Same model LED bulbs as you suggested came in from Amazon a few days ago. Getting anxious to install, just waiting for a weekend with a break in the rain. Thanks for the video, my head was spinning researching options for something better than the dim stock halogens on my Jeep. Watched your video about 4 times in anticipation.

@myblujl7503

2 жыл бұрын

Awesome! Read below what some users said about the o ring. Also as I said in my video, be sure to aim them so you dont blind people. These things are super bright! Glad it was helpful.

@travisevans531

2 жыл бұрын

@@myblujl7503 Thanks for the heads up, in my case the Hikari bulbs had the exact same configuration and O ring as the halogens. I was able to simply swap them out like for like. Checked the beam cutoff height before and after, ended up exactly the same, I got lucky. These lights are amazing, thanks again!

Sir, have you looked at a Headlight Revolution? They test and report on all sorts light brands. Full replacements include KC Highlights Gravity type (they are not cheap), Oracle, and Morimoto. And others.

Changed these today. I did have to remove the o ring off of the new leds and just used the original o ring. Works great and thanks again. Any suggestions on fog light led upgrade?

@myblujl7503

2 жыл бұрын

I have not done anything with the fog lights. They are not used much and just so insignificant, I wont even bother. You really DONT want a bright fog light since it will just blind you anyways unless its properly aimed down low.

Another awesome video. Great job. I’ll be sure to point this video out to others.

@myblujl7503

4 жыл бұрын

Thanks! I think you have the nice LED mopar kit on yours? Those things are amazing and im really jealous.

Thank you for this! Upgrading mine next week. Yours still going strong?

@myblujl7503

2 жыл бұрын

So far after a year, yes! Things are going very well! Still strong and no issues. Make sure to aim your new headlights properly!

When you took out the halogen bulb the original red rubber gasket was still stuck on. When you installed the LED bulb it had it's own red gasket. Now you have two red gaskets installed on top of each other.

@myblujl7503

4 жыл бұрын

Thanks for the heads up. I will check it out.

@RyanRij

4 жыл бұрын

@@myblujl7503 You're welcome. I only noticed because I did the same thing on mine. 😂 Great videos!

Awesome review

So I'm just stopping back to see how's your LED headlights are doing still as I like to get a set Thx

@myblujl7503

3 жыл бұрын

Very well! The night time is so much better with the LED's, and since I aligned them, I dont need to worry about blinding people. The one thing I was concerned for was the heat fan noise, and its a non-issue. I can only hear the fans when im outside the vehicle after I parked and before the lights turn off automatically. Best money so far.

@robl6044

3 жыл бұрын

@@myblujl7503 ok thx for that and how's your jeep doing looking forward to your next video 👍

@myblujl7503

3 жыл бұрын

@@robl6044 Thanks. I have a few video's planned, but things got super busy on my side.

Did you receive any error codes on the dash switching from Halogen to LED ? Do you know if there is a decoder that comes with it if you did not receive a error. Thank You!

@myblujl7503

3 жыл бұрын

No error code. When buying your headlights, you need to make sure to look for one with that electronic balast. That makes the LED headlights look like normal for the onboard computer by using similar power draw. So right now my Jeep thinks is just normal Halogen headlights.

Hey your audio during voice overs is very good. What kind of mic did you use?

@myblujl7503

4 жыл бұрын

I use the mic in a Logitech web camera for VO. Thinking about getting something better if I get a few more subs. I have a big episode coming up soon, so look forward to it!

@CheaperJeeperTV

4 жыл бұрын

MyBluJL will do.