VERY RUSTY HAMMER RESTORATION |
Тәжірибелік нұсқаулар және стиль
#rusty #hammer #restoration
I found an old rusty hammer in my dad’s store room. I gain a new experience in this restoration which is removing the rust from the surface of the hammer and make it reflective.
Пікірлер: 992
For support please LIKE and COMMENT 🙏🏼🧡
In 1998, I found the very same size and type hammer, that had been welded to a piece of 1/2” galvanised water pipe. Removed the pipe, cleaned it up and fitted a proper handle. It has been my main blacksmithing hammer ever since and is a little beauty! 👍😁👏👏
@Metallism
2 жыл бұрын
Very cool
I really kind of love these channels, the “before “ makes me feel pretty good about my welding and fabrication skills!!!
@Metallism
2 жыл бұрын
😄
Ручка для кувалды и молотка должна быть прямая.Так может быть смотрится красиво,но работать будет неудобно.Это моё мнение.Лайк!!!
@user-zz9jt6my5b
2 жыл бұрын
Очень правильно а только деревянным дольжен быт
@levzh7463
2 жыл бұрын
А так же прорезь под клин, 2/3 глубины проушины
@pbsocal1
2 жыл бұрын
how heavy is the hammer?
For restoration purposes, maybe you made it right, but for real life use - not at all. Firstly, welding the hammer is not the best idea, because the metal molecules change their grating and structure. The welded spots become hardened, which is not what you usually want for a hammer. Secondly, the wooden handle you made, it should not have a sharp "support" under the hammer. It should be cone shaped instead. Also, there is no need to use any epoxy. Properly secured handle is good enough and will last the life of the hammer, unless you break it by improper usage.
@user-ix4zs9nf9y
2 жыл бұрын
I do not really understand where the author of the video. but an impact hammer? why is wood not silicone? we live in 21 studies.
@ThinhNguyen-ql2dn
2 жыл бұрын
Yeah, the hammer is not usable anymore, may be a decoration :)
@jamesreichardt7573
2 жыл бұрын
How many hammers have you restored ? Answer none ! What have You restored , if anything ? Answer probably nothing ,
@hid3nax
2 жыл бұрын
@@jamesreichardt7573 I am not into "restoration" business. I just repair the tools. And I have repaired them more than I can count of. This is not only limited to hammers or axles but much much more. What are you trying to say in your comment?
@jamesreichardt7573
2 жыл бұрын
@@hid3nax I like what you did with that miss treated hammer , You turned absolute trash into treasure , I would rather have that hammer than a new one .
Низкий поклон изобретателям болгарки.
@Metallism
2 жыл бұрын
😄
@user-xy9fj3jt9b
2 жыл бұрын
А где-то в уголке нервно курит сварщик, узнав, что его любимый молоток попал к реставратору инструмента.
Awesome transformation. May God bless you for not running the music throughout the entire video. The tool sounds themselves make the best music. Even the sound of wiping on the finish is better than computer generated music. That said, you really do outstanding work. Thanks for sharing with us.
@Metallism
2 жыл бұрын
Thanks 👍 sorry about that 🧡
@ALEX210622
2 жыл бұрын
хули ты хуйню несешь ?))
Теперь это не инструмент, а произведение искусства! Лайк !
@Metallism
2 жыл бұрын
Glad you like it! 🧡
Sort of looks like the hammer for the “Kill’em All” album by Metallica 😉🤣
@Metallism
2 жыл бұрын
😂😂
@fawazasharif3277
2 жыл бұрын
Funny 🤣🤣🤣🤣 Stand up comedy 🤣🤣🤣🤣
@thecookiemangaming5646
2 жыл бұрын
@@fawazasharif3277 but I'm sitting down 😳
@alex_gasanov
2 жыл бұрын
😂😂😂🤘🤘🤘точно(real)🤘🤘🤘
Show parabéns! Que trabalho majestoso!
@Metallism
2 жыл бұрын
Thank you for your comment🙏🏼
Один мой приятель в конце 70-х собирал парадный набор слесарных инструментов, полировал, хромировал. Когда отхромировал сам инструменталь ный ящик его тут же и украли со всем блестящим инструментом.
@Metallism
2 жыл бұрын
So we should not chrome the toolbox. 😉 I'm sorry for hearing that.
Мастер молодец.обладает кучей времени.
@Metallism
2 жыл бұрын
I really appreciate it 🙏🏼
@vahteddineker8701
2 жыл бұрын
Bunu yapabilmek İcin yılların tecrübesi olmasılazım
@user-jn1td2of9y
2 жыл бұрын
@@vahteddineker8701 Дану чтоб ручку сделать что ли . Молоток откавать да !
@valerij5206
2 жыл бұрын
@@user-jn1td2of9y мозги Аткуй!
@sergeyrs6431
2 жыл бұрын
Эх, хорошую вещь испортил, вся железная была, на века. :)
Parabéns pelo trabalho!
@Metallism
2 жыл бұрын
Thanks a lot. 🧡
Great restoration. I look forward to more.
@Metallism
2 жыл бұрын
Thank's for comment 🙏🏻
I love this restoration video keep uploading dear
@Metallism
2 жыл бұрын
Thank you, I will
That's a really nice restore thanks for sharing!!
@Metallism
2 жыл бұрын
Thanks for watching! 🧡🧡
Can you imagine the shock that would transfer into your hand using this thing before it was restored? It would seriously hurt using that hammer.
@Metallism
2 жыл бұрын
🧡🧡
Хорошая работа👍🏼
@Metallism
2 жыл бұрын
Thank you 🙏🏼
I really like how you welded additional material to the hammer instead of removing more. Nice.
@Metallism
2 жыл бұрын
Thanks 👍
عمل رائع غاية في الإتقان 👍
@Metallism
2 жыл бұрын
Thank you so much 🙏🏼
Отличная работа 💯
@Metallism
2 жыл бұрын
Thanks 🙏🏼
Great video! I'm curious, what was that black putty you put in between the top of the handle and the head of the hammer?
@Metallism
2 жыл бұрын
Thanks a lot 🙏🏼 That's two components epoxy paste.
Clean and simple. Attention to detail. Took a lump of rust and turned it into art through craftsmanship.
Looks great!! Enjoyed your video and I gave it a Thumbs Up
@Metallism
2 жыл бұрын
tnx for comment 🙏🏻 I posted another video, I'm glad to know your opinion about it
@oneshotme
2 жыл бұрын
@@Metallism You are very welcome and I'll be looking for it!
The handle may not be right for both sides of the hammer are to be used. This is a cross pen hammer.
@taggartmccormick9142
2 жыл бұрын
my thoughts exactly, i made the same mistake when making a new handle for my cross pen hammer a little while ago. had to do it all over again!
@Metallism
2 жыл бұрын
Thanks for comment but there are models like this www.dewalt.com/products/hand-tools/hammers-and-pry-bars/2-pc-17-oz-hickory-framing-nailer/dwht51418 www.stanleytools.com/products/hand-tools/hammers/framing/22-oz-fatmax-framing-hammer--axe-handle/51-403
@jimgarrett7078
2 жыл бұрын
@@Metallism The links you provide make no sense for those are carpentry framing hammers made to drive and pull nails. Obviously you do know the difference between a cross pen hammer and a framing hammer.
the handle turned out to be uncomfortable, all these extra bends get in the way. The flat head of the hammer is short, in these cases I use a thick spring from the truck, cut out a square and weld it to the hammer.
Ажойиб 👍👍👍👍👍
@Metallism
2 жыл бұрын
Thanks 🙏🏼
Excellent work 👍
Больше похоже на работу пластического хирурга. Отлично!!!
@Metallism
2 жыл бұрын
😄 Thank you
PERFECT BUT NEED MORE MATERIALS AND INSTRUMENTS
Excelente trabajo!
@Metallism
2 жыл бұрын
Thanks 🙏🏼🙏🏼
Damn that came out nice! Great work man,
@Metallism
2 жыл бұрын
Glad you like it 🙏🏼 🙏🏼
Bela restauração, coisa assim é bom de se ver 👏👏👏👏🇧🇷
@Metallism
2 жыл бұрын
Thanks a lot 💚💛💙
When i push a piece of wood on a bandsaw, i allow no one to clean the table and pull it at the same time. I want to keep thumbing up as long as i can.
@Metallism
2 жыл бұрын
Thank you so much my friend. 🙏🏼🙏🏼
Да ты смелый парень , работать болгаркой без защитного кожуха )))
@Metallism
2 жыл бұрын
I didn't have enough experience at that time. 🙃
Muy bueno como quedó ese martillo excelente restauración !!!!!!!! 👏👏👏👏👏💯💯💯💯💯
@Metallism
2 жыл бұрын
Thanks a lot 🙏🏼
Excellent job, great skills!
@Metallism
2 жыл бұрын
Thank you so much 🧡
I know that the importance of safety is different for everyone but lord! Some very sketchy stuff going on here. Dude nearly lost some fingers on that tablesaw. At least homeboys sleeves were buttoned up while using the bandsaw.
@Metallism
2 жыл бұрын
Thanks for your advice 🙏🏼 Sure, I will
@bms9144
2 жыл бұрын
It made me nervous too. Counterpoint is that the guy looked like he had been using saws like that for a long time, and still had all his fingers. Not something I would do. If he loses one, he will have no one to point a nub at, but himself.
You did not repair a hammer, you created a work of art !!! Magnificent job .
@Metallism
2 жыл бұрын
Thank you very much! 🙏🏼🧡
espetacular que ficou o martelo
Question please: what’s the brand and model of that bench grinder? Looks like a nice setup in terms of size, paper, noise and also that chuck on the side to put a flex shaft I guess? Thanks.
@Metallism
2 жыл бұрын
It's a Chinese brand like Einhell
@abdenourderouazi3898
2 жыл бұрын
@@Metallism Thank you. I’ll look it up.
All I could think is what happened to that poor hammer to get it to that state. Bravo to you sir for restoring it magnificently.
@nigelft
2 жыл бұрын
I want to know which barbarian welded that rebar onto into, and badly as well ...
@j.chaitlal9421
2 жыл бұрын
@@nigelft people that actually work
@Metallism
2 жыл бұрын
Thank you so much 🙏🏼
Un travail remarquable. Bravo.
@Metallism
2 жыл бұрын
Thanks a lot 🙏🏼
Great job!🪓🛠️🔧😁
@Metallism
2 жыл бұрын
Glad you liked it! 🧡
Какой-то вандал приварил трубу. Ужас. Мастер браво, подарил вторую жизнь инструменту.👍
@Metallism
2 жыл бұрын
Thanks so much 🙏🏼
@user-ji7sc5dz9g
2 жыл бұрын
Получился музейный экспонат. Им работать нельзя.
@user-cw6bg1im1d
2 жыл бұрын
Тут скорее зря дерево перевели.
Это очень круто, просто произведение искусств!
@Metallism
2 жыл бұрын
Thanks a lot 🙏🏼
@paedahe4975
2 жыл бұрын
I agree. 👍 Well done restoration.
@SegaPutin
2 жыл бұрын
ага прям в музей
liked and subscribed just because the thumbnail is impressive ❤️ now i’ll watch the video.
@Metallism
2 жыл бұрын
My pleasure 🙏🏼
Muito bom gostei 👏👏
@Metallism
2 жыл бұрын
Thank you I'm glad you like it.
Please be more careful mate, we want to watch more of your videos but if you've got no fingers it'll be a bit more difficult to restore things. We care. Good video.
@Metallism
2 жыл бұрын
😂 Thanks for comment my friend. Sure I will.
@paedahe4975
2 жыл бұрын
Watching your hands so close to the band saw and table saw blade made me nervous just watching it. You could customise your own push sticks... Be safe. Merry Christmas 🎄
Мастеру респект! Я бы этот молоток выкинул в металлолом!
@Metallism
2 жыл бұрын
😊🙏🏼
@Dmitrii.Semenov
2 жыл бұрын
Чего не сделаешь ради просмотров...
Nice rusty hummer 👍👍
Master of the angle grinder. Good job sir.
@Metallism
2 жыл бұрын
Thank you very much! 🙏🏼
Someone did everything they could tell keep that hammer alive.
@Metallism
2 жыл бұрын
I'm grateful for your comment 😍
Acho que o custo energético que ele teve para restaurar esse martelo, daria pra comprar dois novos.
@pizzarat7825
2 жыл бұрын
Thats a hobby for you!
@Metallism
2 жыл бұрын
Ok. you do that.
Muito top...👍🏻👍🏻👌🏼👌🏼
@Metallism
2 жыл бұрын
Glad you like it 🙏🏼
Beautiful restoration and an enjoyable watch. Great transformation.
@Metallism
2 жыл бұрын
Glad you enjoyed it 🧡
Мастер. Работа великолепная очень всё, красиво. И окуратно. Лайк. 💯 Подписка, на канал заранее спасибо. Ждём новых видео 📹 роликов. Удачи 🤞
@Metallism
2 жыл бұрын
Thanks for comment. it's my pleasure that you like my channel. 💪🏼🙏🏼
Это не ерунда , это рабочий инструмент , и мастер исправил ошибку прошлого . Хорошая работа , все правильно, так и надо , а в метал всегда успеется.
@Metallism
2 жыл бұрын
Thank you my friend 🙏🏼
To hell with Thor's hammer, I want THAT one lol. Outstanding finish!!!
@Metallism
2 жыл бұрын
Thank you so much 🙏🏼
Wow! Smashing job.
@Metallism
2 жыл бұрын
Glad you like it! 🧡
Я сегодня гаечный ключ 32х36 отшлифовал. Теперь жалко им порльзоваться.
@antonioebuko9447
2 жыл бұрын
Отдай трактористам или сварщику, они из него сделают то что надо.
@stell33.stell33
2 жыл бұрын
@@antonioebuko9447 самому нужен.
Great job, even if it were kind of dangerous at some points 6:44. And as pointed by others, the welding of the battered parts without normalising and annealing the hammer afterwards, has probably damaged a bit its structual integrity. Technically speaking, the first handle, the welded one, was literally indestructible. Of course with the added weight, you had to be Thor to wield the hammer afterwards. But the outcome is a beauty.
@Metallism
2 жыл бұрын
Thanks for feedback, I'm pleased with the details that you see in this video. 🧡
@noe29933
2 жыл бұрын
While the steel handle is a lot stronger the rebar as a handle would do your wrist no favours I worked at the steel game for 11years what he did even that welding will in no way harm it C02 weld is a hard weld now if it were cast then he would be ruining the metal you need cast metal rods to weld cast 👍
You really an artist great job bro
@Metallism
2 жыл бұрын
Thank you very much! 🧡
Absolutely beautiful.
@Metallism
2 жыл бұрын
Thank you very much! 🧡
I like the fact that you decided to weld the parts that were too battered... I would have loved it, had you normalised and annealed the steel before you filled it... and then had it tempered and hardened once more, before finishing it... it might be a problem when you just weld damaged parts in a high carbon hardened steel hammer face... it is a beautiful job regardless, but just take care to not use it for heavy-duty hammering...
@Metallism
2 жыл бұрын
Yes, You're right my friend. 🧡
I also will spend $650 to save a $10 hammer
@nabilalbusaidi7687
2 жыл бұрын
الموضوع لا يتعلق بالمال بل بالهواية ينفق الكثيرين اموالا كثيرة من اجل هوايتهم
@marlinaabenk7849
2 жыл бұрын
😂
Beautiful! 👍🏻
@Metallism
Жыл бұрын
Thank you! 🧡
Very nice job. Beautiful hammer
@Metallism
2 жыл бұрын
Thanks 👍
Good ,very good job
@Metallism
2 жыл бұрын
Thank you Zak 🙏🏻
@user-dh7rk9xh1b
2 жыл бұрын
You anlin
As a blacksmith, Im telling you, u just ruined hammer, and I mean u welded on the face and peen of the hammer, and u destroyed the hardness of it by doing it. I hate when I see people doing this....
@Metallism
2 жыл бұрын
You're right I didn't know that. This is an old video.
@fearthereaper298
2 жыл бұрын
@@Metallism if your hammer is not hardened, it will mushroom the face or the peen to the sides, and that will lead to shrapnels, which are very dangerous
Amazing 👍👍👍👍
@Metallism
2 жыл бұрын
Many many thanks
Humble comment sections do exist, lots of love here 💪, your work is inspirational.
@Metallism
2 жыл бұрын
Thank you 🙌
Зачем тратить столько времени и сил из за ерунды
@Metallism
2 жыл бұрын
Then don't 😉
@vahteddineker8701
2 жыл бұрын
Yapacak birşey bulamassan böyle seylerinen uğraşırsın
@BohAntoh
2 жыл бұрын
Как зачем? Мы же посмотрели😁
Ich mag Menschen die altes Werkzeug zu schätzen wissen. Die Aufarbeitung ist dir hervorragend gelungen. Ich bin sicher, der Hammer wird dir lange Zeit gut dienen und du wirst Freude haben ihn zu benutzen.
@Metallism
2 жыл бұрын
Thank you for nice comment 🙏🏼
Perfektne odvedena praca z uplneho šrotu rukovet z jasanoveho dreva to je najlepsie drevo aj na sekery lebo pri praci nepalia ruky dobre je ked sa rukovet ostruha sklennym črepom bud zdravy pozdrav zo slovenska 🇸🇰🇸🇰🇸🇰🇸🇰🇸🇰
@Metallism
2 жыл бұрын
Thanks for comment my friend 🙏🏼🙏🏼
Good job....
@Metallism
2 жыл бұрын
Thanks 🙏🏼
Bravo pour le boulot ! 👍
Waoo very good job interesting.
@Metallism
2 жыл бұрын
Thanks a lot 🙏🏼
How did the hammer head get from satin finish to polished?
How is the balance since you offset the center on bottom of handle??
Mistrz! 👍👍
@Metallism
2 жыл бұрын
Thank you my friend 🙏🏼
NICE SAVE! Adam
@Metallism
2 жыл бұрын
Thanks 🙏🏼
Great restoration 👌
@Metallism
2 жыл бұрын
Glad you like it 🙏🏼
Amazing 👏🏻😍
@Metallism
2 жыл бұрын
Thanks 🔥
Beautiful results, buddy.
@Metallism
2 жыл бұрын
Thank you kindly 🙏🏼
Very nicely refurbished. I like the handle wood. Way better than the usual flame burnt types so many do. Thumbs Up
@Metallism
2 жыл бұрын
Thank you very much! 🧡🧡
@tommypitcock6646
2 жыл бұрын
The burnt handles prevent blisters and allow for better grip with less force
Nice job, mate! Liked & subscribed
@Metallism
2 жыл бұрын
Thanks and welcome 🧡
One beautiful birthday present that would make for any handy dad or mom. Niceee :)
@Metallism
2 жыл бұрын
Yes, thank you 🙏🏼
THOR must be proud of you mate....🔥🔥🔥
@Metallism
2 жыл бұрын
😎🧡
Ok, let's go beat up something, anything will do. This hammer will definitely destroy wooden objects, and reek havoc on most metals. Thanks for sharing. 👍😁🇨🇱🇺🇸
Честитам мајсторе, врло лепо урађено. Ја такође волим рестаурацију, дође ми као да ствари поново оживе. Поздрави из Србије.
@Metallism
2 жыл бұрын
Thank you so much 🧡🧡
Good job man 👍🏼👍🏼
@Metallism
2 жыл бұрын
Thanks for the visit 🙏🏼🙏🏼
Darn fine job 👌
@Metallism
2 жыл бұрын
Thanks a lot 🧡🙏🏼
Excellent!
@Metallism
2 жыл бұрын
Thanks 🙏🏼
Хорошая работа я так же люблю восстанавливать старые инструменты даже если не пользуюсь ими - спасибо за такую работу
Great job! What was the putty u used?
@Metallism
2 жыл бұрын
Thanks a lot 🙏🏼 Two component epoxy.
Nice work 👌👌👌👌👌
@Metallism
2 жыл бұрын
Thanks a lot 😊
Trabalho de recuperação impecável. Agora só precisa aprender a cortar com a serra ou serrote manual. Para trás tem de aliviar a lâmina, porque se for cortar metal duro, vai-se partir o dentado, seja a folha de aço rápido ou não.
@Metallism
2 жыл бұрын
🧡🧡🙏🏼🙏🏼
Well done my friend,from, Bayamo, Cuba
Ай да Молодец! 👍Золотые руки!!!
@Metallism
2 жыл бұрын
Thanks a lot 🙏🏼🙏🏼