Converted the 331 to NA what a sound!! Redline is 7400rpm ! Please subscribe to SteelAnkles KZread Channel.
Жүктеу.....
Пікірлер: 289
@woohunter1 Жыл бұрын
Props to the cameraman for holding steady.
@E4RLIES
Жыл бұрын
I wish I’d read this before attempting my own humour sorry mate🤓🤣🫣
@havik3420
Жыл бұрын
That's because he's stuck to the bottom of the car with really strong neodymium magnets
@IamIanOficial
Жыл бұрын
@@havik3420 r/whoosh
@3n3ly7m9
Жыл бұрын
@@IamIanOficial nah the camera man thing is getting old.
@garthinator2968
Жыл бұрын
😂😂😂
@VetteComp Жыл бұрын
When you Upshift, It Snorts, when you downshift, it grunts, and when you let off, it spits fire! -Clarkson
@meemdoggoriginallongdrink
Жыл бұрын
Was that from Jaguar F-type review?
@nashvilleoutlaw4 жыл бұрын
0:47 best brakes ever!!
@Crazyarnold12
4 жыл бұрын
Ha that’s funny
@bananaman2184
3 жыл бұрын
LOL
@steelankles
3 жыл бұрын
yep dang road racing brake pads lol
@jangabrielreyes4754
3 жыл бұрын
Imagine the g-force lol
@Mchacz8008
3 жыл бұрын
Instant-st-o-p-matic
@sagenbabin87862 жыл бұрын
There’s a point at 7000 rpm where an American v8 turns into a demon that sound it’s at about 6400 to 7000+ where it just screams and it is the greatest sound on this earth
@mrbrowneyes74
Жыл бұрын
the greatest sound on this earth?🤣😂🤣
@sagenbabin8786
Жыл бұрын
@@mrbrowneyes74 it is Yes I jus read this back me acting like there’s multiple earths 😂😂😂😂🤣😂😂
@lunytoonz3466
Жыл бұрын
Ah i see the No Man's Sky reference👌👍
@sagenbabin8786
Жыл бұрын
@@lunytoonz3466 yes exactly
@beauxr.benoit1374
Жыл бұрын
@@mrbrowneyes74 We have to live somewhere else before we can add anywhere else.
@TimeandRelativeGaming20154 ай бұрын
This and a 5 cylinder are some of the best sounds to ever come out of a vehicle
@TheBanjoShowOfficial Жыл бұрын
I find it insane that there's the smallest split second between shifts that there is literally no sound until the engine roars back into life like 1:09
@hooniganruiz5613
Жыл бұрын
The pause of the cylinders being filled with a bunch more fuel
@frostyl4269
Жыл бұрын
😩that is a GOOD noise.
@KidCoyle
Жыл бұрын
I love this. Been looking for a compilation of it for years now. Maybe I need to learn how to do it and make a vid haha
@E4RLIES Жыл бұрын
Kudos to the brave camera man for hanging on so we could all enjoy that 😊🙌🏼👍🏼👍🏼
@nxxxxxs
Жыл бұрын
ur so funny and original
@E4RLIES
Жыл бұрын
@@nxxxxxsalas no my friend. But I did post it before I saw the other similarly ‘hilarious’ comments🤓 Let’s all just be glad noises like this still exist 🤤
@cemsengul165 жыл бұрын
A pushrod sounds amazing at high rpm. Its a shame they don't come with a high redline from the factory
@AmilcarPenya1703
4 жыл бұрын
they sound good at any rpm!
@VicinalElk44104
4 жыл бұрын
Chevy 302 did. Those things could turn over 8k rpms from the factory like it was nothing. Seen a few of them run almost 9k rpms
@kelvinjones8650
4 жыл бұрын
No conventional American small block is going to turn over 8k from the factory reliably. I would put my bottom dollar that if you took a never opened 302 or 289 either would be torn up by the 3rd pass. Stock motors are normally terribly balanced from the factory due to the mass production. So if it’s not the balance I would guess the rod bolts would begin to back out by around 7k. And if not the rod bolts a valve would without question kiss a piston with the stock springs and timing set. So if you seen a 302 do that I would imagine they lied about their motor.
@robertelmo7736
4 жыл бұрын
@@kelvinjones8650 You are taking Ford and he is talking Chevy 302. Not sure about those 8-9k claims, but the DZ was a serious Vtec piece like the Boss 302.
@fredofarrell2455
3 жыл бұрын
Chevy 302 and mopar 340, short stroke big bore pushrod engines rev 7500-8000 rpm
@stoneeh Жыл бұрын
Props for getting you audio recording not to distort / clip at those SPL.
@Mprikiman
9 ай бұрын
amazing camera mic to say the least... I am wondering what setttings he used.
@Gkitchens1 Жыл бұрын
The cameraman is so brave to hang off the back like that
@BM205
Жыл бұрын
Very brave! He was in a trailer behind the car
@paulsalmon47712 жыл бұрын
I could listen to this all day
@maciekcichPOLAND
Жыл бұрын
And all night
@Mr357Cleveland4 жыл бұрын
Sounds awesome mate. You've got a new subscriber.👍
@steelankles
3 жыл бұрын
thanks!! enjoy
@Mchacz8008 Жыл бұрын
It needs to have more likes! The sound is brillant!
@AmilcarPenya17034 жыл бұрын
idle sounds like the drum intro from hot for teacher
@Bigfr4nk
2 жыл бұрын
Mine sounds like the intro to down with the sickness
@Deano_77
Жыл бұрын
Exactly how it sounds
@larrykeel2739 Жыл бұрын
That sounds sick!!! Awesome video too
@bartekowczarek6861 Жыл бұрын
this vid makes ma calmer and excited at the same time
@JimmyHondaRacing12 Жыл бұрын
THAT. SOUNDS. AMAZING.
@MrTaff22 Жыл бұрын
this is one the most beautiful things I have ever seen!
@sswcubes3 жыл бұрын
Beautiful music...
@fourthhorseman4531 Жыл бұрын
You're playing the music of my people!
@DaMovienator Жыл бұрын
What a beautiful sound! I cant say it often enough... E-mobility might be (a big part of) the future BUT NOTHING will ever replace gas/diesel engines!!!
@devensaiz7039 Жыл бұрын
That sounded delicious
@jasonthompson1119 Жыл бұрын
This sound made my day 😊
@matthewguillory5008 Жыл бұрын
Badass brother!!
@tylermatthews6130 Жыл бұрын
THAT SOUNDS SO GLORIOUS
@derautopadagoge8899 Жыл бұрын
What on earth…. Gorgeous!
@kargmeister Жыл бұрын
Pretty much exactly what my foxbody sounds like. Longtube headers, x-pipe, bullet mufflers and dumped by the rear end. Loudest car around and turns everyone's heads.
@lokitmg4123
Жыл бұрын
W
@SKITTLESHD2020 Жыл бұрын
That thing sounds so good 😍🤤
@altaccount46972 жыл бұрын
DAMN that thing sounds awesome!
@chasebh89 Жыл бұрын
Now that's a beast
@Ilovemyidi Жыл бұрын
That literally sounds so good, it kinda reminds me of my foxbody
@high1voltage1rules Жыл бұрын
Sounds so so nice 👍🫶🏻💯
@TheJamesbomfray Жыл бұрын
Beautiful ❤
@petemills81 Жыл бұрын
Omg…. LUV IT!
@petemills81
Жыл бұрын
Never have I ever been so jealous
@TheSniper799 Жыл бұрын
This v8 sound is music for me 😁
@supersportX22 Жыл бұрын
Que som absurdo de lindo!!
@_kunkle Жыл бұрын
8,000+ is where the real fun is at
@gossi9319 Жыл бұрын
This is way to good
@artysmotorsports3 жыл бұрын
Holy moly 👌
@bewaretheclaw Жыл бұрын
good job on the tank
@re_modulate Жыл бұрын
That is a healthy boy.
@WRIGHT-GARAGE Жыл бұрын
the sound of a small block cannot be beat.
@v_stands_for_value124 Жыл бұрын
This thing is like AAAAAAAAAAAAAAA .. ok let me breath a little.. AAAAAAAAAAAAAAA
@liny2sd Жыл бұрын
Is that red thing we’re looking at a fuel pump?
@Joshua_N-A2 жыл бұрын
The higher the better.
@noahbolt Жыл бұрын
Who else thought this was an S197 Mustang until he went WOT?
@1oldskoolluvr Жыл бұрын
Maaaaaan.....this video is a bigger tease then when my wife is in a teasing mood. 1st gear pull: whaAAAAAAAA! quick snap into 2nd: aaAAAAAAAAAAA! quick snap into 3rd: aAAA....burble-burble-burble-burble..... 😂 Brother, you need more open road for a part deux. 😁
@alanbenedict4743 жыл бұрын
Snarling
@makingcash4life3 жыл бұрын
Alas, a lion reincarnated in metal visage. Careful brethren, for the siren is singing her song.
@dannovic Жыл бұрын
What microphone did you use?
@solitaire5142 Жыл бұрын
The deceleration is f#cking awesome.
@ahimeirhadad4836 Жыл бұрын
Cross Plane Crank V8 sound
@triple6758 Жыл бұрын
I like explosions!
@immortalcars5256 Жыл бұрын
How much power did you make NA. Making a 331 11.5:1 compression hoping 7200 redline
@nycyabber7103 Жыл бұрын
My homie used to have a B7 RS5 that rev'd to 8500. Shit was fantastic. Prob on of the best sounding cars I've ever heard.
@YegaSRT Жыл бұрын
I gotta try this with my HEMI 😎
@blep6173 Жыл бұрын
when v8s have displacement and a high pitch they sound very good. low too... i think i just like v8s
@Apollo5752353
Жыл бұрын
V8's are love, V8's are life
@vikonemedia1 Жыл бұрын
when you hear the feul pump going you know u fucked up
@trxtech3010 Жыл бұрын
Sounds good!
@adansmiff3668 Жыл бұрын
🔝
@_.incredible_magnum._2912 жыл бұрын
I've come to pick your brain. I have a 98 durango with the 5.2 magnum. I wanna run it to at least 7100rpm. What would you recommend? The crank is 3.31 and bore is 3.91. I was thinking about boring it out to 4in and using 6.0 vortec flat top pistons for higher compression. What cam specs should I be running
@chrishansen7004
Жыл бұрын
You should be worrying more about the top end your really gonna need a really good short runner intake manifold, aftermarket cylinder heads and a race cam to make power up that high in the rpms
@ellisjackson3355
Жыл бұрын
Rod to stroke ratio, rod to stroke ratio, rod to stroke ratio
@ellisjackson3355
Жыл бұрын
@@chrishansen7004 and valve springs, and rocker arm ratio
@_.incredible_magnum._291
Жыл бұрын
@@ellisjackson3355 haven't heard about rod to stroke ratio. But I do know I need heads, intake, cam and a forged crank
@Trendyrapslut
Жыл бұрын
what I would reccommend for your particular application is junking that ugly piece of shit and don't waste your money on a worthless piece of shit that's not going to be any more appealing or desirable by you burning cash . it's a fuckin low tech 4 door suv. how are you going to benefit? let it go.
@virus_officiel Жыл бұрын
thank you usualy shitty youtube recommendation for this gem.
@adrianrodriguez9246 Жыл бұрын
what engine is that??? that v8 sound glorius
@samday6621 Жыл бұрын
….more!
@maciekcichPOLAND Жыл бұрын
❤❤❤❤❤❤❤
@MaldonadoMoto Жыл бұрын
oh eyah
@lukebaines7785 Жыл бұрын
1:09 😍
@BIZON-507 Жыл бұрын
У меня сосед за стеной так же храпит !😀😂
@techh8662 Жыл бұрын
oh she is angry. ANGRY!
@freddiethorby4349 Жыл бұрын
Sounds like an angry bulldog 🐶
@John_cupra290 Жыл бұрын
Top end does sound wicked, but below that not so much.The engineering of the build looks beautiful though😮. Props on the cleanliness of your build 👍🤟
@beautyjuicynayx066 жыл бұрын
Good lord!
@CaptainInsano-go6vo Жыл бұрын
What kind of car is that???
@shawnmadden49664 жыл бұрын
would it be possible to pick you brain or get a 7k n/a rpm recipe from you. Ive done the pro-charger route and am not looking for out right speed but the driving experience and chance for a new style of engine build
@steelankles
4 жыл бұрын
This engine was really built for boost. I just remove turbo and change to NA cam. This engine was 4.030 bore and 3.25 stroke bringong it tp 331ci. TFS 11r cnc 205cc heads with custom na cam, 90 tb 1 3/4 lt headers 9.6cr. To make it a true na setup would have been better with bigger bore to 4.125 with 10.5cr. 190cc Heads may have helped too.
@zachheindl8619
4 жыл бұрын
Who did you have make the cam? What's the duration @ .050?
@zachheindl8619
4 жыл бұрын
Also what compression ratio NA?
@steelankles
4 жыл бұрын
cr was low due to setup for boost 9.6cr na i would made it 10.5. cam cant rember exacty 230/236 @.50 custom cams made it
@zachheindl8619
3 жыл бұрын
Do you remember what cam you had when boosted? Thanks.
@Sarge-R1 Жыл бұрын
manual ?
@noahsimmons4107 Жыл бұрын
MAMA MIA!!!!🥵🥵🥵🥵
@ALMIGHTYBUNGHOAL4 жыл бұрын
What mufflers are on this? I need them for my barracuda.
@steelankles
4 жыл бұрын
hooker maxflows
@FilipGereg
Жыл бұрын
@@steelankles hooker lol
@IsaacH69 Жыл бұрын
Car?
@judod97 Жыл бұрын
what car omfg
@bryans3287 Жыл бұрын
bored over 5.3l 327ci?
@anonamas4261 Жыл бұрын
Audi RS5 here 8200 rpm redline, but really dig that American V8 at 7000 rpm, loving your sound
@cellphonelightsaber
Жыл бұрын
No one expects 5.4L out of an engine that has smaller dimensions than a DOHC V6! Because the lifters, pushrods, and single cam sit inside the block, It keeps things really compact. The downside is, with all the moving mass and weight of the lifter/pushrod/rocker stuff it's impossible to get these things to really breathe without intense valvetrain refinement. Even 5k can be nothing but valve float and pain! All that said, here is a 5.8L Windsor in its natural habitat at LeMans: kzread.info/dash/bejne/dJ2t1s-FitTfmZs.html
@ENDRL321 Жыл бұрын
What car is this?
@bayernchris666
Жыл бұрын
TESLA😂
@AgentOtter710 Жыл бұрын
1:28 literally sounded like a pissed off hog on steroids
@SURF.LAND...6 ай бұрын
Musica pro's ouvidos😊
@zeus8928 Жыл бұрын
🇺🇸😈🏁
@TTMieleRationalWinterhalter Жыл бұрын
Baldystone tiers😂
@bbc_junior4863 Жыл бұрын
Kinda sounds like a ferrari f355
@alioral1358 Жыл бұрын
I reach 7000 rpm everyday as daily driving.
@allanmoreau91843 жыл бұрын
Little quirk for y'all: Right click on the play button and click on Loop. Can't stop.
@y.n.lreckless755 Жыл бұрын
Sounds like an ls
@mathisverloove7737 Жыл бұрын
You sound like Flash Mcqueen
@myusername3689 Жыл бұрын
1:06
@brianheim8439 Жыл бұрын
What a tease
@benwill17 жыл бұрын
What's it putting down now? 450-475HP?
@Ninja-gr1fj
5 жыл бұрын
Ben Williams bro it’s v8 at 7k probably over 800
@11dmills
5 жыл бұрын
@@Ninja-gr1fj no a 331 sbf even revving that high (which 7000 rpm for a sbf isn't really pushing it) wont push more than 650 n/a. now if it was boosted it would be a whole other ballgame.
@11dmills
5 жыл бұрын
@@Ninja-gr1fj Actually now that i look at if it, if you go through his channel he has a video of this car being dyno'd and it put down 378 at the wheels.
@cloroxbleach118
5 жыл бұрын
Ninja naturally aspirated? no you dumbass lol
@Larcona_
4 жыл бұрын
@@11dmills Yup, built from the ground up just over 600
@armcchargues86239 ай бұрын
With a 7400 rpm redline, you run out of room pretty fast. Seed a serious straight to really stretch its legs.
@NinjaZXRR Жыл бұрын
What is the car ? Is it the Camaro in the profile pic? I can’t tell from this angle lol
@gta6isstillcanceledsoz22
Жыл бұрын
Its a Ford. The description says its a 331
@glennsouthard9208 Жыл бұрын
When it sounds like crumpled up tin foil, shift.
@dennisyoung4631 Жыл бұрын
It wants an “X-pipe” to get that sound. The most flavorful variety…. No, check that. I think this one might have it. It has the *FORD* sound.
Пікірлер: 289
Props to the cameraman for holding steady.
@E4RLIES
Жыл бұрын
I wish I’d read this before attempting my own humour sorry mate🤓🤣🫣
@havik3420
Жыл бұрын
That's because he's stuck to the bottom of the car with really strong neodymium magnets
@IamIanOficial
Жыл бұрын
@@havik3420 r/whoosh
@3n3ly7m9
Жыл бұрын
@@IamIanOficial nah the camera man thing is getting old.
@garthinator2968
Жыл бұрын
😂😂😂
When you Upshift, It Snorts, when you downshift, it grunts, and when you let off, it spits fire! -Clarkson
@meemdoggoriginallongdrink
Жыл бұрын
Was that from Jaguar F-type review?
0:47 best brakes ever!!
@Crazyarnold12
4 жыл бұрын
Ha that’s funny
@bananaman2184
3 жыл бұрын
LOL
@steelankles
3 жыл бұрын
yep dang road racing brake pads lol
@jangabrielreyes4754
3 жыл бұрын
Imagine the g-force lol
@Mchacz8008
3 жыл бұрын
Instant-st-o-p-matic
There’s a point at 7000 rpm where an American v8 turns into a demon that sound it’s at about 6400 to 7000+ where it just screams and it is the greatest sound on this earth
@mrbrowneyes74
Жыл бұрын
the greatest sound on this earth?🤣😂🤣
@sagenbabin8786
Жыл бұрын
@@mrbrowneyes74 it is Yes I jus read this back me acting like there’s multiple earths 😂😂😂😂🤣😂😂
@lunytoonz3466
Жыл бұрын
Ah i see the No Man's Sky reference👌👍
@sagenbabin8786
Жыл бұрын
@@lunytoonz3466 yes exactly
@beauxr.benoit1374
Жыл бұрын
@@mrbrowneyes74 We have to live somewhere else before we can add anywhere else.
This and a 5 cylinder are some of the best sounds to ever come out of a vehicle
I find it insane that there's the smallest split second between shifts that there is literally no sound until the engine roars back into life like 1:09
@hooniganruiz5613
Жыл бұрын
The pause of the cylinders being filled with a bunch more fuel
@frostyl4269
Жыл бұрын
😩that is a GOOD noise.
@KidCoyle
Жыл бұрын
I love this. Been looking for a compilation of it for years now. Maybe I need to learn how to do it and make a vid haha
Kudos to the brave camera man for hanging on so we could all enjoy that 😊🙌🏼👍🏼👍🏼
@nxxxxxs
Жыл бұрын
ur so funny and original
@E4RLIES
Жыл бұрын
@@nxxxxxsalas no my friend. But I did post it before I saw the other similarly ‘hilarious’ comments🤓 Let’s all just be glad noises like this still exist 🤤
A pushrod sounds amazing at high rpm. Its a shame they don't come with a high redline from the factory
@AmilcarPenya1703
4 жыл бұрын
they sound good at any rpm!
@VicinalElk44104
4 жыл бұрын
Chevy 302 did. Those things could turn over 8k rpms from the factory like it was nothing. Seen a few of them run almost 9k rpms
@kelvinjones8650
4 жыл бұрын
No conventional American small block is going to turn over 8k from the factory reliably. I would put my bottom dollar that if you took a never opened 302 or 289 either would be torn up by the 3rd pass. Stock motors are normally terribly balanced from the factory due to the mass production. So if it’s not the balance I would guess the rod bolts would begin to back out by around 7k. And if not the rod bolts a valve would without question kiss a piston with the stock springs and timing set. So if you seen a 302 do that I would imagine they lied about their motor.
@robertelmo7736
4 жыл бұрын
@@kelvinjones8650 You are taking Ford and he is talking Chevy 302. Not sure about those 8-9k claims, but the DZ was a serious Vtec piece like the Boss 302.
@fredofarrell2455
3 жыл бұрын
Chevy 302 and mopar 340, short stroke big bore pushrod engines rev 7500-8000 rpm
Props for getting you audio recording not to distort / clip at those SPL.
@Mprikiman
9 ай бұрын
amazing camera mic to say the least... I am wondering what setttings he used.
The cameraman is so brave to hang off the back like that
@BM205
Жыл бұрын
Very brave! He was in a trailer behind the car
I could listen to this all day
@maciekcichPOLAND
Жыл бұрын
And all night
Sounds awesome mate. You've got a new subscriber.👍
@steelankles
3 жыл бұрын
thanks!! enjoy
It needs to have more likes! The sound is brillant!
idle sounds like the drum intro from hot for teacher
@Bigfr4nk
2 жыл бұрын
Mine sounds like the intro to down with the sickness
@Deano_77
Жыл бұрын
Exactly how it sounds
That sounds sick!!! Awesome video too
this vid makes ma calmer and excited at the same time
THAT. SOUNDS. AMAZING.
this is one the most beautiful things I have ever seen!
Beautiful music...
You're playing the music of my people!
What a beautiful sound! I cant say it often enough... E-mobility might be (a big part of) the future BUT NOTHING will ever replace gas/diesel engines!!!
That sounded delicious
This sound made my day 😊
Badass brother!!
THAT SOUNDS SO GLORIOUS
What on earth…. Gorgeous!
Pretty much exactly what my foxbody sounds like. Longtube headers, x-pipe, bullet mufflers and dumped by the rear end. Loudest car around and turns everyone's heads.
@lokitmg4123
Жыл бұрын
W
That thing sounds so good 😍🤤
DAMN that thing sounds awesome!
Now that's a beast
That literally sounds so good, it kinda reminds me of my foxbody
Sounds so so nice 👍🫶🏻💯
Beautiful ❤
Omg…. LUV IT!
@petemills81
Жыл бұрын
Never have I ever been so jealous
This v8 sound is music for me 😁
Que som absurdo de lindo!!
8,000+ is where the real fun is at
This is way to good
Holy moly 👌
good job on the tank
That is a healthy boy.
the sound of a small block cannot be beat.
This thing is like AAAAAAAAAAAAAAA .. ok let me breath a little.. AAAAAAAAAAAAAAA
Is that red thing we’re looking at a fuel pump?
The higher the better.
Who else thought this was an S197 Mustang until he went WOT?
Maaaaaan.....this video is a bigger tease then when my wife is in a teasing mood. 1st gear pull: whaAAAAAAAA! quick snap into 2nd: aaAAAAAAAAAAA! quick snap into 3rd: aAAA....burble-burble-burble-burble..... 😂 Brother, you need more open road for a part deux. 😁
Snarling
Alas, a lion reincarnated in metal visage. Careful brethren, for the siren is singing her song.
What microphone did you use?
The deceleration is f#cking awesome.
Cross Plane Crank V8 sound
I like explosions!
How much power did you make NA. Making a 331 11.5:1 compression hoping 7200 redline
My homie used to have a B7 RS5 that rev'd to 8500. Shit was fantastic. Prob on of the best sounding cars I've ever heard.
I gotta try this with my HEMI 😎
when v8s have displacement and a high pitch they sound very good. low too... i think i just like v8s
@Apollo5752353
Жыл бұрын
V8's are love, V8's are life
when you hear the feul pump going you know u fucked up
Sounds good!
🔝
I've come to pick your brain. I have a 98 durango with the 5.2 magnum. I wanna run it to at least 7100rpm. What would you recommend? The crank is 3.31 and bore is 3.91. I was thinking about boring it out to 4in and using 6.0 vortec flat top pistons for higher compression. What cam specs should I be running
@chrishansen7004
Жыл бұрын
You should be worrying more about the top end your really gonna need a really good short runner intake manifold, aftermarket cylinder heads and a race cam to make power up that high in the rpms
@ellisjackson3355
Жыл бұрын
Rod to stroke ratio, rod to stroke ratio, rod to stroke ratio
@ellisjackson3355
Жыл бұрын
@@chrishansen7004 and valve springs, and rocker arm ratio
@_.incredible_magnum._291
Жыл бұрын
@@ellisjackson3355 haven't heard about rod to stroke ratio. But I do know I need heads, intake, cam and a forged crank
@Trendyrapslut
Жыл бұрын
what I would reccommend for your particular application is junking that ugly piece of shit and don't waste your money on a worthless piece of shit that's not going to be any more appealing or desirable by you burning cash . it's a fuckin low tech 4 door suv. how are you going to benefit? let it go.
thank you usualy shitty youtube recommendation for this gem.
what engine is that??? that v8 sound glorius
….more!
❤❤❤❤❤❤❤
oh eyah
1:09 😍
У меня сосед за стеной так же храпит !😀😂
oh she is angry. ANGRY!
Sounds like an angry bulldog 🐶
Top end does sound wicked, but below that not so much.The engineering of the build looks beautiful though😮. Props on the cleanliness of your build 👍🤟
Good lord!
What kind of car is that???
would it be possible to pick you brain or get a 7k n/a rpm recipe from you. Ive done the pro-charger route and am not looking for out right speed but the driving experience and chance for a new style of engine build
@steelankles
4 жыл бұрын
This engine was really built for boost. I just remove turbo and change to NA cam. This engine was 4.030 bore and 3.25 stroke bringong it tp 331ci. TFS 11r cnc 205cc heads with custom na cam, 90 tb 1 3/4 lt headers 9.6cr. To make it a true na setup would have been better with bigger bore to 4.125 with 10.5cr. 190cc Heads may have helped too.
@zachheindl8619
4 жыл бұрын
Who did you have make the cam? What's the duration @ .050?
@zachheindl8619
4 жыл бұрын
Also what compression ratio NA?
@steelankles
4 жыл бұрын
cr was low due to setup for boost 9.6cr na i would made it 10.5. cam cant rember exacty 230/236 @.50 custom cams made it
@zachheindl8619
3 жыл бұрын
Do you remember what cam you had when boosted? Thanks.
manual ?
MAMA MIA!!!!🥵🥵🥵🥵
What mufflers are on this? I need them for my barracuda.
@steelankles
4 жыл бұрын
hooker maxflows
@FilipGereg
Жыл бұрын
@@steelankles hooker lol
Car?
what car omfg
bored over 5.3l 327ci?
Audi RS5 here 8200 rpm redline, but really dig that American V8 at 7000 rpm, loving your sound
@cellphonelightsaber
Жыл бұрын
No one expects 5.4L out of an engine that has smaller dimensions than a DOHC V6! Because the lifters, pushrods, and single cam sit inside the block, It keeps things really compact. The downside is, with all the moving mass and weight of the lifter/pushrod/rocker stuff it's impossible to get these things to really breathe without intense valvetrain refinement. Even 5k can be nothing but valve float and pain! All that said, here is a 5.8L Windsor in its natural habitat at LeMans: kzread.info/dash/bejne/dJ2t1s-FitTfmZs.html
What car is this?
@bayernchris666
Жыл бұрын
TESLA😂
1:28 literally sounded like a pissed off hog on steroids
Musica pro's ouvidos😊
🇺🇸😈🏁
Baldystone tiers😂
Kinda sounds like a ferrari f355
I reach 7000 rpm everyday as daily driving.
Little quirk for y'all: Right click on the play button and click on Loop. Can't stop.
Sounds like an ls
You sound like Flash Mcqueen
1:06
What a tease
What's it putting down now? 450-475HP?
@Ninja-gr1fj
5 жыл бұрын
Ben Williams bro it’s v8 at 7k probably over 800
@11dmills
5 жыл бұрын
@@Ninja-gr1fj no a 331 sbf even revving that high (which 7000 rpm for a sbf isn't really pushing it) wont push more than 650 n/a. now if it was boosted it would be a whole other ballgame.
@11dmills
5 жыл бұрын
@@Ninja-gr1fj Actually now that i look at if it, if you go through his channel he has a video of this car being dyno'd and it put down 378 at the wheels.
@cloroxbleach118
5 жыл бұрын
Ninja naturally aspirated? no you dumbass lol
@Larcona_
4 жыл бұрын
@@11dmills Yup, built from the ground up just over 600
With a 7400 rpm redline, you run out of room pretty fast. Seed a serious straight to really stretch its legs.
What is the car ? Is it the Camaro in the profile pic? I can’t tell from this angle lol
@gta6isstillcanceledsoz22
Жыл бұрын
Its a Ford. The description says its a 331
When it sounds like crumpled up tin foil, shift.
It wants an “X-pipe” to get that sound. The most flavorful variety…. No, check that. I think this one might have it. It has the *FORD* sound.
Jesus what is this thing
I heard, then i came