Thanks so much for this. Tried reading manual and used a few terms that were not listed. Watching you demonstrate was a life saver. Thanks!

@BaileyBuilt

Жыл бұрын

Thanks for watching! I'm glad the video helped you. Good luck with your next project!

@jamesjensen6155

Жыл бұрын

Thx 👍

I’ve gone through the manual twice, but nothing like watching a good demonstration for this first time user.

@BaileyBuilt

2 жыл бұрын

Glad to help! Good luck with your next project!

My dad just got one and couldn’t figure out how to load it, thank you so much for your video!

@BaileyBuilt

2 жыл бұрын

Awesome! Glad I could help. Let him know I said good luck on his next project!!

Very good - thanks!

@BaileyBuilt

18 күн бұрын

Thanks for watching!

I just bought my first nail gun. Thanks for this review.

@BaileyBuilt

3 жыл бұрын

Awesome! Hopefully, this helps you with your projects!

@hyfyre8960

3 жыл бұрын

@@BaileyBuilt it sure did. I bought the exact one and you did a great job explaining all the details. Thanks again!

You’re a lifesaver. The instructions for this product are terrible. I really appreciate you showing the details of loading, use, etc.

@BaileyBuilt

5 ай бұрын

Thank you I am glad I could help!

Very helpful video thank you so much

@BaileyBuilt

2 ай бұрын

Thanks for watching. I am glad it was able to be a help to you.

I just bought one, and didn't have a clue how to load it; but you made that simple. Thanks a lot

@BaileyBuilt

Жыл бұрын

Glad I was able to help! Good luck with your next project!

Thank you sir!

@BaileyBuilt

Жыл бұрын

My pleasure. Glad it helped!

This 20v Craftsman stuff is amazing

@BaileyBuilt

Жыл бұрын

Yes, I have really enjoyed using their tools for my DIY projects!

@jasondevault5066

Жыл бұрын

@@BaileyBuilt DIY definitely. I wouldn't try commercial with them

thank you!

@BaileyBuilt

10 ай бұрын

You're welcome. Glad I could help!

THANK YOU! VERY HELPFUL!

@BaileyBuilt

18 күн бұрын

You're welcome! Glad I could help!

Thank you very much. Your review covered every item I wanted/needed to know more about. Keep it up. You're really a very valuable asset, as are your videos.

@BaileyBuilt

2 жыл бұрын

Thanks Will! I'm glad the video was a help to you!

@Will-dt3yg

2 жыл бұрын

@@BaileyBuilt Will you be doing more videos in the future, I hope. Thank you either way,

@Will-dt3yg

2 жыл бұрын

You're welcome. I'm building another workbench for my Skil 10" Dual Bevel Sliding Miter Saw - MS6305-00. It has been great so far, it just takes A TON of workspace. I'm definitely a DYI'er. Been married over 20 years so I getting the hang of getting my wood projects done while also keeping up with the "Honey Do" list ;) Take Care!!!

Thank you sir. Exactly what I needed as I am embark on remodeling rooms in my home. This was a easy to understand and much much appreciated!

@BaileyBuilt

Жыл бұрын

You're welcome! So glad I could help! Good luck with your next project!

I just pick one up today and this video really help. Thanks.

@BaileyBuilt

2 жыл бұрын

Thanks for watching! Good luck with your next project!

Thank you! Couldn’t figure out how to load the nails, so you “nailed” it 😅

@BaileyBuilt

5 ай бұрын

THanks for watching. Good luck with your next project!

Nice job!! I just got one and I love it!!!

@BaileyBuilt

Жыл бұрын

Wonderful! Glad you like it!

Love this tool

@BaileyBuilt

Жыл бұрын

Yes, it's been a good one for me too!

Great review. Thank you

@BaileyBuilt

Жыл бұрын

Thank you! Glad it helped! Good luck with your next project!

Thank you so much for this video

@BaileyBuilt

2 жыл бұрын

You're welcome. Good luck with your next project!

Great review thanks!

@BaileyBuilt

3 жыл бұрын

Thanks!

Awesome review!! Thanks I made my decision!!

@BaileyBuilt

3 жыл бұрын

Glad I could help!

Dope just bought this tool and absolutely love it!!!! Beats going into my trailer and getting compressor set up and extension cords etc...very fast and accurate!!!!

@BaileyBuilt

2 жыл бұрын

Awesome, great to hear! Thanks for stopping by

@fishsquishguy1833

2 жыл бұрын

Part of the reason I have a hard time getting motivated in starting a home project is looking for and dragging all my tools out. Firing up my big garage compressor and fishing 100’ of airline into my house is a pain in the ass. I’m thinking of picking this up as I can’t find my pneumatic Bostich gun and I already have some Craftsman 20V tools batteries and chargers. You still happy with yours? I read some reviews and they said it was jamming a lot. Any issues?

@savagewarriorzz2199

2 жыл бұрын

No well the straight 16 gauge craftsman brad nailer jammed once but other then that you'll love these tool line up!

@anthonybailey1726

2 жыл бұрын

@@fishsquishguy1833 Thanks for watching. I hope it was a help!

Just picked up this one and the 18 ga brad nail. Loving them so far. Biggest difference vs pneumatic nailers is the weight and these seem way quieter.

@BaileyBuilt

Жыл бұрын

Thanks for watching! Yes, it is a lot quieter than the pneumatic guns I have used. Good luck with your next project!

Great video and information thank you for taking the time to do a great job with the review

@BaileyBuilt

3 жыл бұрын

Thank you! I hope it helps you on your DIY projects!

@andrewmiller5145

3 жыл бұрын

@@BaileyBuilt my next project is going be a little bit bigger than diy lol I'm going to be remodeling our home all the way from taking every wall and ceiling out ripping out the old electric wires boxes floors and level the floors put in brand new wiring Insulation drywall fans and add two rooms in the upstairs I figured I'll have a rough 10k in the material as long as I don't find anything high prices I want to buy to add more detail and decor lol it's bad I have more of a design and decor eye then my wife

@mikelacoste777

3 жыл бұрын

Can you use smaller nails, like 1" or 1 1/2" nails?

@andrewmiller5145

3 жыл бұрын

@@mikelacoste777 I believe you can

@BaileyBuilt

3 жыл бұрын

@@mikelacoste777 Thanks for watching! Yes, you can use 16 gauge nails of most lengths.

My husband bought this gun this morning, about an hour later he brought the instruction manual to me - in obvious agitation.. he said please read this, I can't get it to fire. Well, I didn't read it..I went straight to this video. You answered the problem pretty quickly..my husband didn't see the lock/unlock button 🤣🤦‍♀️

@BaileyBuilt

2 жыл бұрын

Thanks Shawna! Glad to hear the video helped! Good luck with your project!

Nice job!

@BaileyBuilt

Жыл бұрын

Thank you!

Great vid

@BaileyBuilt

2 жыл бұрын

Thanks for watching!

Having bought the 15ga and 18ga nailers (from Metabo, with their fabulous lifetime tool warranty!), I can’t see the need for a 16ga nailer! But, that’s just me, I suppose! Great video, brother! Thanks for sharing!

@anthonybailey1726

2 жыл бұрын

Thanks for watching! Glad you enjoyed it. You know, I haven't tried the Metabo I may need to look at those in the future.

@BaileyBuilt

2 жыл бұрын

Thanks for watching!

@JesustheWordChrist

Жыл бұрын

Bought the Metabo 16 gauge have the sink depth maximum and many sink only a 16th and other I’ve had to tap. Disappointed I’m taking it back

Great review, my friend. I am doing basement framing. Is this good enough? Can i use thicker nails or longer once.

@BaileyBuilt

Жыл бұрын

Thanks for watching! Good luck with your next project!

Thanks I am looking to buy your help appreciated

@BaileyBuilt

3 жыл бұрын

Anytime my friend! Good luck on your next project!

If you know the answer for sure, let me know if you don’t tell me you don’t. It’s up to you I have a craftsman weedeater 4.0 AH V 20 Lithium ion battery it came with It’s 3in tall If I buy the nailer without the battery will the battery from the weedeater run the nailer ¿ OR If I buy the nailer with the battery, will the battery from the weedeater run the nailer also and then I will have a back up battery. Hope that makes sense. Thank you.

@BaileyBuilt

5 ай бұрын

Thanks for reaching out. If it is part of the V20 series, the battery should work on any of the V20 tools. It is my understanding that the length of the runtime of the battery has to do with the size of it. From what I have seen they range from 3.5AH up to 9AH. Hope this helps. Good luck with your next project!

@ruggedrickrude1946

5 ай бұрын

@@BaileyBuilt TYVM

did porter cable sell their nailer design to the craftsman brand because they are both identical

@u-shanks4915

3 жыл бұрын

well they are both owned by stanley black and decker

@woodpecked3D

3 жыл бұрын

@@u-shanks4915 ahh that makes sense. thanks man :)

18 or 16 cant deiced which one.

@BaileyBuilt

2 жыл бұрын

I'd say it depends on what you are looking to do with it. Both of the sizes are great!

I’ve had two brand new guns and both were total junk. The hammer quits retracting causing me to have to push the hammer back after every shot. Does anyone know how to fix it?!

@BaileyBuilt

6 ай бұрын

Thanks for reaching out. I haven't had that problem. I have had mine for a few years with no issue.

@jeeplife2035

6 ай бұрын

@@BaileyBuilt I had Craftsman send me a replacement of the same model. I’m really hoping this one doesn’t have the same issue.

Shit I just got this exact one today and I sure the he Mack didn’t get a battery with mine 🤬🤬😭😭

@BaileyBuilt

Жыл бұрын

Thanks for watching. Good luck with your nxt video!