Volvo V70XC 2002 front left door lock actuator

Ойын-сауық

Replacement of door lock actuator on 2002 V70XC. Same would apply to P2 S60, V70, and XC90

Пікірлер: 21

  • @plavins1
    @plavins16 ай бұрын

    Thankyou! My 2001 v70xc has exactly the same issue. Me being me i will ofcourse try to take mine apart and do an autopsy, see whats up

  • @ryanloos5483
    @ryanloos54834 жыл бұрын

    Helpful video. Started having a problem with my drivers side door not opening from the outside this week. video was helpful for learning how to change my door lock / latch assembly. Also, got that steering wheel just yesterday. Don't have your contact info anymore.

  • @1952fenlon
    @1952fenlon Жыл бұрын

    Very helpful. I'm doing the passenger side front on my 2005 XC90 V8.

  • @boelensds
    @boelensds2 жыл бұрын

    Use a 8mm drill to remove head from rivet.

  • @charlypr88
    @charlypr885 жыл бұрын

    I would use a flat head bolt and a nut to replace the rivet on the window guide ... Might save time and would be easier instead of use a drill..

  • @danielemancin3634
    @danielemancin36342 жыл бұрын

    Hi there! I've a similar problem on my 2002 V70: when I lock or unlock the car, the front passenger knob won't move. In case of locking, you have to wait for one minute or two to have the door actually locked. But the knob is always up. In your opinion, do I need a new door lock actuator too?

  • @ggtaruc2578
    @ggtaruc25785 жыл бұрын

    Some questions: Would it have been better to unplug the wiring harnesses after the actuator is unbolted? I also noticed you peeled off the electrical tape around the wiring connector. And did you say its better to pop off the lock and latch levers before unbolting the actuator? Is that bc so the actuator is not wobbling as you pop them off?

  • @Bigtime_mcalpine

    @Bigtime_mcalpine

    5 жыл бұрын

    gg taruc maybe although I was thinking That it would’ve been easier with the actuator firmly planted. Yes I had to takeoff the electric tape because it was wrapped over top of the harness tub itself.Yes you are correct if you can’t do the actuator first and then try to remove the arms everything wobble all over the place.

  • @donaldzupko7810
    @donaldzupko78103 жыл бұрын

    Will this work if the fob lock the door but won’t unlock with the fob?

  • @B5244T3
    @B5244T33 жыл бұрын

    Ocean Race spotted

  • @ggtaruc2578
    @ggtaruc25785 жыл бұрын

    Good video. Just wondering why you started with drilling the rivet. I have to do my passenger side. This really helps.

  • @Bigtime_mcalpine

    @Bigtime_mcalpine

    5 жыл бұрын

    gg taruc no reason that I can think of. You could do it at any time.

  • @1952fenlon

    @1952fenlon

    Жыл бұрын

    Looks like the window guide bottom rivets must be out to move the window guide to remove the actuator.

  • @csebastian71
    @csebastian715 жыл бұрын

    Thanks. Going to try this tomorrow on 2009 XC90. It locks on its own when I close the door. Always worried I’ll lock my keys inside.

  • @Bigtime_mcalpine

    @Bigtime_mcalpine

    5 жыл бұрын

    Sebastian Schwarz been there done that. I locked myself out of the car while filming the video actually. I was going to include the footage for laughs but thought better of it. I did learn how easy it is to break in to these cars though!

  • @StrawberryGates
    @StrawberryGates3 жыл бұрын

    at minute 24:30 I can see your almost the entirety of VISA number... You should be more careful.

  • @shawnlee416

    @shawnlee416

    9 ай бұрын

    Not the 1st 4 numbers

  • @giedriuscepas1583
    @giedriuscepas15832 жыл бұрын

    You know that you don't need to turn key TWISE? It's a bit annoying :)

  • @Bigtime_mcalpine

    @Bigtime_mcalpine

    2 жыл бұрын

    Really? That’s the only way I have been able to get the rest of doors to unlock…

  • @ricardoramos3095

    @ricardoramos3095

    Жыл бұрын

    ​@@Bigtime_mcalpine You are correct.

  • @ricardoramos3095

    @ricardoramos3095

    Жыл бұрын

    You have too.

Келесі