That one leftover spring was killing me, this video helped it find its way home. I never would have found it hiding under the safety lever, Thank you.

Greatest video on this subject...Once you master the springs, the rest is cake...I can now do this easily thanks to this video...Straight forward and he did not even have to talk 👍

This was invaluable to me today when all the springs went flying. Thank you. I didn't think I'd ever get it back together again.

@MasakraChannel

3 жыл бұрын

Thanks a lot my friend 😀, I'm glad you managed to put everything together, with "adventure", but but through it you have gained the necessary experience 😅💪

@olafjensen4508

Жыл бұрын

I just lost one

@theandybchannel.1819

Жыл бұрын

@@olafjensen4508 replacement seal kit appears to contain spare springs. Have a search online. Good luck...

@hiddenvintage

10 ай бұрын

My springs were also flying. I lost the sear spring. But with a little patience and determination I wound my own spring. It took multiple tries, and a lot of trial and error. The trigger is now even smoother with the new spring I made. Thanks to this video I managed to see what the spring must look like and copied it with the eyes.

let me start off by saying this is by far the best HDR.50 detailed disassembly/reassembly video out there . i have been modding these and the big canon the HDR.68 and especially my favorite the HDP.50 . i always said one day i will make a video showing people hot to do this but whats the point , THE MASTER "MASAKRA" HAS ALREADY DONE IT . your video cant be beat , it is awesome . when taking the valve out , that trigger seems to always want to jump out , to an untrained airgun gunsmith or someone who just loves to tinker , this can be a real nightmare . !!! lol the best advice i try to give people is keep one hand on all the parts with springs and use that same hand to help the other with installing the valve, bolt and powerful spring . i wish i would have found this video over a year ago , i also had a nightmare with this the first time LOL !!! i suggest every beginner start with the HDP.50 , its by far the easiest to work with and is my favorite so far !!! oh and this video can help people with problems with their HDR.68 ALSO . You are a valuable member in my book to the LESS THAN LETHAL COMMUNITY , THANK YOU FOR ALL YOU DO FOR OUR COMMUNITY MY BROTHER , I KNOW ITS LATE BUT I FINALLY SUBBED TO YOUR CHANNEL , KEEP UP THE GOOD WORK MY FRIEND . !!!!

thank you so much. Springs went flying and I couldnt find a single assemble chart anywhere. Your video saved the gun from the bin.

@MasakraChannel

2 жыл бұрын

Hi, uffffff I'm very glad that you-we managed to avoid the disposal 😮 of the revolver 😀👌 have fun 😀💪

Best disassembling / assembling video for the HDR50. Detailed images of the more 'tricky' sections too Thanks a lot.

@MasakraChannel

2 жыл бұрын

Hi, Thank you very much for this comment, it was great that it is useful 💪

Thank you! I installed Powerkit yesterday and when trigger spring popped out, I wasn’t sure how to put it back. This video saved my day! I tested my upgraded 7,5J version, and I have to say this gun is no joke. 💥👍🏻

@MasakraChannel

2 жыл бұрын

Hello, super, I'm glad👍, thank you very much for this comment, happy shooting 😀cheers 💪

Fantastic, you saved me from going insane, I spent a whole day trying to put those springs back properly, your photography is excellent and shows everything clearly, subbed so that I may learn more from you.

@MasakraChannel

2 жыл бұрын

Hi, Thank you very much, it's great that the movie was useful, I'm also learning something new all the time, good luck 💪

Love the sound track

Thanks brother... you helped me a lot. I was crying over one spring and you showed us detailed assembly. Thank you!

@MasakraChannel

2 жыл бұрын

Hello, I'm very happy reading this comment, and even more so that you managed to solve the problem, thank you very much, enjoy your shooting 🎯💪

Life saver video. Thanks.

I was instaling a power kit but i he didnt show every part to take on so you saved me thank you😁

Thank 1000 times. You help me out. Now HDR is working again.

@MasakraChannel

2 жыл бұрын

Hi, super, I wish you as much fun as possible with HDR 💪

Fantastic work, thanks! Saved my day

@MasakraChannel

3 жыл бұрын

Hi, thanks a lot, happy shooting 😀💪

Came from the valve pin video because the springs fell out and didnt know how to reassemble...my man thank you u saved me 100€ 🤣🤣 but now u are getting a sub for this 😃😃🥳

@MasakraChannel

2 жыл бұрын

Great, thanks for this comment, I'm very happy 😃 100€ is a nice sum, you can already buy something good 😃 Cheers 😃💪

Very good learning video. Well done

JESTEŚ SUPER GOŚĆ !!!

@MasakraChannel

3 жыл бұрын

Hej, dziękuję bardzo 😊😃💪

thanks!!! a lot

Thank you for the video Masakra, it's perfect. I want change the valve power kit and mount a new large steel barrel. Thanks a lot from Spain!

@MasakraChannel

3 жыл бұрын

Thanks a lot, I'm very glad to hear that 😃 ooo perfect, what barrel pattern did you choose? 💪

Thank you!!!

@MasakraChannel

2 жыл бұрын

Thanks a lot💪

Very helpful my man thank you 💯💯💯

That is a brilliant video and tutorial thank you

@MasakraChannel

3 жыл бұрын

Thank you very much for this comment, i'm very glad 😃💪

thank you my friend !

@MasakraChannel

2 жыл бұрын

You're welcome, have fun 💪

Thanks mate... great video 😄

@MasakraChannel

3 жыл бұрын

Thankas a lot 😃💪

salut 😀po prostu najlepszy film z demontażu i ponownego montażu Hdr50💪💪

@MasakraChannel

3 жыл бұрын

Salut my friend 🦾 moltes gràcies 😄🦾

Thanck you very much !!! 🦅💪✌

@MasakraChannel

3 жыл бұрын

I'm very glad that this video is helpful, thanks a lot my friend 😀💪

Good job !

Thanks again for your videos! As with the Umarex HDP, it was easy to dismantle the weapon. Have a good time and stay healthy. Greetings Peter

@MasakraChannel

2 жыл бұрын

Hello Peter, thank you very much, I am very happy 😃. Cheers 💪

Awesome... very ... very very good Video

@MasakraChannel

2 жыл бұрын

Hi, Thank you very much 💪

Excellent work again, thanks for sharing.

@MasakraChannel

3 жыл бұрын

I am very glad, thank you very much my friend 😃 are you testing something new?💪

@theandybchannel.1819

3 жыл бұрын

@@MasakraChannel waiting for my mould, got some different colour glue sticks and two different guns to try. I have a lot of 8mm bbs here, so hoping they will be a nice fit?

@MasakraChannel

3 жыл бұрын

Great 😃 , yes, 8mm will be perfect, sometimes with bigger ones is a problem, it all depends on how carefully you make them 💪 sometimes they don't come out perfectly at first, but it gets better with each new production 😃💪

@theandybchannel.1819

3 жыл бұрын

@@MasakraChannel ive seen few videos, an prepared for plenty of fuck ups before I get it perfect. Thanks again

@MasakraChannel

3 жыл бұрын

No problem my friend 🤠🦾

Łapy w górę zgodnym chórem 😎👍

@MasakraChannel

3 жыл бұрын

Dzięki wielkie Wojtas 😃 testujesz coś nowego aktualnie? 💪

@guns_n_shooting_passion

3 жыл бұрын

@@MasakraChannel niestety nie mam czasu ani nowych zabawek ;/ Na wiosnę, gdy poprawi się pogoda zrobię nowe video z HDR50 bo nie mam krytej miejscówki niestety.

@MasakraChannel

3 жыл бұрын

ok, super 😄🦾

This is a very demanding and stressful undertaking. While waiting for my upgrade part to arrive I watched countless FIY videos and thought it through relentlessly. Finally, after one day of procrastination I proceeded. I used strapping tape, sometimes multiple pieces for the 5 main springs. Then as an extra safety feature I used a sheet of Saran cellophane wrap; which I covered the entire piece I was working on. I dine this in case the tape didn't hold and one of the springs did what it does naturally. I also used a a medium sized C clamp to put back the ultra tight spring in the interior barrel. Saying it went without a hitch is wishful thinking, but keep in mind this was my first attempt and it did go off with just about no problems. The problems I'm referring to was getting all the tape off without causing a spring mishap. This is not to say it will work flawlessly for everybody, but it can't hurt to think it through.

you rock

@MasakraChannel

3 жыл бұрын

Thank you very much 😊😃💪

Bien filmé, merci 🍻✌

@MasakraChannel

3 жыл бұрын

Merci beaucoup 🍻🦾

Najlepszy 😎😁

@MasakraChannel

3 жыл бұрын

Dziękuję 🤠😀💪

Exelent video my friend :)

@MasakraChannel

3 жыл бұрын

I am very glad, thank you very much my friend 😃💪

Gracias amigo 👍

@MasakraChannel

3 жыл бұрын

Thank you my Friend 😃 are you currently testing something new? 😃💪

@ingreible66

3 жыл бұрын

@@MasakraChannel Not for the moment.

@MasakraChannel

3 жыл бұрын

@@ingreible66 ok, I will follow you 😃💪

Hello from America, I know I'm going off topic, but I find it more important to say. You are the classic Russian I come across in my day to day life including how to videos on KZread. And I have to say when I say classic I mean incredibly smart on many subjects. Russians seem very approachable, kind and friendly. They seem to want to help others and go out of their way to teach others almost to a fault. I'm sure you have criminal area's like everywhere else but generally Russia seems to be a place where people are happy. We seem to be very similar people and I can't see if we were neighbors we would have any problems. So why are both our Governments hard headed and don't get along. I find the Chinese people the same, and yet if you listen to the media at least here you would think we were going to wake up to ww3. I wish both, all governments would look to help each other. Maybe I smoked to much today. It just struck me.

big big thanks from Kurdistan for over a year my gun was out of order because i disarmed it and i didn't get it right before this video 👌👌👌👌👌👌

@MasakraChannel

2 жыл бұрын

Hi, Great, I am very happy that it worked, Greetings to you and Kurdistan 💪

Ja, nach diese video anleitung wird weniger fragen von Leuten! Gute video!..

@MasakraChannel

3 жыл бұрын

Vielen Dank 😃 There are never too many questions, I care more that everyone can help themselves at any time 💪 Danke noch einmal 😃💪

Thank you so much for making this video, I just found out what I needed..the small springs are hard to work with when you have big fingers..Now I'm using my magnifying 🔎glasses..Off to the hardware store to find springs...I got so frustrated I ordered another marker..Question I have the TR50, and got the power kit ,I think there is only 2 parts to change out on this model..plus I got the updated barrel.. When you said that you work on the markers to help with stress ,I realized why I got involved with this project.. Thank Again. Wayne T

@MasakraChannel

3 жыл бұрын

Hello, I'm glad you made it, so you have to replace two parts and take one out, replacing the barrel will also help. Yes, such a little DIY and testing is a nice escape from your daily chores and worries 😀 Thank you Wayne T. good luck 🤠💪

extraordinario video pero dudo que pueda yo mismo cambiar los oring ,de seguro me sobrarian piezas o las perderia ,te felicito por tu espertiz ...saludos desde Chile Masakra 💪💪💪💪

Ciao amico tutto bene 😊

@MasakraChannel

3 жыл бұрын

Hey amico mio , grazie 😃 ti auguro una buona serata amico mio 😃💪

Tolles Video. Dankeschön !! Abo ist raus .

@MasakraChannel

3 жыл бұрын

Hallo, du bist willkommen !!, viel Glück.

Zawsze gdy coś rozkręcam i skręcam spowrotem to zostają niepotrzebne śrubki:)

@MasakraChannel

Жыл бұрын

;DDDD

I just got one a few weeks ago, and they put lock-tight on the inner valve, making it almost impossible to get out. I had to use needle nose pliers and channel locks to get it out.

Great video. Especially the one with the length of the screws. Can you measure the diameter of the screws as well?

So I’m curious how does the trigger mechanism activate the Co2 air to release? When observing this video I don’t see how this works! Very interesting

4:30 Wybijanie blokady gazowej Z tym miałem ogromny problem! Spasowanie fabryczne było tak dobre, że cholerstwo nie chciało się ruszyć z miejsca. Wydaje mi sie że na filmie pokazujesz już ruszoną blokadę! bo za łatwo jak dla mnie wyskakuje, ale mogę sie mylić. Nie wiedziałem, że dla sukcesu trzeba ostrze śrubokręta OPRZEĆ tam wewnątrz o krawędź bloku, a nie wybijać z rozmachu próbując trafić. W rezultacie machając śrubokrętem naruszyłem (????) tą wpuszczoną małą zieloną uszczelkę, nic się jej fizycznie nie stało tylko prawdopodobnie naruszył się jej układ. Efekt? WYCIEK gazu w miejscu tej uszczelki (brak uszczelnienia z pinem) Oczywiście o wycieku dowiedziałem się dopiero w momencie kiedy prawie złożyłem całość. Blokade musiałem zdjąć dopasowując wiertło (6mm do drewna) średnicą do otw. wewn. i na imadle używając jako wybijaka. Być może jakbym wiedział że tam w srodku trzeba śrubokręt OPRZEĆ to bym to wybił w rękach. No cóż bywa. WYCIEK zlikwidowałem WYJMUJĄC uszczelkę i dokładnie czyszcząc jeszcze raz tamto miejsce. Być może od suwania śrubokrętęm zrobił sie jakiś paproch ale opiłków nie widziałem (cały czas czołówka). Żałowałem trochę tego wyciągania bo miałem wrażenie że maltretuję uszczelkę. Wkładanie znowu w oparciu o wiertło 6mm dla podparcia Przeczyściłem dokładnie i prze-psikałem sprajem silikonowym. Trzyma.

@MasakraChannel

3 жыл бұрын

Hej, na tym filmie jest nowy rewolwer i pierwsze wyciągnięcie bloku, (we wcześniejszym filmie robiłem to już wcześniej 5-6 razy wcześniej), ejjjj pewnie że trzeba oprzeć , w końcu trzeba to wybić, nie ma sensu machanie śrubokrętem na oślep, albo jak już machać to przynajmniej pod odpowiednim kątem żeby trafić w krawędź bloku. Jak jest nowy na początku są takie dwie małe wypustki zabezpieczające blok przed wysunięciem, nie da się wyjąć bloku bez ich uszkodzenia, dlatego wybijanie jest lepsze i szybsze, niewielka siła jedno-dwa dobre uderzenia i temat ogarnięty, próbując go wyciągnąć od przodu jest trudniej , ale tylko za pierwszym razem jak są jeszcze nie uszkodzone wypustki.

Gratitude for this video, I now know I'm missing the smallest spring, would you know if spare springs are available, and where I could get them ,meny thanks for any help,..

Mi właśnie po oddaniu maks 150 strzałów pojawiła się nieszczelność ale od strony magazynka. Gaz ucieka po przebiciu kapsuły tak mocno że mogę oddać około 6-8 strzałów w krótkim czasie. Oddawać do serwisu czy do ogarnięcia samemu?

Mam taką przypadłość, że przy przebijaniu naboju CO2 jest jeden samoczynny wystrzał. Czym to jest spowodowane?

After putting back together after installing 11 joule valve, i have a problem maybe 1 out of 10 shots. A jackhammering sound. Like multiple air bursts with a single trigger pull. Any help would be appreciated. Thanks

@MasakraChannel

2 жыл бұрын

Hi, the best way to get rid of the problem is to disassemble and reassemble the revolver, paying particular attention to the seals and springs, in 99% of cases it helps. Hope you managed to fix the problem?

Witam! Czy kule po wystrzale nadają się do ponownego użycia?

@rodrigojose2096

Жыл бұрын

Depende da munição e onde se atira.

Trzymałem swój pistolet w szafcce przez długi okres czasu zapomniałem go rozładować z CO2 i niestety czarna komora gdzie wsadza się kapsułe CO2 rozdzieliła się z tym zaworem CO2. Zastanawiam się czy trzeba kupić cały element czy wystarczy trochę kleju z żywicą epoksydową i dobicie tej komory na co2 do zaworu ? Miał ktoś podobny przypadek ?

czesc, masz moze do sprzedania zawor iglicowy do hdr50? w moim niestety gwint jest zerwany

@MasakraChannel

4 ай бұрын

Cześć, niestety nie mam, ale widzę że cena zestawu serwisowego poszła w dół www.balistas.pl/zestaw-serwisowy-umarex-t4e-hdr-50

Where can I find the Umarex T4E Diagram Online? I live in Brazil and I have difficulty finding information and requests about UMAREX.

Ogromnie przydatny film. Szacunek! HDR super zabawka. W moim jest jednak problem z tzw. timigiem. Zdarza się, że kiedy strzelam, to po naciśnięciu spustu bębenek się obraca, a strzał następuje dopiero po 1-2 sekundach. Nigdy nie jest tak za pierwszym strzałem z bębna, trzeci i czwarty bywają opuszczone. Co ciekawe, nie zdarzało się to na amunicji dewastator. Może chodzi o masę pocisku ,a tym samym bębna, może o zbyt ciasne pociski, pracę palca na spuście? Masz jakiś pomysł?

@MasakraChannel

2 жыл бұрын

Cześć Piotr, dzięki wielkie, zdarzyło mi się podobnie ale niestandardowymi kulkami, wrażenie jakby się blokowały, a innym razem podobne wrażenie ale okazało się że na szybko niedokładnie złożyłem rewolwer po wcześniejszym jego rozłożeniu na części, przez co po strzale bębenek niedokładnie ustawiał się w pozycji , wyglądało to tak jakby po naciśnięciu spustu kulka delikatnie blokowała się o kant otworu w bębenku, ale pod wpływem siły przestawiała bębenek do właściwego położenia i wylatywała, bębenek wykonywał delikatny ruch, minimalny, ale wystarczyło żeby na ułamek sekundy zablokować kulkę.

@piotrdoba9365

2 жыл бұрын

@@MasakraChannel Wielkie dzięki. Też odnoszę takie wrażenie, będę badał temat.

@MasakraChannel

2 жыл бұрын

Nie ma za co, daj znać jak coś uda Ci się stwierdzić.Pozdrawiam.

Do you know if there is a video on HDR 50 Power Kit for 7.5 Joule version. The only one's I've seen are for the 11 Joule version?

@MasakraChannel

2 жыл бұрын

Hi, yes, you do everything similar, you can find the movie here 💪 www.homedefence-24.com/pages/youtube-videos

@mick1583

2 жыл бұрын

@@MasakraChannel Thanks for that. I will work through it if DHL ever decide to deliver the Power Kit they've had since 25/09/2021.

@MasakraChannel

2 жыл бұрын

I keep my fingers crossed for it to succeed 💪

@mick1583

2 жыл бұрын

@@MasakraChannel Lost in the system by Royal Mail's incompetence.

Hi, thanks for the vid... One question, after reassembly my triggersafety wont work. Any idea? All parts are in place...

@MasakraChannel

3 жыл бұрын

Hi, Although sometimes it looks ok, it's mostly something wrongly mounted, send me a picture if you can on fb 💪

@haydarkavak7582

3 жыл бұрын

Allready found the issue. The new Barrel is to thick. I used spacers in the front mount of the Barrelhousing...

@MasakraChannel

3 жыл бұрын

Great, what kind of barrel do you use?

@haydarkavak7582

3 жыл бұрын

@@MasakraChannel homedefence-24 one

@MasakraChannel

3 жыл бұрын

ok thanks for the info, let me know your opinion, after you shoot a bit with this barrel 🦾

Has anyone tried a 3.5" 16g CO2 cartridge instead of a the standard 3.25" 12g cartridge?

!!!🛑🛑🛑ATTENTION PLEASE I WANT TO KNOW WHAT HAPPENED WITH MASAKRA🛑🛑🛑!!!

Help anyone? My part at 10:32 doesn't work like that! It is VERY loose. and spring is put correctly. im about to throw parts into trash

@peqkz4184

Жыл бұрын

Edit: I made a Short video about this problem also

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

hello... après debridage mon barillet ne fait plus "clic" quand je l'insère... il tourne à la main ce qui n'est pas normal... quelqu'un peu m'aider ? je crois que j'ai un problème avec le remontage des ressorts... merci

@MasakraChannel

2 жыл бұрын

Hi, probably the spring on the barrel is not in place. Try to remove the barrel and twist the spring so that its end (the end of the spring wire) does not hit the edge of the cover. Spring should fit snugly on the left and right sides for mounting in the cover. Please, let me know if you managed to solve the problem, and if so, how. Merci et bonne chance.

@charlylc2b

2 жыл бұрын

@@MasakraChannel thx... it was the spring of the black part above the trigger: badly pressed, it came the closure of the aluminum carcass and prevented the part from working... 😉

@MasakraChannel

2 жыл бұрын

nice that we managed to fix it, thanks for this info, cheers

Thank you so much for this clip. Umarex seem to have changed how they make their guns now, so all my springs flew out when I tried to release the pressure part

Thanks man you saved me😂 all my springs came loose and I had no idea how to put it back together