Great solution. I thought I addressed my high temp issues, but as soon as we had a few warmer days, its back to the drawing board. Trial and error is absolutely what this is.

@TheHobbyistMiner

3 ай бұрын

Trial and Error my Friend! Same!

Loved this! As summer approaches, heat is an issue again. Especially if you've added to your farm since last summer. I've been trying to figure out how to cool the garage this summer, now that I have another 13 card rig there. The garage door has those windows at the top, and I've considered building custom inserts for them. Something that would allow me to "open" the window and put a fan in front of it. Those little 8" infinity fans would work perfectly.

@TheHobbyistMiner

3 ай бұрын

Heck yeah Goodluck! Stop in the discord, we have a mining Shed section. Maybe helpful!

Anxious to see what you work out for to power costs. MetEd just applied for a rate increase so when they get that it's gonna make it harder to find cheaper supply side.

I see a shed video I press play at 600mph

Good video. You are absolutely right, its a lot of trial and error. What is the difference of your intake temps at the ASICs vs exhaust temps at the exhaust fans before and after the ridge fans? That is the metric that matters the most to gauge if the ridge exhaust is helping and if they will be enough. You could very well just be sucking out the heat in the ridge area but still mixing too much hot air with the intake air. I understand you need content and this shed journey make for great content but I still think your best best is putting in a ceiling and creating a hot/cold isle. There is a reason the large farms/hosting facilities use hot/cold isles. The solution scales down to our mining sheds as well.

Thank you for the inspiration! I have a project that I am about to undertake. My plan to deal with heat (In TEXAS) is to Utilized a Leanto foot print along with a cold(Intake) and Hot (Out dlow) partition on the inside. Keep the videos coming

@TheHobbyistMiner

3 ай бұрын

Great Idea. You should have no issues with Texas Heat, As long as you have loads of airflow that is recycling the air in and out quickly.

Those fans at the top of the shed was a great idea keep it up 👍

@TheHobbyistMiner

3 ай бұрын

Thanks 👍

Hi Just subscribed what kind of computer would you recommend? any specific specs?

Hey gave this advice to my mining buddy also with asics. Home depot just released these pretty large high CFM EVape coolers from pretty small to large. No condensation and throw 1 or 2 of them in the corners and i think we should be good during these summer heats having them run. i am throwing my first s19k pro into my shed soon and going to throw one of these in my shed to start instead of the split unit i was previously going to add.

Awesome video, good solution, did you plan to put some solar panel on top of your shed to reduce electricity cost during the day ?

Excellent work friend! The outside apex looks like a real good spot to mount a Weather Xm or Fry Weather Station. Awesome job. 🙏

@TheHobbyistMiner

3 ай бұрын

Thank you. That is my Electricans. I am looking to buy one and put it at my house next to my Helium 5G Radio. About 40Ft up lol.

I thought you may run two ducts from two of the exhaust fans up to the ceiling to draw that heat out. Where do you host. Or where would you host if you didn't get a discounted rate from a partner?

had an outage here and the pdu didnt protect the lone iceriver ks1 on it. so one hashboard only has 4 chips of the 18 that work. the other was fine.. does btminer fix ks1 hashboards?

@TheHobbyistMiner

3 ай бұрын

I believe so!

07:05 Holy Black Mold batman. I'd let it get to 185 to kill that. lol

@TheHobbyistMiner

3 ай бұрын

No Black Mold. Are you looking at the peak? That's just in the dark? No light.

@TheMiningCabinet

3 ай бұрын

@@TheHobbyistMiner that's good. Leaks are no fun on old sheds

No cameras on all 4 sides? I'd just unscrew the venting and crawl thru the side :) Add in a motion detector inside; maybe motion detector near shed as well.

@TheHobbyistMiner

3 ай бұрын

I have a Camera Inside. Security System to be added here soon.

😊

Too much negative pressure had the same problem with my paintbooth had a hard time with painting cars

@TheHobbyistMiner

3 ай бұрын

I do also have the options to FLIP these Inline Fans and that would bring in another 1600 CFM. Right now I am only using passive intake.

Why don't you have any roof vents to allow hot air to escape? Maybe some vents in the roof allowing the heat to just escape up and out would have worked and you wouldn't have had to buy those $199 fans and the power everyday to run them. Just wondered why no roof vents.

@TheHobbyistMiner

3 ай бұрын

I talked about the roof vents in the video. Because of the negative pressure, they would act as intakes, not exhaust. Good thought!

I have a question, all the money you spent for these solution then redo it/change it again, isnt it eating you profitability?

@TheHobbyistMiner

3 ай бұрын

Nothing is Problematic right now. So not affecting my Profitability. I am looking ahead. If we move forward with a 400amp service will be overhauling the shed entirely.

Dang brother seem like a lot extra work and money when you could have had the asic exhausting to the outside instead of having fans suck out the hot air

How’s your DG1 doing?

@TheHobbyistMiner

3 ай бұрын

Running Great! Been on since I recorded the video

@chb2live

3 ай бұрын

Are you willing to sell any of your used equipment ​@@TheHobbyistMiner

Are you willing to sell any of your used equipment

@TheHobbyistMiner

3 ай бұрын

I list my equipment for sale in my discord, under the "Hobbyist Yard Sale" Section

@chb2live

3 ай бұрын

@@TheHobbyistMiner 😎 I'll look

Hello, I'm a newbie_ in crypto. I have invested in a few coins but need help. Please, can you guide me through on how to profit on it.

What is the best_ way to make money from crypto investment as crypto is turning around massively.?