today if you have all the stuff for them. Even then, if you have rules and the right number of models they can be whatever team fits best and you could play that game, win win :)

@thejonathan130

2 жыл бұрын

@@eBayMiniatureRescues All I know is that they're not GW. But they were kind of funky looking and was always curious to know where they come from

3:40 Hi Casey, I assume you already know this, but higher temperatures can be a bit risky when it comes to stripping resin mini's. Did the finecast feel bendy when you got it out of the tank?

17:00 the downside of keeping such a large distance between your airbrush and the model is that the paint tend to speckle. Because of that I think the red glow on the skull looks more like blood splatter instead of glow.

I love your Videos and also want to strip some old models of mine and for this I want to know which kind of Liquid do you use in your Ultrasonic Cleaner because I dont know if you use something special

Rescuing old models is really nice idea, what kind of liquid do you use in the ultrasonic cleaner to strip the paint?

I like the almost Albino feel with the pale skin. It is something different.

I have a few old chaos metal models, I reached out to you on Twitter about it.

@eBayMiniatureRescues

2 жыл бұрын

Oh I haven’t been on twitter for what seems like forever, I’ll check!!

I've looked at dozens of sources with no luck, do you know of any decent chaos blade bits? Not quite 'blade-slaves fleshy' but more chaos-ish than the CSM or Raptor kits

Hello, what did you use to strip the original paint? Every time I try to find something that would work and is available near me I seem to hit a brick wall.

Hello mate, do you know any means of stripping oil paint from minis? Got some old goblins ruined that way. I tried IPA99 and had some luck, but the old paint still stay in recesses.

Did you put a pin in to hold that sword? If not, that is going to break off the first time someone holds it.

I think this is one of the best paint jobs you've shown. Some serious skill and an amazing result.

What fluid do you use in your sonic cleaner to strip paint?

@eBayMiniatureRescues

2 жыл бұрын

LAs totally awesome. Any kind of concentrated degreaser works really well usually

The nice thing about getting second-hand models is that you also don't give any money to GW in the process, which is a big bonus given their recent history.

I have an old resin great knarloc model from forgeworld with a pretty horrendous paint job. What chemical did you use to strip it? I've struggled to find a solid answer

@eBayMiniatureRescues

Жыл бұрын

I use a concentrated degreaser called LA's Totally Awesome, but anything similar should work and not hurt the resin. I also use a sonic jewelry cleaner to speed up the process. It's not necessary to have one, but it really does make it easier!

How do you manage to clean finecast without hurting the resin?

Damn nice, as always.

which chemicals do you use in your sonic cleaner? I've got a load of old resin and finecast that i need to strip, but i'm scared of melting them

@eBayMiniatureRescues

2 жыл бұрын

I use LAs totally Awesome which is a concentrated degreaser. It works great and I’ve never had any issues with plastic or resin. If you use a sonic cleaner then the only issue you can run into it how hot the sonic cleaner makes the liquid. I ended up getting one with a temp gauge so I could monitor that. It mostly applies to resin models, they can get real bendy, on the other hand, you can also fox bendy resin models that way.

@Coproquim

2 жыл бұрын

@@eBayMiniatureRescues cheers, now to figure out how to get a few litres shipped to the UK lol

@eBayMiniatureRescues

2 жыл бұрын

@@Coproquim I’ve seen it on Amazon, a little more expensive to ship though. There might be an equivalent type of cleaner over there, I’ve heard tell of such products. The main perk of totally awesome is that we can get it in the US for $1/bottle.

What glue did you use for the sword .. super glue or plastic cement?

@eBayMiniatureRescues

2 жыл бұрын

Super glue, it bonds to resin very well.

All I have to say, is my paper work for buying Be’Lakor in 2017. I paid $37 for a new one. I kinda feel $40 for a broken one is kinda a bad deal.

40 box ?! Coughing heavily...

@eBayMiniatureRescues

2 жыл бұрын

Yeaaah, $40 is still $40, but still cheaper than the other auctions for the same model and definitely less than the new model.

Would love to know what your dark metal colour was!

@eBayMiniatureRescues

2 жыл бұрын

Vallejo metal color steel, they also make some other dark silvers that are pretty amazing, and darker.

@Nukacola38

2 жыл бұрын

@@eBayMiniatureRescues Thanks legend!

FuK.....I need a sonic cleaner! 😂

Base size only becomes an issue in tournament play. If its casual pickup game at a local store or in your friends kitchen then last I checked unless they changed it, models are to be based on thr base they're supplied with. Now if that base size happens to.be smaller tham current but it was the size the model you have was supplied with on issue, then leaving it on the same size is fine. Only tournaments would make a.stink because of measuring distances. If.you rolled up and dropped some old space marines terminators for.chaos and this guy, I wouldn't say a thing. The distances hurt and help you and me so there's no real advantage gained or.lost.

Another thing about Old GW... Customization and modification was part of the HHHobby.

Thanks for a good vid.

Painting the base edge black before the model is finished is sacrilege

@eBayMiniatureRescues

2 жыл бұрын

Hahah I know ;)

Dont suppse you have Nagash's fingers from his left hand in that bag? I've got a FB Market place rescue I'm painting up now and he has no didgits on his left hand!

I have 2 WHFB Demon princes thats been staring at me for 5 years + and an airbrush Im scared to use forore than priming. Ive been too afrid of wrecking them to paint. I've decided Im going to totally rip off your paint sceme with the airbrush. And not care if it sucks. Hell I can always post them to you 'rescue' 🤣

@eBayMiniatureRescues

2 жыл бұрын

Hahah, naw man you’ll be great! Just take your time and make sure the paint is thin and you’ll have a good time with the airbrush.

@MrBizteck

2 жыл бұрын

Bookmarks 4 me 11:20 prime blk 11:30 red in cracks 11:55 White ctr the the red to light it up! 12:15 dry brush 12:40 Red from below . Mistake ? 12:55 Dk purple for shadows 13:00 lgt purple from side 13:05 lgt grey from above 14:05 white to face ..ctr 14:50 brush edge hi light 15:20 Red glase to wings 16:00 mask off and white pwr sword effect Blue contrast to finish 17:00 Thin red oll

@MrBizteck

2 жыл бұрын

I DID IT !!!! And fucking LOVE IT .... it looks different ended up using a wash as I fucked up the shadowing a bit but its done and Im fucking delighted!!!

How does line of sight work in 9th? Because smaller older models have an advantage because they can hide more easily.

I'm digging out my old Warhammer Fantasy Battles models for Mordhiem... Your information here is required watching. GW missed the mark in the way they continue to try to push all the new stuff, while just putting older stuff on Ignore. Price, itself is in Insanity mode. With the way that Potato's economy is tanking, someone forgot to tell GW that people don't have the money to continue to keep up with the joneses. 3nd and 3d hand is where it's at.

Not relate to warhammer but I bought old broken dirty white Furbie for 5$ , repaired it , clean up. New he look bland new again. He wake up on his own sometime during 3am

40 bucks for a broken finecast belakor? That's more than the original price of the model oO

@eBayMiniatureRescues

Жыл бұрын

Yeah they don’t come cheap anymore since they don’t make them, and the new one is like $120, so what can you do…other than not buying it at all lol.

@leichtmeister

Жыл бұрын

@@eBayMiniatureRescues Not letting them rip me off. That price for a damaged out of production model is just audacius.

Oh my God, you got _another_ 3d printer?! "You might know someone that has one" Casey has 97 now!

@eBayMiniatureRescues

2 жыл бұрын

Lol, I have a few these days.

Honestly went back to look at it again, and the more i watch the more mad i get.. good idea the base looks so stupid though with that model

You sir are a beast

I wish I could get into this more but it's way to expensive for no reason