See Build Sequence Below.
In this #vanlife video we're going to tell why and how we installed CTA swivels and lower OEM risers in our 2019 RAM Promaster. This video is not meant to be a complete step-by-step how-to video but an overview of the issues we ran into when installing our swivels and bases as well as the solutions to those problems that we encountered.
Related Products and Links:
CTA Swivels on Amazon
www.amazon.com/dp/B017LQX282?...
OEM Risers from Steve White Motors
www.stevewhiteparts.com/oem-p...
Install video from WanderingWakes
• Seat Swivel (CTA) and ...
Watch our other van build videos:
A Complete Tour of Our Van
• Van Tour | Our RAM Pro...
How We Got Started Living Van Life and Building Our Van
• How We Started Van Lif...
OUR VAN BUILD SEQUENCE OF STEPS:
1. Swivel Seats
2. Windows
3. Floor insulation and rough-in
4. Insulation - ceiling, walls
5. Roof Rack
6. Solar Panels (rough in)
7. Fan (rough in)
8. Electric Panel (rough in)
9. Ceiling lights (rough in)
10. Ceiling and cabinet brackets
11. Furring strips on walls
12. Walls
13. Propane
14. Heater
15. Trunk lining
16. Vinyl Flooring
17. Water
18. Electric finish
19. RGB Strip lighting
20. Bug Screens
21. Steps
22. Outdoor Shower
Check out our other Van life and #vanbuild videos on our KZread channel here: / cubbyvanlife
Music licensed through KZread.
#Vantour #vanconversion #vanbuild #RAMPromaster #Promaster #cubbyvanlife #vanlife #vanlifestyle #nomadlife #travel #RV #nomads