Lovely crest brother! Excellent testing 💥💥💥

@runerebel8441

Жыл бұрын

Thank you brother 😃

Thanks for another outstanding video, Brother!

@runerebel8441

2 ай бұрын

Thank you brother 😃

Digging the Family Crest my man...now thats some tradition! Awesome work as always. I used an 11/16 bit here in the states..it was fun 👊💯

@runerebel8441

Жыл бұрын

Thanks my friend 😃

good job exactly that i wanted to know about drilling the restrictor

@runerebel8441

7 ай бұрын

Thanks my friend. Iam glad you like the video.

HDR 68 is a wild beast and great video. Thank you

@runerebel8441

2 ай бұрын

Thanks my friend 😃

awesome test buddy , no matter what configuration these things are a blast to plink with !!! i havent done this test on hdr.59 yet on how much i can drill before it acts up like it didnt have a restrictor !... that would be very interesting also . ... good show as always my brother !

@rick31869

Жыл бұрын

i met .50 not .59 lol

@runerebel8441

Жыл бұрын

Thanks my friend. Great revolvers for sure. Very fun to plink with. Cheers brother 😃

Great video! 👍👍and l00king shArp my friend!! You still got excellent results thanks to your well crafted slugs.💥

@runerebel8441

Жыл бұрын

Thanks my friend 😃

Wow, really impressive !! I will try this trick ! thanks

@runerebel8441

9 ай бұрын

Thanks. Iam glad you like the video 😃

Very consistent

@runerebel8441

7 ай бұрын

Yes. The restrictor regulate the flow of CO2 well.

Love the video, thanks for the test! Any idea where I can get a pre-drilled restrictor? Or a replacement restrictor? Just in case I mess up mine...

@runerebel8441

8 ай бұрын

Thank you. Take a looks at www.homedefence-24.com They sell restrictors and other cool stuff for the markers 😃

That ammo destroyed the can like a BOSS! That 205 fps reading could be a reader error - too much of a sudden drop. Have a great day my friend!

@runerebel8441

10 ай бұрын

Thanks my friend 😃

If you can find a welding supply shop. For tig welding there are fine hole cleaning "probes / Reamers" available They come in sets. On KZread I have heard 1.5 mm hole is good.

@runerebel8441

Жыл бұрын

Thanks for the info 😃

Very interesting Rune…..not a huge increase of power but sure does significant damage to the can!

@runerebel8441

Жыл бұрын

Thanks my friend🙏. Yes it sure hammered the tincan 💥👍

I think the reason why you don't see a significant difference in fps is that there is enough time between each shot to fill the plenum. You won't see any change in fps because every shot only empties the plenum/air chamber. What you could try is how both restrictors behave during rapid fire. Maybe even a test without the restrictor in it. A bigger hole will fill the plenum/airchamber faster which is always better for rapid fire. You could try shooting 5 rounds as fast as you can with the small restrictor and a fresh CO2 and do the same test with a larger restrictor hole (ore no restrictor at all) All you need to measure is the fps of the last shot of both tests. I think / hope the last shot with the bigger restrictor will be faster then the last shot with the stock restrictor hole. 😉

@runerebel8441

5 ай бұрын

Yes that might be true. Cant test this because of my painful and stiff fingers. I strugge to pul the trigger as it is now, not to talk about trying to shot fast. But I think you are right. The power without the restrictor is just 5 joule more, and on the first shot only. I have several videos testing it without the restrictor. 😉

Hello rune, I wandering how do you make a restrictor with an empty 12g capsule. I resently bought a HDR 68 without valve block but only do 5 to 7 shots. I feel it waste a lot of co2 and also think it shouldn't be good for the valve have no moderation. Thanks for your videos.

@runerebel8441

10 ай бұрын

Thanks my friend. Iam glad you like my videos. Take a used 12 gram CO2 canister and xut the tip off. Cut it so it has a diameter of ca 12mm and then you file it down until it fits inside the bottom of the CO2 tube. Optimum size is ca 11,2mm. If the hole in the CO2 canister is larger than 1,5mm then use a punsh or nail and hammer the hole more shut. For strenght ad a drop of glue/epoxy. Make a new hole with a 1mm drill bit. Then just drop it in the CO2 tube and you are readdy for use. It can get stuck in the tube so if you want to remove it later just use a lond round file and fish it out. Good luck 😃

Snygg logo i introt, Rune 👍

@runerebel8441

Жыл бұрын

Mange takk 😃

Liker videoene dine :) har kjøpt HDR68 og Grimsburg HP68. Hvordan ville du modifisert den enklest og billigst mulig? Tenker å bruke 12g co2 og ha nok kraft til 2 magasin.

@MarcLie90

9 ай бұрын

Forøvrig kjøpt 16j versjon på gameon

@runerebel8441

9 ай бұрын

Mange takk. Bor et 1 mm hull i restrictoren som sitter i CO2 røret. Den kan du skru ut med en flat skrutrekker. Det vil gi deg ca 2 magasiner på en 12 gram CO2. Kraften vil da ligge på mellom 25 til 30 joule. Gratulerer med fin revolver. Lykke til :)

@MarcLie90

9 ай бұрын

@@runerebel8441 takker for svar og tips 😊👍

@runerebel8441

9 ай бұрын

Bare hyggelig å kunne hjelpe 😃@@MarcLie90

Jealous of the crest. I quote your 1mm hole all the time and without actual experience trust your judgement and refer viewers to the king Rune himself.

@runerebel8441

Жыл бұрын

Thank you Sean 😃🙏🙏👍

Kan man göra 7,5 joule mer kraftfulla? Funderar på att köpa en !tack för bra videos

@runerebel8441

9 ай бұрын

Mange takk. Hyggelig at du liker videoene mine. Ja det er bare å fjerne valveblock. Se min video hvordan jeg gjør det kzread.info/dash/bejne/fm2Tq5aoZZDepqw.html

Al taladrar el restrictor cuántos disparos puedes lograr vs quitar el restrictor? Alguna diferencia debe haber entre esas dos opciones?

@runerebel8441

11 ай бұрын

If you remove the restrictor you will get ca 5 joule more on the first shot. But the rest of the shots will drop in velocity fast. You will only get ca 7 shots maximum if you dont use the restrictor. Plus the velocity will drop like a stone.

@johnlomax7708

6 ай бұрын

​So just drill tiny hole so u do not have to take the restrictor out or lose pressure fast from CO2 capsule

Where can i get slugs? I live in chile so jts nof very easy id also like to remo e the restrictor from my one

@runerebel8441

Жыл бұрын

Best way is to buy the Ammo6 mould from www.homedefence-24.com He sends all over the world 😃. The restrictor is very easy to remove. Just screw it out with a long flathead screwdriver 🙂

So if you drill it open the force increases?

@runerebel8441

6 ай бұрын

Correct. The flow of CO2 will be larger and the velocity goes up.

Bonsoir quel est selon vous le meilleur diamètre de perçage s'il vous plaît 1 mn ou 1,5 mn merci .

@runerebel8441

3 ай бұрын

Hello my friend. I think 1mm is enough, but it will work fine with 1,5mm also.

@guillaumebermont8019

3 ай бұрын

Thanks you very much my serious Friend 👍🏼

@runerebel8441

3 ай бұрын

Iam glad to help my friend 😃😃@@guillaumebermont8019

Hola amigo, no hablo ingles, pero entiendo lo que escriben. Si agujereo el restrictor a 1 mm de mi HDR 50 habra alguna diferencia ? Tienes algun video con esa prueba ?

@runerebel8441

10 ай бұрын

Hello amigo. Yes you will get a little more power if you drill it to 1mm. But dont drill larger than 1,5mm. Otherwice the gun will start farting and dump CO2 . I dont think I have a video testing this in a stock HDR50 in 11 joule. My 11 joule HDR50 is modded with long barrel etc and gives ca 30 joule now. I think with a factory/orginal 11 joule and a drilled restrictor you will get 20-22 joule depending on ammo and temperature 🤔

@wc1630

10 ай бұрын

@@runerebel8441 Lo hice hoy a la tarde y dispara con mas fuerza, solo que dura 1 ronda solamente. Muchas gracias por compartir y responder dudas.

@runerebel8441

10 ай бұрын

Iam glad to help. Shooting one cylinder is what we want. No time to reload in an emergency. Take care my friend and happy shooting 😃@@wc1630

That blockage is interesting as it didn't seem soluble...? Perhaps a piece of plastic? Doesn't seem likeky to be build up from UMAREX canisters as their product is clean. 😎✌👍❤🖖 Love Brother

@runerebel8441

Жыл бұрын

Yes. Its very strange, but I have seen this happend before. That why I drilled the other restrictor with a 1mm drillbit. It was black collored hard gunk clogging the holes... Maybe from the paint the factory used inside the CO2 tube. Not sure... 🤔 . Cheers brother 😃

Hello, soak overnight the part in automobile transmission fluid with a detergent.

@runerebel8441

Жыл бұрын

Hello. Thanks for the tip. I will try that if it happends again 👍

Hello my man, is the stock firing pin still in the weapon?

@runerebel8441

9 ай бұрын

Hello my friend. Yes the pin is stock 😃

it sounds like there is a restrictor before the air gets to that place you drilled. take caution finding the real restrictor... and if you did not use a larger bit to bevel the edges around the hole you drilled , beveling allows more air to flow through a smaller hole. course i am never telling you what to do . i did not mod my hdr 50, i just tossed the 22joules valve in without further adjustment.

@runerebel8441

Жыл бұрын

Yes. I just drilled the hole. Didnt chamfer the edges. I might try my homemade restrictor and see if there is any diffrence 🤔

@Jff4628

8 ай бұрын

Vous avez changé la valve et sa merche

Hello, i search a origin restrictor co2 for hdp 50 because i have perced my restrictor at 1 mm. For the garanty uma rex , i could install the original restrictor. Thanks

@runerebel8441

3 ай бұрын

Hi. Not sure where you can find a orginal restrictor. You can buy restrictors from www.homedefence-24.com but they dont have the threads. They are just pushed in place. Or you can make one from the tip of a used CO2 canister.

Bonjour vous avez percé le restricteur à 1mm ? Puis-je le faire sur le hdr.50 et Hdr.68 sans conséquence de problème avec le co2?

@RevoLution83

8 ай бұрын

Quel conseil me donnez vous pour ce restricteur merci d'avance

@runerebel8441

8 ай бұрын

Hello my friend. Yes you can drill it with a 1 mm drillbit. That should work fine. But dont go larger than 1,5mm. If you do the gun might start farting or dumping CO2.@@RevoLution83

@RevoLution83

8 ай бұрын

​@@runerebel8441thank you my friend 😊

@runerebel8441

8 ай бұрын

Iam glad to help you my friend @@RevoLution83 😃

I drill my 2mm..i want a fast built up gas again, to get next shot. I still get 18 hard shots.

@runerebel8441

Жыл бұрын

Wow. I didnt think that was possible🤔

hello friend, as I told you about the comments of another video, I drilled the restrictor at 1.5 mm that a machining friend made me so as not to damage the original, after testing at 10 meters I crossed a board that in the original configuration I could not do it with the same projectiles and at the same distance, moreover I noticed a greater recoil of the weapon with the modification. Originally I could shoot 10 full power BBs and 2 BBs with reduced power, since the modification I shoot 8 to 10 full power BBs and then nothing depending on the outside temperature. I use warheads machined at 17.29 mm on a 7.3 gram aluminum digital machine.

@mickaelmoulin7303

Жыл бұрын

if you're interested, I made viseos and photos of the shots at 10 m

@runerebel8441

Жыл бұрын

@@mickaelmoulin7303 Nice. I will take a look if you make videos of it 🙂

Excuse me dear friend, I speak almost no English to clarify my doubt, the restrictor has to be drilled, can't it just be removed? and the other friend in how much power would remain in J cordial greetings

@runerebel8441

Жыл бұрын

You can use it without the restrictor, but power will be almost the same. So depending on ammo and teperature the energy will be 23-27 joule. On a warm day maybe 30 joule

Hi rune I hav 11j hdr50 would u advise taking the valve block out and drill 1mm restrictor or leave valve block in an jus drilling 1mm in restrictor will there b any difference

@runerebel8441

3 ай бұрын

Hi my friend. I recommend you remove the valve-block. The power will rise with 2-4 joule (maybe even more) just from removing it. Drilling the restrictor is for me a must because the small hole in it is easily clogged with dirt. After I drilled my restrictors I have never had any problems. Drill with a 1mm drillbit. No need to go larger.

@TerryDennehy-ic1ot

3 ай бұрын

@@runerebel8441 your the man thanks 💪

Hi Rune! so the 1.0 drilled made more power than 1.5? or i understood wrong?

@runerebel8441

4 ай бұрын

Hi my friend. The power is about the same, but it uses more CO2 with a larger hole. I think 1mm is just fine on this model unless you want max power and remove the restrictor.

@ltlbrazil

4 ай бұрын

@runerebel8441 yeah, but whithout restrictor made max power but less shots... and the max power is not big difference in Joules, right?

@runerebel8441

4 ай бұрын

Correct 😃👍@@ltlbrazil

@ltlbrazil

4 ай бұрын

@@runerebel8441 And together modify pin?

@runerebel8441

4 ай бұрын

The modify pin is for when you dont want to use the restrictor. Its best for the HDR50. The HDR68 can be used with an open valve so its not needed in that model.@@ltlbrazil

This is the 16J?

@runerebel8441

11 ай бұрын

Yes it is 👍

hi friend, is possible to do dieseling with hdr50?

@runerebel8441

2 ай бұрын

Hi my friend. I have not had any dieaseling with any of my markers. Not sure if its even possible.

This mod could negatively affect the gun parts through time, or I shouldn't expect any significant problem?

@runerebel8441

2 ай бұрын

The only problem I can guess might happend is that the heat-core O-ring might pop out or break earlier because of a higher CO2 flow. But I have shot thousands of shots and never had a problem because of this. That O-ring can also pop out if you use a tight ball/slug that can create backpressure. If you lube it with siliconeoil/spray every time before use you shouldnt have any problems.

@diogoribeiro2815

2 ай бұрын

@@runerebel8441 Thank you for your great answer, very thoughful

@runerebel8441

2 ай бұрын

@@diogoribeiro2815 Iam glad to help 😃

Do you are remove the valve block ?

@runerebel8441

8 ай бұрын

This is the 16 joule version. It dont have any valve block, it only has a restrictor in the CO2 tube.

Please can you help me, I have hdx butt when I screw in the co2 88 gram all the gass is coming out 😅 what can i do or what do you think it can be ?

@runerebel8441

2 ай бұрын

Hi. If it blows out the barrel then I guess the heat-core O-ring is broken. Lots of work to fix this but its possible. Just be careful when open it up. Watch videos of how its done before you try to fix it. Good luck

@RobinVanTrigt

Ай бұрын

@@runerebel8441 do you have a video when you do the repair ? End where can I get the parts ?

@runerebel8441

Ай бұрын

@@RobinVanTrigt Hmmm. Good question. I dont think I have one that shows how to work on it. But check out Less Lethal For Dummies channel. He shows you how to work on it. He is quite the expert on paintball markers 😃👍

For a gun novice.. What is Gunk?

@runerebel8441

11 ай бұрын

Residue of some kind. Its clogging the hole in the restrictor

Bonjour juste percer le réducteur à 1 mm vous gagnez déjà un peu plus

@runerebel8441

9 ай бұрын

Hello. Yes I have done so now 🙂👍