Check out the TP-LC Loadout here: kzread.info/dash/bejne/k6iK3M1mhNHOc9I.html And remember to hit that like button if you enjoy these videos!

I feel like TP-XL TP-LC and TP-XD are very similar it would be cool to see a video like where you start with the smallest one and fill it up and transfer the tools to the next bag to see the extra space/size difference.

Yay! Love it. You know what I’ve done with my tp bags with the “tablet pockets” you can fit a smaller laptop in there. I told the Velcro from one of my wera sets and put it right on the laptop so it would close and stay down. Works great. I’m loving my XD! I know you’re going to love it too. The versatility of this bag is incredible, it can be as many bags as you need it to be with just a simple affordable panel purchase. I love veto! Looking forward to a loadout. Always love your videos.

You Sir , are an enabler ! Nice Stable ! The V Swap is a neat feature !

Ordered the TP-XD Blackout ang getting the TP6B free promo after seeing your videos. Can’t wait ! Also have the TP-XXL & now there are VSwap inserts for the side pockets coming out. Those will be on my next order. Also running a couple of CP4s setup as support kits that will attach to either bag for specific jobs etc. Using 2, MB3Bs with the 42” shoulder straps for test gear and electronic support. Your videos are awesome and expertly detailed. What a treasure trove of knowledge !! Keep them coming and are much appreciated Sir. Thank you !!

I just ordered the TPXD blackout and it should b here tomorrow,I took advantage of the freebie offer from Veto and getting the TP 6B.Absolutely loved your review on the TPXD blackout. Keep up the great videos.

Excellent presentation as usual--thorough and most helpful!

@MillisConstruction

2 жыл бұрын

Thanks a lot!!

Looks to be very useful, have to see what other v-swap panels are available. Thanks for the video, look forward to seeing how you load it out.

Good stuff. Keep it going. Already bought three tools from watching ur vids

Thanks for showing us that new bag mate. Looks very adaptable. 👍

@MillisConstruction

2 жыл бұрын

Thanks for checking it out 😁🔥🔧

I should of waited for this bag looks awesome.

thank you sir for another great vid! and you are right it is hard to judge the size from a pic

great review as always, thanks.

I bought the TP Xxl after seeing your review, excellent bag that is just the right size, I had a tech XL before, but it become too awkward to carry around

Haven’t been subscribed very long, but have enjoyed all of the videos I’ve watched so far. Hopefully in the near future I can purchase one of these bags. Keep up the good work.

@MillisConstruction

Жыл бұрын

Thanks a lot!!

Very nice Josef😎🛠️😎🛠️😎

I would like to see the XL with pockets like the LC. Would be a perfect bag for me.

It's a great looking bag

Keep up the good work!

Great video! I would love to see a tour/showcase of your entire Veto collection or at least all of your loaded bags and a brief description of their purpose I'm sure you have quite a collection.

@MillisConstruction

2 жыл бұрын

I definitely should! I have a full Wera collection video to make pretty quick too 😅

Great Review Thanks!

Hay you got you a TP-XD. I love this bag. A surface pro with keyboard does fits in the back pocket. edit- the front Vswop will snap onto the back allowing piers to ride higher giving you room for larger tools, chargers and larger meters to fill the whole bottom. edit2- I don’t think you mentioned the base of the TP-XD is 1 inch deeper than the TP-XL to make the TP-XD a little more stable. So basically the TP-XD has the same dimensions as the main compartment of the TP-XXL.

@Zepsswansong

Жыл бұрын

I was just going to ask that too, thank you Sir!

I’ve been looking to get this and the xxl in Australia but it’s proving to be extremely difficult and expensive unfortunately :( Awesome bags though would love to get a hold of them!

Yes! Another Veto to buy!!

@MillisConstruction

2 жыл бұрын

Always!!

Went to our local tool store, they did not have your little stabila level, so may have to order it online.

As always you knocked this out the part and I have to go order another dang bag!!! I want the blackout with hi viz handle but sold out

@MillisConstruction

2 жыл бұрын

I love the high viz look too. This bag had more cool features than I even expected. I’m glad I got it. Hooked my helper up with my TP-XL last week so he’s thrilled I got it too 🤣

@revg2608

2 жыл бұрын

@@MillisConstruction always good to be a blessing to someone else!!!

I have the tech pac thinking on switching to tp xxl

Great video - we keep tools and bags in clean condition, any thoughts on wear and tear over time - is it best to get a blackout or veto regular color scheme? Not to worried about the v-swap. Any thoughts or opinions are welcomed

Really like your enthusiasm and got some great tool tips which burning a hole in my wallet :-(

Big fan of your channel. I really enjoy your videos. Have you looked into the Made in USA Diamondback company? They are really expanding their product line to a variety of bags and accessories that are not just tool belt related.

@MillisConstruction

2 жыл бұрын

I sure have, I’d be wearing their bags if I wasn’t enjoying my Blaklader work pants so much. I’ve been seeing their bags showing up lately. I need to check them out!

I would love to see you do a fluke pack 30 review.

If they did a TP XXL version of this I’d be all in

@spevakdesigns

Жыл бұрын

They have it on the website now. Coming out in a couple months.

Hi, what is is depth of the XD from front to back with the panels removed please.

is there a Veto bag you'd recommend if I want to throw in a compact power drill? In pictures, all of their bags seem like there isn't big enough slot

Hi great Video! I have a couple questions if you dont mind. Your TP XXL comes in at 40 lbs what does your TP XL weigh?? Im also a little curious if the TP XL is tippy at all. I have the TP4B, yes its overloaded but the footprint is too small for its height and I'm tired of it falling over and ready to move on to something a little larger. Thank you for your content!

@MillisConstruction

2 жыл бұрын

I actually gave my XL to one of my helpers but it is almost identical to my XD bag if you’ve seen that Loadout a couple weeks ago. That bag comes in at 19.5 lbs. They can tip but usually if you avoid overusing that front pouch for heavy stuff it doesn’t happen nearly as much 😅. The TP4B is notorious for tipping lol

I think that strap on the back is to help you stack it on top of a wheeler.

@MillisConstruction

2 жыл бұрын

I bet you’re right. I haven’t bought into the wheelers yet

So what is the exact difference in width, veto states uts only about 1 inch. Trying to decide between the 2. Currently I love my TP4B, just want to get a closed top around the same size.

What are the dimensions of the front V-swap panel?

Do they make a Blackout version of the tp-lc?

Hi. I have a question that I hope you can answer. Comparing the TP-LC with the TP-XL or TP-XD, can you actually fit much more in the bigger bags than the LC? The LC comes with those really useful, good sized, side pockets, but the XL and XD only have the smaller pockets on the sides. It looks to me like the bags will pretty all much carry the same amount of stuff, but the tools you’d put in the external pockets of the LC, will just live inside the XL or XD. To my eyes the larger bags don’t actually offer that much more capacity over the LC, or am I missing something? Always enjoy watching your videos, and the enthusiasm you have, from here in the UK.

@MillisConstruction

Жыл бұрын

A lot depends on how you load them too, you can probably fit a similar amount of tools in a smaller bag but they get a bit more jammed in. The LC and XD are my main two bags right now. If you like lighter bags I would definitely start with an LC, it’s kind of a favorite of mine and just like you said, for that side pocket you can put the big pliers wrenches in etc. I love that much more than the tiny pockets. Thanks a lot! Feel free to reach out anytime. I’m pretty easy to get ahold of on Instagram or through the Millis Construction page on Facebook both 😁

@vroom1013

Жыл бұрын

@@MillisConstruction thanks for the reply 👍. I have the LC already (got it for free in the promotion with my OT-LC), and was wondering if it would be worth the upgrade to the XL or XD. I keep my meter and a small box of screws and bits in the outside pockets. They really are handy, and I think I’d miss them if I bought one of the bigger bags. If I’m being honest, I didn’t think the bigger bags offer that much more, especially when you take cost into consideration. It’s hard to resist those Veto bags though, eh? 😂 Keep up the great content 👍

How water resistant are the veto bags of that style with the flap? I'm looking for a super water resistant bag as often the type of work I do takes me in and out of multiple customers homes everyday and when it's pouring rain I'd like to prevent water from getting on my tools as much as possible, but I so prefer a soft bag over a hard water proof tool case or box.

@MillisConstruction

2 жыл бұрын

They do quite well! Especially if you zip the sides of the flap down. If you’re really in that much rain you could probably get the spray on canvas tent waterproofing stuff from a camping store and I bet that would make it even better too.

@duncdunc76

2 жыл бұрын

@@MillisConstruction Thanks for the info! That's a good Idea about spraying awaterproof treatment on it as well. Always appreciate your insight and quality discussion about tools on your chan. Thanks for sharing! I am subbed and consider you one of my top resources when I want to know more about tools and tool accessories.

STOP showing me these things, I cant afford it!!! LOL I just got me TP-XXL! shhhhh don't tell the wife...

Love your reviews ! Interested to find out if I could fit a MacBook Pro 13 in the back of a TP-XXL or TP-XD ?

@MillisConstruction

2 жыл бұрын

If you could give me the measurements I’d be happy to check for you. You’re welcome to message me on Instagram and I can send you pics with a tape measure in place.

@daveneill4549

2 жыл бұрын

@@MillisConstruction Thanks .. 305mm W x 214mm D x 15.2mm H

@daveneill4549

2 жыл бұрын

Any update on if MacBook Pro 13 will fit in TP-XXL or TP-XD

@daveneill4549

2 жыл бұрын

@@MillisConstruction Any update on if MacBook Pro 13 will fit in TP-XXL or TP-XD 305mm W x 214mm D x 15.2mm H

@MillisConstruction

2 жыл бұрын

@@daveneill4549 228 mm wide, 241 mm deep, 25mm thick on the TP-XD. With pouch closed on height.

when you buy the TP XD does it come with the v swaps? or are they purchased separately? Good video

@MillisConstruction

2 жыл бұрын

It comes with everything I had on it in this video. That was direct from veto with no added parts. They have different ones you can get if you need them but this is what it comes with.

@jonathanv8261

2 жыл бұрын

@@MillisConstruction thank you sr, appreciate your time.

Just an idea, your wera sets and pouches would fit that Velcro nice, some of your smaller pouches could take the place of one of the v-swap pockets…

@MillisConstruction

2 жыл бұрын

They absolutely would! I’m seriously looking forward to setting this one up. I gave my TPXL to my helper last week 😁

Veto TP-XD Bag vs Wera tools suitcase. .?

I still haven’t received my TP-LC from the promo

@JayP19AD

2 жыл бұрын

Neither have I and I ordered the wheeler on the 27th of May.

@shshshs2

2 жыл бұрын

@@JayP19AD I ordered mine on May 6 from the DR-XL

We can’t even get the TP-LC in Canada. It’s so back ordered. Veto doesn’t care about the Canadian market.

@MillisConstruction

Жыл бұрын

That’s sad! Do you guys have Velocity bags there? I’ve heard good things about them as well but we don’t have them here

How does this compare to the tp xl?

@MillisConstruction

Жыл бұрын

Almost the same bag. Just with more customization with v swap. Otherwise the same size bag.

This dude is trying to send me to the poorhouse 😢😅

@MillisConstruction

Жыл бұрын

I do my best 🤣 if it’s any consolation I’m headed there with you so you’re in good company and we will have the tools to fix it when we get there

why not just get the one that has wheels? wheels were invented thousands of years ago. It is important to use them whenever possible.