Amazing!, what I missed for 11 years now owning a 9-5NG Now roll back on Viggen , hope this will work (open SID), I’m new in OG

Literally going downstairs to the garage to check if my Saab 9:3 2006 already has this done ! If not will definitely be doing it today

Hi, thanks for this. Still awaiting part 2 to this video

@TrionicSeven

6 жыл бұрын

It's unfortunately very hard to shoot the next part because my new car has the sid in the MIU, can't really get a camera in there...

@ROYteous

4 жыл бұрын

@@TrionicSeven shouldn't be too hard to mount an action camera such as a gopro to see it.

Väldigt bra förklarat, har openSID i min 9-5a och har lite svårt att förstå det. Detta underlätta mycket.

@TrionicSeven

7 жыл бұрын

Hoppas det hjälper! :)

Kanonbra och tack! Just what I need to keep my 9'5 running in the streets and not in to a highcost garage. Greetings from Norway!

thank you very much! i just got my first saab and apparently it already has an open sid and now i know how to use it. keep your flag flying high!

@TrionicSeven

7 жыл бұрын

Glad you like it :)

Suveräna guider! Tack

@TrionicSeven

7 жыл бұрын

Tack för din kommentar :)

Really excited for this series. Going to need to get a spare ecu and start messing around :)

@TrionicSeven

7 жыл бұрын

Good luck! Beware, because it's highly addictive :)

This is so cool! I have 9-5 2002 Aero but automat. Open SID2. Now i finally understand what are those reads! :D Tnx :)

@TrionicSeven

7 жыл бұрын

Glad you like it! :)

I love this guy. ❤️

Omg this is such a good video,! i never new open sid displayed so much data about the car

@TrionicSeven

7 жыл бұрын

Glad to be able to help!

enjoy all ur vids .... great job ty ... west of new york city usa here

@TrionicSeven

5 жыл бұрын

That's great to hear! I was in NJ just recently (I assume that's where you are?)

thank you thank you thank you thank you

@TrionicSeven

7 жыл бұрын

Glad you liked it!

Great! Now I have motivation for fixing my missing pixels.

@TrionicSeven

7 жыл бұрын

Do it! I have never had that issue, but I think it's just a matter of getting a flat cable.

Thank you

Jonathan. You're a genius!! Thank you!!

@TrionicSeven

6 жыл бұрын

Nah, not a genius. Thanks anyway! :)

@chicagoui9299

6 жыл бұрын

Can I ask you, I have an 04 95 ARC 2.3T w ESP. I tap the plus- buttons and I can't get my sid to open. Any thoughts?

@TrionicSeven

6 жыл бұрын

Well, opensid isn't included from factory. You need to enable it (see my other vid)

@chicagoui9299

6 жыл бұрын

Ahhh okay. I missed that sir I will re-watch and pay better attention. Americans. Sheesh. Haha

@TrionicSeven

6 жыл бұрын

Lol

Hi! Awesome channel! I just got my hands on a 1999 9-3 Viggen (and yes it's a real one with T7). Is the contacts and pins the same? I've had trouble connecting to my I-Bus and don't really want to rip apart everything to install the P-Bus before knowing that the pins are the same as in the 9-5. Kör försiktigt. /h

Well done Jonathan. A really anticipated video. I have open SID in my 2006 9-5 aero and it is very informative as well as addictive. Please make sure that you explain all the parameters and their values. There are available info on the parameters online but their values and their respective normal boundaries are not explained well. Also, are you aware if there is a performance parameter available to measure accelaration etc. Something similar to the eSID available for the 2007+ 9-3 ss models. Thank you and keep up the good work.

@TrionicSeven

7 жыл бұрын

Hey, thanks! Please tell me more about the accel feature in eSid. I've never used it so I don't know what it does. Is it the same thing as the 0-60 and 0-100 times you can find in the obd2 apps? Oh, and I won't be able to explan *all* the values, there are hundreds of them :) I will focus on the important ones and give estimates of range and so on. Problem it, too many details and it will turn into a lecture about engine internals and modern electronic engine management systems!

@sbske1

7 жыл бұрын

Trionic Seven , Yes it is similar to the accelaration features in obdii apps. I am asking if it is possible because esid takes the data from the ecu and shows them on the 9-3 sid. As for the parameters i know there are many and it is hard to describe them all, just do your best as always. Thanks. :):)

@TrionicSeven

7 жыл бұрын

Hey! No, opensid does not have that feature as far as I know. That's somethings that the apps are better at :)

Hi, thanks for the videos, but where can I find the second part?

Hey! Great video. My amul says -513. Any reason to be concerned? Would this be a tuning error or an error on the car? 2.0t stage 1 .

@TrionicSeven

7 жыл бұрын

Yes, I'd definitely look into that. Check for vacuum leaks or a bad tune.

@glennnyland7047

7 жыл бұрын

Thank you for informing. 2 more questions.1: Does the fact that i got 10 in Limp value and -614 in AMUL have a connection? My buddy has +1000 in amul now, but no Limp. 2: WIll exesive + and - values be caused by different things since it compensates in 2 different directions?

Can you make a video on how to enter the radio code

@DanTaninecz

5 жыл бұрын

Gotta get a tech 2 to fix it. Takes 4 seconds. Typically a nice mechanic will do it for free.

i have a 98 saab 900 s and my radio wont come back on is the sid causing that to happen ?

@TrionicSeven

6 жыл бұрын

Sorry, I don't know much about the 900. You can ask this question in our Community Forum: facebook.com/groups/733705113501723/

How to convert error codes? For example i have 5216 error on my screen...

Hi, is it possible to have Open SID feature with SID 1 display installed (the one with three buttons on the left side)?

@TrionicSeven

7 жыл бұрын

Good question. I don't actually know but would guess it's possible.

@drndarevicnikola

7 жыл бұрын

Trionic Seven Ok, thanks anyway 🙃

@musikad2007

7 жыл бұрын

yes, i had open sid in my old my99 saab 9-5

@drndarevicnikola

7 жыл бұрын

Thanks guys, that's a big relief!

@TrionicSeven

7 жыл бұрын

Great to know there are so many knowledgeable people in the comments! :)

Hey what's up man. have a question, my open sid shows me that my LIMP is on 10 and I have a p1231 hope u see this and tell me what exactly is my problem. thx in advance!!

@TrionicSeven

6 жыл бұрын

Hey, I have realized that LIMP is more complex than I thought. Unfortunately I cannot tell you the exact problem. Perhaps you can ask this question in our community group? facebook.com/groups/733705113501723/

if when you floor it your mair is 1100, if you divide that by 3.1 it gives you your torque and that comes to 354nm. so if you divide mair by 3.1 you will get your torque in newton meters

@TrionicSeven

7 жыл бұрын

Exactly! I'll talk more about this in later vids :)

The steering wheels buttons doesnt work normaly , when i push radio volume for example it honks . i checked the connection cables and they look ok. i heard that if SID was replaced and doesnt match the car gives wrong commands on these buttons. I bought my saab 9-5 2004 like that . Any one have any idea on this issue ?

@TrionicSeven

7 жыл бұрын

Good question, I don't know.

I had this available but for some reason now i only get the "engine mode" menu. Can't open up these readings. Does anyone have a fix ?

@TrionicSeven

5 жыл бұрын

Sorry, I don't know the answer. Perhaps ask in our forum? facebook.com/groups/733705113501723/

i have a 2003 9,5 aero limp mode doesnt want to reset

Hej! Vet du hur man aktiverar OpenSID på en Saab 9-3?

@TrionicSeven

6 жыл бұрын

Det går bara om du har en 9-3 med T7. I så fall, kolla min video "Enabling OpenSID"

How do I convert the code to hexadecimal?

Hej hej, I am looking for a way to change the language of the display messages on my SID from Swedish to English. I have a Saab 9-5 2.3t from 2007. Can you help me out because I don't speak Swedish so these unreadable foreign messages are really making me feel uncomfortable! Thanks!

@TrionicSeven

7 жыл бұрын

Good question. I would guess that you need a tech2 tool :)

My car is colecting Knocks at one cylinder(nummber 2)after i change the spark plugs with new,before that cars was colecting knocks on cylinder N-r 3,Whats is wrong with my car?? No missfire recorded on the open SID using only gasoline super 100 octanes,The engine is recently rebuild completely.WTF is going on,i'm about to give up on this scrap.I ll be grateful if you respond to my message and give me some advice.

@TrionicSeven

6 жыл бұрын

Hey! I don't know what could be the problem, but hop into our community forum and you'll get a lot of answers: :) facebook.com/groups/733705113501723/

Hur får jag detta på min 9-5 2.0t -04?

@TrionicSeven

6 жыл бұрын

Kolla min film om "saab tuning introduction" :)

Did you make part 2 ?

@TrionicSeven

6 жыл бұрын

Not yet, the car had an engine failure and in the new car it's difficult to shoot the opensid monitor. It's on the way though! :)

I had an Audi and all I had to do to get diagnostics was press and hold two buttons on the climate system. Why did Saab make it so hard to do?

@Comrade420_

2 жыл бұрын

Because it's saab:)

My lamn is at 0 all times

Please try to make boost not lower than 2000 (2.0 Bar), otherwise your engine will not work properly.

@TrionicSeven

7 жыл бұрын

Lol

Can you also can see how much turbo pressur you yust sorry for me englisch

@TrionicSeven

7 жыл бұрын

Turbo pressure depends on weather and temperature so it's hard to compare. But I tried real quick and it's about 0.5 bar

I wish you lived near me. But I don't even live in the right country! XD I would pay you to install it for me! I contacted the company about a adapter and they never got back to me :(

@TrionicSeven

7 жыл бұрын

Check out my enabling opensid video and the link to the combi adapter by johnc.

@capang9555

7 жыл бұрын

I messaged the guy for the combi adapter and he never got back to me

@TrionicSeven

7 жыл бұрын

I'd say try again, he's always responded quickly to me :)

@capang9555

7 жыл бұрын

Okay. Thanks :) gotta see how much it's going to cost me :S poor guy here! XP

@TrionicSeven

7 жыл бұрын

Around €100 if I'm not mistaken. But you can instead send your ECU to a tuner (plenty in Sweden) and get it done there :)

Why don't you blink?

@TrionicSeven

5 жыл бұрын

I do!

Typical corporate bullshit, disabling anything that might make it easier for a customer to work on the car.

@TrionicSeven

5 жыл бұрын

Disagree. This is nothing you want an ordinary customer to play around with.