Love all the details you included on this video

@WT4T

4 ай бұрын

Happy to bring something slightly different to the normal KZread style of auto content

Great video!

@WT4T

4 ай бұрын

Thank you

I wish Cobb came out with a real intake ;( I have their stage 2 package and pro tuned but damn! ETS does really well with the VBs! Nice channel and good info. Love your vids on actual parts and tune comparison.

@WT4T

4 ай бұрын

Thank you for watching! I really like ETS as well and their local. PERRIN is also local to us.

Nice test! I guess the larger diameter kind of helped the ETS up top as expected.

@WT4T

4 ай бұрын

Larger diameter and a velocity stack.

Awesome video as always! Can you also do AEM VS MISHIMOTO VS AMS? Thanks!

@WT4T

4 ай бұрын

If only there was time and a budget for that. It would be pretty silly though as unless any of those other ones are 3in and have a velocity stack they're not going to be better than the ETS.

@william3228

3 ай бұрын

According to subispeed AEM beat out ETS which beat Perrin.

@WT4T

3 ай бұрын

@william3228 I've tuned quite a few AEM. Zero chance once tuned it's better. Untuned it's all which tricks the ecu into thinking it's flowing less (but not too much less) airflow which isn't a fair comparison of actual power gains since you really MUST tune the car for any intake you install.

Just a request but I would love to hear and see the results of an INTERMEDIATE PIPE. I hear great things about this and how it will help make your car not only faster but sound so much better as opposed to a simple Catback.

@WT4T

4 ай бұрын

Well, this car has the full turboback now and it sounds pretty good.. I'm not a huge fan of loud for the sake of loud but this isn't bad at all.

Have you done a comparison of Cobb intake vs ETS intake? I have the Cobb stage 2 setup and honestly just looking for a bit more sound, but also curious about differences in efficiency.

@WT4T

4 ай бұрын

I have tuned on the Cobb but I have not done a back to back on this car. Cobb is good but the ETS is undefeated

I don’t like where the MAF is placed on the Perrin. The air is going to want to hug the long side radius as velocity increases and there isn’t much room for it to equalize after is straightens out before it hits the MAF. Still, it seems like you were able to get a decent result on the scaling.

@WT4T

4 ай бұрын

Digital frequency MAF's are so much better than old 0-5v mafs however it still definitely had a little oddness that the ETS did not.

@JordieG8

4 ай бұрын

@@WT4T agreed, they’re definitely more forgiving. Still, I would like to see as ideal possible when it comes to airflow stability over the sensor. But in the end #fulltimeclosedloop!

Perrin includes convenient assembly lube, so +1 point for that

@WT4T

4 ай бұрын

So much lube I thought I was at a rally event

The oil on that Perrin intake! You cannot tell me that won't pull through with the turbo sucking at full blast! I'm going with either AEM or ETS. If I get the ETS, I'm going with a dry filter to replace their oiled. The Perrin gets really expensive if you want what the ETS gives you from the start. Add the heat shield, inlet to the Perrin makes it more expensive than the ETS and heat shield.

@WT4T

4 ай бұрын

Yeah, I'm really not a big fan of the oil.

Just a random question not related to your video per say. What kind of dyno numbers could someone expect from a dyno tune with the following mods, ETS intake, ETS J pipe, ETS Catback Extreme Exhaust, ETS Front Mount Intercooler, and an E60 tune? Also a IAG AOS.

@WT4T

4 ай бұрын

High 300's for hp. Really just whatever boost the turbo will make up top. Torque would be whatever you wanted honestly....

@ironmandingo1

4 ай бұрын

lets say you made over 400 whp on this car ,could you keep the torque manageable without going over 400 ft lbs?@@WT4T

Ets ftw

May I know whats the brand of the rear wing? Look nice!

@WT4T

4 ай бұрын

www.preracing.com/products/subaru-wrx-gtc-200-adjustable-wing-2022-current

Taco time!

@WT4T

4 ай бұрын

Yes please. willtunefortacos.com/products/buy-this-tuner-a-taco

Wonder what the rae motor sports intake numbers are.

@WT4T

4 ай бұрын

From looking at it probably very close to the Perrin.

I would be interested in seeing the new AMS intake tested. Personally, I have a Process West Intake and it has been great so far (Protuned of course). I believe the Perrin and AEM use the same or about the same size MAF as the stock intake/airbox. PW uses a 72mm MAF and I am not sure what size the ETS is but it is bigger than stock for sure. I believe the stock MAF size will definitely be more of a restriction up top and even more so with Turbo upgrades and more/better flow.

@WT4T

4 ай бұрын

If they send me one I'll stack it up against the ETS.

@chads7796

4 ай бұрын

Sounds good! I will be installing the Perrin Turbo Inlet real soon (per your advice/previous video). Thanks for all your work/content!

@WT4T

4 ай бұрын

The inlet is a GREAT part!

@JordieG8

4 ай бұрын

Probably, however you don’t want to stray too far away from the factory MAF size as you start to lose MAF resolution the larger the housing gets.

@WT4T

4 ай бұрын

@JordieG8 actually on digital MAF that's not really an issue.

What about intake temps from the Perrin that isn’t really closed box compared to the ETS that’s more of a closed box? Do you see a big difference maybe to cause a lower hp over time?

@WT4T

4 ай бұрын

Definitely going to heatsoak worse. It wasn't an issue on the dyno but I have lots of airflow on the car.

@CRMAG87

4 ай бұрын

@@WT4T last dumb question. Why do you think that ets has been the only company to make a bigger intake over the others? Seems like you do get top end from that but reliability is also key for most?

@WT4T

4 ай бұрын

@CRMAG87 the issue is "tune required" vs just run it. Ets has a solution for that as well, with the removable intranasal internal sleeve.

How is the Cobb intake compared to the ETS?? I’m in Cali and I’m running an ETS intake and I rather be legal but I’m afraid to lose a lot of power

@WT4T

4 ай бұрын

It draws through the factory maf housing and charcoal filter, so, it's better than stock, but not as good as the ETS.

@claudio_wrx

4 ай бұрын

@@WT4T oh ok, I took off the charcoal filter

Man I wanted to ask I have new 2023 wrx, I got like 780kms on it and it only produce 12.2 pounds boost? Is there something wrong or that’s stock configuration

@WT4T

3 ай бұрын

Welcome to the stock tune 👍

Another great vid .. did you have sleeve in or out in the ets?

@WT4T

4 ай бұрын

100% out

@Lemon8id

4 ай бұрын

Out if you respect your car for a tune. Leave it in if you are too cheap to tune

@timeout9851

4 ай бұрын

My tuner said the car didn’t like it with sleeve out, once put back in it tuned up nice, thought it was unusual that’s why I asked @@Lemon8id

@Lemon8id

4 ай бұрын

@@timeout9851 sleeve in retains intake size.. sleeve out allows for more air. Curious who your tuner is

@timeout9851

4 ай бұрын

Correct, there’s no need to name the tuner@@Lemon8id

Is the S1 on your website and OTS or a full etune? Thanks

@WT4T

3 ай бұрын

The staged maps are all OTS.

Would you be able to compare top mount inter coolers from ETS and Perrin?

@WT4T

4 ай бұрын

Honestly, I'm about done with top mounts, so useless. Fmic will be soon.

@JerryNeutron

4 ай бұрын

why do you say they are useless? @@WT4T

@WT4T

4 ай бұрын

From a thermal standpoint bigger tmic is just going to give you more heatsoak to overcome and because it's on the top of the motor heatsoak is all it's going to do.. Due to the low mount turbo design of these cars fmic is just superior in EVERY way.

@JerryNeutron

4 ай бұрын

I noticed the Perrin FMIC is about $500 more expensive than their TMIC. Are the differences big enough to justify the premium in your opinion? @@WT4T

Does your Perrin foam have what looks like a slash on the foam filter? It troubles me that mine has... 😣

@WT4T

4 ай бұрын

There's a glue line, other than that no slash

@earlconda7774

4 ай бұрын

@@WT4T then I need to get back at them and ask why mine has it. Great review btw! Still needs to get tuned after the Perrin install.

@WT4T

4 ай бұрын

I have OTS maps available for Perrin intake now.

@earlconda7774

4 ай бұрын

@@WT4T noob question, do I need the Cobb AP for any custom tunes like that one?

@WT4T

4 ай бұрын

Really depends on the platform. I've found it works best on the vb. However, there are a couple of other options on the market.

I'm curious to see how an aem intake compares.

@WT4T

4 ай бұрын

I'm really not. It's an oem size maf, it's not going to make more than either of these.

@raymullen8427

4 ай бұрын

@WT4T so probably similar to the perrin since it's oem maf, but with a better sealed box like the ets

@WT4T

4 ай бұрын

Perrin is slightly larger than oem but not much.

@raymullen8427

4 ай бұрын

@WT4T Thanks for the replies. Also love the channel and the content!

Mall a