Ultimate YAMAHA Ténéré 700 RALLY BUILD

Автокөліктер мен көлік құралдары

Presenting my latest build, this time for my very own Yamaha Ténéré 700. This time I needed to build an Adventure bike that would be capable of participating in the Sardinia Legend Rally but at the same time I wanted a setup that I could keep for a dual purpose all the year. Long is the list of accessories I installed and which I will list in the next weeks once I have some time. Hope you enjoy the video! I already have another T7 to build this summer that I want to turn into a very special and unique edition with a new Rally Kit.
You want a Yamaha Ténéré 700 custom build and design? YES I do Custom Rally Builds for anyone, send me an email at lucchesemanuel@gmail.com
WHERE TO ORDER EACH ACCESSORY?
Rally Kit: rebelxsports.com/product/tene...
Seat Cover: rebelxsports.com/product/yama...
Carbon Bashplate: rebelxsports.com/product/tene...
www.rebelxsports.com (most accessories were supplied by Rebel X)
#Yamaha #Tenere700 #Adventurebike #RallyKit
Filmed with: Canon R6 + 24-70mm F2.8 + GoPro Hero 9 + Insta 360 + DJI Mavic Air
Edited with: Premiere Pro
Editor: Giacomo Lucchese

Пікірлер: 183

  • @MrBigPipesYT
    @MrBigPipesYT Жыл бұрын

    Cool, I was curious how racers were shedding up to 50lbs from their T7's. Swap headlight, exhaust/cat delete header, tail tidy/signal delete, ABS/front disk delete, lithium battery, carbon bash plate. Swap out hardware for titanium. Swap out rear wheel for 2". Great tip for moving the OEM headlight closer to the frame. Carbon fiber handlebars are available too. I'd be interested to see carbon spokes as carbon has strong tensile strength. Or perhaps even swapping out half of the spokes for carbon to reduce drag and rotational mass. Good to see such a positive review of the steering damper as well.

  • @JohannesDalen
    @JohannesDalen3 жыл бұрын

    English with an italian accent is so awesome!

  • @everythingtenere
    @everythingtenere3 жыл бұрын

    Can’t wait for the suspension video 🤩, great walkthrough m8

  • @AzMtnThumper
    @AzMtnThumper3 жыл бұрын

    Incredible build! Looking forward to the next video.

  • @ricardomastroieni334
    @ricardomastroieni3343 жыл бұрын

    I love your work and development of bikes.

  • @briantheminer
    @briantheminer3 жыл бұрын

    Even stock, this has to be the best ADV bike currently out there

  • @jbmectronic4314

    @jbmectronic4314

    3 жыл бұрын

    Agreed, I ride Enduro 450cc and have a Ténéré as a road/advbike, it really is awesome.

  • @jurgenwauters9458
    @jurgenwauters94583 жыл бұрын

    Yes yes, more Ténéré, please!! While i wait for mine to be delivered ⏳⏳⏳⏳😮‍💨😏😁

  • @efraimadventure
    @efraimadventure3 жыл бұрын

    BRAVO!! Nice "Horse" to race and have some fun. Nice set up, improve functionality and beauty.

  • @mrtwoyou5549
    @mrtwoyou55493 жыл бұрын

    Absolutely stunning build ,,Good Luck in all future rally's

  • @stevebiron3036
    @stevebiron30363 жыл бұрын

    ML Has the best content and attention to detail. Excellent info, well done mate.

  • @chrisbouris3699
    @chrisbouris36993 жыл бұрын

    And thats my dream bike, Bro. Congratulations

  • @Checkyoursix77
    @Checkyoursix773 жыл бұрын

    Great build! Interesting to hear more about the digital road book.

  • @ManuelLucchese1

    @ManuelLucchese1

    3 жыл бұрын

    Will make a dedicated video, need a few weeks so that I can track and design a roadbook locally to use for the video :)

  • @RoadToDesert
    @RoadToDesert3 жыл бұрын

    Really an INSANE bike my friend!!! And, a big YES for one video about digitale Nav!!

  • @Elskins
    @Elskins3 жыл бұрын

    Beautiful bike. Great build as always 👍

  • @emker7772
    @emker77723 жыл бұрын

    All the bikes you build are beautiful. I love that dakar look.

  • @ManuelLucchese1

    @ManuelLucchese1

    3 жыл бұрын

    I have in the plans to make a super Dakar inspired Tenere this summer, can't wait to get that project rolling!

  • @longkeithdiablo8812
    @longkeithdiablo88123 жыл бұрын

    What a great looking bike. Good job 👍

  • @jacopodamonte886
    @jacopodamonte8863 жыл бұрын

    Grande manuel... video sempre chiarissimi e attacca scimmie pazzeschi 😛

  • @Jotx
    @Jotx2 жыл бұрын

    Amazingly build. I'd love to set up mine with most of the gadgets !!!

  • @hugobaert7737
    @hugobaert77373 жыл бұрын

    😍😍😍 more Tenere would be sweet as

  • @glenlodge6779
    @glenlodge67793 жыл бұрын

    Wicked set up 👍

  • @robsonenduro3316
    @robsonenduro33163 жыл бұрын

    this skid plate is awesome, gonna buy it.

  • @xxxamuel
    @xxxamuel3 жыл бұрын

    So you basically kept the engine and the chasis haha love the bike! The fairing is so much nicer than the original one

  • @johnmitchinson4196
    @johnmitchinson41963 жыл бұрын

    Excellent video and report Manu

  • @markdownes3572
    @markdownes35723 жыл бұрын

    It would be good to see more on the digital road book . Bike looks great 👌🏻

  • @DanielComin
    @DanielComin3 жыл бұрын

    Interesting to hear more about the digital road book.

  • @paulderbyshire1255
    @paulderbyshire12553 жыл бұрын

    digital roadbook review sounds great

  • @jackmilan74
    @jackmilan743 жыл бұрын

    Grande Manuel, come sempre tantissimi spunti interessanti

  • @ManuelLucchese1

    @ManuelLucchese1

    3 жыл бұрын

    Grazie mille!

  • @segaraputra5696
    @segaraputra56962 жыл бұрын

    Tenere and Africa twin is one of the most handsome good looking adv bike

  • @martin4819
    @martin48192 жыл бұрын

    Really nice build and have a great appreciation for all the work u put into it! Noticed your radiator guard is stock. I highly recommend the OEM upgrade. It’s looks a lot better in my opinion and it’s also lighter. SKDA is an awesome company to work with!

  • @Incalvideo
    @Incalvideo2 жыл бұрын

    So many great tips, thanks for sharing =)

  • @rodmcisaac3
    @rodmcisaac33 жыл бұрын

    Yes. More T 7.

  • @polyphonus2435
    @polyphonus24353 жыл бұрын

    Great build man. Do you know the total weight lost of your bike compared to a factory one?

  • @LookattheBiggerPic
    @LookattheBiggerPic3 жыл бұрын

    Quite the build! I would love to see more on the Rally Raid Suspension - I guessing you went with their 230mm Closed Cartridge up front and 230mm shock in the rear - I also purchased these for my T7 though have yet to install due to Not having a place to rework the forks for the moment... Much thanks for sharing so much detail!

  • @sauttersmotochannel7320
    @sauttersmotochannel73203 жыл бұрын

    This is a mindblowing build!! Great Inspiration thank you very much! It would be super interesting to hear your experience with the digital RB. Will you do the Trans Italia Marathon on that bike?

  • @ellisgrant8083
    @ellisgrant80833 жыл бұрын

    Great Video, would love to hear more about the digital road book and the Suspetion Cheers

  • @tenereman4491
    @tenereman44913 жыл бұрын

    Super video 🤟

  • @NomadSweden
    @NomadSweden3 жыл бұрын

    Fantastic! I want it!

  • @markwatson2946
    @markwatson29463 жыл бұрын

    Awesome

  • @Sledgehammer123456
    @Sledgehammer1234563 жыл бұрын

    More in the Tenere please!

  • @rotor676
    @rotor6763 жыл бұрын

    Very nice build. Would love to see a Video on KTM690 on how to completely removing the ABS system, like you did on this bike.

  • @KIM_AdventureExplorer
    @KIM_AdventureExplorer3 жыл бұрын

    Mitico sei sempre sul pezzo...sei un artigiano...anzi un inventore/innovatore. Fai un bel video sul Carpe per farci sapere come ti trovi e se ne vale la pena la spesa....Sembra a parte i comandi, comprando un tablet android qualsiasi in commercio si risparmia molto

  • @vonarg
    @vonarg3 жыл бұрын

    Very nice build, and it was very informative about why you decided to changes some parts ! I would like to know what is the weight now after the modifications compared to stock ?

  • @declanokeeffe2382
    @declanokeeffe23823 жыл бұрын

    As a XT 500 owner, I found this interesting, tanx

  • @Davefranzin
    @Davefranzin3 жыл бұрын

    What a job Manuel.....sei il migliore...dimmi un pò ci vai alla Dakar?

  • @skuomno
    @skuomno3 жыл бұрын

    Good work Manuel!

  • @RogerCampillo

    @RogerCampillo

    3 жыл бұрын

    Sto barbone Cotti!! Ti seguo!! Non mi vedi ma io a te si!! Spero ritrovarti presto!

  • @skuomno

    @skuomno

    3 жыл бұрын

    @@RogerCampillo ciao bello!!!! A presto!

  • @robertonostromo82
    @robertonostromo823 жыл бұрын

    Really very good job Manuel ; it's fantastic..grande!!

  • @edwardlocke874
    @edwardlocke8743 жыл бұрын

    Awesome video and your bike is beautiful! Where can I get the headlight? I want one asap !

  • @barkeep25
    @barkeep253 жыл бұрын

    Looks so sweet, but no tail tidy???

  • @keyboarddancers7751
    @keyboarddancers77513 жыл бұрын

    Fantastic build. 18.59 Selle Dalla Valle!

  • @stefanhenne7487
    @stefanhenne74873 жыл бұрын

    Manuel, great stuff! Would love to see a video about a T7 adventure built with your own bash plate and fairing. Can your newly developed fairing with the small, but powerful and lightweight headlight also be purchased with a "see through" wind screen? Maybe tinted?

  • @ManuelLucchese1

    @ManuelLucchese1

    3 жыл бұрын

    Thanks!!! At the moment no plans for a transparent windshield but might be towards end of the year.

  • @graysonchurch262
    @graysonchurch2622 жыл бұрын

    Wow! Great development 🤘🏻 are all these upgrades going to be available soon as a complete kit from rebel x as a one stop shop option please? If so, approximate price please?

  • @tarif84
    @tarif843 жыл бұрын

    Amazing build bro looks like a dakar bike!!!How about total weight of the bike?

  • @nuovovideo
    @nuovovideo3 жыл бұрын

    Bravissimo

  • @VineV-Dutch
    @VineV-Dutch9 ай бұрын

    Build a Desert X for a nice change. Don't see so many on your channel... As tall rider, 1,98mtr, I find many bikes to low. My knees aren't straight in 90° angle which makes getting up/standing up hard on the knees. Riders from Western Europe and Scandinavia have problems with this a lot. The Desert X is one of the highest off road biased motorcycle for us to focus on for us. Especially the new rally addition with 2 cm higher suspension and so, 2 cm higher seat height at above 90cm. This a a lot better for tall riders of the newer generation. Every generation gets taller and taller. But our cars, matresses, chairs, tables, offices and motorcycles don't grow with us unfortunately. But now Ducati gives us an opportunity.

  • @DB-me3jt
    @DB-me3jt3 жыл бұрын

    Great build..., just not sure about that headlight.

  • @fabiofrigato6130
    @fabiofrigato61302 жыл бұрын

    ciao Manuel sempre bellissimi video... ci dai un link per trovare la staffa per spostare la strumentazione sul manubrio?

  • @danielgomezsalazar1327
    @danielgomezsalazar13272 жыл бұрын

    Hi, really nice build. Do you have any comments on rally raid 230mm suspensions ?

  • @franzforman7816
    @franzforman78162 жыл бұрын

    Manuel your T7 killed me! I own my own built KTM690 Rally and I have also built my own Cagiva Eelfant 750 Rally. The Cagiva is a legend but 220kg full still tricky to go with if it get slippery - the KTM is brutal wiht power and challanges me often when it get very selective - I am not a Trail rider working a lot with clutch. So thats why your T7 builts makes me crying - it looks awesome but also the changes you made are those one I did on my bikes too - the question is how heavy is your built T7? I love watching your channel - please go forward! Thxs Franky

  • @Noillek
    @Noillek3 жыл бұрын

    Please review the digital road book

  • @arthurmoto1956
    @arthurmoto19562 жыл бұрын

    It's a great pleasure for me to see big Yamaha modded for a real racing! Just some notes. I reckon that front brakes are weak. They may be enough on a slippery surface but in a forest they are useless. This front master cylinder has 10 mm piston and it can stop only YZ125. We use old style 2007 11 mm masters and calipers with 27 mm 2 pistons on everything 250-450. Personally I use on my XT660Rally billet Braking floating 32 mm two piston caliper, EBC MXS pads, EBC 320 mm supermoto single rotor, Magura radial 13 mm master, braided line. It's just incredible set, linear, powerful and with long lever travel that allows me very accurate braking but can stop front wheel if I need. What piston size does your slave cylinder have? And what's about forks? Why didn't you use KYB SSS or any other twin-chamber forks?

  • @mariusklein5441
    @mariusklein54412 жыл бұрын

    Hi Manuel, when do you add the full accessory list? And the can is the estimated date for release the dashboard handlebar mount? Thanks in advance

  • @Webby750
    @Webby7502 жыл бұрын

    Hey bud what are the exact handlebars you have on there . excellent build as usual

  • @Fradant123
    @Fradant1233 жыл бұрын

    fai un video dedicato al Roadbook digitale e su come si usa e su i suoi pro e contro

  • @r.j.n.604
    @r.j.n.6043 жыл бұрын

    Want to hear your opinion on digital road book. Thx

  • @stephaneolivier8924
    @stephaneolivier89242 жыл бұрын

    Really nice bike, I love it !! Only one question, why don’t you change the licence plate holder, which is too long in the original ?? Any recommendations for a new one ? Yamaha short plate holder accessory is OK ? Thanks

  • @marcserdet8356
    @marcserdet8356 Жыл бұрын

    Where can I get the headlights? Fantastic build

  • @keithnisbet
    @keithnisbet3 жыл бұрын

    What would this group of mods cost? It’s a beautiful project, of course I’m wondering about the financial side. ThNks

  • @Paledaddy
    @Paledaddy2 жыл бұрын

    We want more videos about the bike, the suspension and the digital roadbook... plzplz

  • @RogerCampillo
    @RogerCampillo3 жыл бұрын

    Grande Manuel!! Bellissima sta T700!! Io ci sto pensando a venderé tutto (Roadbook, ico, Gps…) es usare un Carpe iter, quindi ti prefiero di fare questo video dedicato al tablet. In piu mi piacerebbe sapere, come fai a controllare il trip master dal manubrio? Lo stesso conotrollo Bluetooth del Carpe iter to serve coi due botoncini? Per ajustare la lettura del trip ai valori indicati sul roadbook. Grazie Manuel! Grande lovoro!!

  • @davidepalmisano5515
    @davidepalmisano55153 жыл бұрын

    buongiorno maunel è possibile sapere la marca del faro anteriore a led? gran lavoro!!!

  • @MotorDanko
    @MotorDanko3 жыл бұрын

    I would like you to create a full windshield + side fairing for the ktm 790/890 adv, using the stock headlight:D

  • @ERUtheWINDRIDER

    @ERUtheWINDRIDER

    3 жыл бұрын

    +1

  • @estebanroman8897
    @estebanroman88972 жыл бұрын

    did you ever do the video about the suspension?

  • @marcelquer
    @marcelquer Жыл бұрын

    Very nice 👌 But only the Headlight weight is 2kg

  • @Fradant123
    @Fradant1233 жыл бұрын

    quanto ti è costato tutto? tutte queste bellissime modifiche? così semmai uno si compra un Tènerè normale e tu mi fai tutte le modifiche 🤩

  • @1jbunceiii
    @1jbunceiii3 жыл бұрын

    I am always amazed.... question....why doesn't a manufacturer just build the bike we want. So we don't have to deal with building our own.

  • @ManuelLucchese1

    @ManuelLucchese1

    3 жыл бұрын

    Thanks!!! But see it in this way, if they built the perfect bike then it would take away the fun of customising it and spending endless hours and nights in the garage hehehhe

  • @Fradant123
    @Fradant123 Жыл бұрын

    Molto bella | li vendi i componenti che hai installato?

  • @fun2rideadventure
    @fun2rideadventure7 ай бұрын

    ...the headlamp is from Ktm Exc from 14-23 models :D

  • @tenerejeff5176
    @tenerejeff51763 жыл бұрын

    Hey Manuel, great video lots of details. What brand is the front light?

  • @ManuelLucchese1

    @ManuelLucchese1

    3 жыл бұрын

    The front headlight you can find here: www.motea.com/it/faro-led-per-ktm-exc-exc-f-freeride-enduro-smc-14-21-fanale-anteriore-xdure-lm6-a031011-0?gclid=5h0pp1n9-it&gclid=Cj0KCQjw8IaGBhCHARIsAGIRRYom4Z43ucOp7CkEP_6BRn385xiha_p1d73Q5E8ozr5GmR9X9PfCHlUaAoJgEALw_wcB

  • @Skatafossy
    @Skatafossy3 жыл бұрын

    Lavoro come sempre STRAORDINARIO.....il commento un inglese, anche se capisco bene l'esigenza, lo trovo irritante :)

  • @jellybean8495
    @jellybean84952 жыл бұрын

    Great content on Tenere-subscribed and thanks :). I really like the sound of the Protaper YZ High bend bars being lower and a little narrower . I know it’s a custom setup but any idea if the standard lever break/clutch perches, Indicators, engine starter, etc would fit on that bar (reduced width)? I also like the Protaper clutch and Break lever, would the break lever fit in the standard break lever perch too?

  • @ManuelLucchese1

    @ManuelLucchese1

    2 жыл бұрын

    Thanks! For sure all the oem indicators switches etc would fit. Taking off the end of the oem bars (that bulky section where the handguards are mounted) the oem bar is actually narrower and the YZ slightly wider (providing better stability). The clutch lever yes would fit but then you would have no mount for left mirror and handguard. The brake lever no it would not fit without changing the brake pump

  • @wynnxc2820
    @wynnxc2820 Жыл бұрын

    Very curious what you did with the clutch switch. Did you tape it up or just start it in neutral?

  • @josemateo2645
    @josemateo26452 жыл бұрын

    In order to install the 2.5 wheel, did you have to change the brake disc?

  • @josephfelice601
    @josephfelice6013 жыл бұрын

    Great job and classy look. What size rear sprocket are you running? Did you have to change the chain size? Thanks

  • @ManuelLucchese1

    @ManuelLucchese1

    2 жыл бұрын

    We are running the 520 chain with rear 48T sprocket, makes the bike more responsive and more fun to ride on technical sections

  • @stratoskatsipidis9395
    @stratoskatsipidis9395 Жыл бұрын

    Rear and front sprocket size please !! Chain pitch 520????

  • @leonardobattaglia8041
    @leonardobattaglia80413 жыл бұрын

    Ciao, nessuna protezione sui carter, come mai? Protezioni al leveraggio della sospensione posteriore? L'originale sembra molto esposto

  • @gustavoromerolp
    @gustavoromerolp Жыл бұрын

    Hey Manuel, what is the name/brand of the Headlight do you have a link to buy it?

  • @kochj0713
    @kochj0713 Жыл бұрын

    How did you get all the weight down low? Wayyyyyy top heavy stock

  • @ujjroland1693
    @ujjroland16932 жыл бұрын

    Do you know approximately how much weight were you able to save?

  • @diegodonato5156
    @diegodonato5156 Жыл бұрын

    buongiorno Manuel, una domanda ma per eliminazione ABS totale come impianto bisogna intervenire anche sulla centralina o basta smontare tutti i componenti e montare un impianto tradizionale grazie

  • @naegelip
    @naegelip3 жыл бұрын

    congrats on that build... maybe i missed the info, what tablet you use ?

  • @ManuelLucchese1

    @ManuelLucchese1

    3 жыл бұрын

    Carpe Iter

  • @graysonchurch262
    @graysonchurch262 Жыл бұрын

    Where can I buy the led headlight replacement unit please?

  • @Gwiedert
    @Gwiedert Жыл бұрын

    Can I have the partnumber of the exact brake pump that is being used?

  • @blackbur3825
    @blackbur38252 жыл бұрын

    which protaper handlebar model is it?

  • @Multi5201
    @Multi5201 Жыл бұрын

    Which type of protaper bar is this??

  • @Toonces311
    @Toonces3112 жыл бұрын

    Suspension video?

  • @Benitoh52
    @Benitoh522 жыл бұрын

    Crear video!! Which rear shock do you use? Thanks!

  • @ManuelLucchese1

    @ManuelLucchese1

    2 жыл бұрын

    Rally raid UK rear shock

  • @frebuton2016
    @frebuton20163 жыл бұрын

    HI Manuel, Awesome Tenere 700! I love all your build videos. I have a (front) suspension question: I have the same Rally Raid fork set-up (5.6Nm Springs) with Scott's damper on mine. I ride 50/50 onroad-offroad with my T700. I'm using Motoz Rallz tires with tubes. Over 100km/h, I get a strong headshake/pendelum effect from the front. I'm blaming the knobby tires, but wonder if you can recommend other tricks (besides going back to a 50/50 tire) to reduce the headshake. Your fork tubes look flush with the triple clamp. Mine peek out 7mm. My sag is setup to my weight of 90kg, but I play around with compression and rebound without much success yet. Cranking the steering damper all the way on helps, but slow speed steering is no fun. Any tricks you could share?

  • @wonkywheels1037

    @wonkywheels1037

    3 жыл бұрын

    I have the rally raid inserts too -6.0Nm spring, Steering damper. The shock re-valved with a 8Nm spring. The standard spring is only 6.0Nm. Way too soft. I run Dunlop 909 front and Moto Rallz on the rear. I don't have headshake at any speed. I feel your headshake may not be the tyres. Are the wheels balanced? Are the tyres fitted to the rim correctly? Loose spokes? I hope you find the problem.

  • @tenerejeff5176

    @tenerejeff5176

    3 жыл бұрын

    I have the Rally Raid too, 6Nm springs 8Nm on the rear. I run MT21 Pirelli Front and Motoz Tractionator rear. I have also run the same tyres as you. I have no head shake, as Woftamduke said, check the wheels are balanced and true. Play around with fork height and Sag. I can do 160 - 170km dirt or blacktop and the bike feels stable.

  • @frebuton2016

    @frebuton2016

    3 жыл бұрын

    @@wonkywheels1037 Thank you for your suggestions. Yes, the wheels are true, balanced and we checked the spokes (spoke torque wrench). My next plan was to mount a different front tire and see if it improves. but I wonder if playing more with compression or rebound would help. Lower tire pressure seems to help a little.

  • @danstevens2204
    @danstevens22043 жыл бұрын

    No money left for chain lube?

  • @Welter87
    @Welter87 Жыл бұрын

    is the headlight street legal?

  • @Revy8
    @Revy8 Жыл бұрын

    i think the t7 is agreat platform, but this is perhaps not ideal. personally I would mod a 450 for rally.

Келесі