A collection of videos and photos of the full rebuild of Haines hunter V17c
Жүктеу.....
Пікірлер: 67
@funnystuff99988 ай бұрын
I've more respect for those that restore than those that buy new.
@reddysteddy219511 ай бұрын
Some top quality glass work, most refurbs are hard to watch when it comes to glassing but this was so impressive. Shes better than new now! Well done
@Clintonlando2 жыл бұрын
Best diy rebuild video I’ve seen! Inspired me to take on my seafarer Vsea thanks!!
@jmanjman6548
Жыл бұрын
Vsea are great boats too
@nobroko2 жыл бұрын
Great job mate mate. No corners cut and everything done right. Hats of to you re gel coating a boat and getting that finish is a lot of hard work. Impressive mate well done
@kiwiwifi2 жыл бұрын
Great rebuild video. For me, it validates the path I took to achieve a similar goal. My project was a 19 Ft Pelin Nomad Aquarius new build. 200 hours, plans for the build, a few sheets of marine ply, screws, primer, paint, and a sheet of Acrylic.
@vinpetrol65402 жыл бұрын
Mean as bro, built tough and will last for years to come!
@waterbourne9282 Жыл бұрын
Great eye for detail, a lot of work but well worth it and better than new. I had a V163C for 15 years or so which punched well above its weight but I'm told those 17's were the best of them so good choice and nice to see one have another lease on life.
@chookchook56002 жыл бұрын
Well done. Bloody good job. Luv the music, need a beer now
@trevhedges2 жыл бұрын
That thing will be bulletproof! Well done!
@noggurevoli2 жыл бұрын
Very, very big and professional work! Bravo!!! 👏👏👏 Best regards from Russia!
@peterpapadimitriou77448 ай бұрын
Love it from chain saw to masterpiece ❤
@capegloucesteradv32502 жыл бұрын
well done. so much hard work gone into it, now it's time to enjoy it.
@philbell6604 ай бұрын
Epic effort, looks mint!
@fixingtogofishing2 жыл бұрын
Best diy build I’ve seen!!!
@damonleigh60458 ай бұрын
Absolutely beautiful rebuild mate, well done!
@robintaurima8257 Жыл бұрын
What a beautiful job mate, well done, another old haines restored. From new zealand. 👍
@25hpboatracerman2 жыл бұрын
Well done mate 👍 looks perfect 👌 Good way for people to see what a 500hrs plus rebuild takes. You should be very proud of your efforts and it is awesome knowing the hull is rebuilt the way you like. 👍👍👍👍
@adventuresofvikilu1028
2 жыл бұрын
Thanks mate yeh 500 hours is probably cutting it a bit short but yeh I’m happy how it came up it’s my first rebuild so definitely learned a few things along the way
@25hpboatracerman
2 жыл бұрын
@@adventuresofvikilu1028 Yeah, I’m sure if you kept a log on hours it would be scary. I’m doing a full rebuild on a little Haines seawasp at the moment with thermo and vinylester, that will probably end up at 400hrs 😂. It’s ok, it’s for me. Well done again on your efforts mate, looks awesome 👍
@mrpuncho24762 жыл бұрын
Great build and editing was awesome thanks for making my my morning more positive
@austinharrison65262 жыл бұрын
Epic build mate. You did one hell of a restoration. Guys like you are the reason I keep my Haines knowing that one day the rebuild will be worth it. Would love to see this on the water, bet it flies with the new 150 merc!
@adventuresofvikilu1028
2 жыл бұрын
Thanks mate yeh the 150 goes good real happy both performance and fuel economy
@Do-iz6qd2 жыл бұрын
You've done a bloody fantastic job mate...you should be really proud of yourself, especially in such a confined space..
@lukeozdigger57302 жыл бұрын
Great job on the fiberglass and sticking to it’ huge job’ but you pulled it off well!
@Micington2 жыл бұрын
Solid build! Nice work mate!
@TLaneyful2 жыл бұрын
Outstanding workmanship!!!
@luke0b7082 жыл бұрын
I'm about to start my 17c. This is my inspiration!
@adventuresofvikilu1028
2 жыл бұрын
Nice post some pics of it when you start
@sanmiguel56982 жыл бұрын
Looks great, what an enormous undertaking. Also love the sunglasses on the head whilst using a chainsaw on fibreglass. haha
@rockcityfpv91172 жыл бұрын
EPIC!! Not a lick of wood in that boat
@thebayslayer12 жыл бұрын
that's a quality transformation mate you got skills 👌
@adventuresofvikilu1028
2 жыл бұрын
Thanks mate
@duncsnat58842 жыл бұрын
That's an awesome job!
@johnnyrotton892 жыл бұрын
So epic. Love the colours.
@brettbrown10362 жыл бұрын
Done yourself poud, very nice work.
@judyfisk96572 жыл бұрын
Well done you earnt every part of the boat
@55commodore Жыл бұрын
When they dig it up in 5000 years from now, the transom will be the only sign left that it was a boat.
@tobesone89002 жыл бұрын
epic rebuild!
@Littlemobcraft2 жыл бұрын
Love it
@Fluid362 жыл бұрын
Great job champ
@auswidemarine89802 жыл бұрын
Well done. Good job.
@reconnaissance7372 Жыл бұрын
If I ever do this shorts is out of the window haha. I feel like I'll be itching for a straight year working on a boat.
@tairua12 жыл бұрын
Exceptional.
@levicoombs54882 жыл бұрын
Fuck mate this is unreal good job looks so sick
@AM-ni3sz8 ай бұрын
Nice
@dashdonald4912 жыл бұрын
Epic job man🤙🏽🤙🏽 is that paint or gel coat that you were spraying
@adventuresofvikilu1028
2 жыл бұрын
Cheers mate it was gelcoat
@maxbomb1012 жыл бұрын
awesome mate this gives me motivation to get my skimmer craft finished, i live in kippa ring..so where did you buy your gear? Coosa board, resin and matting etc etc? you got a new subby
@adventuresofvikilu1028
2 жыл бұрын
I got it all through Moreton bay marine services at Clontarf Mitch was awesome to deal with
@maxbomb101
2 жыл бұрын
@@adventuresofvikilu1028 cheers for that yeah i know of Mitch top fella,,,btw keep up the vids mate
@Diegolasca.847 ай бұрын
How long did it take you to restore this projects. Thank you for the great video
@stewatparkpark2933
6 ай бұрын
Budget 3 years minimum .
@geoffstein38962 жыл бұрын
This is awesome! I read it was your first rebuild, how did you know what to do? I have an old Savage Escort and I wouldn't even know where to start. Thanks
@adventuresofvikilu1028
2 жыл бұрын
I done a lot of research before hand Also spoke to some boat builders for advice and I’m a chippy by trade so it was a good help.
@geoffstein3896
2 жыл бұрын
@@adventuresofvikilu1028 nice mate... Knowing boat builders would be nice. I have a weird pod style type transom on mine not a straight one so I'm already up against it.
@TonyDFreestyle962 жыл бұрын
Awesome build!!! Did you use polyester for the stringers and trandom or epoxy? Big debate.. trying to decide what route i will take...
@adventuresofvikilu1028
2 жыл бұрын
Yeh everything polyester
@TonyDFreestyle96
2 жыл бұрын
@@adventuresofvikilu1028 right on! Basic Boatyard or vinyl ester?
@klinno87192 жыл бұрын
Epoxy or poly mate?
@adventuresofvikilu1028
2 жыл бұрын
Polyester
@klinno8719
2 жыл бұрын
Thanks mate best rebuild and filming ever, did you gel coat the whole thing?
@adventuresofvikilu1028
2 жыл бұрын
@@klinno8719 yeh all gelcoat outside and flowcoat inside
Пікірлер: 67
I've more respect for those that restore than those that buy new.
Some top quality glass work, most refurbs are hard to watch when it comes to glassing but this was so impressive. Shes better than new now! Well done
Best diy rebuild video I’ve seen! Inspired me to take on my seafarer Vsea thanks!!
@jmanjman6548
Жыл бұрын
Vsea are great boats too
Great job mate mate. No corners cut and everything done right. Hats of to you re gel coating a boat and getting that finish is a lot of hard work. Impressive mate well done
Great rebuild video. For me, it validates the path I took to achieve a similar goal. My project was a 19 Ft Pelin Nomad Aquarius new build. 200 hours, plans for the build, a few sheets of marine ply, screws, primer, paint, and a sheet of Acrylic.
Mean as bro, built tough and will last for years to come!
Great eye for detail, a lot of work but well worth it and better than new. I had a V163C for 15 years or so which punched well above its weight but I'm told those 17's were the best of them so good choice and nice to see one have another lease on life.
Well done. Bloody good job. Luv the music, need a beer now
That thing will be bulletproof! Well done!
Very, very big and professional work! Bravo!!! 👏👏👏 Best regards from Russia!
Love it from chain saw to masterpiece ❤
well done. so much hard work gone into it, now it's time to enjoy it.
Epic effort, looks mint!
Best diy build I’ve seen!!!
Absolutely beautiful rebuild mate, well done!
What a beautiful job mate, well done, another old haines restored. From new zealand. 👍
Well done mate 👍 looks perfect 👌 Good way for people to see what a 500hrs plus rebuild takes. You should be very proud of your efforts and it is awesome knowing the hull is rebuilt the way you like. 👍👍👍👍
@adventuresofvikilu1028
2 жыл бұрын
Thanks mate yeh 500 hours is probably cutting it a bit short but yeh I’m happy how it came up it’s my first rebuild so definitely learned a few things along the way
@25hpboatracerman
2 жыл бұрын
@@adventuresofvikilu1028 Yeah, I’m sure if you kept a log on hours it would be scary. I’m doing a full rebuild on a little Haines seawasp at the moment with thermo and vinylester, that will probably end up at 400hrs 😂. It’s ok, it’s for me. Well done again on your efforts mate, looks awesome 👍
Great build and editing was awesome thanks for making my my morning more positive
Epic build mate. You did one hell of a restoration. Guys like you are the reason I keep my Haines knowing that one day the rebuild will be worth it. Would love to see this on the water, bet it flies with the new 150 merc!
@adventuresofvikilu1028
2 жыл бұрын
Thanks mate yeh the 150 goes good real happy both performance and fuel economy
You've done a bloody fantastic job mate...you should be really proud of yourself, especially in such a confined space..
Great job on the fiberglass and sticking to it’ huge job’ but you pulled it off well!
Solid build! Nice work mate!
Outstanding workmanship!!!
I'm about to start my 17c. This is my inspiration!
@adventuresofvikilu1028
2 жыл бұрын
Nice post some pics of it when you start
Looks great, what an enormous undertaking. Also love the sunglasses on the head whilst using a chainsaw on fibreglass. haha
EPIC!! Not a lick of wood in that boat
that's a quality transformation mate you got skills 👌
@adventuresofvikilu1028
2 жыл бұрын
Thanks mate
That's an awesome job!
So epic. Love the colours.
Done yourself poud, very nice work.
Well done you earnt every part of the boat
When they dig it up in 5000 years from now, the transom will be the only sign left that it was a boat.
epic rebuild!
Love it
Great job champ
Well done. Good job.
If I ever do this shorts is out of the window haha. I feel like I'll be itching for a straight year working on a boat.
Exceptional.
Fuck mate this is unreal good job looks so sick
Nice
Epic job man🤙🏽🤙🏽 is that paint or gel coat that you were spraying
@adventuresofvikilu1028
2 жыл бұрын
Cheers mate it was gelcoat
awesome mate this gives me motivation to get my skimmer craft finished, i live in kippa ring..so where did you buy your gear? Coosa board, resin and matting etc etc? you got a new subby
@adventuresofvikilu1028
2 жыл бұрын
I got it all through Moreton bay marine services at Clontarf Mitch was awesome to deal with
@maxbomb101
2 жыл бұрын
@@adventuresofvikilu1028 cheers for that yeah i know of Mitch top fella,,,btw keep up the vids mate
How long did it take you to restore this projects. Thank you for the great video
@stewatparkpark2933
6 ай бұрын
Budget 3 years minimum .
This is awesome! I read it was your first rebuild, how did you know what to do? I have an old Savage Escort and I wouldn't even know where to start. Thanks
@adventuresofvikilu1028
2 жыл бұрын
I done a lot of research before hand Also spoke to some boat builders for advice and I’m a chippy by trade so it was a good help.
@geoffstein3896
2 жыл бұрын
@@adventuresofvikilu1028 nice mate... Knowing boat builders would be nice. I have a weird pod style type transom on mine not a straight one so I'm already up against it.
Awesome build!!! Did you use polyester for the stringers and trandom or epoxy? Big debate.. trying to decide what route i will take...
@adventuresofvikilu1028
2 жыл бұрын
Yeh everything polyester
@TonyDFreestyle96
2 жыл бұрын
@@adventuresofvikilu1028 right on! Basic Boatyard or vinyl ester?
Epoxy or poly mate?
@adventuresofvikilu1028
2 жыл бұрын
Polyester
@klinno8719
2 жыл бұрын
Thanks mate best rebuild and filming ever, did you gel coat the whole thing?
@adventuresofvikilu1028
2 жыл бұрын
@@klinno8719 yeh all gelcoat outside and flowcoat inside
@klinno8719
2 жыл бұрын
Your a machine, love your work
Is it for sale? 😂
My throat it’s dry and sore.