V8 Thin Wall Guide Repair | Series 2 Trans Africa Rebore |
Спорт
In this video, I repair some American V8 guides. We were privileged to be asked to Rebore the Trans Africa Land Rover.
Hope you enjoy.
James.
#engine #engineering #classiccars #v8 #landrover #rebore
Пікірлер: 21
James - really clear logical explanation and easy to follow. Virtually all these vlogs teach us something and further explanation of the honing process would be great
@graceenginedevelopments
3 ай бұрын
Thank you. I can do make a honing video soon, I'm saving for a machine that shows the crosshatch and finish so I might wait until I've bought that.
Great video showing honest problems encountered and practical solution. There’s some channels that would edit the trouble bit out. Cheers, well done.
@graceenginedevelopments
3 ай бұрын
Thank you.. we want to show everything not just the good bits.
Excellent video and explanation of the work being carried out!
@graceenginedevelopments
3 ай бұрын
Thanks Kevin
Smooth operation. Again. Cheers
@graceenginedevelopments
3 ай бұрын
Thank you
Yes a peaks and valleys video please
@graceenginedevelopments
3 ай бұрын
Ok I will plan that for you
Good morning James, watching your video on the Guideliner installation. I feel for you having the install problem. Been there and done that. I liked the original Kline tool, it was slower but rarely ever had an issue. Recently I measured the install tool and the problem is the ring is oversized. The part that supports the O.D. of the guide. I will do a video on the subject of the problems and issues related. Another problem is some of the guideliners are not manufactured correctly. It is not the Kliners, they are fine. I do really like guideliners,, properly installed and they are great!. I like to guide hone and put a slight cross hatch. Nice work James.👍👍 Have a great day.
@graceenginedevelopments
3 ай бұрын
Thanks Ed, yes I did run the hone through them but forgot to film.. I like the liners too.. hope you're well.
Great explanation for a seldom heard of procedure. By the way, my '43 flathead you did the small end bushes in is running sweet AF 😉🍻
@graceenginedevelopments
3 ай бұрын
Thanks mate. Glad to read that.
When do you start racing again , that pit crew looks like they would take some handling I think I would fit in . Kit from down under
@graceenginedevelopments
3 ай бұрын
Racing started 2 weeks ago, but I fell on a rolling road at 70 mph and found out I've got really high blood pressure, so I'm sitting a couple out.. your welcome to come and join the team
Why not just turn up a set of guides
@graceenginedevelopments
3 ай бұрын
You can buy them and machine the heads to fit.. thin walls are a great repair though
Looks like you need some new honing oil, must have had that oil 30 years atleast I reckon!!!
@graceenginedevelopments
3 ай бұрын
Thank you, would you like to treat me to some please
@dangleeballs8382
3 ай бұрын
Absolutely I would, just tell me which brand and I'll make it happen xx