What I absolutely love about this video Anthony is the fact that clean AF OEM+ goals are simply achievable even with a modest budget that will definitely look great until you can drop the big bucks on big brakes! Thank you for your contribution to the community to show anything is possible with minimal effort. Anyways man, great series thus far!

@ALLDAYANTHONY

Жыл бұрын

I appreciate that!

@nomad509

Жыл бұрын

@@ALLDAYANTHONY my goodness... I should have proofread that before submitting but by my guess you got what I meant! It was a long day at work and was enjoying a delicious Wallace Idaho Vindicator while watching! Hopefully this is the last of the snow in our region and the detailing season is here soon!

Hey Anthony! I love this build so far! The attention to detail is great! You are definitely inspiring me to do my own things to my FG1!

@ALLDAYANTHONY

Жыл бұрын

Thanks man! I hope you do some cool things to it!

I rarely take time to write a comment, but man do your videos make my day, I too am a ocd enthusiast and Honda lover Thank you for taking the time to make these videos, hard work really pays off, and you can tell how much work you put in your videos. Thank you

As the journeyman I trained under always told me I will now tell you.. "your hand is not a hammer" protect them hands brother!

I used the same caliper paint on my car. It has really held up even after a year. I love that grease and dirt just slides off of it. The only downside is that the paint dries up even with the can sealed tight.

Yesss another video! Can’t wait to see this build complete!

@ALLDAYANTHONY

Жыл бұрын

It’s getting there, slowly but surely

Very much enjoying the progress on the RSX, Anthony.

Love this video. Brings me back when I did the same setup but the sport pads. Lasted so long and literally little to no brake dust. Wish I did the rears as well. I personally love the silver caliper look. But the black goes so well with your car.

So you're all "K" anthony now 😂 0:01

@ALLDAYANTHONY

Жыл бұрын

Haha just for the RSX videos :)

Always good to start off a night with an ADA video!!!!😁😁

@ALLDAYANTHONY

Жыл бұрын

Thanks for watching man!

I love these types of vids! Now for that civic rear disc conversion Anthony!

@ALLDAYANTHONY

Жыл бұрын

Thanks man. That’ll hopefully be done this year. But who knows at this rate lol

Been watching your videos for years and you always do a great job of being detailed in explaining everything. I’m an EVO guy but wouldn’t mind doing an RSX OEM+ build. Such a great platform.

Look great. Nice slotted rotors. Black paint sweet.

I think that this paint works a lot better for a floating caliper setup. When I used it for my brembos it ended up leaving a lot of brush strokes and was pretty frustrating. You also have to be careful as it dries on things VERY well and can be difficult to remove. Wear gloves.

Big fan of all your work!

@ALLDAYANTHONY

Жыл бұрын

Thanks dude! Appreciate you watching

Thanks for sharing this video Anthony. I just ordered a G2 custom color of velocity blue for my Mustang. Hoping my calipers will turn out as well as yours did.

dude i've had all notifications on for your channel since i subbed and i still probably get them only a quarter of the time. you're literally the only channel that i have experienced issues like this before, idk what's goin on.

@ALLDAYANTHONY

Жыл бұрын

Weird! But thanks for letting me know. Hope it’s not happening to others

The info about the spline was really helpful. I was thinking I installed mine wrong but found out mine are just staright splines

@ALLDAYANTHONY

Жыл бұрын

Yep it’s all personal preference if they are straight splines

Impact screwdrivers are life savers.

Looks good! I suppose if it's still on stands, you could refresh the muffler with some new high temp black paint. I had a Ktuned catback system but went back to the OEM system but repainted the muffler and polished the tip.

@ALLDAYANTHONY

Жыл бұрын

I have something planned for the exhaust!

You think I can’t tell you are saying all K Anthony? I get it you got a K series! 😂❤

Enjoying this videos bro. I have this upgrade on the list. just need a 2nd car and a garage to do it lol

Literally doing all the same things to my recent 06 type s acquisition. New headlights ordered, it’s in PDR now and then off to have the front Resprayed and installing a double din this week, brakes next week lol. 06 with 180k too but my floor mats were covered their whole lives so they look new

@ALLDAYANTHONY

Жыл бұрын

That’s awesome man! You doing the right process

Brilliant KZread thanks bro

Dude I love your videos man. Keep bringing the killer content! Also, you ever want to go b series in the civic .. you let me know 😂 I’ll drive my happy butt up there to good ol Idaho, and we’ll swap it in a day!👌🏻

ive been following your build every time! but just a quick question, where you get your mud flaps from? i wanna get a set for my DC5

I’ll be curious to see how the G2 paint holds up for you. I used it on my calipers and it chipped in several places after less than 6 months, and it discolored (red paint turned black) in a few spots on my calipers. The discoloration did happen at a track day so I guess I managed to get the calipers hot enough to burn the paint..

Great Video! I was thinking of getting the G2 caliper paint, but I saw in the reviews that it got tough to work with as the painting went on and by the end, the hardener was almost impossible to go on smooth - what was your experience? Did brush on easy the whole time? Looked great in the video, how has it held up over the last year. Thanks for great video.

Just so you know, you don’t need those rotor screws. All those do is hold the caliper in place when you take the brakes off other than that whenever you take the wheel off the brakes will keep it in place.

Just used the G2 paint my car last weekend before this video lmao i ended up loving it, i used red on my 335i and it looks great so far. Well worth it until I can get a real brake kit on there

I GOTTA SAY THAT THUMBNAIL IS A GREAT PICTURE TO START THE VIDEO THAT G·2 PAINT LOOKS GOOD TEMPTING I'D EVEN THOUGH I'VE THOUGHT OF "BLACK POWDER COAT" FOR CALIPERS, FORK & KNUCKLE ARM DO TO MY NEIGHBOR ACROSS MY STREET WORKS AT A SHOP DOING THAT IS CONVINCING ME TO DO IT BY THE LOOK THIS G·2 PAINT AS WELL I CAME OUT REALLY GOOD CAN'T WAIT TO SEE THE NEXT VIDEO SURE IT'S WITH YOO HOME·BOY JASON CAUSE THAT'S BEEN THE HOME·BOY THAT ASSISTS WITH COILOVERS YOU BOTH BANG OUT A GREAT GOOD PLUS FOR THE PRICES OF THAT PAINT THEY SHOULD ADD SOME CHEESY JOKES LIKE THE POPSICLE I'M EATING RIGHT THANKS ANTHONY CAN'T WAIT FOR THE NEXT VIDEO ✌🏼OUT POPSICLE JOKE: HOW DOES THE OCEAN GREET THE BEACH ?? " IT WAVES "

@ALLDAYANTHONY

Жыл бұрын

I think you’ll be happy with the next video Noah :)

@NOAHCASAS

Жыл бұрын

@@ALLDAYANTHONY WILL BE HERE WAITING MAN 🤟🏽

Been thinking to upgrade my RSX too with Wilwoods

@ALLDAYANTHONY

Жыл бұрын

Wilwoods are great!!

@kibawhitefang7176

Жыл бұрын

@@ALLDAYANTHONY They are lighter than Brembos and they come with an adapter, with Brembos sincw they don’t come exactly for the RSX other than the Integra DC5, people make modifications around the hub and such methods are irreversible. So you’re better off with Wilwoods especially if your wheels are 17”.

I think the rotors are installed backwards the passenger side rotors are on the driver side and the driver side rotors are on the passenger. Look at the direction the slot rotate.

Looks great! Was that OPC you used to clean?

@ALLDAYANTHONY

Жыл бұрын

You know it!

Rear disc conversion for the red civic!

Paint me impressed looool!

@ALLDAYANTHONY

Жыл бұрын

It turned out great!!!

I just had the shop (couldn't get the screws in the rotors out) install the EBC USR rotors front and back, new stainless lines and Stop Tech Street Touring pads and I'm trying to figure out what is wrong. Car has been bled twice, but there is zero bite. It slows down slowly, can't make it do anything even close to stock. Shop believes the pads are junk, as did the alignment shop (installed the RCA balljoints, sway bar endlinks and rear trailing arm bushings as well). So, ordered some Project Mu B Force/Spec pads... hopefully this fixes things because it has been super disappointing.

The music reminds me of breath of fire 3. Sick video nevertheless, very relaxing.

@ALLDAYANTHONY

Жыл бұрын

Haha thanks man. Glad you liked it!

Finally!!!!

@ALLDAYANTHONY

Жыл бұрын

Thanks for showing up early ❤️

The rotors are one backwards I'm pretty sure. When I did my brakes for my E46, the slots in the rotors are supposed to point forward, not backwards. Also, slotted rotors DO NOT decrease stopping distance. They help with temperatures slightly, but they are really meant to help combat brake glazing.

@mando4660

7 ай бұрын

They are pointing forward

Good work Anthony but I suggest it’s better the color of calipers is silver..

Pretty soothing to watch u paint 👍. Start a new painting channel with this wonderful serene music👍

For coilovers I’ve always think of _Fortune Auto_

@ALLDAYANTHONY

Жыл бұрын

Fortune makes great stuff, have several friends running their coils

@kibawhitefang7176

Жыл бұрын

@@ALLDAYANTHONY That’s where I’ll go with, they use it on competition & time attack. Get the _500_ one for street use. Can’t recommend them more than enough.

I was sus about the g2 caliper paint. This video just changed my mind.

Can you use a paint gun for that paint?

question, bought a pristine White type s for 11,500$ for 90k miles(body) clean title BUT is has 11k+$ worth of maintenance done including a brand new k20a2 block with semi built engine (forge pistons/rings, Manley rods and cartel 3.2 cams) and tuned everything else is completely stock. also included with hondata k pro interior looks like brand new all done at 75k miles was it worth it? makes 216hp and 155tq(conservative tune) original keys and window sticker included my question is, was it worth it? all done by K Powered in North Palm Springs , Ca

@ALLDAYANTHONY

Жыл бұрын

I would say so! Mods don’t necessarily always add value but if the miles are low and the car is in good shape that’s all that matters!

Don't you need to remove the master cylinder cap before the caliper comes off?

@ALLDAYANTHONY

Жыл бұрын

Nope. Not unless you’re removing the brake lines and having to re-bleed

stainless steel brake lines would make this setup 100% perfect

@kikigem2952

7 ай бұрын

Yeah but that changes everything and you have to break open the system

I am going to do this on my 02 type s. My question is why the G2 Paint oppose to a Dupli-Color caliper paint? I need to order paint and your input would be appreciated. Ordering today or tomorrow. Anyone else have good history with spray caliper paint for our cars?

@ALLDAYANTHONY

7 ай бұрын

G2 seems to be substantially more durable. I’ve used the duplicolor stuff before and this formula is for sure different

@MrDIJEN15

7 ай бұрын

@@ALLDAYANTHONY I just feel it’s way more tedious than spray paint. But my real question is how long more does it last than spray paint. Also why didn’t you do a gloss clear coat?

Great looking but slots will not decrease braking distance. You need a big brake kit to reduce braking distance.

@iDatedMyPizza

Жыл бұрын

upgraded brakes dont decrease braking distance. tires do

@dougritter429

Жыл бұрын

@@iDatedMyPizza bigger rotors & bigger calipers & bigger pads will reduce distance.

“Nice deep dark and black” that’s what she said 😂😂😂😂

Stay tuned for next week when he drives 3 hrs to come replace the brakes on my civic 😂😂😂

need to get a gt86

@ALLDAYANTHONY

Жыл бұрын

Maybe someday!

I cant be the only one hearing allkayanthony in the intro

The backstory to this video makes me want to buy anthony a beer. Or maybe a bar.

@ALLDAYANTHONY

Жыл бұрын

Thanks David, I need one. Lol

@Dcervantes243

Жыл бұрын

@@ALLDAYANTHONY perhaps in chicago.

Any one else hear all k Anthony in the intro 😂😂😂😂

It does matter 🤦🏽🤦🏽🤦🏽 there directional for cooling and there legitimately made to go one way

Going K all day or least untill the video ends 😢

Damn, last time I was this early my girlfriend left me

@ALLDAYANTHONY

Жыл бұрын

Based on your avatar photo, you’re gonna love this video.

Am I trippin or is the paint slightly but I mean slightly blue

@ALLDAYANTHONY

Жыл бұрын

Probably just the lighting. It’s definitely black black lol

1st

@ALLDAYANTHONY

Жыл бұрын

Verified first!

@randalfuentes6953

Жыл бұрын

@@ALLDAYANTHONY thank you, I love your videos, I'm not a Honda guy, but your videos have that "home" feeling. Keep them up bro!!

I did not like the G2 paint. Paint felt super runny and took forever to cover my brembos.

@ALLDAYANTHONY

Жыл бұрын

Interesting, I felt that it stuck almost immediately. Could be because the Brembos have a lack of texture in comparison to nissins

Also heads up, u dont have to open the cap when u compress the piston. Ur not adding any fluid or anything

@ALLDAYANTHONY

Жыл бұрын

Opening the cap allows the piston to full compress without putting pressure in the reservoir. I actually had to remove a good amount of fluid after the job was done!

Yo about to do mine , same design as your calipers . Anything I should not paint that would screw up the pads going in?

JDM ONLY PLS.

ALLKAYANTHONY