Thank you, bro. This is my first undervolt, and I only used the exact settings that you recommended, and the results are amazing. My GPU used to reach temperatures between 77 and 80 degrees at 100% usage, but with this undervolt, it now reaches a maximum of 70 degrees (most of the time it's around 68 or 69) at the same 100% usage. My GPU is an RTX 3060 Twin Edge Zotac with 12GB of DDR6. Note: More stability and no less performance.

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@parallelblox6822

11 ай бұрын

how much of an increase in fps did you have?

@TREVAA

11 ай бұрын

How much fps?

@Ryrynz2000

10 ай бұрын

@@TREVAA we'll never know

@immaxx9533

10 ай бұрын

​@charlesbrooks8616 didn't he say you will gain fps? and by acquiring general knowledge of undervolting I deducted you gain fps, isn't that right?

Thank you! I did this and a custom fan curve which increased my performance, decreased temperature by around 10 degrees Celsius, and decreased volume of my fans. Great video

@ImWateringPSUs

4 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

Following these steps reduced my gpu temp from 87 to 62 degrees under load without any significant performance loss. Absolutely amazing thank you!

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

hey brother, thanks for sharing, reduced my hot spot temp by like 5 degrees. Keep up the good work!

@ImWateringPSUs

Жыл бұрын

I'm glad I could help! Thanks for commenting!

Dude! Thank you for this video! I've always wanted to try undervolting but never felt comfortable before without a proper guide providing not just the method but also a good starting point for the card. Your video helped me actually understand what I'm supposed to be doing with the curve editor, and in the end I was able to get a stable UV/OC very similar to what you said you run. Helped me drop my temps by 5C and raised my bench score in Port Royal by 8%! I'm really happy with these results. Thanks again! 👍

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

after having problems in the game for more than a month and watching dozens of tutorials, but you have solved my problem. you are the best bro, GOD bless...

@ImWateringPSUs

11 ай бұрын

Glad it was helpful and I really can’t thank you enough for the detailed feedback!

Thank you so much for explaining this in layman's terms. Much appreciated.

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

Really good video man my system runs soo cool now, sub well deserved.

@ImWateringPSUs

6 ай бұрын

Thanks a LOT, glad I could help :)

Well that was so simple, thanks for the vid brother!

@ImWateringPSUs

8 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!

Nice Vid my man, just followed the instructions and it is running well 😎

@ImWateringPSUs

Жыл бұрын

I'm very happy it was helpful, thanks a lot for commenting!

very good advice/settings, saved me a lot of time testing myself... thank you mate! 🙂

@ImWateringPSUs

9 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!

Very Helpfull, thanks a lot ! First undervolting here and it works great ! :D

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

Great video mate. After undervolting my 5700x using your video I've now done this. Great stuff

@ImWateringPSUs

9 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!

This is my first time under volting a gpu. Very solid tutorial. rtx 3060 12gb out of the box would boost all the way up to 1942mhz and temp would be around 73c pulling around 1080 volts. Followed your guide and my card has a boost to only 1920 but the temp maxes out at 64c at 900 volts and is completely stable. More than a fair trade off. Also went from pulling around 175-180+ watts to 127 watts on full load. Thank you very much!

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@parallelblox6822

11 ай бұрын

how much of an increase in fps did you have?

@guts_aymen

11 ай бұрын

@@parallelblox6822 undervolting won't increase your fps by much maybe just a bit but it will definitely lower your temperature and power consumption

@Pharaoh_Editz

9 ай бұрын

​@ImWateringPSUs hey bro how to undervolt a 8600GT 512MB thanks

@neooooooooooon

2 ай бұрын

I also have the same undervolt config, but still no change in temps.

Thanks so much, this really helped. I have 3060 12gb and I was fine with other games, but the only game that was creating issues with my temp which would cause a crash is Black Desert Online, I locked the FPS on 60 on Remaster Ultra settings and undervolted as per your instructions, now the temp is stable around 60 degrees and the game runs perfectly on high-end settings. Thank you again, cheers mate!

@ImWateringPSUs

10 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!

@TheWolfDude91

10 ай бұрын

@@ImWateringPSUs You're most welcome, I subscribed! Cheers ^^

Been poking a bit around with various guides, still new at undervolting and came across your guide too. I'm still tweaking my undervolt settings, but I can tell that my RTX 3060 Ti with GDDR6 runs with 906mv +135 gpu and +700 on mem

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

Just gotta say i tried everything before in order to reduce the temperature of my 3060, i reduced the power limit and kinda worked, then i saw this video and decided to try, and it works, before my temp in games like Resident evil 4 remake were in the 75-80's now it sits at 57-65 which is perfect, thank you so much!

@ImWateringPSUs

7 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!

Never thought of /under/volting the GPU. I thought it was nuts but...wth it works! Thanks. 💯

@ImWateringPSUs

9 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!

Thanks a lot for this quick and easy tutorial, I never thought of undervolting. My RTX 3060 Dual OC runs now stable on 887 mV and 2000 Mhz on QHD (1440), frames increased by 10 FPS on average, temperature dropped by almost 10 degrees to 62 and the power draw went down from 170 W to 110 W! By the way I still run the i5 4690 K overclocked on 4.3 GHZ on the good old Asus z97 P board, still no need for new hardware in 2023 as even recent games are running well with high and even ultra settings with no performance issued whatsoever.

@ImWateringPSUs

11 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :) I’ve got other tutorials on the channel and more coming, if you like the content consider subscribing as it REALLY helps me a lot!

@stargirl5194

2 ай бұрын

only 110w at 2000mhz? for real

@ronnypolanco6167

15 күн бұрын

@@ImWateringPSUs What about the fans configuration for dual oc 3060 12gb ?

Great video! I’m getting my 3060 12gb later today! Will come back and comment on my results after 😁

@ImWateringPSUs

Жыл бұрын

That’s fantastic! Great buy and I can’t wait for some feedback :)

@QuantumVCT

Жыл бұрын

I did this & it worked great! I was wondering if I can save it so I don't have to reapply these settings every time I turn on my computer

@QuantumVCT

Жыл бұрын

@@ImWateringPSUs Hey boss! Question. My friend has a RTX 3080 TI. What settings would you recommend for him as his pc tends to get hot & he wants to lower it especially since it'll be getting warmer soon where he is

Thank you brother! The Best setting ever!!

@ImWateringPSUs

7 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!

I’m the one that requested you do the 3060 I’m gonna try this thank you.

@ImWateringPSUs

Жыл бұрын

I remember! Let me know how it goes :)

Bro. You are a headache and time-saver. Everything about this video was PERFECTION. Subbed to say thank you for your EFFICIENT video EDIT: Didn't do much for me. It seems. MAYBE 2-3 degrees if at all(not sure). But it seemed to have gotten rid of a bug. Once in a while I'd get a random ''flash'' where for like 0.5seconds the screen turned dark. That seems to be gone right now. But other than that, neither my idle temp or while gaming has changed.

@ImWateringPSUs

11 ай бұрын

Hi there! First of all, thanks a lot. If you do want to get a bigger temperature drop, try this: 875mV 1800Mhz with no memory offset, without hitting the “L” key

@ismailbouher3349

10 ай бұрын

​@@ImWateringPSUs875mV and 2000Mhz work perfectly and temp from 71C to 61C thanks

Many thanks mate, very helpful!

@ImWateringPSUs

Жыл бұрын

I'm very happy it was helpful, thanks a lot for commenting!

It worked well, 975mV and 2002 MHz for my Gigabyte Windforce RTX 3060 12GB OC. Thanks!

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

Damn brother thank you so much for this video! I installed a 3060 palit dual card today and it was jumping instantly to 70c! With your help I've managed to get 2000mhz @ 925mv with a temp of 62c!! So stoked.

@ImWateringPSUs

Жыл бұрын

I'm glad it's working! Thanks a lot for the comment and take care, consider subbing for more tech content!

@rakesh1519

11 ай бұрын

and max power usage?

@AINGIRY

11 ай бұрын

@@rakesh1519 105W, but I play my games on low preset competitive settings.

@sloppychoppy

5 ай бұрын

Yooo I have a Palit 3060 too can I copy your settings?

@AINGIRY

5 ай бұрын

@@sloppychoppy hey give them a try test it in bench mark for 10-15 mins or so see and see if it’s stable. Every GPU is different. The worst that will happen is your comp forces closes apps or force shutdowns your PC. If either happen go back in and reset and start again.

just undervolted my card thanks to your video, went to 900mv, from 165tdp to 125tdp, good enough to keep my temps low, at 1837 clock speed :)

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

Going to try this later, thank you

@ImWateringPSUs

Жыл бұрын

Let me know how it goes! :)

You sir are a legend.. was able to get my temp down by 15 degrees.

@ImWateringPSUs

4 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

thankyou very much.u deserved like and subs

@ImWateringPSUs

9 ай бұрын

Thanks a LOT my man, really :)

Thank you. this is working so well.

@ImWateringPSUs

11 ай бұрын

Glad it was helpful my man! Subscribe if you wanna support the channel’

@TamalPlays

11 ай бұрын

@@ImWateringPSUs subscribed. Can you make a video on undervolt r5 5600?

Excellent! 72 temp max value, 82 hotspot max value for 10 mins of heaven benchmark in hwinfo! With your setting (including +800 memory). Thank you so much 🙏 Asus rtx 3060 dual oc (12 gb), ga106 chip

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@newexe1818

Жыл бұрын

@@ImWateringPSUs thanks for spending time to record this vid! Do u have some experience with 3060 ga104 chip?? Is him has more overclocking potential?

@luqman2871

Жыл бұрын

if i drag 900 to 1900 the curve doesnt flatten like yours how did u do it?

BRO I love you! was at 73° before now its 62° max no changes in gaming performance!!! And fan speed also got better. It was loud as shit before now its great TY

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@vitajcie

Жыл бұрын

@@ImWateringPSUs Legend!

Thank you do much mate,i have MSI 3060 ventus 2x ,my problem was high temperature up to 74 ,now after your help get 65 what is amazing and Play at world od tanks on ultra setings .IT was do easy to do woth your instruction💪💪💪💪Again big thank you to you Man💪💪💪💪💪💪

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@Crafty-One

11 ай бұрын

I have the exact same card. I was playing RE4 at 80 celcius with noisy fan at 2500rpm. 1440p res at all maxed out. Idle I was sitting at 45-55ish

thank you a lot for explaining all that so even i can understand:D I have a question regarding adding mhz to the memory: if i play games in 1080p or even lower res - there is no point in adding them?

Thanks dude, a cooler pc is nice in the summer, room gets so hot playing Baldur 3

Thank you so much! Love the video simple and straight to point. But is it safe to keep 800 even when 950 is taken to 2000?

@ImWateringPSUs

6 ай бұрын

Glad I could help! Consider subscribing to the channel to support me :) Yes 800 is very safe

Thank you so much! My 3060 Ventus is alot more quiet now and cooler!

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

Great tutorials on rtx 3000 series, you are a gold mine. These settings are working on rx 6000 series? Thx in advance!

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :) The settings for the RX 6000 are very different, but luckily I do have a RX 6700 XT tutorial already on the channel (and that’s the same for every RX 6000 card!) Plus I have one already recorded about the 6900XT that my editor should get ready in a couple weeks max!

My msi gaming x 3060 never been better after I used your settings! Thanks a lot he he ^

Thanks for the video. Since I also use my second PC, which has 2060 Super what settings would you recommend for that one?

@ImWateringPSUs

Жыл бұрын

The settings from my RTX 2080 video apply perfectly to the RTX 2060 Super! Thanks a lot for the support😇

I have a Prebuilt Alienware, When i ran the kombuster stress test the temps increased dramaticly then is slowed down at around 63 c and topped out at between 66 and 67. I'm pretty sure in game I got up to 75 which is hot. so it improved by 8/9 degrees. Plus it will help lag spikes!

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

I apologize for asking what may seem like a simple question, but I am not very experienced when it comes to overclocking and undervolting. I would like to know if I need to keep MSI Afterburner running in the background to maintain my undervolt settings, or if I can safely close/delete MSI Afterburner after applying undervolt settings. Thank you in advance.

@ImWateringPSUs

8 ай бұрын

You can minimize it, but you need it running :)

Huge help! Got me 10 degrees down!

@ImWateringPSUs

4 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

Thank you so much ! My gpu was at 82 c in some ray tracing games (3060 ti) i was uncomfortable with that, its now about 10 degrees cooler while having a few more fps ! Also consumes 40 watts less power which is really nice

I have question about the curve before the 900 mark, will this not decrease performance at the initial stage of run for the card? for example in less demanding games? maybe theres something we can do about the initial curve? followed your guide and i'm sitting at 925mV 1965mhZ core + 800 mem i got -4 degree, was getting artifacts when i pushed it harded, im happy with this anyway, model of card rtx 3060 gigabyte eagle lhr, need to be tested tho in demanding games. thanks for this guide man it really helped :)

Ok i just watched your other undervolt videos, and it sucks that you did us dirty here, bcs for example in your 4070ti video you did the curve more smooth, gave info about making more profiles etc, can you maybe redo this tutorial? if you cant, bcs you don't have 3060 anymore, should we stick with this? or we should follow some parts from your diffrent videos? i would be glad if you could elaborate :)

I got better temperatures thanks to this, thank you

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@i0opz

Жыл бұрын

Did you get higher fps too?

cool. short and effective. thank you

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! :) Thanks for commenting!

Grazie per la guida! Ho notato notevoli cambiamenti, ma... Con il voltaggio in stock: 83watt in idle e 322watt in gioco (intero sistema) Con il voltaggio a 900mv: 112watt in idle e 266watt in gioco (intero sistema) Mi sapresti consigliare un modo per non consumare 30watt in piu quando la scheda è in idle? Per ora attivo il profilo con il voltaggio modificato solo quando gioco

@ImWateringPSUs

Жыл бұрын

Mi fa molto piacere! Per quanto riguarda il wattaggio, vuol dire che la GPU non downclocka del tutto in idle. Per caso hai premuto “L” per lockare la frequenza? Quello è spesso il problema!

nice work. THX

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

I followed your steps and my temps did get better but I'm getting some lag spikes during some games and a weird noise is coming from my gpu from time to time during gaming which is odd. I have a zotac rtx 3060 twin edge oc 12 gb. Any help would be appreciated!

@ImWateringPSUs

Жыл бұрын

That's VERY odd tbh. I'd say it could be the memory, set it to 900mV and 1800Mhz with no memory offset and see if that fixes it!

i have an RTX 3060 OC does this work with that and would it be recommended i have a ryzen 5 5600x as well but when playing warzone my gpu goes to 68c and i sometimes stutter or freeze for a second or two any fix?

thanks this helped a lot

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

you're the best!

@ImWateringPSUs

7 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps the channel!

Can i stilll apply this if i watched your overheating guide though?? My 3060 was over heating so its on 1750 mhz from the 825 point on the curve

@ImWateringPSUs

Жыл бұрын

Yes you can!

Hi there do you have to keep msi afterburner running to have this settings?

Awesome tutorial dude u just saved me form returning gigabyte 3060 oc because it was super loud pretty much unusable after undervolting it to 875 and playing with the fan curve i got it to inaudible and working at 75C, compared to 80+ on default. Thanks a lot.

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this!

@angeloatienza8730

Жыл бұрын

Hello! can I ask for your fan curve? thanks.

@1GTX1

Жыл бұрын

75c is great, but with same undervolt my 3060 msi ventus 2x runs at 64C 50% fan speed. and my case has bad airflow, my previous 1660 super and 1060 were always at over 80c

@angeloatienza8730

Жыл бұрын

@@1GTX1 do you always run the fan speed at 50% or do you run a curve? if so, would appreciate if you can share it.

@1GTX1

Жыл бұрын

@@angeloatienza8730 No, it's on automatic, on previous GPUs i had a curve..

got my palit rtx 3060 12 gb card from maxing at 80°+ temps to below 70° at 857 and 1905 stable thanks and subbed!

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

I'm a little bit confuse. You said that this UV will decrease power compsuption. But I see that when u change for 110% power you left it and didnt back to 100% or lower. Just the change settings of curve will lower power compsuption?

@ImWateringPSUs

4 ай бұрын

Yes. But only if you subscribe to the channel

thankU so much, my gigabyte gaming oc variant ran at stock 1081mv...and temps were aorund 67c...after undervolting to 925mv temps are now 56c and power consumption also decreased by 50-55 watts

@ImWateringPSUs

11 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :) I’ve got other tutorials on the channel and more coming, if you like the content consider subscribing as it REALLY helps me a lot!

Hi sir, once you have did this how can you save the settings? And MSI afterburner need to be in background when turn pc on or after this you can remove the program?

@ImWateringPSUs

9 ай бұрын

Yes you can save them but you still need afterburner minimized!

Definitely help with temps. First time doing this on a 3060 ti to 8gb and it work its wonders. Just a question. During idle times where I’m not doing anything, the GPU stays at 1875 MHz. Is this normal? Thank you.

@ImWateringPSUs

Жыл бұрын

Glad it was helpful! If you want the idle clock to drop, do not hit the “L” key while following the tutorial!

I've got the 3060 ti with gddr6x, managed to get it stable at 950 / 2000, thx alot for the recommendation!

@ImWateringPSUs

Жыл бұрын

That’s a REALLY good result, you got a golden sample right there! :)

@sir3nz478

Жыл бұрын

I can’t even get 950/ 2000 with 3060ti gddr6 I get 950/ 1998 or 950/ 2004 can’t get 2000 even

@sir3nz478

Жыл бұрын

Not sure if it would be stable anyways

Thank you so much, my first time having a PC and it helps so far. Question tho, will this extend or decrease my PC’s life capacity? I want this pc to last me a long time and run smoothly no matter what

@ImWateringPSUs

4 ай бұрын

Nope, it won’t affect the lifespan. But drop a like and a sub :)

Great video! But i want to ask if there is a difference between 3060ti and 3060ti plus?

@ImWateringPSUs

Жыл бұрын

Thanks a lot😇 There is a performance difference, but both get undervolted in the same way!

Thanks good guide

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

helpful a lot !

@ImWateringPSUs

3 ай бұрын

I’m really happy it was helpful, thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel & for more tutorials!

Hello, i try to do this, but when i use everything like you i cant work in MSI Afterburner, because i must to be on Benchmark test app for full PC usage, when i do ALT TAB or just click on MSI Afterburner, the temp and all start to cooling and go down, how can i change it, that MSI Afterburner and Benchmark test are sync ?

@ImWateringPSUs

Жыл бұрын

You need to uncheck the “full screen” option when starting heaven benchmark!

I have 3060 oc dual 12G I have issues with temperature when i render in unreal engine My gpu temperature go up to 93c! And its crazy Your video helped me alot and now my temp in heavy render just 60c!😐 Thanks maaan youre legend ♥️

@ImWateringPSUs

6 ай бұрын

My man! Glad I could help, consider dropping a sub to support the channel :)

Hi, I got my EVGA RTX 3060 XC LHR (12GB) running at 1920 MHz @ 875V. Is that good? I've tried to stick around the stock speed as close as possible. GPU temp seems to max out at the 64c with the fan curve at the stock setting.

@ImWateringPSUs

Жыл бұрын

That’s VERY good if stable! Great work

@carlmarley3017

9 ай бұрын

Same here and no problems 👍

hello i used this tutorial for my first undervolt and about the ending section of the video with the 10% overclock, does that still count as undervolting or is it just overclocking and no undervolt?

@ImWateringPSUs

9 ай бұрын

It’s still undervolting!

if u have the 3060ti w/ 8gb of DDR6, ru supposed to do something different?

I've seen a lot of 3060 undervolting tutorials but only you tell to put the "Core clock" to -250 before editing the curve. Why? Is there any difference?

@ImWateringPSUs

Жыл бұрын

Yup! This makes it much quicker and easier to flatten the curve!

@lonebunny537

Жыл бұрын

@@ImWateringPSUs i see! Thanks

Just want to say: Thank you very much. I have a MSI 3060 OC 12G and I was able to undervolt it: to get 1950mhz @ 900mv. I went from 75-76°C to 65-66°C when using UNIGINE Superposition.

@ImWateringPSUs

4 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback :) Consider subscribing if you wanna support the channel!

@intech7863

Ай бұрын

well i dont know what model msi you have maybe ventus but on evga xc 3060 barery get sometimes over 70c gaming at 1440p the card stay cool and quiet

the best tutorial about undervolting.

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

Something I don't understand - if we are doing this to reduce power consumption, why increase the power limit? Looking into this because I'm mostly likely upgrading to 3060 from 1060 tomorrow and I want to lower power consumption to about same level as 1060. I know I could do it by decreasing power limit to 70 percent, but I hear this is the better way. Though my tiny brain doesn't really understand how this works and I'm scared to damage the gpu. :D Also, did you happen to test by just how much power consumption is decreased on a 3060 with your setting vs default ?

@ImWateringPSUs

Жыл бұрын

You don’t really have to raise the power limit. The reason why I recommend doing it, is that occasionally there will be a spike in power and if you have the PL unlocked, you won’t notice any FPS drops, on the contrary, if you have the power limit locked the card will downclock. I think it’s the perfect tutorial for your needs, follow it and you won’t look back :)

@Broformist

Жыл бұрын

@@ImWateringPSUs I'm also suspicious of the fact that doing it this way seems to lower the clocks for voltages below your chosen peak one. Most games I play are older games that didn't even utilize my gtx 1060 fully, and this type of undervolt appears to only work for the most intensive stuff. For less intensive games this would appear to actually make GPU use more power, not less. I just settled for lowering power limit to my new card for now before I look into other ways of undervolt. Even at 65 percent power limit my RTX 3060 runs WAY faster than a 1060 while consuming even less power, it's an over 60 watt decrease. Maybe I will need to raise power limit for some game eventually but for now I will just stick to this simple setting.

@Broformist

Жыл бұрын

After learning a bit more about Afterburner controls I ended up setting my 3060 to 925mv@1965mhz. Without that silly negative offset that would downclock the lower voltages. I left those at default values and only raised the 925mv point, then dragged the mouse to the right while holding Shift until all other voltage points got selected together with the 925 point. Then hit Enter twice and selection gets flattened. I have no idea why most tutorials on youtube recommend to do this negative offset thing but it seems inefficient to me. I left power limit at default too, doesn't seem to be any reason to increase it when voltage never goes above 925mv anyway. Max power draw is ~130W now. GPUZ reports this as a 33 Mhz overclock.

hello mate! thx for the video! i had 73.0 C and HOT SPOT 86.0 C ! with hwmonitor!, im using the first confing from you'r video! i can use all without problem! but i choose this one for lower tempeture!. do you think is ok those number?

@ImWateringPSUs

6 ай бұрын

Glad I could help my man, consider subscribing to support the channel :) The numbers are fine!

Does this decrease the power draw of the gpu? Im using asus dual oc v2 3060ti on ryzen 5700x using rog 550w psu

@ImWateringPSUs

Жыл бұрын

Yes it does, dramatically!

I did this exact guide for my RTX 3060 Ti (gddr6 version not gddr6x). I noticed when I apply 875 volt to the 1900 mhz, my mhz switches to 1890. Should I put it then above 1900 in the first place?

@ImWateringPSUs

8 ай бұрын

1890 is gonna be perfectly fine :) Drop a like and a sub if it was helpful!

How badly will reduce the gpu life if you apply the memory clock OC? I won't increase the core clock but i would want to ad +500MHz to memory clock but im afraid that i reduce the gpu life.

@ImWateringPSUs

Жыл бұрын

To quantify it specifically is difficult, but giving it just +500Mhz it would be very little, I’d say in 1-2 years maybe you’ll have to drop the memory clock by 50Mhz, roughly!

I've got a 500W psu. Will this be ok for my 12gb version with settings you mentioned?

@ImWateringPSUs

Жыл бұрын

Yes, absolutely!

It works like a charme and super easy to follow! Thanks for this great tutorial, really helpful!! 900mv with +800 memory and 1950 MHz clock speed :) 69° max Temp.

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :)

@rakesh1519

11 ай бұрын

Power consumption?

@TamalPlays

11 ай бұрын

@@rakesh1519 around 120w for me +-10w

Gigabyte GeForce RTX 3060 EAGLE OC LHR 12GB GDDR6 : - 7C nice while benhmark, what about memory clock? +800 or i should leave it at 0?

@ImWateringPSUs

Жыл бұрын

I’d say if you don’t need the extra performance leave it at 0!

Hi bro. I used the same measures on my 3060 ti OC which I guess is what you meant by 3060 ti plus. It keeps crashing. Do you have any idea what I need to change to make it stable?

@ImWateringPSUs

Жыл бұрын

The Plus is actually a different card! If the settings are unstable for your, set it to 1800Mhz and 900mV with no memory offset

@rahul-qm9fi

Жыл бұрын

@@ImWateringPSUs hi bro. I set it to 1850/900mv and my power consumption went from 200 Watts to just 110 Watts. That can't be right, no? Am I doing something wrong?

Would I even get a benefit doing this if mine runs no hotter than 65c? MSI 3060ti Ventus 3x btw.

@ImWateringPSUs

Жыл бұрын

You could lower it a bit more and save power!

Would this possible also have an effect on workloads like gpu video enhancement/rendering....topaz, adobe stuff, madvr?

@ImWateringPSUs

8 ай бұрын

Yes, it will work better :)

Hey man, great video! I was following the steps and I cant seem to go above 1837 mhz on my 3060 :( any suggestions on how to boost it to 1920mhz? i tried putting it on 925mV as well..

@ImWateringPSUs

4 ай бұрын

Try 950mV for 1950 :) But subscribe to the channel, it brings good luck

Thanks a lot it works perfectly, just got -15° degres on my GPU and +5% perf doing IA renders ^^, in this summer time, having a cooler GPU is really life saving ^^"

Thanks for the video. I have an RTX 3060 12G inno3D and managed to set it at 900 mV with +800 on the memory speed and 2002 on the core, ran the benchmark for 10 minutes and its stable at 60-63°C with 36% fan speed. Tried pushing it to 2050 on the core clock but it crashed. On the hot spot however I got 73° so I don't know what to think about that. EDIT: I played a bit of bf 2042 and it crashed so I added +50 mV(950) and now it ran well, no issues. The performance also seemed to be better. Had an avarage of 75 FPS in bf 2042 on ultra settings 2k res dlls quality on a 128 player server. Set the fans to hit 50% once the temps hit 60° and the gpu stayed below that.

@ImWateringPSUs

Жыл бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to write this! :) You really have a Silicon Lottery winning card there by the way! Great results my man!

@mi27262

Жыл бұрын

​@@ImWateringPSUs Thank you for your answer. I do have one question. The max power limit in afterburner for me is at 100% instead of 110%, why is that?

Hello ! If i use 5:00(timestamp) settings can i add +800 to the memory clock ?

@ImWateringPSUs

11 ай бұрын

Yes!

@naqibhamzah12345

11 ай бұрын

@@ImWateringPSUs thank you !

Question, do I need to have afterburner running all the time or can I undervolt and then close it?

@ImWateringPSUs

Жыл бұрын

You can close it but when you turn off your PC the settings will reset unfortunately, it’s better to keep it on

Did everything like you but the temp is 92 degrees and GPU is 290-450 mhz plz hlp

I have rtx 3060TI asus gddr6x i wanna set in this card memory on 800? its safe?

@ImWateringPSUs

11 ай бұрын

Yup 800 will be fine! But I have a dedicated tutorial for the 3060 Ti!

Bro my pc gets shut down during pubg gaming which needs lot of power but due to low voltage of current in my house whenever i open pubg at night the pc shuts so will this trick work to lower the power consumption so my pc won't shut?, or any other settings you will recommend?

@ImWateringPSUs

9 ай бұрын

Yes it will fix it!

So sorry for bothering with another question.. I love the results, the only problem I have with this method is that now my card always runs at the overclocked mhz (2000 in my case), even in idle. How can I fix this?

@Daniel57925

6 ай бұрын

I think I managed to fix this by pressing the L key untill that yellow line which helped us flatten the curve disappeared. Did I do the right thing? Now I only hit high mhz when the gpu is under load

@ImWateringPSUs

6 ай бұрын

Yessir, did the right thing :) Be sure to subscribe to the channel for more!

I followed all the steps in the tutorial and all the numbers matched except for the CPU mhz it only maxed to 1807, I have a RTX 3060 Ventus 2x 12gb, I’m also kinda new to pc so idk if this is good or bad

@ImWateringPSUs

6 ай бұрын

That’s perfectly good! Consider subscribing if you wanna support the channel!

My stock gpu temp is 73 and after its 70. Am i doing something wrong? (On idle its 45 average)

@ImWateringPSUs

Жыл бұрын

Try 775mV and 1750Mhz or even a bit less if you're looking for the lowest possible temperature!

Works like a charm when the card is under load. But when on desktop, card stays on like it's under load. It does not go to low power. Did I miss a thing ?

@ImWateringPSUs

Жыл бұрын

Do not hit the “L” key and it will downclock at idle

Thank you very much now my coil whine has been reduced significantly. I set the frequency to 1850 and it's very quiet.

@ImWateringPSUs

9 ай бұрын

I’m really happy it was helpful! Thanks a lot for taking the time to leave some feedback! :) I’ve also got a few build videos on the channel and more coming, if you like the content consider subscribing as it really helps me a lot!