Something people are not noticing about 4-way clamps. The boards do not need to be the exact same thickness. The underside is all pushed flush. Make that the good side. Slight thickness variations allows access for shims or thin wedges under the top bar across the panel field and put downward pressure for any fine alignment adjustments in the field of the panel. Flatten the 'bad' side with a belt sander to the 'best' as needed.

Very cool! Thanks for sharing; I can see a set of these in my future. 🙂

The thicker the cross bars are, the more down force is generated. Think I‘ll use additional wood underneath the metal bars. Thanks for sharing!

Real nice system Sir.

Great post. Beast the Rocker clamps price. Thanks for sharing.

Make sure to inspect your superstrut because some have burrs around the holes and would mar your panel.

I put packing tape on the bottom of my strut channel to help with glue cleanup.

@donavanshomes

Жыл бұрын

Good idea

If you put wax on the super strut, glue won't stick to it. Thanks for sharing!

That’s cool as Donovan.

@donavanshomes

Жыл бұрын

Thanks

First notification I've received in months. I have all the proper buttons pushed too. Eaglegards...

I was thinking pipe clamps, but then the flatness and level issue would become a problem which these clamps seem to have solved. The new clamps work well and for the money, work better.

Hey Donavan...Been awhile since I've seen a posting on my home page. Thanks for the demonstration and the parts list. Do you ever use biscuits , dowels, or dominos ?

@donavanshomes

Жыл бұрын

I do use dominoes sometimes

Looking good. rr Normandy, Fra.

Good video sir. I have the same clamps made with strut as well. How are you storing them? I made mine 39" long

@donavanshomes

5 ай бұрын

Don’t have a set storage at this point yet

Some painters tape on struts would make glue cleanup a snap

Wish I had a set of those 30 years ago.

I must be using them wrong, because those are aggravating