Thank you, I have a small patio slab this should do fine.

@JustinsProject

3 ай бұрын

Thanks for watching and commenting 👍🏻

Great explanation, thanks.

@JustinsProject

5 ай бұрын

Appreciate the feedback. Thanks for watching and commenting 👍🏻

That’s a hard job right there! Buddy!

@JustinsProject

6 ай бұрын

It is labor intensive for sure

Don’t need the depth on it can you use it without it

@JustinsProject

9 күн бұрын

I would guess so. I haven't tried that, but I think the blade bolt would act as a stopper at some point. I wouldn't recommend it though.

In the catalog instruction said don't pull push to cut

@JustinsProject

27 күн бұрын

Until you get working on a real job and things don't go as the textbook said it would. Technically, you shouldn't push cut, but it happens. Thanks for watching and commenting 👍🏻

The hammer is good? Appears to have 19J?

@JustinsProject

Ай бұрын

For what it is and the price point - it gets the job done.

Hey thanks for the explanation, it was seriously helpful for answering some questions I had about this saw after seeing it on Amazon. Also I really liked your bucket tip with the little pump I will likely use that at work now. I was just curious, how’s the saw handle when you aren’t concerned about tripping the breaker? Does it ever stall out or can you just power through cuts pushing as hard as you would a gas saw. Also have you only tried it with the included blade or have you also tried it with a well known and trusted blade such as the diablo series. If you have would that help with the issues you’ve mentioned running it on a 20A breaker?

@JustinsProject

Ай бұрын

I only used the included blade. Gas powered is stronger for sure. This one takes a little more patience but it gets the job done.

@benm12310

Ай бұрын

@@JustinsProject thanks for the reply 🙏 answered my questions, think gas is still the best for my uses. Looking forward to more of your vids!

Здравствуйте.тоже Работаю этими ручными резчиками, хорошо себя покозали, только производитель другой.

@JustinsProject

Ай бұрын

Thanks for watching and commenting 👍🏻

I've been using and selling a lot of vevor tools lately

@JustinsProject

4 ай бұрын

Good way to get a project done and recoup some of the cost. Thanks for watching and commenting 👍🏻

Can I plug it in regular outlet outside the house? Thanks in advance.

@JustinsProject

5 ай бұрын

I plugged it in a 20amp outlet in my shop. The other day, I used it on another just outside the shop and it tripped my 20amp breaker about 3 times from me over working it. Thanks for watching and commenting 👍🏻

@RAH_Holdings

3 ай бұрын

Was looking to getting this due to the cost. It says if you are only working with a 20amp outlet to only cut in 2” increments. I assume you went full cuts ? Still might be good for the price.

@JustinsProject

3 ай бұрын

@RAH_Holdings If you go full cuts, it will trip a 20 amp circuit. I have done it on more recent jobs several times since I get impatient 😂 However, if you take it slow, it does great.

@phiksit

10 күн бұрын

These saws are rated at 3200 watts, which comes out to 25 or 26 amps... so probably can't push it too hard unless you run it off a 30 amp circuit.